ORCID Profile
0000-0003-4984-6093
Current Organisation
Hamad bin Khalifa University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: IEEE
Date: 2006
Publisher: Optica Publishing Group
Date: 18-11-2009
DOI: 10.1364/OL.34.003619
Publisher: IEEE
Date: 11-2010
Publisher: The Optical Society
Date: 10-03-2011
DOI: 10.1364/OE.19.005565
Publisher: IEEE
Date: 2008
Publisher: IEEE
Date: 2008
Publisher: IEEE
Date: 2003
Publisher: The Optical Society
Date: 28-01-2019
DOI: 10.1364/OE.27.002478
Publisher: Optica Publishing Group
Date: 28-04-2017
DOI: 10.1364/OE.25.010651
Publisher: Elsevier BV
Date: 06-2021
Publisher: IEEE
Date: 05-2012
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 05-2020
Publisher: IEEE
Date: 10-2006
Publisher: IEEE
Date: 2004
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 09-2016
Publisher: IEEE
Date: 2003
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 11-2019
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 06-2009
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 10-2018
Publisher: Springer Science and Business Media LLC
Date: 08-04-2021
DOI: 10.1557/S43578-021-00188-4
Abstract: Wearable electronic devices are evolving from current rigid configurations to flexible and ultimately stretchable structures. These emerging systems require soft circuits for connecting the various working units of the overall system. This paper presents fabrication of soft circuits by electrohydrodynamic (EHD) inkjet-printing technique. Multi-nozzle EHD printing head is employed for rapid fabrication of electric circuits on a wide set of materials, including glass substrate (rigid), flexible polyethylene terephthalate (PET) films, and stretchable thermoplastic polyurethane (TPU) films. To avoid the effects of substrate materials on the jettability, the proposed multi-nozzle head is equipped with integrated in idual counter electrodes (electrodes are placed above the printing substrate). High-resolution circuits (50 ± 5 µm) with high electrical conductivity (0.6 Ω □ −1 ) on soft substrate materials validate our well-controlled multi-nozzle EHD printing approach. The produced circuits showed excellent flexibility (bending radius ≈ 5 mm radius), high stretchability (strain ≈ 100%), and long-term mechanical stability (500 cycles at 30% strain). The concept is further demonstrated with a soft strain sensor based on a multi-nozzle EHD-printed circuit, employed for monitoring the human motion (finger bending), indicating the potential applications of these circuits in soft wearable electronic devices.
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 04-2018
Publisher: IEEE
Date: 11-2009
Publisher: IEEE
Date: 2016
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2021
Publisher: Elsevier BV
Date: 05-2005
Publisher: IEEE
Date: 07-2009
Publisher: IEEE
Date: 05-2012
Publisher: IEEE
Date: 05-2012
Publisher: IEEE
Date: 2005
Publisher: IEEE
Date: 06-2014
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2019
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 15-04-2017
Publisher: IEEE
Date: 12-2008
Publisher: IEEE
Date: 12-2018
Publisher: Springer Science and Business Media LLC
Date: 18-06-2019
Publisher: IEEE
Date: 08-2010
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 07-2021
Publisher: IEEE
Date: 08-2010
Publisher: IEEE
Date: 2008
Publisher: Photonics Society of Poland
Date: 31-03-2011
Publisher: IEEE
Date: 07-2009
Publisher: IEEE
Date: 2008
Publisher: IEEE
Date: 05-2012
Publisher: IEEE
Date: 2008
Publisher: IEEE
Date: 2008
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 07-04-2023
DOI: 10.36227/TECHRXIV.22293442
Abstract: Data generated from sources such as wearable sensors, medical imaging, personal health records, pathology records, and public health organizations have resulted in a massive information increase in the medical sciences over the last decade. Advances in computational hardware, such as cloud computing, Graphical Processing Units (GPUs), and Tensor Processing Units (TPUs), provide the means to utilize these data. Consequently, many Artificial Intelligence (AI)-based methods have been developed to infer from large healthcare data. Here, we present an overview of recent progress in artificial intelligence and biosensors in medical and life sciences. We discuss the role of machine learning in medical imaging, precision medicine, and biosensors for the Internet of Things (IoT). We review the most recent advancements in wearable biosensing technologies that use AI to assist in monitoring bodily electro-physiological and electro-chemical signals and disease diagnosis, demonstrating the trend towards personalized medicine with highly effective, inexpensive, and precise point-of-care treatment. Furthermore, an overview of the advances in computing technologies, such as accelerated artificial intelligence, edge computing, and federated learning for medical data, are also documented. Finally, we investigate challenges in data-driven AI approaches, the potential issues that biosensors and IoT-based healthcare generate, and the distribution shifts that occur among different data modalities, concluding with an overview of future prospects
Publisher: Nanyang Technol. Univ
Date: 2002
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 04-2006
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 12-2022
Publisher: SPIE
Date: 21-11-2001
DOI: 10.1117/12.449166
Publisher: Elsevier BV
Date: 05-2022
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 03-2015
Publisher: IEEE
Date: 08-2011
Publisher: IEEE
Date: 11-2009
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2023
Publisher: MDPI AG
Date: 08-03-2019
DOI: 10.3390/S19051197
Abstract: A self-powered device for human activity monitoring and energy harvesting for Internet of Things (IoT) devices is proposed. The self-powered device utilizes flexible Nano-generators (NGs), flexible diodes and off-the-shelf capacitors. During footsteps the NGs generate an AC voltage then it is converted into DC using rectifiers and the DC power is stored in a capacitor for powering the IoT devices. Polydimethylsiloxane (PDMS) and zinc stannate (ZnSnO3) composite is utilized for the NG active layer, indium tin oxide (ITO) and aluminum (Al) are used as the bottom and top electrodes, respectively. Four diodes are fabricated on the bottom electrode of the NG and connected in bridge rectifier configuration. A generated voltage of 18 Vpeak was achieved with a human footstep. The self-powered smart device also showed excellent robustness and stable energy scavenger from human footsteps. As an application we demonstrate human activity detection and energy harvesting for IoT devices.
