ORCID Profile
0000-0002-5551-1321
Current Organisations
University of Nottingham
,
Keele University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Public Library of Science (PLoS)
Date: 28-07-2016
Publisher: Cold Spring Harbor Laboratory
Date: 21-05-2020
DOI: 10.1101/2020.05.20.106716
Abstract: Stochastic optical reconstruction microscopy (STORM) is one of the most commonly used super-resolution microscopy techniques. Popular implementations of STORM utilize aromatic fluorophores and consist of a number of intrinsic limitations such the finite photostability of the dyes, the reliance upon non-physiological redox buffers and speed which is ultimately limited by the ‘off’-rates of the photoblinking. Self-activated nanodiamond-based STORM (sandSTORM) has been developed as an accelerated STORM protocol which harvests the rapid, high quantum-yield and sustained photoblinking of nanodiamonds (ND). Photoluminescence emanating from the stochastic charge-state interconversion of Nitrogen Vacancy (NV) centers between NV0and NV - is localized using conventional STORM-optimized hardware and image processing protocols over an unlimited duration of imaging. This produces super-resolution images of matching resolution at ∼ 3-times the speed and ∼ 100 times less light exposure to the s le compared to traditional STORM. The enabling NDs have been used to map arrays of ryanodine receptor in skeletal muscle tissues via immunolabelling and directly visualize the internal spaces of living neurons via endocytosis of NDs. This paper details the physical basis of sandSTORM, factors which optimize its performance, and key characteristics which make it a powerful STORM protocol suitable for imaging nanoscale sub-cellular structures.
Publisher: SPIE
Date: 17-09-2014
DOI: 10.1117/12.2069138
Publisher: Wiley
Date: 07-2009
DOI: 10.1002/BTPR.191
Abstract: This article demonstrates the application of time-lapsed imaging and image processing to inform the supercritical processing of tissue scaffolds that are integral to many regenerative therapies. The methodology presented provides online quantitative evaluation of the complex process of scaffold formation in supercritical environments. The capabilities of the developed system are demonstrated through comparison of scaffolds formed from polymers with different molecular weight and with different venting times. Visual monitoring of scaffold fabrication enabled key events in the supercritical processing of the scaffolds to be identified including the onset of polymer plasticization, supercritical points and foam formation. Image processing of images acquired during the foaming process enabled quantitative tracking of the growing scaffold boundary that provided new insight into the nature of scaffold foaming. Further, this quantitative approach assisted in the comparison of different scaffold fabrication protocols. Observed differences in scaffold formation were found to persist, post-fabrication as evidenced by micro x-ray computed tomography (micro x-ray CT) images. It is concluded that time-lapsed imaging in combination with image processing is a convenient and powerful tool to provide insight into the scaffold fabrication process.
Publisher: Wiley
Date: 24-07-2003
DOI: 10.1118/1.1590751
Abstract: A novel imaging system for investigation of absorbed dose distributions in radiotherapy polymer gel dosimeters using ultrasound is introduced. A prototype transmission ultrasound computed tomography (UCT) imaging system is developed and evaluated. The imaging capabilities of the system are assessed through investigation of an irradiated polyacrylamide gel test phantom. Images based on transmitted signal litude and time of flight (TOF) of the ultrasonic signal through the phantom are reconstructed using a filtered backprojection technique. In general, the reconstruction of the square field in the TOF image was superior to the transmission image, however, transmission images displayed superior contrast to TOF images. The image quality achieved with this prototype system is promising and could be significantly enhanced through improvements, in particular through the development of more sophisticated experimental equipment. It is concluded that UCT is a viable technique for imaging absorbed dose distributions in polymer gel dosimeters and investigations are continuing to further improve the system.
Publisher: Elsevier BV
Date: 09-2009
DOI: 10.1016/J.BIOMATERIALS.2009.04.035
Abstract: In order to assess the suitability of polymer tissue scaffolds for use in regenerative medicine, methods to characterise scaffolds are needed. This requires the scaffold's structure to be determined for which X-ray microscopic computed tomography (X-ray micro CT) is widely used. However, because scaffolds are generally made of materials with low X-ray attenuating properties the images produced are far from ideal, which makes distinguishing scaffold material from the pores within it a non-trivial process. This paper presents a method for generating computer-simulated scaffolds that resemble the form of foamed polymer tissue scaffolds. Virtual images of the scaffold are then produced via a simulated X-ray micro CT process enabling the effect of varying the key parameters in the imaging process to be investigated. Here this is assessed via the calculated porosity of the s le, this being a simple measure of a scaffold's properties. Results highlight the difficulties in using X-ray micro CT to characterise scaffolds constructed from materials with low X-ray attenuating properties and suggest strategies that may be adopted in order to improve the quality of the images produced.
