ORCID Profile
0000-0002-5694-0136
Current Organisation
University of Adelaide
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
In Research Link Australia (RLA), "Research Topics" refer to ANZSRC FOR and SEO codes. These topics are either sourced from ANZSRC FOR and SEO codes listed in researchers' related grants or generated by a large language model (LLM) based on their publications.
Combustion And Fuel Engineering | Automotive Engineering
Publisher: Mark Allen Group
Date: 02-06-2015
DOI: 10.12968/JOWC.2015.24.6.276
Abstract: The optimal management of fingertip injuries is a much debated topic. Surgical and nonsurgical options, including treatment with dressings alone, have comparable results. IV3000 is a semi-occlusive dressing with a high reactive moisture vapour transmission rate (MVTR) compared to its alternatives. As the fingertip is crucial to hand function, determining the optimal dressing to treat these injuries is of clinical importance. The aim of this study is to collect preliminary data on the IV dressing when used to treat fingertip injuries. Patients were recruited from the department of orthopaedic surgery outpatient clinic. Inclusion criteria were a fingertip injury with skin loss and emergency department treatment consistent with the study protocol, including washing the fingertip, simple debridement as required, administration of antibiotics, tetanus prophylaxis, and fingertip dressed with the IV dressing. Fingertip injuries (15) from 13 male patients were identified. With the exception of one, all injuries were treated with the IV dressing and were included in the analysis. The treatment outcome of 13 injuries was rated as ‘satisfactory’ by the patients, while one was rated ‘indifferent’. The latter was on one of two patients with injuries to two digits. No patient reported their outcome as ‘unsatisfactory’. At the 18–24 months’ follow-up, seven of the 14 affected digits had some degree of hypersensitivity, eight regained normal pulp thicknesses, one had thickened padding, and five had reduced pulp volume. All but one patient reported some degree of numbness. Nail involvement was seen in 11 injuries, all of which continued to have some degree of nail deformity. The IV dressing provides satisfactory outcomes when used to treat fingertip injuries. As the dressing possesses properties that suggest it would result in a superior healing environment compared to other semi-occlusive dressings, a prospective, randomised control trial should be conducted to determine whether these properties translate into superior outcomes when used to treat fingertip injuries.
Publisher: Wiley
Date: 14-10-2013
DOI: 10.1111/ANS.12411
Abstract: Pyogenic liver abscess (PLA) is an uncommon but potentially life-threatening condition. Due to advances in diagnostic and treatment methods, the mortality rate has reduced in recent decades. The aim of this study was to gather recent data to examine PLA trends in South Australia. The medical records of all patients admitted to The Queen Elizabeth Hospital, South Australia, between November 2000 and November 2009 with a primary or secondary diagnosis of PLA were retrospectively reviewed. Thirty-six patients were identified. Twenty (55.6%) were male and 16 (44.4%) female. The mean patient age was 70.2 years. A single PLA was found in 21 (58.3%) patients and multiple abscesses in 15 (41.7%) patients. Segment 7 of the liver was most commonly affected (10 cases). In 12 patients, multiple organisms were identified. Escherichia coli, Klebsiella pneumonia and Streptococcus species were most commonly identified. All patients received antibiotics and 27 (75%) received additional treatment. Nine patients received open abscess drainage. Fourteen received ultrasound-guided or computed tomography-guided percutaneous drainage or aspiration. One patient died as a direct result of a PLA. Since its first description, the epidemiology of PLA has changed. Patients diagnosed with PLA are now older, the male predominance is less and the organism more likely to originate from the biliary tract. The approach to PLA has also progressed with more accurate imaging and better treatment methods becoming available, which has resulted in a low mortality rate. This series confirms the described trends in South Australia.
Publisher: Wiley
Date: 19-05-2022
DOI: 10.1111/ANS.17773
Abstract: Supracondylar fractures are the most common elbow fracture. There have been no studies published analysing flexion‐type fractures in the Australian paediatric population. This paper aims to investigate flexion‐type supracondylar fractures in an Australian paediatric population. Eight hundred and three paediatric supracondylar elbow fractures were retrospectively reviewed at one hospital over a 5 year time period. The focus was on flexion‐type fractures. Supracondylar fractures that presented to the Women's and Children's Hospital Emergency Department between 2015 and 2020 were retrospectively reviewed. Fractures were classified on plain radiographs according to the Modified Gartland Classification System. Injury and treatment data were collected for flexion‐type fractures. Twenty‐one (2.6%) of fractures were flexion‐type. The average age of injury was 6.8 years old. Flexion‐type fractures were more common in females (62%) and with high energy mechanisms (81%). Ulnar nerve palsies occurred in five cases (24%). Two ulna nerve palsies did completely resolve at 3 months follow up. One open fracture occurred. No vascular injuries occurred. Ten of the 21 flexion‐type fractures (48%) were treated surgically. The authors conclude that: flexion fractures are uncommon, they occur more often after high energy mechanisms such as falls from monkey bars, swings, or tr olines. Flexion‐type fractures occur more often in slightly older females. The ulnar nerve is most frequently injured and in the current study—exclusively injured. At 3 month follow up, spontaneous nerve recovery had occurred in three of the five cases (60%).
