ORCID Profile
0000-0002-5509-7925
Current Organisation
University of Oxford
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Optica Publishing Group
Date: 11-04-2023
DOI: 10.1364/AO.472996
Abstract: This paper demonstrates the application of polarized-depolarized Rayleigh scattering (PDRS) as a simultaneous mixture fraction and temperature diagnostic for non-reacting gaseous mixtures. Previous implementations of this technique have been beneficial when used for combustion and reacting flow applications. This work sought to extend its applicability to non-isothermal mixing of different gases. The use of PDRS shows promise in a range of applications outside combustion, such as in aerodynamic cooling technologies and turbulent heat transfer studies. The general procedure and requirements for applying this diagnostic are elaborated using a proof-of-concept experiment involving gas jet mixing. A numerical sensitivity analysis is then presented, providing insight into the applicability of this technique using different gas combinations and the likely measurement uncertainty. This work demonstrates that appreciable signal-to-noise ratios can be obtained from this diagnostic in gaseous mixtures, yielding simultaneous temperature and mixture fraction visualization, even for an optically non-optimal selection of mixing species.
Publisher: Wiley
Date: 14-10-2019
Publisher: Optica Publishing Group
Date: 02-02-2023
DOI: 10.1364/OE.482477
Abstract: Laser-induced grating spectroscopy (LIGS) is an optical diagnostic technique for gas-phase thermometry in challenging environments where physical probes are undesirable. The Portable In-line LIGS for Optical Thermometry (PILOT) instrument is a novel self-contained, compact device capable of tracer-free LIGS measurements at 400 Hz. It can be mounted in any orientation and includes internal alignment capability, adjustable path length matching for the pump beams, and an energy ower attenuation mechanism for the pump robe beams. Characterization of the instrument demonstrated that it can produce accurate ( .37% in ambient air) and precise (±0.7% in ambient air) spatially- and temporally-resolved temperature measurements, and is now ready to be deployed in research facilities.
Publisher: Optica Publishing Group
Date: 17-05-2021
DOI: 10.1364/AO.419973
Abstract: Optical diagnostics of gas-phase pressure are relatively unusual. In this work, we demonstrate a novel, rapid, and robust method to use laser-induced grating scattering (LIGS) to derive this property in real time. Previous pressure measurements with LIGS have employed a signal fitting method, but this is relatively time-consuming and requires specialist understanding. In this paper, we directly measure a decay lifetime from a LIGS signal and then employ a calibration surface constructed using a physics-based model to convert this value to pressure. This method was applied to an optically accessible single-cylinder internal combustion engine, yielding an accuracy of better than 10% at all tested conditions above atmospheric pressure. This new approach complements the existing strength of LIGS in precisely and accurately deriving temperature with a simple analysis method, by adding pressure information with a similarly simple method.
Publisher: Springer Science and Business Media LLC
Date: 12-05-2020
DOI: 10.1007/S10494-020-00140-2
Abstract: This paper presents a comparison of experimental and numerical results for a series of turbulent reacting jets where silica nanoparticles are formed and grow due to surface growth and agglomeration. We use large-eddy simulation coupled with a multiple mapping conditioning approach for the solution of the transport equation for the joint probability density function of scalar composition and particulate size distribution. The model considers inception based on finite-rate chemistry, volumetric surface growth and agglomeration. The sub-models adopted for these particulate processes are the standard ones used by the community. Validation follows the “paradigm shift” approach where elastic light scattering signals (that depend on particulate number and size), OH- and SiO-LIF signals are computed from the simulation results and compared with “raw signals” from laser diagnostics. The sensitivity towards variable boundary conditions such as co-flow temperature, Reynolds number and precursor doping of the jet is investigated. Agreement between simulation and experiments is very good for a reference case which is used to calibrate the signals. While keeping the model parameters constant, the sensitivity of the particulate size distribution on co-flow temperature is predicted satisfactorily upstream although quantitative differences with the data exist downstream for the lowest coflow temperature case that is considered. When the precursor concentration is varied, the model predicts the correct direction of the change in signal but notable qualitative and quantitative differences with the data are observed. In particular, the measured signals show a highly non-linear variation while the predictions exhibit a square dependence on precursor doping at best. So, while the results for the reference case appear to be very good, shortcomings in the standard submodels are revealed through variation of the boundary conditions. This demonstrates the importance of testing complex nanoparticle synthesis models on a flame series to ensure that the physical trends are correctly accounted for.
Publisher: Elsevier BV
Date: 2019
Location: United Kingdom of Great Britain and Northern Ireland
No related grants have been discovered for Benjamin A O Williams.