ORCID Profile
0000-0002-9795-9888
Current Organisation
Centre National de la Recherche Scientifique
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Royal Society of Chemistry (RSC)
Date: 2011
DOI: 10.1039/C0LC00203H
Abstract: Environmental air monitoring is of great interest due to the large number of people concerned and exposed to different possible risks. From the most common particles in our environment (e.g. by-products of combustion or pollens) to more specific and dangerous agents (e.g. pathogenic micro-organisms), there are a large range of particles that need to be controlled. In this article we propose an original study on the collection of electrostatically deposited particles using electrowetting droplet displacement. A variety of particles were studied, from synthetic particles (e.g. Polystyrene Latex (PSL) microsphere) to different classes of biological particle (proteins, bacterial spores and a viral simulant). Furthermore, we have compared ElectroWetting-On-Dielectric (EWOD) collecting efficiency using either a hydrophobic or a superhydrophobic counter electrode. We observe different cleaning efficiencies, depending on the hydrophobicity of the substrate (varying from 45% to 99%). Superhydrophobic surfaces show the best cleaning efficiency with water droplets for all investigated particles (MS2 bacteriophage, BG (Bacillus atrophaeus) spores, OA (ovalbumin) proteins, and PSL).
Publisher: American Chemical Society (ACS)
Date: 24-10-2013
DOI: 10.1021/LA4026848
Abstract: Usually, electrowetting on superhydrophobic surfaces (EWOSS) is generated by application of an alternating current signal and often leads to droplet impalement into the structuration. To avoid this phenomenon, superhydrophobic surfaces must show robustness to high pressure. Otherwise, an external energy has to be applied to dewet the droplet from the structuration. We present, in this article, an original approach to actuate liquid droplets via a modulated EWOSS signal (MEWOSS). This technique allows the dewetting of the droplet due to periodic vibrations induced by the electrowetting actuation. In that case, it is possible to investigate a larger range of superhydrophobic surfaces under EWOSS without droplet impalement. Three different superhydrophobic surfaces, showing different degrees of impalement under EWOSS, are investigated and compared using this MEWOSS technique.
Publisher: American Chemical Society (ACS)
Date: 03-02-2009
DOI: 10.1021/LA900144D
Publisher: Elsevier BV
Date: 03-2022
DOI: 10.1016/J.CHEMOSPHERE.2021.132928
Abstract: Drug efficiency can be considerably boosted while adverse effects can be reduced by precisely monitoring the concentration of anti-cancer drugs. Thus, one of the most important parameters for human health is the monitoring and detection of anticancer drugs during chemotherapy treatment. Herein, a glassy carbon electrode (GCE) was modified by Pt- and Pd-incorporated ZnO nanoparticles-decorated single-wall carbon nanotubes (Pt-Pd-ZnO/SWCNTs) nanocomposites, and ds-DNA (Calf Thymus) that was a biological recognition element, and it was aimed to be utilized as an ultrasensitive and effective electroanalytical biosensor for idarubicin (IDR) monitoring. Various physicochemical characterization techniques including transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM) with energy-dispersive X-ray spectroscopy (EDS) were used to investigate the morphology and structure of the Pt-Pd-ZnO/SWCNTs nanocomposite, which was produced via straightforward chemical precipitation combined with the one-pot method. The layer-by-layer modification technique was implemented to fabricate the ds-DNA/Pt-Pd-ZnO/SWCNTs/GCE to be further utilized as a voltammetric sensor for sensitive monitoring of idarubicin in biological fluids and pharmaceutical substances. The electroanalytical method implemented to detect idarubicin was based to detect the ds-DNA's guanine base signal on the surface of the modified electrode in the absence and presence of the anticancer drug. The results explicated that the developed biosensor performed well in determining idarubicin in concentrations ranging from 1.0 nM to 65 μM, with a detection limit of 0.8 nM. The idarubicin detection ability of the modified electrode in real s les was evaluated, and the recovery data was acquired in the range of 98.0% and 104.75%. In the final step, the preferential intercalative binding mode of idarubicin drug with ds-DNA was approved by molecular docking study. This study paves the way for engineering highly sensitive DNA biosensors to be employed in the monitoring of anticancer drugs by combining the benefits of nanocomposites and valuable information of a molecular docking study.
