Rachel Popelka-Filcoff

A multidisciplinary investigation of a rock coating at Ngaut Ngaut (Devon Downs), South Australia

Publisher: Informa UK Limited

Date: 06-2015

DOI: 10.1080/03122417.2015.11682042

HyLogger™ near-infrared spectral analysis: a non-destructive mineral analysis of Aboriginal Australian objects

Publisher: Royal Society of Chemistry (RSC)

Date: 2014

DOI: 10.1039/C3AY41436A

Understanding the Mineralogical Composition of Ancient Greek Pottery through Raman Microprobe Spectroscopy

Publisher: SAGE Publications

Date: 10-2002

DOI: 10.1366/000370202760355046

Abstract: Mineralogical studies using Raman microprobe spectroscopy and high-magnification optical spectroscopy were performed on sherds of pottery vessels that were used as cooking pots and water jars in Hellenistic Greece (third and second century BC). Of specific interest was the mineralogical identification of the so-called inclusions, which are phases that morphologically stand out from the fired clay matrix and result from the presence of inorganic temper in the original paste mixture. The sizes of mono- and polymineralic inclusions in the sherds range from 5 μm to 2 mm. The combined use of Raman microprobe spectroscopy and incident-light optical microscopy permits identification of specific minerals (such as quartz, albite, calcite, hematite, anhydrite, epidote, rutile, anatase, and apatite) in various different types of inclusions and then visual evaluation of the abundance of those minerals in each s le. The application of our nondestructive analytical approach is documented on a set of four sherds (each on the order of several cm 2 ) from excavations of the ancient Agora of Athens. The information on the mineralogy obtained via Raman spectroscopy can shed light on the provenance of the raw materials and firing conditions of the pottery and thus aids archeologists with their historical interpretations.

Comparison of the relative comparator and k₀neutron activation analysis techniques for the determination of trace-element concentrations in pyrite

Publisher: Mineralogical Society

Date: 10-2012

DOI: 10.1180/MINMAG.2012.076.5.04

Abstract: Thirty pyrite s les from a wide range of localities were analysed using relative comparator and k 0 neutron activation analysis (NAA) techniques at the University of Missouri Research Reactor, Columbia, Missouri, USA (MURR) and the Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW, Australia (ANSTO), respectively. Statistical analyses of the trace-element data produced by the two methods showed a generally good correlation, with the majority of elemental concentrations of paired data reported by MURR and ANSTO being indistinguishable at a 0.05 significance level. Trace-element analyses of pyrite from Navajún in Spain by both techniques compare well with published data. There is evidence for contamination by Al, Na and Ti in one set of s les, this is likely to have been introduced by contact with a plastic used in s le preparation.

Neutron irradiation in activation analysis: A new rabbit for the NBSR

Publisher: Springer Science and Business Media LLC

Date: 28-11-2008

DOI: 10.1007/S10967-008-1501-1

Microbial composition analyses by 16S rRNA sequencing: A proof of concept approach to provenance determination of archaeological ochre

Publisher: Public Library of Science (PLoS)

Date: 18-10-2017

DOI: 10.1371/JOURNAL.PONE.0185252

Phase Analysis of Australian Uranium Ore Concentrates Determined by Variable Temperature Synchrotron Powder X-ray Diffraction

Publisher: American Chemical Society (ACS)

Date: 22-07-2021

DOI: 10.1021/ACS.INORGCHEM.1C01562

CHEMICAL ANALYSIS OF GLASS BEADS FROM MADAGASCAR

Publisher: Brill

Date: 25-10-2006

DOI: 10.3213/1612-1651-10064

Abstract: Chemical analysis of 31 glass beads from the sites of Mahilaka and Sandrakatsy in Madagascar, which date to approximately the 9 th to 15 th centuries CE, reveals the presence of two main types of glass: mineral- soda glasses and plant-ash glasses. Most of these glasses were probably made in South Asia.

