ORCID Profile
0000-0002-0393-9166
Current Organisations
University of Bristol
,
University of Bristol School of Cellular and Molecular Medicine
,
Australian National University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Wiley
Date: 07-05-2021
DOI: 10.1002/JBM.A.37206
Abstract: Glial cell alignment in tissue engineered constructs is essential for achieving functional outcomes in neural recovery. While gelatin methacrylate (GelMA) hydrogel offers superior biocompatibility along with permissive structure and tailorable mechanical properties, phosphate glass fibers (PGFs) can provide physical cues for directionality of neural growth. Aligned PGFs were fabricated by a melt quenching and fiber drawing method and utilized with synthesized GelMA hydrogel. The mechanical properties of GelMA and biocompatibility of the GelMA‐PGFs composite were investigated in vitro using rat glial cells. GelMA with 86% methacrylation degree were photo‐crosslinked using 0.1%wt photo‐initiator (PI). Photocrosslinking under UV exposure for 60 s was used to produce hydrogels (GelMA‐60). PGFs were introduced into the GelMA before crosslinking. Storage modulus and loss modulus of GelMA‐60 was 24.73 ± 2.52 and 1.08 ± 0.23 kN/m 2 , respectively. Increased cell alignment was observed in GelMA‐PGFs compared with GelMA hydrogel alone. These findings suggest GelMA‐PGFs can provide glial cells with physical cues necessary to achieve cell alignment. This approach could further be used to achieve glial cell alignment in bioengineered constructs designed to bridge damaged nerve tissue.
Publisher: Elsevier BV
Date: 05-2012
Publisher: Wiley
Date: 28-05-2020
Publisher: American Chemical Society (ACS)
Date: 02-03-2020
Abstract: Nanomaterials combined with phototherapy and multimodal imaging are promising for cancer theranostics. Our aim is to develop fluorescent mesoporous bioglass nanoparticles (fBGn) based on carbon dots (CD) with delivery, triple-mode imaging, and photothermal (PTT) properties for cancer theranostics. A direct and label-free approach was used to prepare multicolor fluorescent fBGn with 3-aminopropyl triethoxysilane as the surface-functionalizing agent. The calcination at 400 °C provided fBGn with high fluorescence intensity originating from the CD. In particular, a triple-mode emission [fluorescence imaging, two-photon (TP), and Raman imaging] was observed which depended on CD nature and surface properties such as surface oxidation edge state, amorphous region, nitrogen passivation of surface state, and crystalline region. The fBGn also exhibited phototherapeutic properties such as photodynamic (PDT) and PTT effects. The antitumor effect of the combined PDT/PTT therapy was significantly higher than that of in idual (PDT or PTT) therapy. The fBGn, due to the mesoporous structure, the anticancer drug doxorubicin could be loaded and released in a pH-dependent way to show chemotherapy effects on cancer cells. The in vivo imaging and biocompatibility of fBGn were also demonstrated in a nude mouse model. The fBGn, with the combined capacity of anticancer delivery, triple-mode imaging, and PTT/PDT therapy, are considered to be potentially useful for cancer theranostics.
Publisher: American Chemical Society (ACS)
Date: 06-09-2016
Abstract: Biocompatible nanomaterials that allow for labeling cells and tissues with the capacity to load and deliver drug molecules hold great promise for the therapeutic-diagnostic purposes in tissue repair and disease cure. Here a novel nanoplatform, called C-dot bioactive organosilica nanosphere (C-BON), is introduced to have excellent theranostic potential, such as controlled drug delivery, visible-light imaging, and NIR photothermal activity. C-dots with a few nanometers were in situ generated in the Ca-containing organosilica mesoporous nanospheres through the sol-gel and thermal-treatment processes. The C-BON exhibited multicolor luminescence over a wide visible-light range with strong emissions and high photostability over time and against acidity and the possible in vivo optical imaging capacity when injected in rat subcutaneous tissues. Moreover, the C-BON showed a photothermal heating effect upon the irradiation of near-infrared. The C-BON, thanks to the high mesoporosity and existence of Ca(2+) ions, demonstrated excellent loading capacity of anticancer drug doxorubicin (as high as 90% of carrier weight) and long-term (over a couple of weeks) and pH/NIR-dependent release ability. The C-BON preserved the compositional merit of Ca-Si glass, having excellent bioactivity and cell compatibility in vitro. Taken all, the multifunctional properties of C-BON-multicolor luminescence, photothermal activity, and high drug loading and controlled release-together with its excellent bioactivity and cell compatibility potentiate the future applications in theranostics (chemotherapy and photothermal therapy with optical imaging).
Publisher: Elsevier
Date: 2022
Publisher: Elsevier BV
Date: 02-2022
Publisher: SAGE Publications
Date: 2020
Abstract: For skeletal muscle engineering, scaffolds that can stimulate myogenic differentiation of cells while possessing suitable mechanical properties (e.g. flexibility) are required. In particular, the elastic property of scaffolds is of importance which helps to resist and support the dynamic conditions of muscle tissue environment. Here, we developed highly flexible nanocomposite nanofibrous scaffolds made of polycarbonate diol and isosorbide-based polyurethane and hydrophilic nano-graphene oxide added at concentrations up to 8%. The nano-graphene oxide incorporation increased the hydrophilicity, elasticity, and stress relaxation capacity of the polyurethane-derived nanofibrous scaffolds. When cultured with C2C12 cells, the polyurethane–nano-graphene oxide nanofibers enhanced the initial adhesion and spreading of cells and further the proliferation. Furthermore, the polyurethane–nano-graphene oxide scaffolds significantly up-regulated the myogenic mRNA levels and myosin heavy chain expression. Of note, the cells on the flexible polyurethane–nano-graphene oxide nanofibrous scaffolds could be mechanically stretched to experience dynamic tensional force. Under the dynamic force condition, the cells expressed significantly higher myogenic differentiation markers at both gene and protein levels and exhibited more aligned myotubular formation. The currently developed polyurethane–nano-graphene oxide nanofibrous scaffolds, due to their nanofibrous morphology and high mechanical flexibility, along with the stimulating capacity for myogenic differentiation, are considered to be a potential matrix for future skeletal muscle engineering.