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C5TA05730B
Abstract: Reduced graphene oxide nanosheets decorated with gold–palladium bimetallic nanoparticles are synthesized by a simple solution chemistry approach for efficient electrochemical hydrogen generation.
Publisher: American Chemical Society (ACS)
Date: 27-08-2008
DOI: 10.1021/LA801268V
Abstract: The paper reports on the comparison of the wetting properties of superhydrophobic silicon nanowires (NWs), using drop impact impalement and electrowetting (EW) experiments. A correlation between the resistance to impalement on both EW and drop impact is shown. From the results, it is evident that when increasing the length and density of NWs (i) the thresholds for drop impact and EW irreversibility increase and (ii) the contact-angle hysteresis after impalement decreases. This suggests that the structure of the NW network could allow for partial impalement, hence preserving the reversibility, and that EW acts the same way as an external pressure. The most robust of our surfaces shows a threshold to impalement higher than 35 kPa, while most of the superhydrophobic surfaces tested so far have impalement thresholds smaller than 10 kPa.
Publisher: Royal Society of Chemistry (RSC)
Date: 2014
DOI: 10.1039/C4LC00650J
Abstract: How to take advantage of superhydrophobic microgrids to address the problem of coupling continuous to digital microfluidic systems? A reconfigurable capillary connection for digital microfluidic devices is presented.
Publisher: Springer Science and Business Media LLC
Date: 20-09-2016
Publisher: Springer Science and Business Media LLC
Date: 15-02-2013
Publisher: American Chemical Society (ACS)
Date: 29-04-2009
DOI: 10.1021/LA803756F
Abstract: The paper reports on wetting, electrowetting (EW), and systematic contact angle hysteresis measurements after electrowetting of superhydrophobic silicon nanowire surfaces (NWs). The surfaces consist of C4F8-coated silicon nanowires grown on Si/SiO2 substrate. Different surfaces modulating (i) the dielectric layer thickness and (ii) the nanotexturation were investigated in this study. It was found that the superhydrophobic NWs display different EW behaviors according to their double nanotexturation with varying droplet impalement levels. Some surfaces exhibited a total reversibility to EW with no impalement (contact angle variation of 35+/-2 degrees at 190 VTRMS with deionized water), whereas other surfaces showed nonreversible behavior to EW with partial droplet impalement. A scenario is proposed to explain the unique properties of these surfaces.
Publisher: IEEE
Date: 2013
Publisher: Royal Society of Chemistry (RSC)
Date: 2010
DOI: 10.1039/B925544C
Abstract: The reversible actuation of droplets on superhydrophobic surfaces under ambient conditions is currently an important field of research due to its potential applicability in microfluidic lab-on-a-chip devices. We have recently shown that Si-nanowire (NW) surfaces allow for reversible actuation provided that the surface structures show certain characteristics. In particular it appears that, for such surfaces, the presence of structures with multiple specific length scales is indeed needed to have a robust reversibility of contact angle changes. Here we report on electrowetting (EW) and impalement experiments on double-scale structured surfaces prepared by a combination of silicon micropillars prepared by an association of optical lithography and silicon etching, and nanowire growth on top of these surfaces. We show that while micropillar surfaces have a low impalement threshold and irreversible EW behaviour, a surface with double-scale texture can show both a very high resistance to impalement and a limited reversibility under EW, provided that the roughness of the micro-scale is large enough--i.e. that the pillars are tall enough. The optimal performance is obtained for a space between pillars that is comparable to the height of the nanostructure.
No related grants have been discovered for Rabah Boukherroub.