ORCID Profile
0000-0002-4855-0170
Current Organisations
Universidade Federal da Paraíba
,
CSIRO
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Public Library of Science (PLoS)
Date: 07-04-2014
Publisher: Public Library of Science (PLoS)
Date: 20-11-2012
Publisher: Elsevier BV
Date: 09-1992
Publisher: Wiley
Date: 16-11-2014
DOI: 10.1002/JBM.A.35027
Abstract: The deposition of new collagen in association with a medical implant has been studied using expanded polytetrafluoroethylene vascular replacement s les implanted subcutaneously in sheep, for up to 28 days. New type I collagen mRNA synthesis was followed by in situ hybridization, while the accumulation of new collagen types III, V, VI, XII, and XIV was followed by immunohistochemistry. All the collagen detected in the pores of the implant were newly deposited at various times after implantation and were not due to any pre-existing dermal collagen that may have been present around the implant. Collagen deposition was seen initially surrounding the implant and, with time, was seen to infiltrate within its pores. In situ hybridization showed that the majority of infiltrating cells had switched on mRNA that coded for type I collagen production. Histology showed that cellular infiltration increased with time, accompanied by increasing collagen deposition. The deposition of different collagen types happened at different rates. The type V and VI collagens preceded the major interstitial collagens in the newly deposited tissue, although at longer time points, detection of type V collagen appeared to decrease. After disruption of the interstitial collagens with enzyme, the "masked" type V collagen was clearly still visible by immunohistochemistry. Little type XII collagen could be seen within the porous mesh, although it was seen in the surrounding tissues. By contrast, type XIV was seen throughout the porous structure of the implanted mesh, with less being visible outside the material where type XII was more abundant.
Publisher: Elsevier BV
Date: 07-2016
DOI: 10.1016/J.ACTBIO.2016.05.010
Abstract: Pelvic Organ Prolapse (POP) is the herniation of pelvic organs into the vagina. Despite broad acceptance of mesh use in POP surgical repair, the complication rate is unacceptable. We hypothesized that collagen-containing polypropylene (PP) mesh types could modulate mesh-tissue integration and reduce long-term inflammation, thereby reducing mesh-associated complications. This study compared the long-term tissue response to an unmodified PP mesh and two collagen containing meshes in an ovine model which has similar pelvic anatomy and vaginal size to human. Three commercially available macroporous PP meshes, uncoated PP mesh (Avaulta Solo) (PP), the same textile PP mesh layered with a sheet of cross-linked porcine acellular matrix (Avaulta Plus) (PP-ACM) and a different yet also macroporous PP (Sofradim) mesh coated with solubilized atelocollagen (Ugytex) (PP-sCOL) were implanted in the ovine vagina and tissue explanted after 60 and 180days. The macrophage phenotype and response to implanted meshes, and vascularity were quantified by immunostaining and morphometry. We quantified changes in extracellular matrix composition biochemically and collagen organisation and percentage area around the interface of the mesh implants by Sirius Red birefringence and morphometry. PP-ACM induced a more sustained inflammatory response, indicated by similar CD45(+) leukocytes but reduced CD163(+) M2 macrophages at 60days (P<0.05). PP-sCOL increased Von Willebrand Factor (vWF)-immunoreactive vessel profiles after 60days. At the micro-molecular level, collagen birefringence quantification revealed significantly fewer mature collagen fibrils (red, thick fibrils) at the mesh-tissue interface than control tissue for all mesh types (P<0.001) but still significantly greater than the proportion of immature (green thin fibrils) at 60days (P<0.05). The proportion of mature collagen fibrils increased with time around the mesh filaments, particularly those containing collagen. The total collagen percent area at the mesh interface was greatest around the PP-ACM mesh at 60days (P<0.05). By 180days the total mature and immature collagen fibres at the interface of the mesh filaments resembled that of native tissue. In particular, these results suggest that both meshes containing collagen evoke different types of tissue responses at different times during the healing response yet both ultimately lead to physiological tissue formation approaching that of normal tissue. Pelvic organ prolapse (POP) is the descent of the pelvic organs to the vagina. POP affects more than 25% of all women and the lifetime risk of undergoing POP surgery is 19%. Although synthetic polypropylene (PP) meshes have improved the outcome of the surgical treatment for POP, there was an unacceptable rate of adverse events including mesh exposure and contracture. It is hypothesized that coating the PP meshes with collagen would provide a protective effect by preventing severe mesh adhesions to the wound, resulting in a better controlled initial inflammatory response, and diminished risk of exposure. In this study we assessed the effect of two collagen-containing PP meshes on the long-term vaginal tissue response using new techniques to quantify these tissue responses.
Publisher: Springer Science and Business Media LLC
Date: 05-1998
DOI: 10.1007/BF02253470
Abstract: [This corrects the article DOI: 10.1055/a-1924-3525.].