Publisher: Elsevier BV
Date: 03-2014
DOI: 10.1016/J.ACTBIO.2013.11.002
Abstract: Three-dimensional (3-D) open-channeled scaffolds of biopolymers are a promising candidate matrix for tissue engineering. When scaffolds have the capacity to deliver bioactive molecules the potential for tissue regeneration should be greatly enhanced. In order to improve drug-delivery capacity, we exploit 3-D poly(lactic acid) (PLA) scaffolds by creating microporosity within the scaffold network. Macroporous channeled PLA with a controlled pore configuration was obtained by a robotic dispensing technique. In particular, a room temperature ionic liquid (RTIL) bearing hydrophilic counter-anions, such as OTf and Cl, was introduced to the biopolymer solution at varying ratios. The RTIL-biopolymer slurry was homogenized by ultrasonication, and then solidified through the robotic dispensing process, during which the biopolymer and RTIL formed a bicontinuous interpenetrating network. After ethanol wash-out treatment the RTIL was completely removed to leave highly microporous open channels throughout the PLA network. The resultant pore size was observed to be a few micrometers (average 2.43 μm) and microporosity was determined to be ∼ 70%. The microporous surface was also shown to favor initial cell adhesion, stimulating cell anchorage on the microporous structure. Furthermore, in vivo tissue responses assessed in rat subcutaneous tissue revealed good tissue compatibility, with minimal inflammatory reactions, while gathering a larger population of fibroblastic cells than the non-microporous scaffolds, and even facilitating invasion of the cells within the microporous structure. The efficacy of the micropore networks generated within the 3-D scaffolds in loading and releasing therapeutic molecules was addressed using antibiotic sodium icillin and protein cytochrome C as model drugs. The microporous scaffolds exhibited significantly enhanced drug loading capacity: 4-5 times increase in icillin and 9-10 times increase in cytochrome C compared to the non-microporous scaffolds. The release of icillin loaded within the microporous scaffolds was initially fast (∼ 85% for 1 week), and was then slowed down, showing a continual release up to a month. On the other hand, cytochrome C was shown to release in a highly sustainable manner over a month, without showing an initial burst release effect. This study provides a novel insight into the generation of 3-D biopolymer scaffolds with high performance in loading and delivery of biomolecules, facilitated by the creation of microporous channels through the scaffold network. The capacity to support tissue cells while in situ delivering drug molecules makes the current scaffolds potentially useful for therapeutic tissue engineering.
Publisher: SAGE Publications
Date: 02-03-2020
Abstract: Government and nongovernmental organizations need national and global estimates on the descriptive epidemiology of common oral conditions for policy planning and evaluation. The aim of this component of the Global Burden of Disease study was to produce estimates on prevalence, incidence, and years lived with disability for oral conditions from 1990 to 2017 by sex, age, and countries. In addition, this study reports the global socioeconomic pattern in burden of oral conditions by the standard World Bank classification of economies as well as the Global Burden of Disease Socio-demographic Index. The findings show that oral conditions remain a substantial population health challenge. Globally, there were 3.5 billion cases (95% uncertainty interval [95% UI], 3.2 to 3.7 billion) of oral conditions, of which 2.3 billion (95% UI, 2.1 to 2.5 billion) had untreated caries in permanent teeth, 796 million (95% UI, 671 to 930 million) had severe periodontitis, 532 million (95% UI, 443 to 622 million) had untreated caries in deciduous teeth, 267 million (95% UI, 235 to 300 million) had total tooth loss, and 139 million (95% UI, 133 to 146 million) had other oral conditions in 2017. Several patterns emerged when the World Bank’s classification of economies and the Socio-demographic Index were used as indicators of economic development. In general, more economically developed countries have the lowest burden of untreated dental caries and severe periodontitis and the highest burden of total tooth loss. The findings offer an opportunity for policy makers to identify successful oral health strategies and strengthen them introduce and monitor different approaches where oral diseases are increasing plan integration of oral health in the agenda for prevention of noncommunicable diseases and estimate the cost of providing universal coverage for dental care.
Publisher: MDPI AG
Date: 10-05-2023
DOI: 10.3390/BIOM13050811
Abstract: Approximately half of an adult human’s body weight is made up of muscles. Thus, restoring the functionality and aesthetics of lost muscle tissue is critical. The body is usually able to repair minor muscle injuries. However, when volumetric muscle loss occurs due to tumour extraction, for instance, the body will form fibrous tissue instead. Gelatin methacryloyl (GelMA) hydrogels have been applied for drug delivery, tissue adhesive, and various tissue engineering applications due to their tuneable mechanical properties. Here, we have synthesised GelMA from different gelatin sources (i.e., porcine, bovine, and fish) with varying bloom numbers, which refers to the gel strength, and investigated for the influence of the source of gelatin and the bloom number on biological activities and mechanical properties. The results indicated that the source of the gelatin and variable bloom numbers have an impact on GelMA hydrogel properties. Furthermore, our findings established that the bovine-derived gelatin methacryloyl (B-GelMA) has better mechanical properties than the other varieties composed of porcine and fish with 60 kPa, 40 kPa, and 10 kPa in bovine, porcine, and fish, respectively. Additionally, it showed a noticeably greater swelling ratio (SR) ~1100% and a reduced rate of degradation, improving the stability of hydrogels and giving cells adequate time to ide and proliferate to compensate for muscle loss. Furthermore, the bloom number of gelatin was also proven to influence the mechanical properties of GelMA. Interestingly, although GelMA made of fish had the lowest mechanical strength and gel stability, it demonstrated excellent biological properties. Overall, the results emphasise the importance of gelatin source and bloom number, allowing GelMA hydrogels to have a wide range of mechanical and excellent biological properties and making them suitable for various muscle tissue regeneration applications.