Elemental analysis and characterization of ochre sources from Southern Arizona

Publisher: Elsevier BV

Date: 03-2008

DOI: 10.1016/J.JAS.2007.05.018

Trace element characterization of ochre from geological sources

Publisher: Springer Science and Business Media LLC

Date: 03-02-2007

DOI: 10.1007/S10967-006-6836-X

Radionuclides and stable elements in vegetation in Australian arid environments: Concentration ratios and seasonal variation

Publisher: Elsevier BV

Date: 08-2021

DOI: 10.1016/J.JENVRAD.2021.106627

Evaluation of relative comparator and k 0-NAA for characterization of Aboriginal Australian ochre

Publisher: Springer Science and Business Media LLC

Date: 26-06-2011

DOI: 10.1007/S10967-011-1236-2

Thermal decomposition of Australian uranium ore concentrates: characterisation of speciation and morphological changes following thermogravimetric analysis

Publisher: Springer Science and Business Media LLC

Date: 30-06-2016

DOI: 10.1007/S10967-016-4871-9

Analysis of elemental and isotopic variation in glass frictionators from 0.22 rimfire primers

Publisher: Elsevier BV

Date: 12-2018

DOI: 10.1016/J.FORSCIINT.2018.10.017

Abstract: The majority of 0.22 calibre rimfire ammunition available in Australia, and overseas, tends to use glass powder rather than antimony sulfide frictionator in the primer. This glass can be the nucleus of a GSR particle, with other primer components condensing around and onto the glass structure. As the composition of glass frictionator remains largely unaltered during ammunition discharge [1] there is the possibility that frictionator composition could be used in GSR examinations to either correlate or discriminate between s les, thereby providing valuable information to an investigation. In this study, the composition of glass frictionator from a wide variety of ammunition was analysed by time-of-flight - secondary ion mass spectrometry (ToF-SIMS), sensitive high-resolution ion microprobe (SHRIMP) and scanning electron microscopy - energy dispersive X-ray spectrometry (SEM-EDS). Refractive index (RI) was measured using glass refractive index measurement (GRIM). Across the population of ammunition studied, it was found that the elemental and isotopic composition of frictionator varied. ToF-SIMS was able to discriminate 94.1% of brands in a pairwise comparison and SEM-EDS achieved a pairwise discrimination power of 79.4%. If SHRIMP was combined with the other two techniques, 95.6% of brands could be discriminated. Refractive index measurements supported the elemental data showing that there appeared, in most cases, to be only one population of glass within a cartridge. The results suggest that there is scope for frictionator analysis to contribute valuable, new capability to forensic GSR examinations.

Glass fragments from portable electronic devices: Implications for forensic examinations

Publisher: Elsevier BV

Date: 12-2015

DOI: 10.1016/J.FORSCIINT.2015.10.023

Abstract: Personal electronic devices (PEDs) are now widespread in the community. Many such devices have glass display screens that, despite being a relatively strong and specialised material, are vulnerable to breakage. Unlike other glass objects that are usually thrown away when they break, PEDs can still function with a broken or cracked screen and it is not uncommon for their owners to keep using them in this condition. Broken PED screens, therefore, might represent a new and significant source of glass fragments that are present on the clothing and belongings of the general public and in iduals suspected of offences involving the breaking of glass. The forensic implications of this new source of glass fragments in the community were investigated. PED glass is easily recognised using scanning electron microscopy-energy dispersive X-ray analysis and refractive index measurement and is easily distinguished from domestic and automotive soda-lime glass using these methods as a consequence there should be no confusion of soda-lime glass fragments and PED glass fragments in forensic glass casework. In cases where the objective is to compare recovered glass fragments to a putative PED source, comparison using refractive index measurement and elemental analysis achieves good discrimination between sources.

Coating Fe2O3 with graphene oxide for high-performance sodium-ion battery anode

Publisher: Elsevier BV

Date: 10-2016

DOI: 10.1016/J.COCO.2016.09.004

CHEMICAL ANALYSIS OF ANCIENT AFRICAN GLASS BEADS: A VERY PRELIMINARY REPORT

Publisher: Brill

Date: 25-10-2003

DOI: 10.3213/1612-1651-10006

Abstract: We report the preliminary results of chemical analysis by laser ablation-inductively coupled plasma-mass spectrometry of 156 glass beads from sites in southern Africa. Almost all of these beads can be grouped in two chemical types based on oxide compositions and glass recipes. Glasses of these types were manufactured in south and/or southeast Asia. These are the first results of a project that will analyse about 1000 beads from African archaeological sites.

Microelemental characterisation of Aboriginal Australian natural Fe oxide pigments

Publisher: Royal Society of Chemistry (RSC)

Date: 2015

DOI: 10.1039/C5AY01547B

Abstract: This manuscript presents the first comprehensive microcharacterisation of Fe oxide minerals used in Aboriginal Australian mineral pigments.