Publisher: Wiley
Date: 03-1996
DOI: 10.1111/J.1365-2958.1996.TB02464.X
Abstract: Vpr is a virion-associated protein of human immunodeficiency virus type 1 (HIV-1) whose function in acquired immune deficiency syndrome (AIDS) has been uncertain. We previously employed yeast as a model to examine the effects of Vpr on basic cellular functions intracellular Vpr was shown to cause cell-growth arrest and structural defects, and these effects were caused by a region of Vpr containing the sequence HFRIGCRHSRIG. Here we show that peptides containing the H(S/F)RIG amino acid sequence motif cause death when added externally to a variety of yeast including Saccharomyces cerevisiae, Kluyveromyces lactis, Candida glabrata, Candida albicans and Schizosaccharomyces pombe. Such peptides rapidly entered the cell from the time of addition, resulting in cell death. Elevated levels of ions, particularly magnesium and calcium ions, abrogated the cytotoxic effect by preventing the Vpr peptides from entering the cells. Extracellular Vpr found in the serum, or breakdown products of extracellular Vpr, may have similar effects to the Vpr peptides described here and could explain the death of uninfected bystander cells during AIDS.
Publisher: Wiley
Date: 07-2008
Publisher: Elsevier BV
Date: 11-2023
Publisher: American Chemical Society (ACS)
Date: 05-04-2023
Publisher: Elsevier BV
Date: 05-2011
Publisher: American Chemical Society (ACS)
Date: 27-08-2014
DOI: 10.1021/BM500654Q
Abstract: Effective control over biointerfacial interactions is essential for a broad range of biomedical applications. At this point in time, only a relatively small range of radically polymerizable monomers have been described that are able to generate low fouling polymer materials and surfaces. The most important ex les that have been successfully used in the context of the reduction of nonspecific protein adsorption and subsequent cell attachment include PEG-based monomers such as poly(ethylene glycol) methacrylate (PEGMA), zwitterionic monomers such as 2-methacryloyloxyethyl phosphorylcholine and noncharged monomers such as acrylamide and N-(2-hydroxypropyl) methacrylamide (HPMAm). However, issues such as oxidative degradation and poor polymerization characteristics limit the applicability of most of these candidates. Here we have synthesized the monomer N-(2-hydroxypropyl) acrylamide (HPAm), examined its polymerization kinetics and evaluated its suitability for RAFT mediated polymerization in comparison to HPMAm. We also synthesized hydrogels using HPMAm and HPAm and evaluated the ability of HPAm polymers to occlude protein adsorption and cell attachment. In RAFT-controlled polymerization, much faster (8×) polymerization was observed for HPAm relative to HPMAm and better control was achieved over the molecular weight distribution. The performance of hydrogels prepared from HPAm in the prevention of protein adsorption and cellular attachment was equivalent to or better than that observed for materials made from HPMAm and PEG. These results open the door for HPAm based polymers in applications where effective control over biointerfacial interactions is required.
Publisher: Elsevier BV
Date: 02-2005
Publisher: Elsevier BV
Date: 09-2010
DOI: 10.1016/J.ACTBIO.2010.02.040
Abstract: This paper describes the synthesis and characterization of an injectable methacrylate functionalized urethane-based photopolymerizable prepolymer to form biodegradable hydrogels. The tetramethacrylate prepolymer was based on the reaction between two synthesized compounds, diisocyanato poly(ethylene glycol) and monohydroxy dimethacrylate poly(epsilon-caprolactone) triol. The final prepolymer was hydrated with phosphate-buffered saline (pH 7.4) to yield a biocompatible hydrogel containing up to 86% water. The methacrylate functionalized prepolymer was polymerized using blue light (450 nm) with an initiator, c horquinone and a photosensitizer, N,N-dimethylaminoethyl methacrylate. The polymer was stable in vitro in culture media over the 28 days tested (1.9% mass loss) in the presence of lipase, around 56% mass loss occurred over the 28 days in vitro. Very little degradation occurred in vivo in rats over the same time period. The polymer was well tolerated with very little capsule formation and a moderate host tissue response. Human chondrocytes, seeded onto Cultispher-S beads, were viable in the tetramethacrylate prepolymer and remained viable during and after polymerization. Chondrocyte-bead-polymer constructs were maintained in static and spinner culture for 8 weeks. During this time, cells remained viable, proliferated and migrated from the beads through the polymer towards the edge of the polymer. New extracellular matrix (ECM) was visualized with Masson's trichrome (collagen) and Alcian blue (glycosaminoglycan) staining. Further, the composition of the ECM was typical for articular cartilage with prominent collagen type II and type VI and moderate keratin sulphate, particularly for tissue constructs cultured under dynamic conditions.