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C4RA12640H
Abstract: Novel magnetic nanocomposite injectables made of calcium phosphate cements and magnetite nanoparticles demonstrated excellent physico-chemical and biological properties effective for bone regeneration.
Publisher: Elsevier BV
Date: 05-2020
Publisher: American Chemical Society (ACS)
Date: 04-11-2014
DOI: 10.1021/AM505759P
Abstract: Exploring the biological interfaces of metallic implants has been an important issue in achieving biofunctional success. Here we develop a biointerface with nanotopological features and bioactive composition, comprising a carbon nanotube (CNT) and chitosan (Chi) hybrid, via an electrophoretic deposition (EPD). The physicochemical properties, in vitro biocompatibility, and protein delivering capacity of the decorated nanohybrid layer were investigated, to address its potential usefulness as bone regenerating implants. Over a wide compositional range, the nanostructured hybrid interfaces were successfully formed with varying thicknesses, depending on the electrodeposition parameters. CNT-Chi hybrid interfaces showed a time-sequenced degradation in saline water, and a rapid induction of hydroxyapatite mineral in a simulated body fluid. The nanostructured hybrid substrates stimulated the initial adhesion events of the osteoblastic cells, including cell adhesion rate, spreading behaviors, and expression of adhesive proteins. The nanostructured hybrid interfaces significantly improved the adsorption of protein molecules, which was enabled by the surface charge interaction, and increased surface area of the nanotopology. Furthermore, the incorporated protein was released at a highly sustained rate, profiling a diffusion-controlled pattern over a couple of weeks, suggesting the possible usefulness as a protein delivery device. Collectively, the nanostructured hybrid CNT-Chi layer, implemented by an electrodeposition, is considered a biocompatible, cell-stimulating, and protein-delivering biointerface of metallic implants.
Publisher: MDPI AG
Date: 29-10-2021
Abstract: Reactive oxygen species (ROS) are continuously produced by skeletal muscle during contractile activity and even at rest. However, the ROS generated from excessive exercise or traumatic damage may produce more ROS than can be neutralized by an antioxidant capacity, which can be harmful to muscle function. In particular, selenium is a known antioxidant that regulates physiological functions such as cell differentiation and anti-inflammatory function. In this study, we developed nano-sized antioxidative biomaterials using selenium to investigate the protective and differentiation effects against C2C12 myoblasts in an H2O2-induced oxidative stress environment. The selenium nanoparticles (SeNPs) were produced with a size of 35.6 ± 4.3 nm and showed antioxidant effects according to the 3,3′,5,5′-tetramethylbenzidine assay. Then, SeNPs were treated to C2C12 cells with or without H2O2. Our results showed that SeNPs reduced C2C12 apoptosis and intracellular ROS levels. Additionally, SeNPs effectively up-regulated in the presence of H2O2, MyoD, MyoG, α-actinin, and myosin heavy chain, which are well known to increase during myoblast differentiation as assayed by qRT-PCR, immunocytochemistry-staining, western blotting. These results demonstrate that SeNPs can accelerate differentiation with its protective effects from the ROS environment and can be applied to the treatment of skeletal muscle in a cellular redox environment.
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C8MH00966J
Abstract: Carbon-based nanomaterials emerge as promising platforms for theranostic applications in disease treatment and tissue repair.
Publisher: Elsevier BV
Date: 03-2014
Publisher: IOP Publishing
Date: 16-12-2020
Publisher: Royal Society of Chemistry (RSC)
Date: 2023
DOI: 10.1039/D3TB00905J
Abstract: Nanomaterial composition, morphology, and mechanical performance are critical parameters for tissue engineering.
Publisher: American Chemical Society (ACS)
Date: 12-12-2018
Abstract: In the field of nanomedicine, drug-loaded nanocarriers that integrate nanotechnology and chemotherapeutics are widely used to achieve synergistic therapeutic effects. Here, we prepared mesoporous silica nanoparticles capped with cerium oxide nanoparticles (COP@MSN) wherein a pH trigger-responsive mechanism was used to control drug release and intracellular drug delivery. We blocked the mesopores of the carboxyl-functionalized MSN with aminated COP. These pores could be opened in acidic conditions to release the loaded drug, thus establishing a pH-responsive drug release system. We loaded doxorubicin (DOX) as anticancer biomolecule into the pores of MSN and capped with COP. The COP@DOX-MSN system showed a typical drug release profile in an acidic medium, which, however, was not observed in a neutral medium. In vitro studies using cancer cell line (HeLa) proved that the COP@DOX-MSN entered efficiently into HeLa cells and released DOX to the level sufficient for cytotoxicity. The cytotoxic effect of COP in cancer cells was facilitated by the pro-oxidant property of COPs, which considerably raised the reactive oxygen species (ROS) level, thereby leading to cellular apoptosis. The combination of DOX with COP (COP@DOX-MSN) showed even higher ROS level, demonstrating a cytotoxic synergism of drug and nanoparticle in terms of ROS generation. Collectively, the COP@DOX-MSN is considered useful for cancer treatment with the combined capacity of pH-controlled drug delivery, chemotherapeutics, and redox activity.