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 12-2018
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 11-2014
Publisher: IEEE
Date: 05-2010
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 03-2007
Publisher: Tsinghua University Press
Date: 10-2009
Publisher: Elsevier BV
Date: 08-2017
Publisher: IEEE
Date: 05-2009
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2021
Publisher: IEEE
Date: 11-2015
Publisher: IEEE
Date: 05-2016
Publisher: IEEE
Date: 2009
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 15-01-2017
Publisher: IEEE
Date: 10-2007
Publisher: IEEE
Date: 07-2016
Publisher: IEEE
Date: 07-2009
Publisher: IEEE
Date: 07-2009
Publisher: IEEE
Date: 12-2015
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2021
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 06-2021
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 11-2015
Publisher: IEEE
Date: 12-2013
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 08-2018
Publisher: Springer Science and Business Media LLC
Date: 30-03-2017
Publisher: IEEE
Date: 08-2010
Publisher: Springer Berlin Heidelberg
Date: 2012
Publisher: IEEE
Date: 2004
Publisher: Springer Science and Business Media LLC
Date: 15-05-2008
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2018
Publisher: ACTA Press
Date: 2004
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 10-2006
Publisher: Informa UK Limited
Date: 27-06-2022
Publisher: Elsevier BV
Date: 06-2023
Publisher: IEEE
Date: 12-2011
Publisher: IEEE
Date: 12-2012
Publisher: IEEE
Date: 12-2007
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2016
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 12-2005
Publisher: IEEE
Date: 10-2007
Publisher: Elsevier BV
Date: 2012
Publisher: Presses Polytech. Univ. Romandes
Date: 2000
Publisher: IEEE
Date: 11-2010
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 15-12-2019
Publisher: IEEE
Date: 04-12-2022
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 08-2013
Publisher: IEEE
Date: 06-2019
Publisher: IEEE
Date: 12-2014
Publisher: MDPI AG
Date: 19-11-2021
DOI: 10.3390/ELECTRONICS10222856
Abstract: This paper presents a 10 bit 100 MS/s asynchronous successive approximation register (SAR) analog-to-digital converter (ADC) without calibration for industrial control system (ICS) applications. Several techniques are adopted in the proposed switching procedure to achieve better linearity, power and area efficiency. A single-side-fixed technique is utilized to reduce the number of capacitors a parallel split capacitor array in combination with a partially thermometer coded technique can minimize the switching energy, improve speed, and decrease differential non-linearity (DNL). In addition, a compact timing-protection scheme is proposed to ensure the stability of the asynchronous SAR ADC. The proposed ADC is fabricated in a 28 nm CMOS process with an active area of 0.026 mm2. At 100 MS/s, the ADC achieves a signal-to-noise-and-distortion ratio (SNDR) of 51.54 dB and a spurious free dynamic range (SFDR) of 55.12 dB with the Nyquist input. The measured DNL and integral non-linearity (INL) without calibration are +0.37/−0.44 and +0.48/−0.63 LSB, respectively. The power consumption is 1.1 mW with a supply voltage of 0.9 V, leading to a figure of merit (FoM) of 35.6 fJ/conversion-step.
Publisher: IEEE
Date: 06-2019
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 10-2020
Publisher: IEEE
Date: 26-11-2022
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 07-2016
Publisher: IEEE
Date: 2010
Publisher: American Scientific Publishers
Date: 04-2013
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 12-2005
Publisher: MDPI AG
Date: 04-06-2019
DOI: 10.3390/JSAN8020033
Abstract: The use of Internet of Things (IoT) with medical devices within a connected health environment promotes the quick flow of information and enables easy access to it [...]