1500 Years of Pottery: Neutron Activation Analysis of Northern Chilean Domestic Ceramics from Caleta Vitor and Clay Samples from Nearby Valley, Coast and Highland Contexts

Publisher: Wiley

Date: 16-12-2016

DOI: 10.1111/ARCM.12277

Hematite sources and archaeological ochres from Hohokam and O’odham sites in central Arizona: an experiment in type identification and characterization

Publisher: Elsevier BV

Date: 11-2011

DOI: 10.1016/J.JAS.2011.06.030

Armed with the Facts: A Method for the Analysis of Smokeless Powders by Ambient Mass Spectrometry

Publisher: American Chemical Society (ACS)

Date: 06-08-2020

DOI: 10.1021/JASMS.0C00193

Non-labile silver species in biosolids remain stable throughout 50 years of weathering and ageing

Publisher: Elsevier BV

Date: 10-2015

DOI: 10.1016/J.ENVPOL.2015.05.017

Abstract: Increasing commercial use of nanosilver has focussed attention on the fate of silver (Ag) in the wastewater release pathway. This paper reports the speciation and lability of Ag in archived, stockpiled, and contemporary biosolids from the UK, USA and Australia, and indicates that biosolids Ag concentrations have decreased significantly over recent decades. XANES revealed the importance of reduced-sulfur binding environments for Ag speciation in materials ranging from freshly produced sludge to biosolids weathered under ambient environmental conditions for more than 50 years. Isotopic dilution with (110 m)Ag showed that Ag was predominantly non-labile in both fresh and aged biosolids (13.7% mean lability), with E-values ranging from 0.3 to 60 mg/kg and 5 mM CaNO3 extractable Ag from 1.2 to 609 μg/kg (0.002-3.4% of the total Ag). This study indicates that at the time of soil application, biosolids Ag will be predominantly Ag-sulfides and characterised by low isotopic lability.

Novel application of X-ray fluorescence microscopy (XFM) for the non-destructive micro-elemental analysis of natural mineral pigments on Aboriginal Australian objects

Publisher: Royal Society of Chemistry (RSC)

Date: 2016

DOI: 10.1039/C5AN02065D

Abstract: This manuscript presents the first comprehensive non-destructive micro elemental characterisation of mineral pigments used on Aboriginal Australian objects.

Glass-containing gunshot residues and particles of industrial and occupational origins: Considerations for evaluating GSR traces

Publisher: Elsevier BV

Date: 05-2019

DOI: 10.1016/J.FORSCIINT.2019.03.010

Abstract: In an ideal case, the value of traces would be determined numerically and presented through the use of likelihood ratios or verbal-equivalent scales. A problem in the evaluation of gunshot residue (GSR) evidence using these models is that in many shooting scenarios insufficient data exist to support a quantitative model of interpretation. The complex relationship that exists between ammunition composition and post-firing residues makes quantitative interpretation more difficult for GSR than for other traces such as glass. When evaluating the significance of traces in a quantitative model, the value of a trace is reduced as the number of random sources that could produce the trace increases. Previously published works have suggested that glass-containing GSR (gGSR), which is glass encrusted with lead (Pb) and barium (Ba) residues, are a new type of GSR not already classified under ASTM E1588 - 17. If random sources of particles resembling gGSR are rare, then gGSR may be valuable evidentiary traces. In order to potentially incorporate these particles into a future model, the general background prevalence of gGSR and specific sources capable of producing similar particles must be understood. Therefore, particles from fireworks, matches, and cartridge actuated nail guns were assessed on an in idual basis and at a population level. These sources, known to produce particles resembling GSR, were assessed using backscattered electron - scanning electron microscopy - energy dispersive X-ray spectroscopy analysis (BSE-SEM-EDS) for the presence of glass-containing particles that resemble gGSR. In the experiments described in this article the nail gun produced particles compositionally indistinguishable from gGSR, due to the primer in the brand of nail gun cartridges used containing glass as the frictionator in addition to Pb and Ba compounds. In this study, no particles were located from fireworks or matches that were indistinguishable from gGSR, nor was any evidence observed or found in the literature that would suggest that such particles could be formed.