Publisher: Elsevier BV
Date: 06-2017
DOI: 10.1016/J.ACTBIO.2017.03.054
Abstract: Multifunctional nanocarrier-based theranostics is currently considered to solve some key unmet challenges in cancer treatment. Here we report a nanocarrier platform, named carbon dot (CD) created mesoporous hollow organosilica (C-hMOS) nanoparticles, to deliver anticancer drug and to enable optical imaging. The hollow structure was formed by the removal of a nanorod core template, and at the same time, the fluorescent signal was endowed from the heat-treated organosilica network. Thanks to the hollow and mesoporous structure, the C-hMOS effectively loaded doxorubicin (DOX) for cancer chemotherapy. The DOX was released from C-hMOS highly sustainably (over 12days) and pH-dependently (pH 5.0 >pH 7.4). The DOX-loading C-hMOS internalized cancer cells efficiently (>90%), and induced cellular apoptosis including the expression of caspase-3. The treatment of C-hMOS to cancer cells enabled multi-color visualization in vitro, suggesting the possibility of cell tracing. Moreover, when injected intratumorally in mice, the C-hMOS exhibited strong optical signals in vivo along with a high optical stability (over a week). The injected C-hMOS were distributed only a fraction in liver but not in heart, lung, spleen or kidney and displayed good biocompatibility. The DOX-delivering C-hMOS significantly suppressed the in vivo tumor growth associated with apoptotic functions. Taken together, the developed C-hMOS nanoparticles can be a promising nanoplatform for drug delivery and in vivo imaging in cancer treatment. Multifunctional nanoparticles that combine chemotherapeutic ability with imaging modality comprise promising platform for cancer theranostics. Here we developed a novel theranostic nanoparticle, i.e., carbon-dot created mesoporous hollow silica nanoparticle, to offer unique merit for this purpose. The in vitro and in vivo findings to support this include: i) carbon dots with 1-2nm size in situ generated discretely and uniformly within silica network, ii) hollow and mesoporous structure effective for loading of DOX at high content, iii) release behavior of DOX in a sustainable and pH-dependent manner, iv) chemotherapeutic efficacy in killing cancer cells and suppressing tumor growth through DOX delivery, and v) carbon dot induced multi-color fluorescence imaging within cells and tumor tissues. These collective multifaceted properties may facilitate the novel carbon dot nanocarriers to be a potential candidate for delivering anticancer drug and non-invasive imaging in cancer treatment.
Publisher: MDPI AG
Date: 14-07-2020
DOI: 10.3390/NANO10071373
Abstract: Nanomaterials can enhance interactions with stem cells for tissue regeneration. This study aimed to investigate the biological effects of tricalcium silicate nanoparticle-containing cement (Biodentine™) during or after setting on stem cells from human exfoliated deciduous teeth (SHED) to mimic clinically relevant situations in which materials are adapted. Specimens were ided into four groups depending on the start of extraction time (during (3, 6 and 12 min) or after setting (24 h)) and extracted in culture medium for 24 h for further physicochemical and biological analysis. After cell viability in serially diluted extracts was evaluated, odontogenic differentiation on SHED was evaluated by ARS staining using nontoxic conditions. A physicochemical analysis of extracts or specimens indicated different Ca ion content, pH, and surface chemistry among groups, supporting the possibility of different biological functionalities depending on the extraction starting conditions. Compared to the ‘after setting’ group, all ‘during setting’ groups showed cytotoxicity on SHED. The during setting groups induced more odontogenic differentiation at the nontoxic concentrations compared to the control. Thus, under clinically simulated extract conditions at nontoxic concentrations, Biodentine™ seemed to be a promising odontoblast differentiating biomaterial that is helpful for dental tissue regeneration. In addition, to simulate clinical situations when nanoparticle-containing cement is adjusted, biological effects during setting need to be considered.
Publisher: BMJ
Date: 24-04-2020
DOI: 10.1136/INJURYPREV-2019-043494
Abstract: Past research in population health trends has shown that injuries form a substantial burden of population health loss. Regular updates to injury burden assessments are critical. We report Global Burden of Disease (GBD) 2017 Study estimates on morbidity and mortality for all injuries. We reviewed results for injuries from the GBD 2017 study. GBD 2017 measured injury-specific mortality and years of life lost (YLLs) using the Cause of Death Ensemble model. To measure non-fatal injuries, GBD 2017 modelled injury-specific incidence and converted this to prevalence and years lived with disability (YLDs). YLLs and YLDs were summed to calculate disability-adjusted life years (DALYs). In 1990, there were 4 260 493 (4 085 700 to 4 396 138) injury deaths, which increased to 4 484 722 (4 332 010 to 4 585 554) deaths in 2017, while age-standardised mortality decreased from 1079 (1073 to 1086) to 738 (730 to 745) per 100 000. In 1990, there were 354 064 302 (95% uncertainty interval: 338 174 876 to 371 610 802) new cases of injury globally, which increased to 520 710 288 (493 430 247 to 547 988 635) new cases in 2017. During this time, age-standardised incidence decreased non-significantly from 6824 (6534 to 7147) to 6763 (6412 to 7118) per 100 000. Between 1990 and 2017, age-standardised DALYs decreased from 4947 (4655 to 5233) per 100 000 to 3267 (3058 to 3505). Injuries are an important cause of health loss globally, though mortality has declined between 1990 and 2017. Future research in injury burden should focus on prevention in high-burden populations, improving data collection and ensuring access to medical care.
Publisher: Elsevier BV
Date: 04-2018
DOI: 10.1016/J.DENTAL.2018.01.019
Abstract: Although polymethyl methacrylate (PMMA) is widely used as a dental material, a major challenge of using this substance is its poor antimicrobial (anti-adhesion) effects, which increase oral infections. Here, graphene-oxide nanosheets (nGO) were incorporated into PMMA to introduce sustained antimicrobial-adhesive effects by increasing the hydrophilicity of PMMA. After characterizing nGO and nGO-incorporated PMMA (up to 2wt%) in terms of morphology and surface characteristics, 3-point flexural strength and hardness were evaluated. The anti-adhesive effects were determined for 4 different microbial species with experimental specimens and the underlying anti-adhesive mechanism was investigated by a non-thermal oxygen plasma treatment. Sustained antimicrobial-adhesive effects were characterized with incubation in artificial saliva for up to 28 days. The typical nanosheet morphology was observed for nGO. Incorporating nGO into PMMA roughened its surface and increased its hydrophilicity without compromising flexural strength or surface hardness. An anti-adhesive effect after 1h of exposure to microbial species in artificial saliva was observed in nGO-incorporated specimens, which accelerated with increasing levels of nGO without significant cytotoxicity to oral keratinocytes. Plasma treatment of native PMMA demonstrated that the antimicrobial-adhesive effects of nGO incorporation were at least partially due to increased hydrophilicity, not changes in the surface roughness. A sustained antimicrobial-adhesive property against Candida albicans was observed in 2% nGO for up to 28 days. The presence of sustained anti-adhesion properties in nGO-incorporated PMMA without loading any antimicrobial drugs suggests the potential usefulness of this compound as a promising antimicrobial dental material for dentures, orthodontic devices and provisional restorative materials.