Publisher: Springer Science and Business Media LLC
Date: 04-10-2013
DOI: 10.1038/SREP02864
Publisher: American Chemical Society (ACS)
Date: 02-09-2022
DOI: 10.1021/ACS.MOLPHARMACEUT.1C00518
Abstract: Tirapazamine (TPZ) and its derivatives (TPZD) have shown their great potential for efficiently killing hypoxic cancer cells. However, unsatisfactory clinical outcomes resulting from the low bioavailability of the low-molecular TPZ and TPZD limited their further applications. Precise delivery and release of these prodrugs via functional nanocarriers can significantly improve the therapeutic effects due to the targeted drug delivery and enhanced permeability and retention (EPR) effect. Herein, zwitterionic block copolymer (BCP) micelles with aldehyde functional groups are prepared from the self-assembly of poly(2-methacryloyloxyethyl phosphorylcholine-
Publisher: American Chemical Society (ACS)
Date: 06-05-2021
Publisher: American Chemical Society (ACS)
Date: 06-2023
Publisher: American Chemical Society (ACS)
Date: 29-07-2022
Abstract: Solid-state sensing platforms are desirable for the development of reusable sensors to promote public health measures such as testing for drinking water contamination. A bioinspired metal-organic framework (MOF)-based material has been developed by imitating metal-protein interactions in biological systems to attain high sensitivity and selectivity to Pb
Publisher: Springer Science and Business Media LLC
Date: 11-1995
DOI: 10.1007/BF01322693
Publisher: Springer Science and Business Media LLC
Date: 14-10-2022
DOI: 10.1038/S41598-022-21715-1
Abstract: Nanoparticles and nano-delivery systems are constantly being refined and developed for biomedical applications such as imaging, gene therapy, and targeted delivery of drugs. Nanoparticles deliver beneficial effects by both release of their cargo and by liberation of their constitutive structural components. The N- acylethanolamines linoleoyl ethanolamide (LEA) and oleoyl ethanolamide (OEA) both exhibit endocannabinoid-like activity. Here, we report on their ability to form nanoparticles that when conjugated with tissue-specific molecules, are capable of localizing to specific areas of the body and reducing inflammation. The facilitation of pharmacological effects by endocannabinoids at targeted sites provides a novel biocompatible drug delivery system and a therapeutic approach to the treatment, patient management and quality of life, in conditions such as arthritis, epilepsy, and cancer.
Publisher: Wiley
Date: 28-03-2013
Abstract: Several growth factors feature prominently in the control of hematopoiesis. Thrombopoietin, a class I hematopoietic cytokine, plays critical roles in regulating hematopoietic stem cell numbers and also stimulates the production and differentiation of megakaryocytes, the bone marrow cells that ultimately produce platelets. Thrombopoietin interacts with the c-Mpl cell-surface receptor. Recently, several peptide and small-molecule agonists and antagonists of c-Mpl have been reported. We conducted a bioinformatics and molecular modeling study aimed at understanding the agonist activities of peptides that bind to c-Mpl, and developed new potent peptide agonists with low nanomolar activity. These agonists also show very high activity in human CD34(+) primary cell cultures, and doubled the mean blood platelet counts when injected into mice.
Publisher: American Society of Hematology
Date: 03-03-2022
Abstract: RNA processing is increasingly recognized as a critical control point in the regulation of different hematopoietic lineages including megakaryocytes responsible for the production of platelets. Platelets are anucleate cytoplasts that contain a rich repertoire of RNAs encoding proteins with essential platelet functions derived from the parent megakaryocyte. It is largely unknown how RNA binding proteins contribute to the development and functions of megakaryocytes and platelets. We show that serine-arginine–rich splicing factor 3 (SRSF3) is essential for megakaryocyte maturation and generation of functional platelets. Megakaryocyte-specific deletion of Srsf3 in mice led to macrothrombocytopenia characterized by megakaryocyte maturation arrest, dramatically reduced platelet counts, and abnormally large functionally compromised platelets. SRSF3 deficient megakaryocytes failed to reprogram their transcriptome during maturation and to load platelets with RNAs required for normal platelet function. SRSF3 depletion led to nuclear accumulation of megakaryocyte mRNAs, demonstrating that SRSF3 deploys similar RNA regulatory mechanisms in megakaryocytes as in other cell types. Our study further suggests that SRSF3 plays a role in sorting cytoplasmic megakaryocyte RNAs into platelets and demonstrates how SRSF3-mediated RNA processing forms a central part of megakaryocyte gene regulation. Understanding SRSF3 functions in megakaryocytes and platelets provides key insights into normal thrombopoiesis and platelet pathologies as SRSF3 RNA targets in megakaryocytes are associated with platelet diseases.
Publisher: Elsevier BV
Date: 11-2023
Publisher: Wiley
Date: 20-01-2021
Publisher: Elsevier BV
Date: 1993
DOI: 10.1016/0267-6605(93)90013-W
Abstract: The Omniflow Vascular Prosthesis is a collagen--polyester composite which has been used successfully for peripheral vascular replacement. In this study, we have examined the distribution of the various connective tissue components and the ultrastructural organisation of these in order to understand and allow improvement of its functional properties. Using immunohistology with specific monoclonal antibodies, types I and III collagens were found to be the major components throughout the prosthesis. Type VI collagen was also present but was mainly associated with cells, particularly around the polyester mesh and silicone interfaces. While elastin was absent, two elastic tissue microfibrillar proteins were present uniformly throughout the structure. Ultrastructurally, clear differences existed between the local environments of the inner surface, which had formed around the silicone mandrel, the polyester mesh within the prosthesis, and the outer collagenous tissue which formed the central wall. At the inner surface, the amount of collagen was less and the orientation of these fibres was not well defined. The collagen fibrils in the polyester region were smaller than those of the main wall, which were well ordered and orientated along the axis of the device.