Publisher: SPIE
Date: 30-05-2000
DOI: 10.1117/12.386565
Publisher: IEEE
Date: 05-2015
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2007
Publisher: IEEE
Date: 05-2016
DOI: 10.1109/FCCM.2016.60
Publisher: IEEE
Date: 2007
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 15-05-2022
Publisher: IEEE
Date: 05-2012
Publisher: IEEE
Date: 2014
Publisher: Optica Publishing Group
Date: 03-08-2010
DOI: 10.1364/OE.18.017776
Publisher: IEEE
Date: 2000
Publisher: IEEE
Date: 2010
Publisher: IEEE
Date: 2005
Publisher: IEEE
Date: 2005
Publisher: SPIE
Date: 30-05-2000
DOI: 10.1117/12.386692
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 03-2021
Publisher: IEEE
Date: 2006
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 12-2020
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 04-2008
Publisher: Elsevier BV
Date: 2007
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 07-2004
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 10-2017
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 11-2019
Publisher: Elsevier BV
Date: 10-2021
Publisher: Elsevier BV
Date: 11-2021
Publisher: IEEE
Date: 08-2008
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 11-2007
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 10-2013
Publisher: IEEE
Date: 11-2008
Publisher: Institution of Engineering and Technology (IET)
Date: 1997
Publisher: IEEE
Date: 05-2018
Publisher: IEEE
Date: 09-2019
Publisher: IEEE
Date: 2001
Publisher: IEEE
Date: 05-2016
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2018
Publisher: MDPI AG
Date: 07-02-2023
DOI: 10.3390/S23041869
Abstract: The human body’s temperature is one of the most important vital markers due to its ability to detect various diseases early. Accurate measurement of this parameter has received considerable interest in the healthcare sector. We present a novel study on the optimization of a temperature sensor based on silver interdigitated electrodes (IDEs) and carbon-sensing film. The sensor was developed on a flexible Kapton thin film first by inkjet printing the silver IDEs, followed by screen printing a sensing film made of carbon black. The IDE finger spacing and width of the carbon film were both optimized, which considerably improved the sensor’s sensitivity throughout a wide temperature range that fully covers the temperature of human skin. The optimized sensor demonstrated an acceptable temperature coefficient of resistance (TCR) of 3.93 × 10−3 °C−1 for temperature sensing between 25 °C and 50 °C. The proposed sensor was tested on the human body to measure the temperature of various body parts, such as the forehead, neck, and palm. The sensor showed a consistent and reproducible temperature reading with a quick response and recovery time, exhibiting adequate capability to sense skin temperatures. This wearable sensor has the potential to be employed in a variety of applications, such as soft robotics, epidermal electronics, and soft human–machine interfaces.
Publisher: Elsevier BV
Date: 09-2015
Publisher: IEEE
Date: 2010
Publisher: AIP Publishing
Date: 15-03-2021
DOI: 10.1063/5.0040244
Abstract: In this paper, we report on the observation of nonlinear effects in a nanostrip phononic metasurface (NPM) that enable the tuning of resonance frequencies at 1.42 GHz. The NPM resonator made of a periodic nanostrip array is fabricated on a lithium niobate substrate. Each of the nanostrips is 250 nm wide and is made of a 680-nm-thick SiO2 layer stacking on 50-nm Al metal electrodes. Finite element analysis reveals that the device operates in a vertically polarized (compression) mode with substantial acoustic energy confined in the nanostrips, leading to a local resonance at low acoustic velocity. Due to the nonlinearity, the resonance frequency of the device decreases with the increase in stimulation power. The underlying mechanism of the nonlinearity is found to be the power-dependent coupling of the adjacent nanostrips. This coupling induces softening of the substrate surface region, which reduces the acoustic velocity and, hence, the bulk radiation. As a result, the quality factor of the NPM resonator is found to improve with the increase in stimulation power. The power-dependent coupling of nanostrips in the NPM resonator demonstrates a reliable method for the realization of nonlinearity in phononic metasurfaces, which would significantly enrich the mechanisms for the manipulation of surface acoustic waves at high frequencies.
Publisher: IEEE
Date: 2005
Publisher: IEEE
Date: 04-2018
Publisher: IEEE
Date: 09-2006
Publisher: IEEE
Date: 2010
Publisher: IEEE
Date: 07-2019
Publisher: American Chemical Society (ACS)
Date: 04-09-2013
DOI: 10.1021/NN4040074
Abstract: Much greater surface-to-volume ratio of hierarchical nanostructures renders them with promising potential for high performance chemical sensing. In this work, crystalline nanocombs were synthesized via chemical vapor deposition and fabricated into resistive gas sensors. Particularly, NO2 sensing performance of these devices has been systematically characterized, showing higher sensitivity as compared to their nanobelt counterparts. Through device simulation, it was discovered that the teeth part of a nanocomb could serve as a "negative-potential gate" after accumulating electrons captured by surface adsorbed NO2 molecules. This self-gating effect eventually results in a greater reduction of nanocomb device channel conductance upon NO2 exposure, as compared to a nanobelt device, leading to a much higher NO2 detection sensitivity. This study not only sheds light on the mechanism of performance enhancement with hierarchical nanostructures, but also proposes a rational approach and a simulation platform to design nanostructure based chemical sensors with desirable performance.
Publisher: IEEE
Date: 04-12-2022
Publisher: IEEE
Date: 09-2010
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 10-2020
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2016
Publisher: IEEE
Date: 11-2008
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 04-2014
Publisher: MDPI AG
Date: 11-03-2019
DOI: 10.3390/S19051230
Abstract: Wearable biosensors attract significant interest for their capabilities in real-time monitoring of wearers’ health status, as well as the surrounding environment. Sensor patches are embedded onto the human epidermis accompanied by data readout and signal conditioning circuits with wireless communication modules for transmitting data to the computing devices. Wearable sensors designed for recognition of various biomarkers in human epidermis fluids, such as glucose, lactate, pH, cholesterol, etc., as well as physiological indicators, i.e., pulse rate, temperature, breath rate, respiration, alcohol, activity monitoring, etc., have potential applications both in medical diagnostics and fitness monitoring. The rapid developments in solution-based nanomaterials offered a promising perspective to the field of wearable sensors by enabling their cost-efficient manufacturing through printing on a wide range of flexible polymeric substrates. This review highlights the latest key developments made in the field of wearable sensors involving advanced nanomaterials, manufacturing processes, substrates, sensor type, sensing mechanism, and readout circuits, and ends with challenges in the future scope of the field. Sensors are categorized as biological and fluidic, mounted directly on the human body, or physiological, integrated onto wearable substrates/gadgets separately for monitoring of human-body-related analytes, as well as external stimuli. Special focus is given to printable materials and sensors, which are key enablers for wearable electronics.