Publisher: American Chemical Society (ACS)
Date: 24-11-2015
Abstract: Biocompatible nanostructured surfaces control the cell behaviors and tissue integration process of medical devices and implants. Here we develop a novel biocompatible nanostructured surface based on mesoporous silica nanotube (MSNT) by means of an electrodeposition. MSNTs, replicated from carbon nanotubes of 25 nm × 1200 nm size, were interfaced in combination with fugitive biopolymers (chitosan or collagen) onto a Ti metallic substrate. The MSNT-biopolymer deposits uniformly covered the substrate with weight gains controllable by the electrodeposition conditions. Random nanotubular networks were generated successfully, which alongside the high mesoporosity provided unique nanotopological properties for the cell responses and the loading/delivery of biomolecules. Of note, the adhesion and spreading behaviors of mesenchymal stem cells (MSCs) were significantly altered, revealing more rapid cell anchorage and extensive nanofilopodia development along the nanotubular networks. Furthermore, the nanotubular surface improved the loading capacity of biomolecules (dexamethasone and bovine serum albumin) up to 5-7 times. The release of the biomolecules was highly sustained, exhibiting a diffusion-controlled pattern over 15 days. The therapeutic efficacy of the delivered biomolecules was also confirmed in the osteogenic differentiation of MSCs. While in vivo performance and applicability studies are needed further, the current biocompatible nanostructured surface may be considered as a novel biointerfacing platform to control cellular behaviors and biomolecular delivery.
Publisher: American Chemical Society (ACS)
Date: 13-04-2015
Abstract: Nanoscale scaffolds that characterize high bioactivity and the ability to deliver biomolecules provide a 3D microenvironment that controls and stimulates desired cellular responses and subsequent tissue reaction. Herein novel nanofibrous hybrid scaffolds of polycaprolactone shelled with mesoporous silica (PCL@MS) were developed. In this hybrid system, the silica shell provides an active biointerface, while the 3D nanoscale fibrous structure provides cell-stimulating matrix cues suitable for bone regeneration. The electrospun PCL nanofibers were coated with MS at controlled thicknesses via a sol-gel approach. The MS shell improved surface wettability and ionic reactions, involving substantial formation of bone-like mineral apatite in body-simulated medium. The MS-layered hybrid nanofibers showed a significant improvement in mechanical properties, in terms of both tensile strength and elastic modulus, as well as in nanomechanical surface behavior, which is favorable for hard tissue repair. Attachment, growth, and proliferation of rat mesenchymal stem cells were significantly improved on the hybrid scaffolds, and their osteogenic differentiation and subsequent mineralization were highly up-regulated by the hybrid scaffolds. Furthermore, the mesoporous surface of the hybrid scaffolds enabled the loading of a series of bioactive molecules, including small drugs and proteins at high levels. The release of these molecules was sustainable over a long-term period, indicating the capability of the hybrid scaffolds to deliver therapeutic molecules. Taken together, the multifunctional hybrid nanofibrous scaffolds are considered to be promising therapeutic platforms for stimulating stem cells and for the repair and regeneration of bone.
Publisher: Wiley
Date: 16-08-2016
Publisher: Wiley
Date: 23-03-2012
DOI: 10.1002/JBM.A.34140
Abstract: Magnetic nanoparticles (MNPs) are considered highly useful in therapeutic and diagnostic applications. However, MNPs require surface modification to promote dispersibility in aqueous solutions and thus biocompatibility. In this article, the authors modified MNPs with inorganic silica layer to create silica-coated magnetite nanoparticles (MNP@Si) via sol-gel process. Synthesis involves hydrolysis and condensation steps using tetraethylorthosilicate (TEOS) in methanol/ polyethylene glycol (PEG) solution and ammonia catalyst. Nanoparticles were characterized in terms of morphology, particle size, crystalline phase, chemical-bond structure, surface charge and magnetic properties: in particular, the MNP@Si size was easily tunable through alteration of the Fe(3) O(4) -to-TEOS ratio. As this ratio increased, the MNP@Si size decreased from 270 to 15 nm whilst maintaining core 12-nm MNP particle size, indicating decrease in thickness of the silica coating. All MNP@Si, in direct contrast to uncoated MNPs, showed excellent stability in aqueous solution. The particles' physicochemical and magnetic properties systematically varied with size (coating thickness), and the zeta potential diminished toward negative values, while magnetization increased as the coating thickness decreased. 15-nm MNP@Si showed excellent magnetization (about 64.1 emu/g), almost comparable to that of uncoated MNPs (70.8 emu/g). Preliminary in vitro assays confirmed that the silica layer significantly reduced cellular toxicity as assessed by increase in cell viability and reduction in reactive oxygen species production during 48 h of culture. Newly-developed MNP@Si, with a high capacity for magnetization, water-dispersibility, and diminished cell toxicity, may be potentially useful in erse biomedical applications, including delivery of therapeutic and diagnostic biomolecules.