Publisher: Society of Rheology
Date: 2012
DOI: 10.1122/1.3670732
Publisher: Wiley
Date: 22-04-2019
Abstract: Fluorescent nanodiamonds (fNDs) containing nitrogen vacancy (NV) centers are promising candidates for quantum sensing in biological environments. This work describes the fabrication and implementation of electrospun poly lactic-co-glycolic acid (PLGA) nanofibers embedded with fNDs for optical quantum sensing in an environment, which recapitulates the nanoscale architecture and topography of the cell niche. A protocol that produces uniformly dispersed fNDs within electrospun nanofibers is demonstrated and the resulting fibers are characterized using fluorescent microscopy and scanning electron microscopy (SEM). Optically detected magnetic resonance (ODMR) and longitudinal spin relaxometry results for fNDs and embedded fNDs are compared. A new approach for fast detection of time varying magnetic fields external to the fND embedded nanofibers is demonstrated. ODMR spectra are successfully acquired from a culture of live differentiated neural stem cells functioning as a connected neural network grown on fND embedded nanofibers. This work advances the current state of the art in quantum sensing by providing a versatile sensing platform that can be tailored to produce physiological-like cell niches to replicate biologically relevant growth environments and fast measurement protocols for the detection of co-ordinated endogenous signals from clinically relevant populations of electrically active neuronal circuits.
Publisher: SPIE
Date: 09-02-2012
DOI: 10.1117/12.907457
Publisher: Future Medicine Ltd
Date: 03-2007
Abstract: Tissue engineering is a rapidly growing field that aims to develop biological substitutes that restore, maintain or improve tissue function. The focus of research to date has been the underlying biology required for tissue-engineered therapies. However, as tissue-engineered products reach the marketplace, there is a pressing need for an improved understanding of the engineering and economic issues associated with them. This is motivated by the lack of commercial viability of many of the initial therapies that have been produced. It has been suggested in the literature that this is partly due to poor process and system design in tissue production, as well as a lack of process monitoring and control. This review argues that principles of design, measurement and process monitoring from the physical sciences are needed to move tissue engineering forward, and that much of the technology needed to realize this is already available.
Publisher: IEEE
Date: 12-2011
Publisher: Wiley
Date: 24-11-2011
DOI: 10.1002/JBM.B.31957
Abstract: Although X-ray microscopic computed tomography is widely used to assess the structural properties of polymeric tissue scaffolds its validity is dependent on the quality of the images obtained. Here, the role of resolution, integration time, image averaging, and X-ray power on the accurate determination of scaffold porosity, while aiming to minimize imaging time, was investigated. This work identified key parameters for optimization and a methodology to vary them to improve results. Based on this, guidelines were developed to assist in the selection of image acquisition parameters to allow rapid and accurate scaffold imaging as required for mass manufacture.
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 09-2015
Publisher: Elsevier BV
Date: 2014
DOI: 10.1016/J.MSEC.2013.09.018
Abstract: Pluronic hydrogels composed of PEO-PPO-PEO tri-block copolymers have received a lot of attention for their applicability to drug delivery. These systems can be injected into the body in a liquid form and then, in response to temperature changes, self-assemble into nano-sized micelles which ultimately aggregate to form a gel. The phase behaviour and effectiveness of Pluronic hydrogels as drug carriers is affected by the local thermal and ionic environment which is likely to be different from patient to patient. There is a current need for in vivo techniques to study the phase behaviour of Pluronic hydrogels and this work demonstrates an ultrasound approach for the study of drug loaded Pluronic F127 hydrogels. Ultrasound velocity and attenuation were both found to change with temperature and through validation with fluorescence spectroscopy it was determined that the temperature dependent micellation transition in the Pluronic solutions could be identified through relative changes in ultrasound velocity and attenuation as a function of temperature. This phase transition was more clearly detected through examination of the first and second derivatives of both ultrasound parameters with respect to temperature. Further this work demonstrates for the first time to our knowledge ultrasound characterisation studies on drug loaded Pluronics.