An exploration of the ceramic technology of a northern Chilean community, evidence from the Caleta Vitor Archaeological Complex

Publisher: Elsevier BV

Date: 08-2022

DOI: 10.1016/J.JASREP.2022.103492

Copper removal using bio-inspired polydopamine coated natural zeolites

Publisher: Elsevier BV

Date: 05-2014

DOI: 10.1016/J.JHAZMAT.2014.03.048

Abstract: Herein, for the first time, natural clinoptilolite-rich zeolite powders modified with a bio-inspired adhesive, polydopamine (PDA), have been systematically studied as an adsorbent for copper cations (Cu(II)) from aqueous solution. Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA) revealed successful grafting of PDA onto the zeolite surface. The effects of pH (2-5.5), PDA treatment time (3-24h), contact time (0 to 24h) and initial Cu(II) ion concentrations (1 to 500mgdm(-3)) on the adsorption of Cu(II) ions were studied using atomic absorption spectroscopy (AAS) and neutron activation analysis (NAA). The adsorption behavior was fitted to a Langmuir isotherm and shown to follow a pseudo-second-order reaction model. The maximum adsorption capacities of Cu(II) were shown to be 14.93mgg(-1) for pristine natural zeolite and 28.58mgg(-1) for PDA treated zeolite powders. This impressive 91.4% increase in Cu(II) ion adsorption capacity is attributed to the chelating ability of the PDA on the zeolite surface. Furthermore studies of recyclability using NAA showed that over 50% of the adsorbed copper could be removed in mild concentrations (0.01M or 0.1M) of either acid or base.

Early vitrification stages identified in prehistoric earthenware ceramics from northern Chile via SEM

Publisher: Elsevier BV

Date: 12-2017

DOI: 10.1016/J.JASREP.2017.09.011

Methods for analysis of glass in glass-containing gunshot residue (gGSR) particles

Publisher: Elsevier BV

Date: 05-2019

DOI: 10.1016/J.FORSCIINT.2019.03.019

Abstract: When lead, barium and antimony, or lead, barium, calcium, silicon and tin are found together in particles associated with a shooting investigation they are considered characteristic of gunshot residue (GSR). Antimony and tin are often absent from the primer of many low calibre rimfire ammunitions, which are the type most commonly used in Australia. Therefore, the likelihood of characteristic particles forming during the firing process of such rimfire ammunition is significantly less than the likelihood of these particles arising from higher calibre ammunition. The majority of rimfire ammunition examined in this research contains ground glass in the primer, which functions as a frictionator. These ammunitions produce a small number of gunshot residue particles containing glass coated with other primer components, which we refer to as glass-containing GSR (gGSR). If these particles are observed in an investigation, they have the potential to add a new dimension to gunshot residue analysis because they are not common in the environment. Furthermore, the composition of glass frictionator is stable during firing, which raises the possibility that chemical testing of the glass in gGSR may be used to identify the ammunition from which the residue was derived or to link deposits of GSR. This paper examines the application of scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDS), focussed ion beam (FIB) techniques and time of flight-secondary ion mass spectrometry (ToF-SIMS) to the semi-quantitative analysis and comparisons of gGSR and frictionator extracted from unfired cartridges. SEM-EDS is effective for comparing gGSR with unfired frictionator, but the use of FIB to expose clean glass from the centre of gGSR followed by ToF-SIMS, or ToF-SIMS using ion sputtering to expose clean glass, offers more power for comparisons due to their capability for higher discrimination between frictionators from different sources.

Disentangling the chemistry of Australian plant exudates from a unique historical collection

Publisher: Proceedings of the National Academy of Sciences

Date: 26-05-2022

DOI: 10.1073/PNAS.2116021119

Abstract: For millennia, Aboriginal Australian peoples have used the extraordinary physicochemical properties of plant exudates from practical applications to cultural expression. We employ state-of-the-art spectroscopy to characterize the molecular compositions of well-preserved, native Australian plant exudates ( Xanthorrhoea , Callitris , Eucalyptus , and Acacia ) from a historic collection assembled over a century ago. This work demonstrates the benefits of X-ray Raman spectroscopy for the analysis of these complex natural systems. It provides key information for a broader understanding of their terpenoid, aromatic, phenolic, and polysaccharide composition and subsequent chemical classification. It complements Fourier-transform infrared and pyrolysis–gas chromatography–mass spectrometry by allowing bulk-sensitive analysis in a fully noninvasive manner and probes molecular features which remain silent in these commonly employed analyses.