Publisher: Elsevier BV
Date: 11-2022
Publisher: Elsevier BV
Date: 2019
Publisher: SAGE Publications
Date: 22-11-2016
Abstract: Prehypertension is one of the most common conditions affecting human beings worldwide. It is associated with several complications including hypertension. The blood pressure between normal and hypertension is prehypertension as per the Seventh Report Joint National Committee (JNC-7) classification. The current study was done to measure the magnitude of prehypertension and to study their sociodemographic correlates in the urban field practice area of Kasturba Medical College, Mangalore, India, among 624 people aged ≥20 years. The measurements of blood pressure were done (JNC 7 criteria) with the anthropometric measurements and lifestyle factors. Data analysis was done using Statistical Package for Social Sciences version 16. Adjusted odds ratios were calculated. Overall, 55% subjects had prehypertension and 30% had hypertension. Prehypertension was higher among males. Those from the higher age groups, those from upper socioeconomic status, obese in iduals, and those with lesser physical activity had significantly higher association with prehypertension, and it was least among those who never used tobacco and alcohol.
Publisher: Wiley
Date: 13-09-2021
Abstract: Native extracellular matrix (ECM) exhibits dynamic change in the ligand position. Herein, the ECM‐emulating control and real‐time monitoring of stem cell differentiation are demonstrated by ligand nanoassembly. The density of gold nanoassembly presenting cell‐adhesive Arg‐Gly‐Asp (RGD) ligand on Fe 3 O 4 (magnetite) nanoparticle in nanostructures flexibly grafted to material is changed while keeping macroscale ligand density invariant. The ligand nanoassembly on the Fe 3 O 4 can be magnetically attracted to mediate rising and falling ligand movements via linker stretching and compression, respectively. High ligand nanoassembly density stimulates integrin ligation to activate the mechanosensing‐assisted stem cell differentiation, which is monitored via in situ real‐time electrochemical sensing. Magnetic control of rising and falling ligand movements hinders and promotes the adhesion‐mediated mechanotransduction and differentiation of stem cells, respectively. These rising and falling ligand states yield the difference in the farthest distance (≈34.6 nm) of the RGD from material surface, thereby dynamically mimicking static long and short flexible linkers, which hinder and promote cell adhesion, respectively. Design of cytocompatible ligand nanoassemblies can be made with combinations of dimensions, shapes, and biomimetic ligands for remotely regulating stem cells for offering novel methodologies to advance regenerative therapies.
Publisher: Elsevier BV
Date: 03-2018
DOI: 10.1016/J.ACTBIO.2017.12.026
Abstract: Cell encapsulating hydrogels with tunable mechanical and biological properties are of special importance for cell delivery and tissue engineering. Silk fibroin and collagen, two typical important biological proteins, are considered potential as cell culture hydrogels. However, both have been used in idually, with limited properties (e.g., collagen has poor mechanical properties and cell-mediated shrinkage, and silk fibroin from Bombyx mori (mulberry) lacks cell adhesion motifs). Therefore, the combination of them is considered to achieve improved mechanical and biological properties with respect to in idual hydrogels. Here, we show that the cell-encapsulating hydrogels of mulberry silk fibroin / collagen are implementable over a wide range of compositions, enabled simply by combining the different gelation mechanisms. Not only the gelation reaction but also the structural characteristics, consequently, the mechanical properties and cellular behaviors are accelerated significantly by the silk fibroin / collagen hybrid hydrogel approach. Of note, the mechanical and biological properties are tunable to represent the combined merits of in idual proteins. The shear storage modulus is tailored to range from 0.1 to 20 kPa along the iso-compositional line, which is considered to cover the matrix stiffness of soft-to-hard tissues. In particular, the silk fibroin / collagen hydrogels are highly elastic, exhibiting excellent resistance to permanent deformation under different modes of stress without being collapsed or water-squeezed out (vs. not possible in in idual proteins) - which results from the mechanical synergism of interpenetrating networks of both proteins. Furthermore, the role of collagen protein component in the hybrid hydrogels provides adhesive sites to cells, stimulating anchorage and spreading significantly with respect to mulberry silk fibroin gel, which lacks cell adhesion motifs. The silk fibroin / collagen hydrogels can encapsulate cells while preserving the viability and growth over a long 3D culture period. Our findings demonstrate that the silk / collagen hydrogels possess physical and biological properties tunable and significantly improved (vs. the in idual protein gels), implying their potential uses for cell delivery and tissue engineering. Development of cell encapsulating hydrogels with excellent physical and biological properties is important for the cell delivery and cell-based tissue engineering. Here we communicate for the first time the novel protein composite hydrogels comprised of 'Silk' and 'Collagen' and report their outstanding physical, mechanical and biological properties that are not readily achievable with in idual protein hydrogels. The properties include i) gelation accelerated over a wide range of compositions, ii) stiffness levels covering 0.1 kPa to 20 kPa that mimic those of soft-to-hard tissues, iii) excellent elastic behaviors under various stress modes (bending, twisting, stretching, and compression), iv) high resistance to cell-mediated gel contraction, v) rapid anchorage and spreading of cells, and vi) cell encapsulation ability with a long-term survivability. These results come from the synergism of in idual proteins of alpha-helix and beta-sheet structured networks. We consider the current elastic cell-encapsulating hydrogels of silk-collagen can be potentially useful for the cell delivery and tissue engineering in a wide spectrum of soft-to-hard tissues.
Publisher: Royal Society of Chemistry (RSC)
Date: 2014
DOI: 10.1039/C3TB21156H
Publisher: MDPI AG
Date: 04-09-2020
DOI: 10.3390/NANO10091750
Abstract: Calcium silicate-based bioactive glass has received significant attention for use in various biomedical applications due to its excellent bioactivity and biocompatibility. However, the bioactivity of calcium silicate nanoparticle-incorporated bioactive dental sealer is not much explored. Herein, three commercially available bioactive root canal sealers (Endoseal MTA (EDS), Well-Root ST (WST), and Nishika Canal Sealer BG (NBG)) were compared with a resin-based control sealer (AH Plus (AHP)) in terms of physical, chemical, and biological properties. EDS and NBG showed 200 to 400 nm and 100 to 200 nm nanoparticle incorporation in the SEM image, respectively, and WST and NBG showed mineral deposition in Hank’s balanced salt solution after 28 days. The flowability and film thickness of all products met the ISO 3107 standard. Water contact angle, linear dimensional changes, and calcium and silicate ion release were significantly different among groups. All bioactive root canal sealers released calcium ions, while NBG released ~10 times more silicon ions than the other bioactive root canal sealers. Under the cytocompatible extraction range, NBG showed prominent cytocompatibility, osteogenecity, and angiogenecity compared to other sealers in vitro. These results indicate that calcium silicate nanoparticle incorporation in dental sealers could be a potential strategy for dental periapical tissue regeneration.