Publisher: Future Medicine Ltd
Date: 09-2010
DOI: 10.2217/RME.10.32
Abstract: Hydrogels are playing an increasing role in regenerative medicine owing to their growing functional sophistication. This is being underpinned by advances in hydrogel synthesis, particularly through molecular and genetic engineering, which provide greater control of hydrogel structure and hence the emergence of hydrogels with new functionalities. In order to exploit this capability it is necessary to fully understand the relationship between hydrogel structure and function. This article will investigate the nature of hydrogel-structure relationships by: highlighting the key attributes of hydrogels that modulate their function, discussing the link between these attributes and hydrogel behavior, and identifying possible measurement strategies to elucidate them.
Publisher: IOP Publishing
Date: 16-09-2002
DOI: 10.1088/0031-9155/47/19/301
Abstract: Polymer gel dosimeters offer a wide range of potential applications in the three-dimensional verification of complex dose distribution such as in intensity-modulated radiotherapy (IMRT). Until now, however, polymer gel dosimeters have not been widely used in the clinic. One of the reasons is that they are difficult to manufacture. As the polymerization in polymer gels is inhibited by oxygen, all free oxygen has to be removed from the gels. For several years this was achieved by bubbling nitrogen through the gel solutions and by filling the phantoms in a glove box that is perfused with nitrogen. Recently another gel formulation was proposed in which oxygen is bound in a metallo-organic complex thus removing the problem of oxygen inhibition. The proposed gel consists of methacrylic acid, gelatin, ascorbic acid, hydroquinone and copper(II)sulphate and is given the acronym MAGIC gel dosimeter. These gels are fabricated under normal atmospheric conditions and are therefore called 'normoxic' gel dosimeters. In this study, a chemical analysis on the MAGIC gel was performed. The composition of the gel was varied and its radiation response was evaluated. The role of different chemicals and the reaction kinetics are discussed. It was found that ascorbic acid alone was able to bind the oxygen and can thus be used as an anti-oxidant in a polymer gel dosimeter. It was also found that the anti-oxidants N-acetyl-cysteine and tetrakis(hydroxymethyl)phosphonium were effective in scavenging the oxygen. However, the rate of oxygen scavenging is dependent on the anti-oxidant and its concentration with tetrakis(hydroxymethyl)phosphonium being the most reactive anti-oxidants. Potentiometric oxygen measurements in solution provide an easy way to get a first impression on the rate of oxygen scavenging. It is shown that cupper(II)sulphate operates as a catalyst in the oxidation of ascorbic acid. We, therefore, propose some new normoxic gel formulations that have a less complicated chemical formulation than the MAGIC gel.
Publisher: SPIE
Date: 10-02-2011
DOI: 10.1117/12.873365
Publisher: The Optical Society
Date: 27-06-2013
Publisher: SPIE-Intl Soc Optical Eng
Date: 2012
Publisher: Acoustical Society of America (ASA)
Date: 11-1999
DOI: 10.1121/1.428086
Abstract: A strong maximum of absorptivity (as much as dozens of per cent) of bulk shear acoustic waves by an ultra-thin layer of a non-Newtonian fluid between two solid surfaces is shown to be achieved at an optimal layer thickness. This optimal thickness is demonstrated to be usually much smaller than the wavelength and the wave penetration depth in the fluid. The coefficients of reflection, transmission, and absorption of shear waves polarized perpendicular to the plane of incidence are determined as functions of incidence angle, layer thickness, fluid viscosity, relaxation time(s), frequency, and parameters of solids. A frictional contact approximation, in which the layer can be considered as a contact with friction is justified for non-Newtonian fluids. The anomalous absorption of bulk shear waves in thin nonuniform fluid layers with viscosity and/or relaxation time varying across the layer is analyzed in the frictional contact approximation. It is shown that unlike the anomalous absorption in Newtonian fluids, the anomalous absorption in non-Newtonian fluid layers is frequency dependent even in the frictional contact approximation. This dependence is analyzed analytically and numerically.