Publisher: MDPI AG
Date: 02-04-2021
DOI: 10.3390/MIN11040377
Abstract: Osteoporosis is a public health problem, with bone loss being the main consequence. Hydroxyapatite (HA) has been largely used as a bioceramic to stimulate bone growth. In our work, a cerium-containing HA (Ce-HA) has been proposed and its effects on the antimicrobial and bone-inducing properties were investigated. The synthesis of the materials occurred by the suspension–precipitation method (SPM). The XRD (X-ray Diffraction) confirmed the crystalline phase, and the Rietveld refinement confirmed the crystallization of HA and Ce-HA in a hexagonal crystal structure in agreement with ICSD n° 26205. Characterizations by FT-IR (Fourier Transform Infrared Spectroscopy), XPS (X-ray Photoemission Spectroscopy), and FESEM-EDS (Field Emission Scanning Electron Microscope-Energy Dispersive X-ray Spectroscopy) confirmed the presence of cerium (Ce3+ and Ce4+). The antibacterial activity of Has was evaluated against Staphylococcus aureus 25,923 and Escherichia coli 25,922 strains, which revealed that the material has antimicrobial properties and the cytotoxicity assay indicated that Ce-containing HA was classified as non-toxic. The effects of Ce-HA on bone repair, after application in bone defects in the tibia of female rats with osteoporosis induced by ovariectomy (OVX), were evaluated. After 15 and 30 days of implantation, the s les were analyzed by Raman, histology and X-ray microtomography. The results showed that the animals that had the induced bone defects filled with the Ce-HA materials had more expressive bone neoformation than the control group.
Publisher: Springer Science and Business Media LLC
Date: 17-01-2022
DOI: 10.1038/S41467-022-28012-5
Abstract: A depleted antimicrobial drug pipeline combined with an increasing prevalence of Gram-negative ‘superbugs’ has increased interest in nano therapies to treat antibiotic resistance. As cubosomes and polymyxins disrupt the outer membrane of Gram-negative bacteria via different mechanisms, we herein examine the antimicrobial activity of polymyxin-loaded cubosomes and explore an alternative strategy via the polytherapy treatment of pathogens with cubosomes in combination with polymyxin. The polytherapy treatment substantially increases antimicrobial activity compared to polymyxin B-loaded cubosomes or polymyxin and cubosomes alone. Confocal microscopy and neutron reflectometry suggest the superior polytherapy activity is achieved via a two-step process. Firstly, electrostatic interactions between polymyxin and lipid A initially destabilize the outer membrane. Subsequently, an influx of cubosomes results in further membrane disruption via a lipid exchange process. These findings demonstrate that nanoparticle-based polytherapy treatments may potentially serve as improved alternatives to the conventional use of drug-loaded lipid nanoparticles for the treatment of “superbugs”.
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7CC00846E
Abstract: Novel X-ray crystal structures of cyclic d / l peptide nanotubes in antiparallel and parallel configurations.
Publisher: Elsevier BV
Date: 11-1992
DOI: 10.1016/0168-1702(92)90152-Y
Abstract: Recombinant influenza neuraminidase (NA, subtype 2, A/NT/60/68) was produced by recombinant baculovirus-infected insect cells. The recombinant NA retained enzyme activity and was located on the cell surface. Enzyme activity was both cell-associated and in the cell free supernatant maximal NA activity was found in the supernatant. Recombinant NA was recognised by polyclonal antisera and by three monoclonal antibodies specific for NA (subtype 2). Enzyme activity was also neutralised by polyclonal antisera. Recombinant NA thus retains most of the immunological and activity properties of authentic influenza NA. Immunoprecipitation of [35S]Methionine-labelled cells and supernatant and partial purification of NA indicated that a approximately 50-kDa form of NA was present in the supernatant, whilst the expected size (approximately 67-kDa) was cell-associated. Purified recombinant extracellular virus was also enzymatically active, and contained the 67-kDa NA which was located on the membrane capsule of the virus. This suggests that the virus had acquired the cell-associated form of recombinant NA during the budding process from the cell.
Publisher: Elsevier BV
Date: 10-2022
DOI: 10.1016/J.JCONREL.2022.08.027
Abstract: Peptide-based hydrogels represent promising systems for the sustained release of different types of drugs, ranging from small molecules to biologicals. Aiming at subcutaneous injection, which is a desirable parenteral administration route, especially for biologicals, we herein focus on physically crosslinked systems possessing thixotropic behaviour. The purpose of this study was to evaluate the in vitro and in vivo properties of hydrogels based on the hipathic hexapeptide H-FQFQFK-NH
Publisher: MDPI AG
Date: 27-04-2022
Abstract: As the most abundant protein in the extracellular matrix, collagen has become widely studied in the fields of tissue engineering and regenerative medicine. Of the various collagen types, collagen type I is the most commonly utilised in laboratory studies. In tissues, collagen type I forms into fibrils that provide an extended fibrillar network. In tissue engineering and regenerative medicine, little emphasis has been placed on the nature of the network that is formed. Various factors could affect the network structure, including the method used to extract collagen from native tissue, since this may remove the telopeptides, and the nature and extent of any chemical modifications and crosslinking moieties. The structure of any fibril network affects cellular proliferation and differentiation, as well as the overall modulus of hydrogels. In this study, the network-forming properties of two distinct forms of collagen (telo- and atelo-collagen) and their methacrylated derivatives were compared. The presence of the telopeptides facilitated fibril formation in the unmodified s les, but this benefit was substantially reduced by subsequent methacrylation, leading to a loss in the native self-assembly potential. Furthermore, the impact of the methacrylation of the collagen, which enables rapid crosslinking and makes it suitable for use in 3D printing, was investigated. The crosslinking of the methacrylated s les (both telo- and atelo-) was seen to improve the fibril-like network compared to the non-crosslinked s les. This contrasted with the s les of methacrylated gelatin, which showed little, if any, fibrillar or ordered network structure, regardless of whether they were crosslinked.