Distinct Chemical Patterns in Late Mississippian Caborn-Welborn Ceramics of the Lower Ohio River Valley

Publisher: SAGE Publications

Date: 07-2003

DOI: 10.2190/PT2Q-AV4X-UAWX-EJ1A

Abstract: Trace element analysis was conducted on ceramics from Mississippian Caborn-Welborn sites located in the lower Ohio River Valley. Elemental concentrations were measured for each sherd using both neutron activation analysis (NAA) and particle-induced X-ray emission (PIXE). By using principal components analysis and posterior discriminant analysis, it was possible to compositionally distinguish lower Ohio Valley ceramics from ceramic s les collected from archaeological sites located in the southeastern part of the United States. Similar statistical analyses applied to an examination of the elemental composition of Caborn-Welborn ceramics and their distribution within the Caborn-Welborn region documented minimal variation between the s les based on either site location or ceramic type. Ceramics classified as Caborn-Welborn as well as central Mississippi Valley types and Oneota-like sherds recovered from Caborn-Welborn sites appear to have been locally produced from similar clays. However, the clays used to produce ceramic vessels differed from those used as daub on house walls.

Instrumental Neutron Activation Analysis of Ochre Artifacts from Jiskairumoko, Peru

Publisher: American Chemical Society

Date: 16-08-2007

DOI: 10.1021/BK-2007-0968.CH026

Southern African glass beads: chemistry, glass sources and patterns of trade

Publisher: Elsevier BV

Date: 08-2010

DOI: 10.1016/J.JAS.2010.02.016

Determining the origins of particulates on Arkaroo Rock art

Publisher: PAGEPress Publications

Date: 12-02-2014

DOI: 10.4081/ARC.2014.5301

Abstract: Arkaroo Rock, an important Aboriginal art site located in the Flinders Ranges National Park, South Australia, features a range of artworks created using red and yellow ochre along with white minerals (such as kaolinite, and gypsum) and charcoal. The site is widely promoted to tourists and, during peak season, attracts more than fifty visitors each day. In mid 2007, the local indigenous community noted that the art was covered with a dust-like substance, the nature of which was unknown. It was hypothesised that the substance was the result of local soil adhering to the surface of the artwork with the morning dew. In order to preserve the site, cleaning and conservation work began in early 2008. This study presents an investigation into the source of the particulate matter covering the artworks. Prior to the conservation work commencing, s les were collected from various locations on the rock, within the protective fence surrounding the artwork, and the surrounding soil. Plant s les were also collected proximal to the artwork. A number of techniques were used to characterise and identify the origin of the particulate material from the rock surface. These techniques included optical microscopy, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), colour analysis based on the ES-1000 EFI spectrophotometer (UV-Vis), and subsequent multivariate statistical analysis. Results of this study are presented here, including detailed results obtained from an emerging colour-based ES-1000 EFI spectrophotometer method along with TGA, optical microscopy and XRD. Results confirm the presence of morning dew in surface s les, and eliminate local sources as the origin of the particulate matter.

Determination of the f parameter for k 0-neutron activation analysis at the Australian 20 MW OPAL research reactor

Publisher: Springer Science and Business Media LLC

Date: 15-05-2013

DOI: 10.1007/S10967-013-2542-7

Seeing red: an analysis of archeological hematite in east central Missouri

Publisher: Springer Science and Business Media LLC

Date: 2020

DOI: 10.1007/S12520-019-00984-4

Regional ochre procurement in the prehistoric American Bottom

Publisher: Elsevier BV

Date: 10-2023

DOI: 10.1016/J.JASREP.2023.104191

Cultural Heritage Project at  Australian Nuclear Science and Technology Organisation (ANSTO)

Publisher: Springer International Publishing

Date: 2022

DOI: 10.1007/978-3-030-60016-7_15

Ochre, flint and violence: an Aboriginal history of the Ma:ko region (Overland Corner)

Publisher: Informa UK Limited

Date: 03-07-2022

DOI: 10.1080/03721426.2022.2111055

The archaeometry of ochre sensu lato: A review

Publisher: Elsevier BV

Date: 2022

DOI: 10.1016/J.JAS.2021.105530

Engravings and rock coatings at Pudjinuk Rockshelter No. 2, South Australia

Publisher: Elsevier BV

Date: 04-2018

DOI: 10.1016/J.JASREP.2017.12.044

Gunshot residue and brakepads: Compositional and morphological considerations for forensic casework