Publisher: IOP Publishing
Date: 2011
Publisher: IEEE
Date: 12-2011
Publisher: Saudi Heart Association
Date: 10-2017
Publisher: Springer Science and Business Media LLC
Date: 15-01-2018
DOI: 10.1038/S41598-017-18714-Y
Abstract: A label-free microscopy method for assessing the differentiation status of stem cells is presented with potential application for characterization of therapeutic stem cell populations. The microscopy system is capable of characterizing live cells based on the use of evanescent wave microscopy and quantitative phase contrast (QPC) microscopy. The capability of the microscopy system is demonstrated by studying the differentiation of live immortalised neonatal mouse neural stem cells over a 15 day time course. Metrics extracted from microscope images are assessed and images compared with results from endpoint immuno-staining studies to illustrate the system’s performance. Results demonstrate the potential of the microscopy system as a valuable tool for cell biologists to readily identify the differentiation status of unlabelled live cells.
Publisher: SPIE
Date: 03-03-2017
DOI: 10.1117/12.2251349
Publisher: AIP
Date: 2005
DOI: 10.1063/1.1916817
Publisher: Springer Science and Business Media LLC
Date: 05-04-2008
DOI: 10.1007/S10856-008-3445-Y
Abstract: Polymeric tissue scaffolds are central to many regenerative medicine therapies offering a new approach to medicine. As the number of these regenerative therapies increases there is a pressing need for an improved understanding of the methods of scaffold fabrication. Of the many approaches to processing scaffolds, supercritical fluid fabrication methods have a distinct advantage over other techniques as they do not require the use of organic solvents, elevated processing temperatures or leaching processes. The work presented here is centred on the development of a new approach to monitoring supercritical scaffold fabrication based on determination of the scaffold acoustic impedance to inform protocols for scaffold fabrication. The approach taken uses an ultrasonic pulse-echo reflectometer enabling non-invasive monitoring of the supercritical environment on-line. The feasibility of this approach was investigated for two scaffolds of different molecular weight. Acoustic results demonstrate that differences in the physical properties of the two scaffolds could be resolved, particularly during the foaming process which correlated with findings from time-lapsed imaging and micro X-ray computed tomography (micro X-ray CT) images. Thus, this work demonstrates the feasibility of ultrasonic pulse-echo reflectometry to non-invasively study supercritical scaffold fabrication on-line providing a greater understanding of the scaffold fabrication process.
Publisher: SPIE
Date: 12-02-2009
DOI: 10.1117/12.812221
Publisher: Elsevier BV
Date: 08-2019
DOI: 10.1016/J.ACA.2019.02.026
Abstract: The employment of spectroscopically-resolved NMR techniques as analytical probes have previously been both prohibitively expensive and logistically challenging in view of the large sizes of high-field facilities. However, with recent advances in the miniaturisation of magnetic resonance technology, low-field, cryogen-free "benchtop" NMR instruments are seeing wider use. Indeed, these miniaturised spectrometers are utilised in areas ranging from food and agricultural analyses, through to human biofluid assays and disease monitoring. Therefore, it is both intrinsically timely and important to highlight current applications of this analytical strategy, and also provide an outlook for the future, where this approach may be applied to a wider range of analytical problems, both qualitatively and quantitatively.
Publisher: Wiley
Date: 10-07-2017
Abstract: A new approach for fluorescence imaging in optically turbid media centered on the use of nanoscale ultrasound-switchable FRET-based liposome contrast agents is reported. Liposomes containing lipophilic carbocyanine dyes as FRET pairs with emission wavelengths located in the near-infrared window are prepared. The efficacy of FRET and self-quenching for liposomes with a range of fluorophore concentrations is first calculated from measurement of the liposome emission spectra. Exposure of the liposomes to ultrasound results in changes in the detected fluorescent signal, the nature of which depends on the fluorophores used, detection wavelength, and the fluorophore concentration. Line scanning of a tube containing the contrast agents with 1 mm inner diameter buried at a depth of 1 cm in a heavily scattering tissue phantom demonstrates an improvement in image spatial resolution by a factor of 6.3 as compared with images obtained in the absence of ultrasound. Improvements are also seen in image contrast with the highest obtained being 9% for a liposome system containing FRET pairs. Overall the results obtained provide evidence of the potential the nanoscale ultrasound-switchable FRET-based liposomes studied here have for in vivo fluorescence imaging.