Publisher: Informa UK Limited
Date: 1997
DOI: 10.3109/03008209709160218
Abstract: The localization and fibrillar organization of collagen types V and III in the human and bovine corneal stromas were studied. In the chicken cornea, type V co-assembles with type I collagen as heterotypic fibrils and this interaction is involved in the regulation of fibril diameter necessary for corneal transparency. To determine whether this is a regulatory mechanism common to the corneas of different species the human and bovine corneal stroma were studied. Collagen type V was found in the epithelium and Bowman's membrane in the untreated adult human and bovine cornea using immunofluorescence microscopy. In the absence of any treatment, there was no type V reactivity within the stroma. However, type V collagen was detected homogeneously throughout the corneal stroma after treatments that partially disrupt fibril structure. The reactivity was strongest in the cornea, weaker in the limbus and weakest in the sclera. Fetal corneas showed similar reactivity for type V collagen, but unlike the adult, the stroma was slightly reactive. Immunoelectron microscopy demonstrated that type V collagen was associated with disrupted, but not with intact, fibrils in both human and bovine corneal stroma. Type III collagen reactivity was not detected in the cornea, but was present subepithelially in the limbus and in the scleral stroma. These data indicate that type V collagen is a component of striated collagen fibrils throughout the human and bovine corneal stromas. The interaction of type I and V collagen as heterotypic fibrils masks the helical epitope recognized by the monoclonal antibody against type V collagen. The heterotypic interactions of collagen type V indicate a role in the regulation of fibril diameter analogous to that described in the avian cornea.
Publisher: Wiley
Date: 16-07-2009
DOI: 10.1002/JBM.A.32572
Abstract: Tissue adhesives and sealants are commonly used in surgery either as an adjunct to, or replacement for, sutures. Previously, we have shown that fibrinogen can be crosslinked rapidly to give a high-strength bond in the presence of a ruthenium(II) complex, a persulfate and irradiation with visible light, and that the crosslinked fibrinogen is nontoxic to cells in vitro. This approach addresses limitations to current fibrin sealants that typically have relatively slow curing times and low bond strengths. In the present study, we have evaluated the efficacy and safety of this new biological scaffold sealant in various animal models. When placed as solid implants into rats, the crosslinked fibrinogen persisted for at least 8 weeks but was fully resorbed by 18 weeks with minimal inflammatory responses. When used as a tissue adhesive for repair of skin incisions in rats or as an arterial haemostat in pig, the photo-crosslinked fibrinogen sealed tissue or arrested bleeding within 20 s of application. For the skin incisions, the fibrinogen sealant promoted rapid tissue vascularization and cellular infiltration with no adverse foreign body cell generation. New collagen deposition occurred and with time the matrix had remodelled to acquire large mature collagen fiber bundles which were accompanied by maximum regenerated tensile strength. This biomaterial system may find useful applications in surgical procedures where rapid curing and/or high strength tissue sealing is required.
Publisher: Springer Science and Business Media LLC
Date: 02-12-2006
Publisher: Springer Science and Business Media LLC
Date: 25-04-2018
DOI: 10.1007/S10561-018-9694-1
Abstract: Current regulatory requirements demand an in-depth understanding and validation of protocols used in tissue banking. The aim of this work was to characterize the quality of split thickness skin allografts cryopreserved or manufactured using highly concentrated solutions of glycerol (50, 85 or 98%), where tissue water activity (a
Publisher: Frontiers Media SA
Date: 13-01-2023
DOI: 10.3389/FCHEM.2022.1009468
Abstract: Microbial resistance to common antibiotics is threatening to cause the next pandemic crisis. In this context, antimicrobial peptides (AMPs) are receiving increased attention as an alternative approach to the traditional small molecule antibiotics. Here, we report the bi-functional rational design of Fmoc-peptides as both antimicrobial and hydrogelator substances. The tetrapeptide Fmoc-WWRR-NH 2 —termed Priscilicidin—was rationally designed for antimicrobial activity and molecular self-assembly into nanostructured hydrogels. Molecular dynamics simulations predicted Priscilicidin to assemble in water into small oligomers and nanofibrils, through a balance of aromatic stacking, hiphilicity and electrostatic repulsion. Antimicrobial activity prediction databases supported a strong antimicrobial motif via sequence analogy. Experimentally, this ultrashort sequence showed a remarkable hydrogel forming capacity, combined to a potent antibacterial and antifungal activity, including against multidrug resistant strains. Using a set of biophysical and microbiology techniques, the peptide was shown to self-assemble into viscoelastic hydrogels, as a result of assembly into nanostructured hexagonal mesophases. To further test the molecular design approach, the Priscilicidin sequence was modified to include a proline turn—Fmoc-WPWRR-NH 2 , termed P-Priscilicidin–expected to disrupt the supramolecular assembly into nanofibrils, while predicted to retain antimicrobial activity. Experiments showed P-Priscilicidin self-assembly to be effectively hindered by the presence of a proline turn, resulting in liquid s les of low viscosity. However, assembly into small oligomers and nanofibril precursors were evidenced. Our results augur well for fast, adaptable, and cost-efficient antimicrobial peptide design with programmable physicochemical properties.
