ORCID Profile
0000-0002-5252-8865
Current Organisation
University of Tasmania
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Informa UK Limited
Date: 26-02-2020
Publisher: American Chemical Society (ACS)
Date: 19-01-2016
DOI: 10.1021/ACS.ANALCHEM.5B03181
Abstract: We describe a new process for preparing porous solid phase microextraction (SPME) coatings by the sputtering of silicon onto silica fibers. The microstructure of these coatings is a function of the substrate geometry and mean free path of the silicon atoms, and the coating thickness is controlled by the sputtering time. Sputtered silicon structures on silica fibers were treated with piranha solution (a mixture of concd H2SO4 and 30% H2O2) to increase the concentration of silanol groups on their surfaces, and the nanostructures were silanized with octadecyldimethylmethoxysilane in the gas phase. The attachment of this hydrophobic ligand was confirmed by X-ray photoelectron spectroscopy and contact angle goniometry on model, planar silicon substrates. Sputtered silicon coatings adhered strongly to their surfaces, as they were able to pass the Scotch tape adhesion test. The extraction time and temperature for headspace extraction of mixtures of alkanes and alcohols on the sputtered fibers were optimized (5 min and 40 °C), and the extraction performances of SPME fibers with 1.0 or 2.0 μm of sputtered silicon were compared to those from a commercial 7 μm poly(dimethylsiloxane) (PDMS) fiber. For mixtures of alcohols, aldehydes, amines, and esters, the 2.0 μm sputtered silicon fiber yielded signals that were 3-9, 3-5, 2.5-4.5, and 1.5-2 times higher, respectively, than those of the commercial fiber. For the heavier alkanes (undecane-hexadecane), the 2.0 μm sputtered fiber yielded signals that were approximately 1.0-1.5 times higher than the commercial fiber. The sputtered fibers extracted low molecular weight analytes that were not detectable with the commercial fiber. The selectivity of the sputtered fibers appears to favor analytes that have both a hydrophobic component and hydrogen-bonding capabilities. No detectable carryover between runs was noted for the sputtered fibers. The repeatability (RSD%) for a fiber (n = 3) was less than 10% for all analytes tested, and the between-fiber reproducibility (n = 3) was 0-15%, generally 5-10%, for all analytes tested. The repeatabilities of our sputtered fibers and the commercial 7 μm PDMS fiber are essentially the same. Fibers could be used for at least 300 extractions without loss of performance. More than 50 compounds were identified in a gas chromatography-mass spectrometry headspace analysis of a real world botanical s le with the 2.0 μm fiber.
Publisher: Elsevier BV
Date: 06-2013
DOI: 10.1016/J.ACA.2013.04.069
Abstract: The present research reports the use of a three-dimensional preparative gas chromatography (prep GC) system, equipped with three Deans-switch devices and 5%diphenyl/wax/mid-polarity ionic liquid stationary phases, for the isolation of volatile components from a complex natural source, namely w ee essential oil (derived from Clausena lansium Skeels leaves). Collection was performed by using a simple and effective lab-constructed trapping device. Initially, an unknown (and abundant) w ee oil constituent was erroneously identified as α-sinensal, through an MS database search (a low similarity match was attained), performed after a GC-quadMS experiment., The unknown compound was then the isolated by using the novel prep GC system, in a highly pure form (at the mg level), and was correctly identified by using nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR) and mass spectrometry (MS). Both FTIR and MS data were used to confirm the NMR information. The name given to the molecule was (2E,6E)-2-methyl-6-(4-methylcyclohex-3-enylidene)hept-2-enal. The results herein described will demonstrate the need for a high-resolution GC step, prior to analyte collection, in the prep GC analysis of complex s les.
Publisher: Elsevier BV
Date: 08-2011
Publisher: Elsevier BV
Date: 02-2014
DOI: 10.1016/J.FOODCHEM.2013.08.130
Abstract: In this work the characterisation of the lipid fraction of several species of marine macro algae gathered along the eastern coast of Sicily is reported. Two species of green marine algae (Chloropyceae), two species of red marine algae (Rhodophyceae) and four species of brown marine algae (Pheophyceae) were evaluated in terms of fatty acids, triacylglycerols, pigments and phospholipids profile. Advanced analytical techniques were employed to fully characterise the lipid profile of these Mediterranean seaweeds, such as GC-MS coupled to a novel mass spectra database supported by the simultaneous use of linear retention index (LRI) for the identification of fatty acid profile LC-MS was employed for the identification of triacylglycerols (TAGs), carotenoids and phospholipids the determination of accurate mass was carried out on carotenoids and phospholipids. Quantitative data are reported on fatty acids and triacylglycerols as relative percentage of total fraction.
Publisher: Elsevier BV
Date: 2011
DOI: 10.1016/J.CHROMA.2010.10.117
Abstract: The production and trade of Indian sandalwood oil is strictly regulated, due to the impoverishment of the plantations for such a reason, Australian sandalwood oil has been evaluated as a possible substitute of the Indian type. International directives report, for both the genuine essential oils, specific ranges for the sesquiterpene alcohols (santalols). In the present investigation, a multidimensional gas chromatographic system (MDGC), equipped with simultaneous flame ionization and mass spectrometric detection (FID/MS), has been successfully applied to the analysis of a series of sandalwood oils of different origin. A detailed description of the system utilized is reported. Three santalol isomers, (Z)-α-trans-bergamotol, (E,E)-farnesol, (Z)-nuciferol, epi-α-bisabolol and (Z)-lanceol have been quantified. LoD (MS) and LoQ (FID) values were determined for (E,E)-farnesol, used as representative of the oxygenated sesquiterpenic group, showing levels equal to 0.002% and 0.003%, respectively. A great advantage of the instrumental configuration herein discussed, is represented by the fact that identification and quantitation of target analytes are carried out in one step, without the need to perform two separate analyses.
Publisher: Elsevier BV
Date: 04-2013
DOI: 10.1016/J.ACA.2013.01.041
Abstract: Multiple headspace-solid phase microextraction (MHS-SPME) followed by gas chromatography/mass spectrometry (GC-MS) and flame ionization detection (GC-FID) was applied to the identification and quantification of volatiles released by the mushroom Agaricus bisporus, also known as ch ignon. MHS-SPME allows to perform quantitative analysis of volatiles from solid matrices, free of matrix interferences. S les analyzed were fresh mushrooms (chopped and homogenized) and mushroom-containing food dressings. 1-Octen-3-ol, 3-octanol, 3-octanone, 1-octen-3-one and benzaldehyde were common constituents of the s les analyzed. Method performance has been tested through the evaluation of limit of detection (LoD, range 0.033-0.078 ng), limit of quantification (LoQ, range 0.111-0.259 ng) and analyte recovery (92.3-108.5%). The results obtained showed quantitative differences among the s les, which can be attributed to critical factors, such as the degree of cell damage upon s le preparation, that are here discussed. Considerations on the mushrooms biochemistry and on the basic principles of MHS analysis are also presented.
Publisher: American Chemical Society (ACS)
Date: 18-12-2020
Abstract: This study assesses whether the distinct altitudinal cline in leaf morphology (decreased leaf width and length with increased altitude) in Tasmanian mountain pepper (
Publisher: Springer Science and Business Media LLC
Date: 12-11-2018
No related grants have been discovered for Laura Tedone.