Publisher: IOP Publishing
Date: 02-10-2003
DOI: 10.1088/0031-9155/48/20/N01
Abstract: A technique is described for investigation of the ultrasonic attenuation coefficient for evaluation of absorbed dose in polymer gel dosimeters. Using this technique the attenuation coefficient as a function of absorbed dose in PAG and MAGIC polymer gel dosimeters was measured. The ultrasonic attenuation coefficient dose sensitivity for PAG was found to be 2.9 +/- 0.3 dB m(-1) Gy(-1) and for MAGIC gel 4.2 +/- 0.3 dB m(-1) Gy(-1). Unlike previous studies of ultrasonic attenuation in polymer gel dosimeters this technique enables a direct measure of the attenuation coefficient.
Publisher: IOP Publishing
Date: 06-2012
DOI: 10.1088/1748-6041/7/4/045011
Abstract: The amniotic membrane (AM) is considered as a natural cell culture substrate and has occasionally been exploited in regenerative medicine especially for ocular surface reconstruction and dermal wound healing applications. However, its use is limited by its relatively weak mechanical strength, difficulty during manual handling and susceptibility to proteolytic degradation in vivo. Therefore, in this study we aimed to enhance the mechanical and biological characteristics of the AM by enzymatically cross-linking it using tissue transglutaminase (TG)-a calcium-dependent enzyme capable of forming stable ε(γ-glutamyl)lysine cross-linkages. Using a biological catalyst such as TG does not only prevent denaturation during s le preparation but also minimizes the potential of residual chemical cross-linking agents compared to alternative methodologies. Human AM, sourced from elective caesarean sectioning, were treated with TG, bovine serum albumin and/or a no-treatment control. S les were then compared in terms of their physical and (scanning electron microscopy (SEM), transparency, mechanical strength, susceptibility to proteolytic degradation) biological characteristics (in vitro cell culture, activation of dendritic cells (DC)) and their in vivo biocompatibility/angiogenic capacity (chick chorioallantoic membrane assay). TG-treated AM exhibited enhanced mechanical strength and greater resistance to proteolytic/collagenase degradation compared to the control(s). SEM imaging of the TG-treated membrane summarized a significantly closer association and greater interconnectivity of in idual collagen fibres yet it had no effect on the overall transparency of the AM. In vitro cell culture demonstrated no detrimental effect of TG-treatment on the AM in terms of cell attachment, spreading, proliferation and differentiation. Moreover, an 'immune response' was not elicited based on extended in vitro culture with human-monocyte-derived DC. Interestingly, the TG-treated AM still allowed angiogenesis to occur and in some instances, demonstrated an enhancement compared to the control (n = 5). We hereby demonstrate that treating the AM with the cross-linking enzyme, TG, results in a novel biomaterial with enhanced mechanical and biological characteristics. Above all, this modified membrane demonstrates greater strength, maintains in vitro cell growth, retains optical transparency and allows angiogenesis to occur without inducing an immune response. Altogether, this study demonstrates the feasibility of TG as an alternate cross-linking treatment for the production of novel biomaterials and suggests that TG-treated AM may now be more commonly exploited as a therapeutic dressing for ocular or wound applications.
Publisher: The Optical Society
Date: 09-05-2012
DOI: 10.1364/OL.37.001658
Publisher: American Chemical Society (ACS)
Date: 20-03-2012
DOI: 10.1021/AC202994E
Abstract: Raman microspectroscopy (rms) was used to identify, image, and quantify potential molecular markers for label-free monitoring the differentiation status of live neural stem cells (NSCs) in vitro. Label-free noninvasive techniques for characterization of NCSs in vitro are needed as they can be developed for real-time monitoring of live cells. Principal component analysis (PCA) and linear discriminant analysis (LDA) models based on Raman spectra of undifferentiated NSCs and NSC-derived glial cells enabled discrimination of NSCs with 89.4% sensitivity and 96.4% specificity. The differences between Raman spectra of NSCs and glial cells indicated that the discrimination of the NSCs was based on higher concentration of nucleic acids in NSCs. Spectral images corresponding to Raman bands assigned to nucleic acids for in idual NSCs and glial cells were compared with fluorescence staining of cell nuclei and cytoplasm to show that the origin of the spectral differences were related to cytoplasmic RNA. On the basis of calibration models, the concentration of the RNA was quantified and mapped in in idual cells at a resolution of ~700 nm. The spectral maps revealed cytoplasmic regions with concentrations of RNA as high as 4 mg/mL for NSCs while the RNA concentration in the cytoplasm of the glial cells was below the detection limit of our instrument (~1 mg/mL). In the light of recent reports describing the importance of the RNAs in stem cell populations, we propose that the observed high concentration of cytoplasmic RNAs in NSCs compared to glial cells is related to the repressed translation of mRNAs, higher concentrations of large noncoding RNAs in the cytoplasm as well as their lower cytoplasm volume. While this study demonstrates the potential of using rms for label-free assessment of live NSCs in vitro, further studies are required to establish the exact origin of the increased contribution of the cytoplasmic RNA.