Publisher: MDPI AG
Date: 14-07-2021
DOI: 10.3390/BIOM11071028
Abstract: In recent years, multidrug-resistant (MDR) bacteria have increased rapidly, representing a major threat to human health. This problem has created an urgent need to identify alternatives for the treatment of MDR bacteria. The aim of this study was to identify the antibacterial activity of selenium nanoparticles (SeNPs) and selenium nanowires (SeNWs) against MDR bacteria and assess the potential synergistic effects when combined with a conventional antibiotic (linezolid). SeNPs and SeNWs were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), zeta potential, and UV-visible analysis. The antibacterial effects of SeNPs and SeNWs were confirmed by the macro-dilution minimum inhibitory concentration (MIC) test. SeNPs showed MIC values against methicillin-sensitive S. aureus (MSSA), methicillin-resistant S. aureus (MRSA), vancomycin-resistant S. aureus (VRSA), and vancomycin-resistant enterococci (VRE) at concentrations of 20, 80, 320, and μg/mL, respectively. On the other hand, SeNWs showed a MIC value of μg/mL against all tested bacteria. Therefore, MSSA, MRSA, and VRSA were selected for the bacteria to be tested, and SeNPs were selected as the antimicrobial agent for the following experiments. In the time-kill assay, SeNPs at a concentration of 4X MIC (80 and 320 μg/mL) showed bactericidal effects against MSSA and MRSA, respectively. At a concentration of 2X MIC (40 and 160 μg/mL), SeNPs showed bacteriostatic effects against MSSA and bactericidal effects against MRSA, respectively. In the synergy test, SeNPs showed a synergistic effect with linezolid (LZD) through protein degradation against MSSA and MRSA. In conclusion, these results suggest that SeNPs can be candidates for antibacterial substitutes and supplements against MDR bacteria for topical use, such as dressings. However, for use in clinical situations, additional experiments such as toxicity and synergistic mechanism tests of SeNPs are needed.
Publisher: American Chemical Society (ACS)
Date: 06-10-2015
DOI: 10.1021/ACS.LANGMUIR.5B03436
Abstract: The newly developed multifunctional (self-activated fluorescent, mesoporous, and biocompatible) hollow mesoporous silica nanoellipsoids (f-hMS) are potentially useful as a delivery system of drugs for therapeutics and imaging purposes. For the synthesis of f-hMS, self-activated fluorescence hydroxyapatite (fHA) was used as a core template. A mesoporous silica shell was obtained by silica formation and subsequent removal of the fHA core, which resulted in a hollow-cored f-hMS. Although the silica shell provided a highly mesoporous structure, enabling an effective loading of drug molecules, the fluorescent property of fHA was also well-preserved in the f-hMS. Cytochrome c and doxorubicin, used as a model protein and anticancer drug, respectively, were shown to be effectively loaded onto f-hMS and were then released in a sustainable and controllable manner. The f-hMS was effectively taken up by the cells and exhibited fluorescent labeling while preserving excellent cell viability. Overall, the f-hMS nanoreservoir may be useful as a multifunctional carrier system for drug delivery and cell imaging.
Publisher: Springer Science and Business Media LLC
Date: 20-04-2020
DOI: 10.1038/S41591-020-0807-6
Abstract: A double burden of malnutrition occurs when in iduals, household members or communities experience both undernutrition and overweight. Here, we show geospatial estimates of overweight and wasting prevalence among children under 5 years of age in 105 low- and middle-income countries (LMICs) from 2000 to 2017 and aggregate these to policy-relevant administrative units. Wasting decreased overall across LMICs between 2000 and 2017, from 8.4% (62.3 (55.1–70.8) million) to 6.4% (58.3 (47.6–70.7) million), but is predicted to remain above the World Health Organization’s Global Nutrition Target of % in over half of LMICs by 2025. Prevalence of overweight increased from 5.2% (30 (22.8–38.5) million) in 2000 to 6.0% (55.5 (44.8–67.9) million) children aged under 5 years in 2017. Areas most affected by double burden of malnutrition were located in Indonesia, Thailand, southeastern China, Botswana, Cameroon and central Nigeria. Our estimates provide a new perspective to researchers, policy makers and public health agencies in their efforts to address this global childhood syndemic.
Publisher: American Chemical Society (ACS)
Date: 16-03-2017
Abstract: Theranostics based on nanoparticles (NPs) is a promising paradigm in nanomedicine. Mesoporous silica nanoparticle (MSN)-based systems offer unique characteristics to enable multimodal imaging or simultaneous diagnosis and therapy. They include large surface area and volume, tunable pore size, functionalizable surface, and acceptable biological safety. Hybridization with other NPs and chemical modification can further potentiate the multifunctionality of MSN-based systems toward translation. Here, we update the recent progress on MSN-based systems for theranostic purposes. We discuss various synthetic approaches used to construct the theranostic platforms either via intrinsic chemistry or extrinsic combination. These include defect generation in the silica structure, encapsulation of diagnostic NPs within silica, their assembly on the silica surface, and direct conjugation of dye chemicals. Collectively, in vitro and in vivo results demonstrate that multimodal imaging capacities can be integrated with the therapeutic functions of these MSN systems for therapy. With further improvement in bioimaging sensitivity and targeting specificity, the multifunctional MSN-based theranostic systems will find many clinical applications in the near future.