Publisher: American Chemical Society (ACS)
Date: 16-01-2019
DOI: 10.1021/ACS.MOLPHARMACEUT.8B00890
Abstract: Development of an effective and potent RNA delivery system remains a challenge for the clinical application of RNA therapeutics. Herein, we describe the development of an RNA delivery platform derived from self-assembled bicontinuous cubic lyotropic liquid crystalline phases, functionalized with zinc coordinated lipids. These metallo-cubosomes were prepared from a series of novel lipidic zinc(II)-bis(dipicolylamine) (Zn
Publisher: American Chemical Society (ACS)
Date: 05-04-2018
Abstract: In this study, an injectable, photocurable gelatin system, consisting of acrylated gelatin and thiolated gelatin, with tunable mechanical, biodegradation, and biological properties was used as a potential cell-supportive scaffold for the repair of focal corneal wounds. The mechanical property of hydrogels can be readily modified (postcure shear modulus of between 0.3 and 22 kPa) by varying the ratio of acrylate to thiol groups, photointensity, and solid content, and the biodegradation times also varied with the change of solid content. More importantly, the generated hydrogels exhibited excellent cell viability in both cell seeding and cell encapsulation experiments. Furthermore, the hydrogels were found to be biocompatible with rabbit cornea and aided the regeneration of a new tissue under a focal corneal wound (exhibiting epithelial wound coverage in <3d), and ultraviolet irradiation did not have any obvious harmful effect on the cornea and posterior eye segment tissues. Along with their injectability and tunable mechanical properties, the photocurable thiol-acrylate hydrogels showed promise as corneal substitutes or substrates to construct a new corneal tissue.
Publisher: American Chemical Society (ACS)
Date: 07-09-2005
DOI: 10.1021/BM050335E
Abstract: When provoked, Notaden bennetti frogs secrete an exudate which rapidly forms a tacky elastic solid ("frog glue"). This protein-based material acts as a promiscuous pressure-sensitive adhesive that functions even in wet conditions. We conducted macroscopic tests in air to assess the tensile strength of moist glue (up to 78 +/- 8 kPa) and the shear strength of dry glue (1.7 +/- 0.3 MPa). We also performed nanomechanical measurements in water to determine the adhesion (1.9-7.2 nN or greater), resilience (43-56%), and elastic modulus (170-1035 kPa) of solid glue collected in different ways. Dry glue contains little carbohydrate and consists mainly of protein. The protein complement is rich in Gly (15.8 mol %), Pro (8.8 mol %), and Glu/Gln (14.1 mol %) it also contains some 4-hydroxyproline (4.6 mol %) but no 5-hydroxylysine or 3,4-dihydroxyphenylalanine (L-Dopa). Denaturing gel electrophoresis of the glue reveals a characteristic pattern of proteins spanning 13-400 kDa. The largest protein (Nb-1R, apparent molecular mass 350-500 kDa) is also the most abundant, and this protein appears to be the key structural component. The solid glue can be dissolved in dilute acids raising the ionic strength causes the glue components to self-assemble spontaneously into a solid which resembles the starting material. We describe scattering studies on dissolved and solid glue and provide microscopy images of glue surfaces and sections, revealing a porous interior that is consistent with the high water content (85-90 wt %) of moist glue. In addition to compositional similarities with other biological adhesives and well-known elastomeric proteins, the circular dichroism spectrum of dissolved glue is almost identical to that for soluble elastin and electron and scanning probe microscopy images invite comparison with silk fibroins. Covalent cross-linking does not seem to be necessary for the glue to set.
Publisher: Public Library of Science (PLoS)
Date: 22-08-2014
Publisher: Elsevier BV
Date: 04-2022
DOI: 10.1016/J.ACTBIO.2022.02.002
Abstract: The invaluable health, economic and social impacts of vaccination are hard to exaggerate. The ability to stabilize vaccines is urgently required for their equitable distribution without the dependence on the 'cold-chain' logistics. Herein, for the first time we report biomimetic-mineralization of live-viral vaccines using metal-organic frameworks (MOFs) to enhance their storage stability from days to months. Applying ZIF-8 and aluminium fumarate (Alfum), the Newcastle Disease Virus (NDV) V4 strain and Influenza A WSN strain were encapsulated with remarkable retention of their viral titre. The ZIF-8@NDV, ZIF-8@WSN and Alfum@WSN composites were validated for live-virus recovery using a tissue culture infectious dose (TCID
Publisher: American Chemical Society (ACS)
Date: 16-06-2010
DOI: 10.1021/CB100100U
Abstract: Molecules that mimic the cytokine thrombopoietin that act by an atypical mechanism of binding to a receptor transmembrane (TM) domain are widely understood to require zinc for their biological activity. We investigated potent thrombopoietin mimetics from three chemical classes including the recently registered drug Eltrombopag, which operate via this novel mechanism, to determine whether zinc is essential for inducing cell proliferation. Using addition of zinc and a potent metal chelator, we show that the existing paradigm is incorrect and the compounds exhibit excellent thrombopoietin-mimetic activity even in the presence of high concentrations of EDTA. The implications of these findings for the mechanism of action are discussed.