Publisher: IOP Publishing
Date: 03-12-2002
DOI: 10.1088/0031-9155/47/24/307
Abstract: Ultrasonic speed of propagation and attenuation were investigated as a function of absorbed radiation dose in PAG and MAGIC polymer gel dosimeters. Both PAG and MAGIC gel dosimeters displayed a dependence of ultrasonic parameters on absorbed dose with attenuation displaying significant changes in the dose range investigated. The ultrasonic attenuation dose sensitivity at 4 MHz in MAGIC gels was determined to be 4.7 +/- 0.3 dB m(-1) Gy(-1) and for PAG 3.9 +/- 0.3 dB m(-1) Gy(-1). Ultrasonic speed dose sensitivities were 0.178 +/- 0.006 m s(-1) Gy(-1) for MAGIC gel and -0.44 +/- 0.02 m s(-1) Gy(-1) for PAG. Density and compressional elastic modulus were investigated to explain the different sensitivities of ultrasonic speed to radiation for PAG and MAGIC gels. The different sensitivities were found to be due to differences in the compressional elastic modulus as a function of dose for the two formulations. To understand the physical phenomena underlying the increase in ultrasonic attenuation with dose, the viscoelastic properties of the gels were studied. Results suggest that at ultrasonic frequencies, attenuation in polymer gel dosimeters is primarily due to volume viscosity. It is concluded that ultrasonic attenuation significantly increases with absorbed dose. Also, the ultrasonic speed in polymer gel dosimeters is affected by changes in dosimeter elastic modulus that are likely to be a result of polymerization. It is suggested that ultrasound is a sufficiently sensitive technique for polymer gel dosimetry.
Publisher: Elsevier BV
Date: 05-2003
DOI: 10.1016/S0041-624X(03)00100-8
Abstract: It is demonstrated theoretically that the absorptivity of bulk shear sagittal waves by an ultra-thin layer of viscous fluid between two different elastic media has a strong maximum (in some cases as good as 100%) at an optimal layer thickness. This thickness is usually much smaller than the penetration depths and lengths of transverse and longitudinal waves in the fluid. The angular dependencies of the absorptivity are demonstrated to have significant and unusual structure near critical angles of incidence. The effect of non-Newtonian properties and non-uniformities of the fluid layer on the absorptivity is also investigated. In particular, it is shown that the absorption in a thin layer of viscous fluid is much more sensitive to non-zero relaxation time(s) in the fluid layer than the absorption at an isolated solid-fluid interface.
Publisher: Springer Berlin Heidelberg
Date: 2009
Publisher: American Chemical Society (ACS)
Date: 23-12-2019
Publisher: IOP Publishing
Date: 17-06-2005
Publisher: Frontiers Media SA
Date: 11-08-2020
Publisher: IOP Publishing
Date: 09-09-2010
DOI: 10.1088/1748-6041/5/5/055004
Abstract: Acoustics offers rich possibilities for characterizing and monitoring the biopolymer structures being employed in the field of biomedical engineering. Here we explore the rudimentary acoustic properties of two common biodegradable polymers: poly(lactic acid) and poly(lactic-co-glycolic acid). A pulse-echo technique is developed to reveal the bulk speed of sound, acoustic impedance and acoustic attenuation of small s les of the polymer across a pertinent temperature range of 0-70 °C. The glass transition appears markedly as both a discontinuity in the first derivative of the speed of sound and a sharp increase in the acoustic attenuation. We further extend our analysis to consider the role of ethanol, whose presence is observed to dramatically modify the acoustic properties and reduce the glass transition temperature of the polymers. Our results highlight the sensitivity of acoustic properties to a range of bulk properties, including visco-elasticity, molecular weight, co-polymer ratio, crystallinity and the presence of plasticizers.