Publisher: IEEE
Date: 08-2018
Publisher: IEEE
Date: 10-2009
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 09-2017
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2011
Publisher: IEEE
Date: 2005
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2008
Publisher: IEEE
Date: 2005
Publisher: IEEE
Date: 12-2006
Publisher: IEEE
Date: 05-2011
Publisher: IEEE
Date: 12-2014
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2021
Publisher: IEEE
Date: 12-2013
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 15-02-2021
Publisher: IEEE
Date: 2005
Publisher: Elsevier BV
Date: 2015
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 04-2022
Publisher: IEEE
Date: 2001
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2020
Publisher: IEEE
Date: 07-2012
Publisher: IEEE
Date: 05-2007
Publisher: IEEE
Date: 1999
Publisher: IEEE
Date: 2008
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 04-2023
Publisher: IEEE
Date: 06-2019
Publisher: IEEE
Date: 09-2011
Publisher: The Optical Society
Date: 28-03-2014
DOI: 10.1364/OE.22.008024
Publisher: IEEE
Date: 2003
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 09-2003
Publisher: Hindawi Limited
Date: 2014
DOI: 10.1155/2014/861278
Abstract: Conventional two-step ADC for CMOS image sensor requires full resolution noise performance in the first stage single slope ADC, leading to high power consumption and large chip area. This paper presents an 11-bit two-step single slope/successive approximation register (SAR) ADC scheme for CMOS image sensor applications. The first stage single slope ADC generates a 3-bit data and 1 redundant bit. The redundant bit is combined with the following 8-bit SAR ADC output code using a proposed error correction algorithm. Instead of requiring full resolution noise performance, the first stage single slope circuit of the proposed ADC can tolerate up to 3.125% quantization noise. With the proposed error correction mechanism, the power consumption and chip area of the single slope ADC are significantly reduced. The prototype ADC is fabricated using 0.18 μ m CMOS technology. The chip area of the proposed ADC is 7 μ m × 500 μ m. The measurement results show that the energy efficiency figure-of-merit (FOM) of the proposed ADC core is only 125 pJ/s le under 1.4 V power supply and the chip area efficiency is 84 k μ m 2 ·cycles/s le.
Publisher: MDPI AG
Date: 26-07-2021
DOI: 10.3390/ELECTRONICS10151791
Abstract: Ripple-carry adder (RCA) is among the most common type of adder. However, it is not preferred in many applications because of its high latency. In this paper, two architectures of high-speed parallel RCA (PRCA) along with fault detection and localization are proposed, with reduced overhead as compared with carry look-ahead adder (CLA). In the proposed approach, RCA is ided into blocks, where the initial carry input for each block will be generated by a carry look-ahead logic unit. The delay is reduced by 43.81% as compared with the conventional 64-bit RCA design. The delay is further reduced by replacing the last blocks with a single RCA-based CSeA design and becomes equal to CLA if the last three blocks are replaced with CSeA. The proposed 64-bit design of PRCA and PRCA-CSeA requires 20.31% and 22.50% area overhead as compared with the conventional RCA design. Whereas, the delay-power-area product of our proposed designs is 24.66%, and 30.94% more efficient than conventional RCA designs. With self-checking, the proposed architecture of PRCA and PRCA-CSeA with multiple-fault detection requires 42.36% and 44.35% area overhead as compared with a 64-bit self-checking RCA design.
Publisher: IEEE
Date: 05-2018
Publisher: IEEE
Date: 05-2017
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2020
Publisher: Hindawi Limited
Date: 2010
DOI: 10.1155/2010/920693
Abstract: Demand for high-resolution, low-power sensing devices with integrated image processing capabilities, especially compression capability, is increasing. CMOS technology enables the integration of image sensing and image processing, making it possible to improve the overall system performance. This paper reviews the current state of the art in CMOS image sensors featuring on-chip image compression. Firstly, typical sensing systems consisting of separate image-capturing unit and image-compression processing unit are reviewed, followed by systems that integrate focal-plane compression. The paper also provides a thorough review of a new design paradigm, in which image compression is performed during the image-capture phase prior to storage, referred to as compressive acquisition. High-performance sensor systems reported in recent years are also introduced. Performance analysis and comparison of the reported designs using different design paradigm are presented at the end.
