ORCID Profile
0000-0003-4803-2872
Current Organisation
Curtin University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Springer Science and Business Media LLC
Date: 11-03-2023
DOI: 10.1007/S00170-023-11169-8
Abstract: Plastic materials have been widely used to replace metals in functional parts due to their lower cost and comparable technical properties. However, the increasing use of virgin plastic material in consumer and industrial applications has placed a significant burden on waste management due to the volume of waste created and the potential negative effects of its end-of-life processing. There is a need to adopt circular economy strategies such as plastic recycling within industrial applications in order to reduce this significant waste management pressure. The present study used recycled polylactic acid (PLA) material as a feedstock for the 3D printing of a centrifugal semi-open pump impeller. The technical performance of 3D printed recycled PLA material and virgin PLA material was compared in this study. The environmental impacts for technically feasible impellers were assessed through the environmental life cycle assessment, while costs were evaluated by life cycle costing. The results were incorporated into a techno-eco-efficiency framework to compare the technical properties, environmental impacts, and costs. The social impacts of additive manufacturing and recycled feedstock material were also explored. The technical assessment results indicated that tensile strength, fatigue strength, density, and hardness decreased with recycled material content compared to virgin material. Microscopy of the fracture surfaces revealed the presence of slightly higher porosity and defects in recycled specimens, which could result in slightly lower technical properties. However, the recycled material was accepted for further ecological analysis as it offered higher pumping performance when compared to the original component and could reduce the burden on virgin material-based production and waste material disposal. Importantly, the results showed that 3D printed recycled PLA impellers are more eco-efficient when compared to 3D printed virgin PLA impellers.
Publisher: Research Square Platform LLC
Date: 06-04-2022
DOI: 10.21203/RS.3.RS-1464266/V1
Abstract: The economic, environmental, and social impacts caused by the extensive resource consumption and harmful emissions from the metal manufacturing industry should be lowered through innovative sustainable manufacturing strategies. This study aims to investigate the techno-eco-efficiency performance of metal additive manufactured (AM) parts in comparison with metal subtractive manufactured (SM) parts to determine the technical, economic, and environmental performance as a decision support tool for selecting the most techno-eco-efficient manufacturing method. In this study, a novel metal extrusion AM technology has been used to create a centrifugal semi-open pump impeller in 316L stainless steel material. The technical feasibility of the impellers has been determined by evaluating the geometry, build material, mechanics, morphology, and functional performance of the impellers. The eco-efficiency performance of technically feasible impellers was evaluated through environmental life cycle assessment, life cycle costing, and portfolio analysis. The findings reveal that AM impeller’s higher normalised costs (43.8%) have been offset by its lower normalised environmental impacts (54.6%) compared to the SM impeller. The centrifugal semi-open pump impellers made by the novel metal AM technology are technically feasible, cost-effective, and environmentally friendly compared to their SM counterparts.
Publisher: Elsevier BV
Date: 04-2023
Publisher: Springer Science and Business Media LLC
Date: 23-07-2022
DOI: 10.1007/S00170-022-09748-2
Abstract: The economic, environmental, and social impacts caused by the extensive resource consumption and harmful emissions from the metal manufacturing industry should be lowered through innovative sustainable manufacturing strategies. This study aims to investigate the techno-eco-efficiency performance of metal 3D-printed parts in comparison with CNC-machined parts to determine the technical, economic, and environmental performance as a decision support tool for selecting the most techno-eco-efficient manufacturing method. In this study, a novel metal extrusion 3D printing technology has been used to create a centrifugal semi-open pump impeller in 316L stainless steel material. The technical feasibility of the impellers has been determined by evaluating the geometry, build material, mechanics, morphology, and functional performance of the impellers. The eco-efficiency performance of technically feasible impellers was evaluated through environmental life cycle assessment, life cycle costing, and portfolio analysis. This eco-efficiency analysis helped ascertain the cost-competitiveness and environmentally friendliness of the 3D-printed impellers by comparing it with the conventional impellers. The findings reveal that the AM impeller is eco-efficient mainly due to lower normalised environmental impacts (54.6%) compared to the SM impeller. The functional parts made by metal extrusion 3D printing are technically feasible, cost-effective, and environmentally friendly compared to the SM counterparts.
Publisher: IEEE
Date: 07-2020
Publisher: Research Square Platform LLC
Date: 03-11-2022
DOI: 10.21203/RS.3.RS-2164695/V1
Abstract: Plastic materials have been widely used to replace metals in functional parts due to their lower cost and comparable technical properties. However, the increasing use of virgin plastic material in consumer and industrial applications has placed a significant burden on waste management due to the volume of waste created and the potential negative effects of its end-of-life processing. There is a need to adopt circular economy strategies such as plastic recycling in industrial applications in order to reduce this significant waste management pressure. This study used recycled polylactic acid (PLA) material as a feedstock for the 3D printing of a centrifugal semi-open pump impeller. The technical performance of 3D printed recycled PLA material and virgin PLA material was compared. The environmental impacts for technically feasible impellers were assessed through environmental life cycle assessment, while costs were evaluated by life cycle costing. The results were incorporated into a techno-eco-efficiency framework to compare the technical properties, environmental impacts, and costs. The social impacts of additive manufacturing and recycled feedstock material were also explored. The technical assessment results showed that tensile strength, fatigue strength, density, and hardness decreased with recycled material compared to virgin material. Microscopy of the fracture surfaces revealed the presence of slightly higher porosity and defects in recycled specimens, which could result in slightly lower technical properties. The recycled material was however accepted for further ecological analysis as it offered higher pumping performance when compared to the original component and could reduce the burden on virgin material-based production and waste material disposal. Importantly, the results showed that 3D printed recycled PLA impellers are more eco-efficient than 3D printed virgin PLA impellers.
No related grants have been discovered for Heshan Jayawardane.