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 09-2008
DOI: 10.1109/TUFFC.890
Publisher: SPIE
Date: 10-02-2011
DOI: 10.1117/12.873302
Publisher: Elsevier BV
Date: 09-2003
DOI: 10.1016/S0041-624X(03)00153-7
Abstract: Ultrasonic absorption in polymer gel dosimeters was investigated. An ultrasonic interferometer was used to study the frequency (f) dependence of the absorption coefficient (alpha) in a polyacrylamide gel dosimeter (PAG) in the frequency range 5-20 MHz. The frequency dependence of ultrasonic absorption deviated from that of an ideal viscous fluid. The presence of relaxation mechanisms was evidenced by the frequency dependence of alpha/f(2) and the dispersion in ultrasonic velocity. It was concluded that absorption in polymer gel dosimeters is due to a number of relaxation processes which may include polymer-solvent interactions as well as relaxation due to motion of polymer side groups. The dependence of ultrasonic absorption on absorbed dose and formulation was also investigated in polymer gel dosimeters as a function of pH and chemical composition. Changes in dosimeter pH and chemical composition resulted in a variation in ultrasonic dose response curves. The observed dependence on pH was considered to be due to pH induced modifications in the radiation yield while changes in chemical composition resulted in differences in polymerisation kinetics.
Publisher: MDPI AG
Date: 27-12-2018
DOI: 10.3390/HT8010002
Abstract: Novel sensing technologies for liquid biopsies offer promising prospects for the early detection of metabolic conditions through omics techniques. Indeed, high-field nuclear magnetic resonance (NMR) facilities are routinely used for metabolomics investigations on a range of biofluids in order to rapidly recognise unusual metabolic patterns in patients suffering from a range of diseases. However, these techniques are restricted by the prohibitively large size and cost of such facilities, suggesting a possible role for smaller, low-field NMR instruments in biofluid analysis. Herein we describe selected biomolecule validation on a low-field benchtop NMR spectrometer (60 MHz), and present an associated protocol for the analysis of biofluids on compact NMR instruments. We successfully detect common markers of diabetic control at low-to-medium concentrations through optimised experiments, including α-glucose (≤2.8 mmol/L) and acetone (25 µmol/L), and additionally in readily accessible biofluids, particularly human urine. We present a combined protocol for the analysis of these biofluids with low-field NMR spectrometers for metabolomics applications, and offer a perspective on the future of this technique appealing to ‘point-of-care’ applications.
Publisher: IOP Publishing
Date: 03-2008
DOI: 10.1088/1748-6041/3/1/015011
Abstract: Tissue scaffolds are integral to many regenerative medicine therapies, providing suitable environments for tissue regeneration. In order to assess their suitability, methods to routinely and reproducibly characterize scaffolds are needed. Scaffold structures are typically complex, and thus their characterization is far from trivial. The work presented in this paper is centred on the application of the principles of scaffold characterization outlined in guidelines developed by ASTM International. Specifically, this work demonstrates the capabilities of different imaging modalities and analysis techniques used to characterize scaffolds fabricated from poly(lactic-co-glycolic acid) using supercritical carbon dioxide. Three structurally different scaffolds were used. The scaffolds were imaged using: scanning electron microscopy, micro x-ray computed tomography, magnetic resonance imaging and terahertz pulsed imaging. In each case two-dimensional images were obtained from which scaffold properties were determined using image processing. The findings of this work highlight how the chosen imaging modality and image-processing technique can influence the results of scaffold characterization. It is concluded that in order to obtain useful results from image-based scaffold characterization, an imaging methodology providing sufficient contrast and resolution must be used along with robust image segmentation methods to allow intercomparison of results.
Publisher: AIP
Date: 2008
DOI: 10.1063/1.2902752
Publisher: Acoustical Society of America (ASA)
Date: 10-2004
DOI: 10.1121/1.4785251
Abstract: Measurements of ultrasonic compression wave attenuation as a function of frequency can provide a means to monitor suspensions of microscopic particles in liquids on-line in a process setting. Such mixtures are important in many industrial sectors including chemical, mineral, pharmaceutical, agrochemical and food. The ultrasonic data can be used to estimate the dispersed phase particle size distribution and to quantify dynamic effects such as flocculation and crystallization. The technique requires a detailed mathematical model to relate the ultrasonic wavenumber to mixture properties, and there are two distinct approaches to this—scattering and hydrodynamic. Although both have been shown to adequately describe sound propagation in dilute mixtures (up to ∼5% v/v), current models fail for concentrated suspensions of high density particles. The applicability of existing and future models of wave propagation in these suspensions will be greatly improved with more rigorous formulations for the local viscosity in the vicinity of a suspended particle, viscosity being the principal loss mechanism in such mixtures. In this paper five different theoretical formulations for local viscosity are investigated their effects on wavenumber when included in both scattering and hydrodynamic propagation theories are compared, with reference to experimental data.