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 10-2021
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 07-2011
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 04-2011
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 02-2011
Publisher: OSA
Date: 2018
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 08-2008
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 03-2010
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 09-2018
Publisher: IEEE
Date: 12-2006
Publisher: MDPI AG
Date: 28-08-2022
DOI: 10.3390/MI13091419
Abstract: EHD printing is an advanced deposition technology that is commonly utilized for the direct manufacture of electrical devices. In this study, meander-type resistive electrodes consisting of silver nanoparticles were printed directly on rigid glass and flexible polyethylene terephthalate (PET) substrates. High-resolution patterns of ≈50 µm linewidth were successfully printed on untreated surfaces utilizing a bigger nozzle of 100 µm inner diameter after improving the experimental settings. The manufactured electrodes were evaluated and used as Resistance Temperature Detectors (RTDs) and micro-heaters in a systematic manner. The temperature sensors performed well, with a Temperature Coefficient of Resistivity (TCRs) of 11.5 ×10−3/°C and 13.3 ×10−3/°C, for glass and PET substrates, respectively, throughout a wide temperature range of 100 °C and 90 °C. Furthermore, the RTDs had a quick response and recovery time, as well as minimal hysteresis. The electrodes’ measured sensitivities as micro-heaters were 3.3 °C/V for glass and 6.8 °C/V for PET substrates, respectively. The RTDs were utilized for signal conditioning in a Wheatstone bridge circuit with a self-heating temperature of less than 1 °C as a practical demonstration. The micro-heaters have a lot of potential in the field of soft wearable electronics for biomedical applications, while the extremely sensitive RTDs have a lot of potential in industrial situations for temperature monitoring.
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 15-03-2021
Publisher: IEEE
Date: 02-2007
Publisher: MDPI AG
Date: 30-10-2019
DOI: 10.3390/S19214713
Abstract: This work presents a cost-effective shadow mask printing approach to fabricate flexible sensors. The liquid-state sensing material can be directly brushed on a flexible substrate through a shadow mask. The ink leakage issue which often occurs in printed electronics is addressed with a custom taping scheme. A simple thermal compression bonding approach is also proposed to package the functional area of the sensor. To verify the feasibility and robustness of the proposed fabrication approach, a prototyped strain gauge displacement sensor is fabricated using carbon ink as the sensing material and a flexible polyimide (PI) film as the substrate. Once the substrate is deformed, cracks in the solidified ink layer can cause an increased resistance in the conductive path, thus achieving function of stable displacement/strain sensing. As a demonstration for displacement sensing application, this sensor is evaluated by studying its real-time resistance response under both static and dynamic mechanical loading. The fabricated sensor shows a comparable performance (with a gauge factor of ~17.6) to those fabricated using costly lithography or inkjet printing schemes, while with a significantly lower production cost.
Publisher: IEEE
Date: 10-2009
Publisher: IEEE
Date: 02-2020
Publisher: American Chemical Society (ACS)
Date: 24-05-2018
Abstract: In this work, we present a high-performance smart electronic nose (E-nose) system consisting of a multiplexed tin oxide (SnO
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2023
Publisher: IEEE
Date: 09-2007
Publisher: IEEE
Date: 09-2007
Publisher: IEEE
Date: 11-2018
Publisher: SPIE
Date: 19-04-2013
DOI: 10.1117/12.2009427
Publisher: Elsevier BV
Date: 02-2017
Publisher: IEEE
Date: 07-2012
Publisher: Frontiers Media SA
Date: 2012
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 06-2021
Publisher: IEEE
Date: 05-2008
Publisher: IEEE
Date: 12-2011
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2020
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 10-2006
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 02-2011
Publisher: IEEE
Date: 06-2014
Publisher: Springer Science and Business Media LLC
Date: 18-01-2021
DOI: 10.1038/S41378-020-00236-9
Abstract: Acoustic wave resonators are promising candidates for gravimetric biosensing. However, they generally suffer from strong acoustic radiation in liquid, which limits their quality factor and increases their frequency noise. This article presents an acoustic radiation-free gravimetric biosensor based on a locally resonant surface phononic crystal (SPC) consisting of periodic high aspect ratio electrodes to address the above issue. The acoustic wave generated in the SPC is slower than the sound wave in water, hence it prevents acoustic propagation in the fluid and results in energy confinement near the electrode surface. This energy confinement results in a significant quality factor improvement and reduces frequency noise. The proposed SPC resonator is numerically studied by finite element analysis and experimentally implemented by an electroplating-based fabrication process. Experimental results show that the SPC resonator exhibits an in-liquid quality factor 15 times higher than a conventional Rayleigh wave resonator at a similar operating frequency. The proposed radiation suppression method using SPC can also be applied in other types of acoustic wave resonators. Thus, this method can serve as a general technique for boosting the in-liquid quality factor and sensing performance of many acoustic biosensors.
Publisher: IEEE
Date: 05-2017
Publisher: MDPI AG
Date: 09-03-2011
DOI: 10.3390/JLPEA1010045
Publisher: IEEE Comput. Soc
Date: 2003
Publisher: Elsevier BV
Date: 11-2004
Publisher: Elsevier BV
Date: 2022
Publisher: IEEE
Date: 08-2007
Publisher: IEEE
Date: 12-2006
Publisher: IEEE
Date: 11-2019
Publisher: IEEE
Date: 08-2017
Publisher: MDPI AG
Date: 23-08-2022
DOI: 10.3390/PR10091677
Abstract: This paper examines the simulation, design, and fabrication of a nano-particle silver microheater. COMSOL Multiphysics is used to simulate the microheater of an area of 720 × 720 μm2. Different stages of the microheater fabrication process are discussed. The size of the cartridge used is 10 pL and the nozzle diameter was 50 μm. The drop spacing was chosen to be 45 μm after testing several different values. Controlled printing of Ag ink was reached by setting the tickle control frequency to 8 kHz and cartridge print height to 0.4 mm. The nozzle temperature was set at ambient temperature. The inkjet printed microheater is of same area and track and gap widths of 110 μm. The measured resistance of the microheater, 119 Ω, is approximately equal to the simulated resistance of 100 Ω. It was observed that the temperature at the center of the heater reaches up to 250 °C.