Publisher: Elsevier BV
Date: 08-2011
DOI: 10.1016/J.BIOMATERIALS.2011.03.078
Abstract: We demonstrate the distribution of the important extracellular matrix protein laminin in a novel biomaterial consisting of a hydrogel underpinned by nanofibrillar networks. These are formed by the immobilised enzyme mediated self-assembly of fmoc-L(3) (9-fluorenylmethoxycarbonyl-tri-leucine). The peptide assembly yields nanofibrils formed of β-sheets that are locked together via π-stacking interactions. This ordering allows the localisation of the peptide sidechains on the surface, creating a hydrophobic environment. This induces the formation of bundles of these nanofibrils producing a clear hydrogel. This mechanism enables the three dimensional distribution of laminin throughout the network via supramolecular interactions. These forces favour the formation and improve the order of the network itself, as observed by spectroscopic and mechanical testing. In order to test the stability and suitability of this class of material for in vivo applications, we utilise microinjection to deliver the biomaterial under fine spatial control into a dystrophic zebrafish model organism, which lacks laminin as a result of a genetic mutation. Using confocal and transmission electron microscopy, we confirm that the biomaterial remains stable structurally, and is confined spatially to the site of injection.
Publisher: Elsevier BV
Date: 2023
Publisher: Wiley
Date: 30-09-2014
DOI: 10.1002/JBM.A.35335
Abstract: The present study has evaluated a commercial pericardial material for its capacity to assist as a natural extracellular matrix (ECM) patch for the delivery and retention of mesenchymal stem cells for cardiac repair. The repair of cardiac tissue with cells delivered by an appropriate bioscaffold is expected to offer a superior, long-lasting treatment strategy. The present material, CardioCel®, is based on acellular pericardium that has been stabilized by treatments, including a low concentration of glutaraldehyde, that eliminate calcification after implantation. In the present study, we have assessed this material using human bone marrow mesenchymal stem cells at various cell densities under standard, static cell culture conditions. The initial seeding densities were monitored to evaluate the extent of cell attachment and cell viability, with subsequent cell proliferation assessed up to 4 weeks using an MTS assay. Cell morphology, infiltration, and spreading were tracked using scanning electron microscopy and phalloidin staining. The efficacy of long-term cell survival was further assessed by examining the extent and type of new tissue formation on seeded scaffolds at 70 days both type I and type III collagens were present in fibrillar structures on these scaffolds indicating that the seeded stem cells had the capacity to differentiate into collagen-producing cells necessary to repair damaged ECM. These data show that the CardioCel® scaffold is an appropriate substrate for the stem cells and has the potential to both retain seeded stem cells and to act as a template for cell propagation and new tissue formation.
Publisher: Elsevier BV
Date: 07-2010
DOI: 10.1016/J.BIOMATERIALS.2010.03.054
Abstract: There is a large biomanufacturing and clinical need for cost-effective and simple techniques to expand mesenchymal stem cells whilst retaining their multipotency. Endosteum-derived particles were prepared, characterised and examined as a biomaterial to facilitate the in vitro expansion of human mesenchymal stem cells. Bovine endosteum-derived particles are composed of chondroitin sulphate glycosaminoglycans with 4- and 6-sulphation and N-sulphated heparan sulphate glycosaminoglycans. The particles were positive for perlecan, laminin and fibronectin by immunohistochemistry and alpha-mannose, alpha-glucose, terminal N-acetyl-alpha-D-glucosamine, N-acetyl-alpha-galactosamine and alpha-fucose, using lectin binding. Human mesenchymal stem cells showed greater than 96% attachment to the particles after one day in spinner culture. After 7 days, the stem cells on decalcified particles were viable and had a 5-fold higher growth than the stem cells grown on Cytodex-2 beads. Significantly more stem cells were recovered from decalcified particles compared with mineralised particles (P < 0.05). Differentiation to chondrogenic, osteogenic and adipogenic lineages was maintained after culturing stem cells on the demineralised particles. We conclude that bovine endosteum-derived particles can be extracted from bone marrow to retain sulphated proteoglycans and glycosylated proteins. These particles are a suitable biomaterial for supporting the growth and retaining the multipotency of human mesenchymal stem cells.
Publisher: Elsevier BV
Date: 02-2015
DOI: 10.1016/J.ACTBIO.2014.10.043
Abstract: Use of synthetic clinical meshes in pelvic organ prolapse (POP) repair can lead to poor mechanical compliance in vivo, as a result of a foreign body reaction leading to excessive scar tissue formation. Seeding mesh with mesenchymal stem cells (MSCs) prior to implantation may reduce the foreign body reaction and lead to improved biomechanical properties of the mesh-tissue complex. This study investigates the influence of seeding human endometrial mesenchymal stem cells (eMSCs) on novel gelatin-coated polyamide scaffolds, to identify differences in scaffold/tissue biomechanical properties and new tissue growth following up to 90 days' implantation, in a subcutaneous rat model of wound repair. Scaffolds were subcutaneously implanted, either with or without eMSCs, in immunocompromised rats and following 7, 30, 60 and 90 days were removed and assessed for their biomechanical properties using uniaxial tensile testing. Following 7, 30 and 90 days' implantation scaffolds were assessed for tissue ingrowth and organization using histological staining and scanning electron microscopy. The eMSCs were associated with altered collagen growth and organization around the mesh filaments of the scaffold, affecting the physiologically relevant tensile properties of the scaffold-tissue complex, in the toe region of the load-elongation curve. Scaffolds seeded with eMSCs were significantly less stiff on initial stretching than scaffolds implanted without eMSCs. Collagen growth and organization were enhanced in the long-term in eMSC-seeded scaffolds, with improved fascicle formation and crimp configuration. Results suggest that neo-tissue formation and remodelling may be enhanced through seeding scaffolds with eMSCs.