Publisher: IOP Publishing
Date: 19-04-2002
DOI: 10.1088/0031-9155/47/9/302
Abstract: A new method for the evaluation of radiotherapy 3D polymer gel dosimeters has been developed using ultrasound to assess the significant structural changes that occur following irradiation of the dosimeters. The ultrasonic parameters of acoustic speed of propagation, attenuation and transmitted signal intensity were measured as a function of absorbed radiation dose. The dose sensitivities for each parameter were determined as 1.8 x 10(-4) s m(-1) Gy(-1), 3.9 dB m(-1) Gy(-1) and 3.2 V(-1) Gy(-1) respectively. All parameters displayed a strong variation with absorbed dose that continued beyond absorbed doses of 15 Gy. The ultrasonic measurements demonstrated a significantly larger dynamic range in dose response curves than that achieved with previously published magnetic resonance imaging (MRI) dose response data. It is concluded that ultrasound shows great potential as a technique for the evaluation of polymer gel dosimeters.
Publisher: The Optical Society
Date: 28-06-2013
DOI: 10.1364/AO.52.004755
Publisher: Elsevier BV
Date: 11-2015
DOI: 10.1016/J.JCIS.2015.06.052
Abstract: Droplet interface bilayers (DIBs) offer many favourable facets as an artificial membrane system but the influence of any residual oil that remains in the bilayer following preparation is ill-defined. In this study the fluorescent membrane probes di-8-butyl-amino-naphthyl-ethylene-pyridinium-propyl-sulfonate (Di-8-ANEPPS) and Fluoresceinphosphatidylethanolamine (FPE) were used to help understand the nature of the phospholipid-oil interaction and to examine any structural and functional consequences of such interactions on membrane bilayer properties. Concentration-dependent modifications of the membrane dipole potential were found to occur in phospholipid vesicles exposed to a variety of different oils. Incorporation of oil into the lipid bilayer was shown to have no significant effect on the movement of fatty acids across the lipid bilayer. Changes in membrane heterogeneity were, however, demonstrated with increased microdomain formation being visible in the bilayer following exposure to mineral oil, pentadecane and squalene. As it is important that artificial systems provide an accurate representation of the membrane environment, careful consideration should be taken prior to the application of DIBs in studies of membrane structure and organisation.
Publisher: Royal Society of Chemistry (RSC)
Date: 2023
DOI: 10.1039/D3NA00155E
Abstract: Non-integrated correlative light-electron microscopy with nitrogen vacancy sensing on transmission electron microscopy finder grids for the study of paramagnetic Prussian blue analogue nanoparticles.
Location: United Kingdom of Great Britain and Northern Ireland
Location: United Kingdom of Great Britain and Northern Ireland
Location: United Kingdom of Great Britain and Northern Ireland
Start Date: 2011
End Date: 2016
Funder: Engineering and Physical Sciences Research Council
View Funded ActivityStart Date: 2010
End Date: 2016
Funder: Engineering and Physical Sciences Research Council
View Funded ActivityStart Date: 2014
End Date: 2017
Funder: National Centre for the Replacement, Refinement and Reduction of Animals in Research
View Funded ActivityStart Date: 2014
End Date: 2015
Funder: Royal Society
View Funded ActivityStart Date: 2014
End Date: 2018
Funder: National Centre for the Replacement Refinement and Reduction of Animals in Research
View Funded ActivityStart Date: 2021
End Date: 2022
Funder: Engineering and Physical Sciences Research Council
View Funded ActivityStart Date: 2020
End Date: 2022
Funder: Biotechnology and Biological Sciences Research Council
View Funded ActivityStart Date: 2015
End Date: 2017
Funder: Engineering and Physical Sciences Research Council
View Funded ActivityStart Date: 2016
End Date: 2021
Funder: European Research Council
View Funded ActivityStart Date: 2008
End Date: 2011
Funder: Biotechnology and Biological Sciences Research Council
View Funded Activity