Publisher: Elsevier BV
Date: 12-2002
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 04-2016
Publisher: Springer Science and Business Media LLC
Date: 09-11-2021
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 12-2010
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 04-2011
Publisher: IEEE
Date: 05-2018
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 04-2012
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 07-2016
Publisher: IEEE
Date: 05-2012
Publisher: IEEE
Date: 10-2016
Publisher: IEEE
Date: 10-2016
Publisher: IEEE
Date: 12-2022
Publisher: IEEE
Date: 20-02-2022
Publisher: IEEE
Date: 05-2010
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 08-2022
Publisher: IEEE
Date: 06-2018
Publisher: IEEE
Date: 2018
Publisher: SPIE
Date: 15-05-2001
DOI: 10.1117/12.426976
Publisher: IEEE
Date: 28-05-2022
Publisher: MDPI AG
Date: 24-08-2022
DOI: 10.3390/S22176348
Abstract: A wireless vision sensor network (WVSN) is built by using multiple image sensors connected wirelessly to a central server node performing video analysis, ultimately automating different tasks such as video surveillance. In such applications, a large deployment of sensors in the same way as Internet-of-Things (IoT) devices is required, leading to extreme requirements in terms of sensor cost, communication bandwidth and power consumption. To achieve the best possible trade-off, we propose in this paper a new concept that attempts to achieve image compression and early image recognition leading to lower bandwidth and smart image processing integrated at the sensing node. A WVSN implementation is proposed to save power consumption and bandwidth utilization by processing only part of the acquired image at the sensor node. A convolutional neural network is deployed at the central server node for the purpose of progressive image recognition. The proposed implementation is capable of achieving an average recognition accuracy of 88% with an average confidence probability of 83% for five subimages, while minimizing the overall power consumption at the sensor node as well as the bandwidth utilization between the sensor node and the central server node by 43% and 86%, respectively, compared to the traditional sensor node.
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2022
Publisher: IEEE
Date: 07-2011
Publisher: SPIE
Date: 26-04-2012
DOI: 10.1117/12.914546
Publisher: IEEE
Date: 06-2008
DOI: 10.1109/RSP.2008.34
Publisher: IEEE
Date: 07-2011
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 15-03-2018
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 05-2014
Publisher: IEEE
Date: 05-2017
Publisher: MDPI AG
Date: 28-03-2011
DOI: 10.3390/JLPEA1010077
Publisher: IEEE
Date: 10-2011
Publisher: IEEE
Date: 12-2006
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 08-2018
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 06-2022
Publisher: IEEE
Date: 2005
Publisher: IEEE
Date: 2008
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 06-2009
Publisher: MDPI AG
Date: 24-08-2022
DOI: 10.3390/S22176350
Abstract: Body hydration is considered one of the most important physiological parameters to measure and one of the most challenging. Current methods to assess hydration are invasive and require costly clinical settings. The bio-impedance analysis offers a noninvasive and inexpensive tool to assess hydration, and it can be designed to be used in wearable health devices. The use of wearable electronics in healthcare applications has received increased attention over the last decade. New, emerging medical devices feature continuous patient monitoring and data collection to provide suitable treatment and preventive actions. In this paper, a model of human skin is developed and simulated to be used as a guide to designing a dehydration monitoring system based on a bio-impedance analysis technique. The study investigates the effect of applying different frequencies on the dielectric parameters of the skin and the resulting measured impedance. Two different interdigitated electrode designs are presented, and a comparison of the measurements is presented. The rectangular IDE is printed and tested on subjects to validate the bio-impedance method and study the interpretation of its results. The proposed design offers a classification criterion that can be used to assess dehydration without the need for a complex mathematical model. Further clinical testing and data are needed to refine and finalize the criteria.
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 06-2018
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 12-2018
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 02-2019
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 08-2020
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 04-2022
Publisher: IEEE
Date: 08-2013
Publisher: IEEE
Date: 06-2018
Publisher: IEEE
Date: 26-05-2021
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 10-2021
Publisher: IEEE
Date: 26-05-2021
Publisher: IEEE
Date: 26-05-2021
Publisher: IEEE
Date: 26-05-2021
Publisher: Elsevier BV
Date: 2023
DOI: 10.2139/SSRN.4352020
Publisher: IEEE
Date: 06-2017
Publisher: IEEE
Date: 05-2010
Publisher: IEEE
Date: 11-2018
Publisher: Springer Berlin Heidelberg
Date: 2009
Publisher: IEEE
Date: 07-2017
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 10-2022
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2006
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 09-2006
Publisher: IEEE
Date: 05-2008
Publisher: IEEE
Date: 12-2007
Publisher: IEEE
Date: 05-2021
Publisher: IEEE
Date: 26-05-2021
Publisher: Wiley
Date: 13-05-2021
Abstract: To mitigate future global energy challenges, it is vital to utilize natural resources to harness sustainable and environmentally‐friendly energy. This paper explores the tribo‐ and piezo‐electric functionalities of tomato peel (TP) to fabricate a nature‐driven hybrid nanogenerator. Tomato is one of the most cultivated vegetables globally, however, a significant amount of TP is disposed after utilization in the food processing industries. The TP possesses a natural hierarchically placed highly porous structure, which is helpful to enhance the output performance of both piezo‐ and tribo‐electric devices. This work shows that a TP based piezo‐electric nanogenerator can produce an open circuit voltage of 24.5 V, short circuit current of 2.5 µA, and maximum instantaneous power of 19.5 µW. In addition, the TP based tribo‐electric nanogenerator generates open circuit voltage, short circuit current, and instantaneous power of 135 V, 81 µA, and 3750 µW, respectively. Combining two NGs functionalities, the proposed TP based tribo‐ and piezo‐electric nanogenerator (TP‐TPENG) shows enhanced output performance with the rectified open circuit voltage, short circuit current, and maximum instantaneous power of 150 V, 84 µA, and 5400 µW, respectively. These results show that the TP‐TPENG can offer a new pathway toward bio‐based nanogeneration and self‐powered sensing green technologies.