Publisher: Springer Science and Business Media LLC
Date: 13-04-2023
DOI: 10.1038/S41467-023-37780-7
Abstract: Megakaryocytes (MK) generate platelets. Recently, we and others, have reported MK also regulate hematopoietic stem cells (HSC). Here we show high ploidy large cytoplasmic megakaryocytes (LCM) are critical negative regulators of HSC and critical for platelet formation. Using a mouse knockout model ( Pf4-Srsf3 Δ/Δ ) with normal MK numbers, but essentially devoid of LCM, we demonstrate a pronounced increase in BM HSC concurrent with endogenous mobilization and extramedullary hematopoiesis. Severe thrombocytopenia is observed in animals with diminished LCM, although there is no change in MK ploidy distribution, uncoupling endoreduplication and platelet production. When HSC isolated from a microenvironment essentially devoid of LCM reconstitute hematopoiesis in lethally irradiated mice, the absence of LCM increases HSC in BM, blood and spleen, and the recapitulation of thrombocytopenia. In contrast, following a competitive transplant using minimal numbers of WT HSC together with HSC from a microenvironment with diminished LCM, sufficient WT HSC-generated LCM regulates a normal HSC pool and prevents thrombocytopenia. Importantly, LCM are conserved in humans.
Publisher: American Chemical Society (ACS)
Date: 09-01-2020
Abstract: Herein, we demonstrate a method for the functionalization of cubic phase lipid nanoparticles (cubosomes) with a series of magnetite (Fe
Publisher: Elsevier BV
Date: 06-2018
DOI: 10.1016/J.JCIS.2018.02.048
Abstract: The fight against infection in an era of emerging antibiotic resistant bacteria is one of the grandest scientific challenges facing society today. Nano-carriers show great promise in improving the antibacterial activity of antibiotics as they are able to enhance their solubility, provide sustained release and reduce toxic side effects via specifically targeting infection sites. Here, we investigate the antibacterial effect of two lipidic nano-carriers that contain the poorly soluble antibiotic rif icin in their bilayers. One nanoparticle is assembled solely from the lipid monoolein, thus is neutral at physiological pH and the other contains a mixture of monoolein and the cationic lipid N-[1-(2,3-Dioleoyloxy)propyl]-N,N,N-trimethylammonium methyl-sulfate (DOTAP), thus is positively charged. Our results show that rif icin-loaded nanoparticles reduce the minimum inhibitory concentration against Staphylococcus aureus compared to rif icin alone, however this reduction was most pronounced for the positively charged nanoparticles. Fluorescent microscopy revealed binding of all nanoparticles to the bacteria and enhanced binding was observed for the charged nanoparticles. This suggests that the cationic lipids promote electrostatic interactions with the negatively charged bacterial membrane. Förster resonance energy transfer demonstrated that the cationic charged nanoparticles were able to fuse with bacterial membranes whilst atomic force microscopy and transmission electron microscopy revealed structural damage to the bacterial membranes caused by the nanoparticles. Significantly, we identified a concentration window in which the nanoparticles exhibited antibacterial activity while not affecting HeLa and CHO cell viability. This ability to improve the efficacy of antibiotics without affecting their eukaryotic cytotoxicity is of significant importance for future development of nanomedicine based strategies to combat infections.
Publisher: Mary Ann Liebert Inc
Date: 21-11-2013
Publisher: Wiley
Date: 02-04-2009
DOI: 10.1002/JBM.A.32468
Abstract: For tissue engineering and cell therapy applications, expansion of cells such as chondrocytes on beads in spinner culture can provide advantages compared with monolayer culture. The use of resorbable beads that can be included as an integral part of the construct provides the advantage of minimizing the extent of cell handling and eliminating a final trypsin treatment to detach cells from the bead. In this study, we have made various types of beads based on native collagen and denatured collagen (gelatin). The beads have been stabilized by different extents of glutaraldehyde cross-linking, and characterized by a combination of chemical analysis, thermal stability, and microscopy. In vitro examination in the presence and absence of chondrocytes showed that stability increased with the extent of crosslinking and could also be influenced by the manner of fabrication. On the basis of the in vitro stability studies, gelatin beads of a defined stability were shown to resorb over time in subcutaneous implants in nude mice compared with more stable demineralized bone particle (DMB) carriers. These data indicate that for direct use in tissue engineering or cell therapy applications, where resorbable beads can be used for cell expansion and then direct delivery of cells, it is possible to design suitable carrier beads with a range of stabilities that match the implant requirements.
Publisher: Elsevier BV
Date: 07-2021
Publisher: Mary Ann Liebert Inc
Date: 2013
Location: Australia
No related grants have been discovered for Jacinta White.