Publisher: SAGE Publications
Date: 18-08-2019
Abstract: The anterior and anterolateral approaches to the humerus describe splitting brachialis longitudinally, assuming its fibres run parallel to the shaft. Recent improvements in the understanding of brachialis anatomy however have demonstrated it has two distinct heads, with the bulk of its fibres running oblique relative to the humerus. Attempting to split brachialis longitudinally to the extent required for plate osteosynthesis invariably leads to transection of a significant number of muscle fibres. The authors present a less muscle destructive modification to the anterolateral approach (ALA) based on a bicipital brachialis muscle. In order to preserve brachialis muscle fibres, the modified ALA elevates the superficial head from the underlying humerus and longitudinally splits the deep head to allow a fixation device to be tunnelled. Case notes of patients with a humeral shaft fracture fixed via the modified ALA were retrospectively reviewed. Ninteen humeral shaft fractures were fixed via the modified ALA. No post-operative nerve palsies were reported. Of the 19 patients, 14 (73.7%) received clinical and radiological follow-up. All reported being satisfied with their outcome. One developed a superficial wound infection and one (previous diagnosis of spondyloepiphyseal dysplasia tarda) developed a non-union requiring revision surgery. Of the five patients lost to follow-up, two died, and three reported no ongoing orthopaedic issues via telephone. Improved anatomical understanding of brachialis has resulted in the described modification to the ALA which is less muscle destructive and follows a truer inter-nervous plane. This small series demonstrates satisfactory outcomes using this approach.
Publisher: Springer Science and Business Media LLC
Date: 26-09-2014
DOI: 10.1007/S00586-014-3589-Z
Abstract: This study investigated whether ultrasound (U/S) is an alternative to radiography when measuring magnetically controlled growth rod (MCGR) length in order to reduce radiation exposure. Distractible spinal growth rods are the gold standard when treating early-onset scoliosis (EOS). This was a prospective series. Patients were already undergoing EOS treatment using MCGRs. Forty-eight data points measured using radiography and U/S were compared. Each U/S data point was measured three times by three observers to assess intra- and inter-observer reliability. The radiation dose of the pre-lengthening and post-lengthening radiographs was recorded. The average rod lengths were 1.322 cm with U/S and 1.329 cm with radiography. The ICC (radiography vs. U/S) was 0.992 (95 % confidence interval (CI) 0.976, 1.000). The inter- and intra-rater reliability of U/S had an ICC of 0.987 (95 % CI 0.966, 1.000) and 0.983 (95 % CI 0.956, 1.000), respectively. The mean total effective radiation dose of the pre-lengthening and post-lengthening PA spinal radiographs was 0.26 mSv with a mean attributable lifetime cancer risk of one in 39,686 per lengthening. U/S highly agrees with radiography when measuring MCGR length. It has a high inter- and intra-observer reliability and does not require radiation exposure. Although U/S allows accurate MCGR measurement and soft tissue assessment, patients will still need occasional radiographs to assess spine bony elements, overall spinal balance and scoliosis correction. Combining radiography and U/S allows patient monitoring and accurate MCGR measurement whilst decreasing patients' radiation exposure.
Publisher: Elsevier BV
Date: 11-2023
Publisher: SAGE Publications
Date: 08-2013
Publisher: SAGE Publications
Date: 2022
DOI: 10.1177/10225536221088633
Abstract: Background: Inferior angle of scapula fractures (IAS) are rare injuries that result from the periscapular shoulder muscles avulsing the inferior scapula tip. The aim of this study was to investigate the mechanisms of injury, investigations and treatment outcomes, as currently only case reports are available to guide management. Methods: Computered tomography (CT) images were reviewed to identify patients with an IAS fracture. Case notes were reviewed, and patients contacted to gather data relating to the injury, treatment and outcome. Results: Fourteen fractures were identified on CT. Five were missed on the initial radiograph. High energy fractures had an average age of 47.6 years, 90% were male. Low energy fractures had a mean age of 83.6 years 75% were female. All undisplaced fractures had a satisfactory outcome treated non-operatively. Three of six displaced fractures reported an unsatisfactory outcome with non-operative treatment. Subsequent surgical fixation resulted in resolution of symptoms. Conclusions: Inferior angle of scapula fractures are a rare injury that can result from high or low energy trauma. They are easy to miss on plain radiographs. Identification is important as displaced fractures can do poorly when treated non-operatively, but symptoms resolve with surgical fixation. Undisplaced fracture has a satisfactory outcome when treated non-operatively. Evidence: Level IV.