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 09-2019
Publisher: Wiley
Date: 17-01-2023
Abstract: Phononic crystals (PnCs) exhibit acoustic properties that are not usually found in natural materials, which leads to the possibility of new devices for the complex manipulation of acoustic waves. In this article, a micron‐scale phononic waveguide constructed by line defects in PnCs to achieve on‐chip, tightly confined guiding, bending, and splitting of surface acoustic waves (SAWs) is reported. The PnC is made of a square lattice of periodic nickel pillars on a piezoelectric substrate. The PnC lattice constant, pillar diameter, and pillar height are set to 10, 7.5, and 3.2 µm, respectively, leading to a complete bandgap centered at 195 MHz. Interdigitated transducers are monolithically integrated on the same substrate for SAW excitation. The guiding, bending, and splitting of SAWs in the phononic waveguide are experimentally observed through measurement of the out‐of‐plane displacement fields using a scanning optical interferometer. The combination of destructive interference due to the Bragg bandgap and the interaction of the propagating wave with the pillars around the channel results in a tight confinement of the displacement field. The proposed phononic waveguides demonstrate the feasibility of precise local manipulation of SAW that is essential for emerging frontier applications, notably for phonon‐based classical and quantum information processing.
Publisher: IEEE
Date: 12-2022
Publisher: IEEE Comput. Soc
Date: 1999
Publisher: IEEE
Date: 05-2007
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 10-2010
Publisher: Elsevier BV
Date: 07-2015
DOI: 10.1016/J.RADONC.2015.04.018
Abstract: The absolute number of new cancer patients that will require at least one course of radiotherapy in each country of Europe was estimated. The incidence and relative frequency of cancer types from the year 2012 European Cancer Observatory estimates were used in combination with the population-based stage at diagnosis from five cancer registries. These data were applied to the decision trees of the evidence-based indications to calculate the Optimal Utilization Proportion (OUP) by tumour site. In the minimum scenario, the OUP ranged from 47.0% in the Russian Federation to 53.2% in Belgium with no clear geographical pattern of the variability among countries. The impact of stage at diagnosis on the OUP by country was rather limited. Within the 24 countries where data on actual use of radiotherapy were available, a gap between optimal and actual use has been observed in most of the countries. The actual utilization of radiotherapy is significantly lower than the optimal use predicted from the evidence based estimates in the literature. This discrepancy poses a major challenge for policy makers when planning the resources at the national level to improve the provision in European countries.
Publisher: SPIE
Date: 14-05-2018
DOI: 10.1117/12.2304566
Publisher: IEEE
Date: 03-2017
Publisher: IEEE
Date: 03-2017
Publisher: IEEE
Date: 06-2014
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 15-02-2019
Publisher: IEEE
Date: 10-07-2022
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 07-2015
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 07-2015
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2022
Publisher: IEEE
Date: 08-2008
Publisher: Elsevier BV
Date: 2019
Publisher: Hindawi Limited
Date: 2014
DOI: 10.1155/2014/208540
Abstract: This paper presents a column-parallel continuous-time sigma delta (CTSD) ADC for mega-pixel resolution CMOS image sensor (CIS). The sigma delta modulator is implemented with a 2nd order resistor/capacitor-based loop filter. The first integrator uses a conventional operational transconductance lifier (OTA), for the concern of a high power noise rejection. The second integrator is realized with a single-ended inverter-based lifier, instead of a standard OTA. As a result, the power consumption is reduced, without sacrificing the noise performance. Moreover, the variable gain lifier in the traditional column-parallel read-out circuit is merged into the front-end of the CTSD modulator. By programming the input resistance, the litude range of the input current can be tuned with 8 scales, which is equivalent to a traditional 2-bit pre lification function without consuming extra power and chip area. The test chip prototype is fabricated using 0.18 μ m CMOS process and the measurement result shows an ADC power consumption lower than 63.5 μ W under 1.4 V power supply and 50 MHz clock frequency.