Publisher: Elsevier BV

Date: 2017

DOI: 10.1016/J.FORSCIINT.2016.11.024

Abstract: Previous research has raised the possibility that automotive brake pads can produce particles that are both compositionally and morphologically similar to gunshot residue (GSR). These studies, published in the early 2000s, coincided with the reduction or removal of unnecessary sources of lead from the automotive industry. The question therefore arises whether modern brake pads might still be a relevant source of 'GSR-like' particles. In the present study, a total of 75 brake pads taken from a range of cars currently on the road in Adelaide, South Australia, were collected from service centres. These pads were screened by XRF, and 12 were selected as representatives of the types of pads available on the market. Some pads generated XRF results for elements particularly relevant to GSR analysis. Signals for barium and antimony were commonly observed, with some pads showing results possibly attributable to lead. The surfaces of these 12 pads were directly s led using aluminium stubs equipped with carbon-filled adhesive tape. Following this, they were screened using SEM-EDS and an automated GSR particle search in order to detect particles containing lead, barium or antimony. No particles containing all of these elements were found, although a large number of particles containing both barium and antimony were located. Other particulate s les were collected using stubs from persons or objects associated with brakes in order to examine whether particles similar to GSR might be present on them. No three-component particles were detected in s les collected from the wheel rims or the hands of those exposed to automobiles. From this study of common, contemporary cars, brake pads and brake pad technicians, it was determined that the possibility of obtaining three-component 'GSR-like' particles from brake pads appears to be much lower now than when this issue was first raised in the early 2000s. While some brake pads do produce particles containing barium and antimony, they are often angular particles that contain sulphur. Furthermore, these 'GSR-like' particles are commonly found together with an abundance of particles containing iron. The particle evidence evaluated in total allows clear differentiation between residues originating from brakes and residues originating from firearms.

Tandem detection of organic and inorganic gunshot residues using LC–MS and SEM-EDS

Publisher: Elsevier BV

Date: 09-2020

DOI: 10.1016/J.FORSCIINT.2020.110389

Consumption and exchange in Early Modern Cambodia: NAA of brown-glaze stoneware from Longvek, 15th–17th centuries

Publisher: Public Library of Science (PLoS)

Date: 13-05-2019

DOI: 10.1371/JOURNAL.PONE.0216895

Towards identification of traditional European and indigenous Australian paint binders using pyrolysis gas chromatography mass spectrometry

Publisher: Elsevier BV

Date: 11-2013

DOI: 10.1016/J.ACA.2013.09.012

Abstract: We report a pyrolysis GC-MS method capable of analysing Indigenous Australian and European binders typically used in the manufacture of culturally important painted works. Eleven different traditional European binders and ten different Indigenous Australian binders were examined. The method allows discrimination between highly complex and impure lipid, resin, polysaccharide, wax, and protein-based binders. Each was found to have characteristic pyrolysis products that were unique to the binder material, demonstrating the potential for differentiation of these binders on Australian Aboriginal artworks towards identification and conservation of cultural heritage.

University Of Melbourne

Location: Australia

View Organisation

Flinders University

Location: Australia

View Organisation

Linkage Projects - Grant ID: LP190100933

Start Date: 03-2021

End Date: 03-2021

Amount: $385,000.00

Funder: Australian Research Council

Discovery Projects - Grant ID: DP190102219

Start Date: 06-2019

End Date: 12-2024

Amount: $478,500.00

Funder: Australian Research Council

Linkage Infrastructure, Equipment And Facilities - Grant ID: LE170100177

Start Date: 2017

End Date: 12-2018

Amount: $290,000.00

Funder: Australian Research Council

Linkage Infrastructure, Equipment And Facilities - Grant ID: LE130100115

Start Date: 2013

End Date: 12-2013

Amount: $180,000.00

Funder: Australian Research Council

Linkage Projects - Grant ID: LP200300886

Start Date: 06-2022

End Date: 06-2027

Amount: $1,035,819.00

Funder: Australian Research Council

Industrial Transformation Research Hubs - Grant ID: IH130200033

Start Date: 06-2015

End Date: 06-2020

Amount: $2,526,617.00

Funder: Australian Research Council

Linkage Projects - Grant ID: LP160100160

Start Date: 12-2016

End Date: 12-2022

Amount: $280,000.00

Funder: Australian Research Council

Linkage Projects - Grant ID: LP210200165

Start Date: 12-2022

End Date: 12-2026

Amount: $624,955.00

Funder: Australian Research Council

Discovery Projects - Grant ID: DP200100559

Start Date: 11-2020

End Date: 12-2024

Amount: $695,700.00

Funder: Australian Research Council