Publisher: Ovid Technologies (Wolters Kluwer Health)
Date: 28-06-2022
DOI: 10.1097/CORR.0000000000002293
Abstract: Loss of glenoid fixation is a key factor affecting the survivorship of primary total shoulder arthroplasty (TSA). It is not known whether the lower revision rates associated with crosslinked polyethylene (XLPE) compared with those of non-XLPE identified in hip and knee arthroplasty apply to shoulder arthroplasty. We used data from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) to compare the revision rates of primary stemmed anatomic TSA using XLPE to procedures using non-XLPE. In patients receiving a primary stemmed anatomic TSA for osteoarthritis, we asked: (1) Does the rate of revision or reason for revision vary between XLPE and non-XLPE all-polyethylene glenoid components? (2) Is there any difference in the revision rate when XLPE is compared with non-XLPE across varying head sizes? (3) Is there any difference in survival among prosthesis combinations with all-polyethylene glenoid components when they are used with XLPE compared with non-XLPE? Data were extracted from the AOANJRR from April 16, 2004, to December 31, 2020. The AOANJRR collects data on more than 97% of joint replacements performed in Australia. The study population included all primary, stemmed, anatomic TSA procedures performed for osteoarthritis using all-polyethylene glenoid components. Procedures were grouped into XLPE and non-XLPE bearing surfaces for comparison. Of the 10,102 primary stemmed anatomic TSAs in the analysis, 39% (3942 of 10,102) used XLPE and 61% (6160 of 10,102) used non-XLPE. There were no differences in age, gender, or follow-up between groups. Revision rates were determined using Kaplan-Meier estimates of survivorship to describe the time to the first revision, with censoring at the time of death or closure of the database at the time of analysis. Revision was defined as removal, replacement, or addition of any component of a joint replacement. The unadjusted cumulative percent revision after the primary arthroplasty (with 95% confidence intervals [CIs]) was calculated and compared using Cox proportional hazard models adjusted for age, gender, fixation, and surgeon volume. Further analyses were performed stratifying according to humeral head size, and a prosthesis-specific analysis adjusted for age and gender was also performed. This analysis was restricted to prosthesis combinations that were used at least 150 times, accounted for at least four revisions, had XLPE and non-XLPE options available, and had a minimum of 3 years of follow-up. Non - XLPE had a higher risk of revision than XLPE after 1.5 years (HR 2.3 [95% CI 1.6 to 3.1] p 0.001). The cumulative percent revision at 12 years was 5% (95% CI 4% to 6%) for XLPE and 9% (95% CI 8% to 10%) for non-XLPE. There was no difference in the rate of revision for head sizes smaller than 44 mm. Non-XLPE had a higher rate of revision than XLPE for head sizes 44 to 50 mm after 2 years (HR 2.3 [95% CI 1.5 to 3.6] p 0.001) and for heads larger than 50 mm for the entire period (HR 2.2 [95% CI 1.4 to 3.6] p 0.001). Two prosthesis combinations fulfilled the inclusion criteria for the prosthesis-specific analysis. One had a higher risk of revision when used with non-XLPE compared with XLPE after 1.5 years (HR 3.7 [95% CI 2.2 to 6.3] p 0.001). For the second prosthesis combination, no difference was found in the rate of revision between the two groups. These AOANJRR data demonstrate that noncrosslinked, all-polyethylene glenoid components have a higher revision rate compared with crosslinked, all-polyethylene glenoid components when used in stemmed anatomic TSA for osteoarthritis. As polyethylene type is likely an important determinant of revision risk, crosslinked polyethylene should be used when available, particularly for head sizes larger than 44 mm. Further studies will need to be undertaken after larger numbers of shoulder arthroplasties have been performed to determine whether this reduction in revision risk associated with XLPE bears true for all TSA designs. Level III, therapeutic study.
Start Date: 2009
End Date: 12-2012
Amount: $360,000.00
Funder: Australian Research Council
View Funded Activity