Publisher: IEEE
Date: 2017
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 02-2021
Publisher: IEEE
Date: 09-2007
Publisher: IEEE
Date: 10-2017
Publisher: IEEE
Date: 11-2005
Publisher: IEEE
Date: 06-2015
Publisher: IEEE
Date: 10-2016
Publisher: IEEE
Date: 26-05-2021
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 02-2016
Publisher: IEEE
Date: 05-2010
Publisher: IEEE
Date: 12-2016
Publisher: IEEE
Date: 12-2007
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2016
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 07-2018
Publisher: IEEE
Date: 05-2015
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 12-2007
Publisher: IEEE
Date: 06-2018
Publisher: IEEE
Date: 08-2019
Publisher: IEEE
Date: 05-2021
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 02-2019
Publisher: IEEE
Date: 2005
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2020
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2019
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 12-2009
Publisher: IEEE
Date: 08-2016
Publisher: IEEE
Date: 11-2014
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2018
Publisher: IEEE
Date: 09-2007
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 12-2018
Publisher: Nanyang Technol. Univ
Date: 2002
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 02-2022
Publisher: IEEE
Date: 05-2009
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2020
Publisher: IEEE
Date: 2005
Publisher: Elsevier BV
Date: 11-2022
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 04-2020
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 15-02-2021
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 02-2004
Publisher: Springer New York
Date: 2022
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 02-2013
Publisher: Elsevier BV
Date: 03-2020
Publisher: IEEE
Date: 03-2009
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 15-09-2018
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2014
Publisher: IEEE
Date: 10-2016
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2023
Publisher: IEEE
Date: 05-2010
Publisher: IEEE
Date: 04-2013
Publisher: IEEE
Date: 11-2019
Publisher: Copernicus GmbH
Date: 26-05-2008
Abstract: Abstract. Binary multiplication continues to be one of the essential arithmetic operations in digital circuits. Even though field-programmable gate arrays (FPGAs) are becoming more and more powerful these days, the vendors cannot avoid implementing multiplications with high word-lengths using embedded blocks instead of configurable logic. But on the other hand, the circuit's efficiency decreases if the provided word-length of the hard-wired multipliers exceeds the precision requirements of the algorithm mapped into the FPGA. Thus it is beneficial to use multiplier blocks with configurable word-length, optimized for area, speed and power dissipation, e.g. regarding digital signal processing (DSP) applications. In this contribution, we present different approaches and structures for the realization of a multiplication with variable precision and perform an objective comparison. This includes one approach based on a modified Baugh and Wooley algorithm and three structures using Booth's arithmetic operand recoding with different array structures. All modules have the option to compute signed two's complement fix-point numbers either as an in idual computing unit or interconnected to a superior array. Therefore, a high throughput at low precision through parallelism, or a high precision through concatenation can be achieved.
Publisher: Springer International Publishing
Date: 23-08-2017
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 06-2006
Publisher: Wiley
Date: 06-05-2022
Abstract: Brain‐inspired computation is a promising field toward the next generation of intelligent computing systems. To mimic the brain functions, this field requires devices that can support the goal of computing efficiency, size, and cost. Therefore, researchers are trying to fabricate soft and flexible devices using synthetically organic and inorganic materials like solid‐state or ionic liquids. Herein, a soft and flexible bioinspired neuromorphic computing device based on organic silk fibroin gel, which is robust under external forces, is proposed. Silk fibroin protein is composed of essential and nonessential amino acids. with special amount of positively charged glycine, alanine, which plays an essential role during ionic movement to perform neuromorphic computing. Detailed electrical characterization of the proposed (Cu/silk fibroin gel/Cu) discrete device confirms the synaptic behavior by applying different pulse litudes, pulse widths, and frequencies. In addition, the proposed device delivers stable performance during mechanical deformations. The analysis of the present results defines that the proposed device is a potential candidate for environmentally friendly wearable intelligent electronics.
Publisher: SPIE
Date: 30-03-2004
DOI: 10.1117/12.525558
Publisher: IEEE
Date: 26-05-2021
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 10-2016
Publisher: Elsevier BV
Date: 07-2015
DOI: 10.1016/J.RADONC.2015.04.021
Abstract: The impact of differences in the distribution of major cancer sites and stages at diagnosis among 4 European countries on the optimal utilization proportion (OUP) of patients who should receive external beam radiotherapy was assessed within the framework of the ESTRO-HERO project. Data from Australian Collaboration for Cancer Outcomes Research and Evaluation (CCORE) were used. Population based stages at diagnosis from the cancer registries of Belgium, Slovenia, the Greater Poland region of Poland, and The Netherlands were used to assess the OUP for each country. A sensitivity analysis was carried out. The overall OUP by country varied from the lowest of 48.3% in Australia to the highest of 53.4% in Poland among European countries the variation was limited to 3%. Cancer site specific OUPs showed differences according to the variability in stage at diagnosis across countries. The most important impact on the OUP by country was due to changes in relative frequency of tumours rather than stage at diagnosis. This methodology can be adapted using European data, thus facilitating the planning of resources required to cope with the demand for radiotherapy in Europe, taking into account the national variability in cancer incidence.
Publisher: IEEE
Date: 11-2010
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2019
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 08-2016
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 05-2019
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2022
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 11-2020
Publisher: IEEE
Date: 10-2008
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 09-2011
Publisher: Elsevier BV
Date: 09-2012
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 12-2010
Publisher: IEEE
Date: 26-05-2021
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 09-2011
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 09-2019
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2019
Publisher: IEEE
Date: 2008
Publisher: IEEE
Date: 06-2015
No related grants have been discovered for Amine Bermak.