Publisher: Wiley
Date: 31-05-2022
Abstract: Cell adhesion occurs when integrin recognizes and binds to Arg–Gly–Asp (RGD) ligands present in fibronectin. In this work, submolecular ligand size and spacing are tuned via template‐mediated in situ growth of nanoparticles for dynamic macrophage modulation. To tune liganded gold nanoparticle (GNP) size and spacing from 3 to 20 nm, in situ localized assemblies of GNP arrays on nanomagnetite templates are engineered. 3 nm‐spaced ligands stimulate the binding of integrin, which mediates macrophage‐adhesion‐assisted pro‐regenerative polarization as compared to 20 nm‐spaced ligands, which can be dynamically anchored to the substrate for stabilizing integrin binding and facilitating dynamic macrophage adhesion. Increasing the ligand size from 7 to 20 nm only slightly promotes macrophage adhesion, not observed with 13 nm‐sized ligands. Increasing the ligand spacing from 3 to 17 nm significantly hinders macrophage adhesion that induces inflammatory polarization. Submolecular tuning of ligand spacing can dominantly modulate host macrophages.
Publisher: Elsevier BV
Date: 2024
Publisher: Springer Science and Business Media LLC
Date: 20-03-2019
DOI: 10.1038/S41598-019-41381-0
Abstract: Although PMMA-based biomaterials are widely used in clinics, a major hurdle, namely, their poor antimicrobial (i.e., adhesion) properties, remains and can accelerate infections. In this study, carboxylated multiwalled carbon nanotubes (CNTs) were incorporated into poly(methyl methacrylate) (PMMA) to achieve drug-free antimicrobial adhesion properties. After characterizing the mechanical/surface properties, the anti-adhesive effects against 3 different oral microbial species ( Staphylococcus aureus , Streptococcus mutans , and Candida albicans ) were determined for roughened and highly polished surfaces using metabolic activity assays and staining for recognizing adherent cells. Carboxylated multiwalled CNTs were fabricated and incorporated into PMMA. Total fracture work was enhanced for composites containing 1 and 2% CNTs, while other mechanical properties were gradually compromised with the increase in the amount of CNTs incorporated. However, the surface roughness and water contact angle increased with increasing CNT incorporation. Significant anti-adhesive effects (35~95%) against 3 different oral microbial species without cytotoxicity to oral keratinocytes were observed for the 1% CNT group compared to the PMMA control group, which was confirmed by microorganism staining. The anti-adhesive mechanism was revealed as a disconnection of sequential microbe chains. The drug-free antimicrobial adhesion properties observed in the CNT-PMMA composite suggest the potential utility of CNT composites as future antimicrobial biomaterials for preventing microbial-induced complications in clinical settings (i.e., Candidiasis).
Publisher: Royal Society of Chemistry (RSC)
Date: 2012
DOI: 10.1039/C2JM33830K
Publisher: SAGE Publications
Date: 18-06-2021
DOI: 10.1177/08853282211024040
Abstract: The eggshell membrane (ESM) is an abundant resource with innate complex structure and composition provided by nature. With at least 60 million tonnes of hen eggs produced globally per annum, utilisation of this waste resource is highly attractive in positively impacting sustainability worldwide. Given the morphology and mechanical properties of this membrane, it has great potential as a biomaterials for wound dressing. However, to date, no studies have demonstrated nor reported this application. As such, the objective of this investigation was to identify and optimise a reproducible extraction protocol of the ESM and to assess the physical, chemical, mechanical and biological properties of the substrate with a view to use as a wound dressing. ESM s les were isolated by either manual peeling (ESM-strip) or via extraction using acetic acid [ESM-A0.5] or ethylenediaminetetraacetic acid, EDTA [ESM-E0.9]. Energy dispersive X-ray spectroscopy (EDS) confirmed that there were no traces of calcium residues from the extraction process. Fourier transform infrared (FTIR) spectroscopy revealed that the extraction method (acetic acid and EDTA) did not alter the chemical structures of the ESM and also clarified the composition of the fibrous proteins of the ESM. Scanning electron microscopy (SEM) analyses revealed a three-layer composite structure of the ESM: an inner layer as continuous, dense and non-fibrous (limiting membrane), a middle layer with a network of fibres (inner shell membrane) and the outer layer (outer shell membrane) of larger fibres. Material properties including optical transparency, porosity, fluid absorption/uptake, thermal stability, mechanical profiling of the ESM s les were performed and demonstrated suitable profiles for translational applications. Biological in vitro studies using SV40 immortalised corneal epithelial cells (ihCEC) and corneal mesenchymal stromal cells (C-MSC) demonstrated excellent biocompatibility. Taken together, these results document the development of a novel sustainable biomaterial that may be used for ophthalmic wounds and/or other biomedical therapies.
Publisher: Wiley
Date: 24-07-2014
DOI: 10.1111/JACE.13075
Publisher: Elsevier BV
Date: 12-2019
Publisher: Elsevier BV
Date: 06-2020
Publisher: Elsevier BV
Date: 06-2023
Publisher: American Chemical Society (ACS)
Date: 04-10-2016
Abstract: Providing an osteogenic stimulatory environment is a key strategy to construct stem cell-based bone-equivalent tissues. Here we design a stem cell delivering gel matrix made of collagen (Col) with bioactive glass nanocarriers (BGn) that incorporate osteogenic signaling molecule, fibroblast growth factor 18 (FGF18), a reservoir considered to cultivate and promote osteogenesis of mesenchymal stem cells (MSCs). The presence of BGn in the gel was shown to enhance the osteogenic differentiation of MSCs, possibly due to the therapeutic role of ions released. The mesoporous nature of BGn was effective in loading FGF18 at large quantity, and the FGF18 release from the BGn-Col gel matrix was highly sustainable with almost a zero-order kinetics, over 4 weeks as confirmed by the green fluorescence protein signal change. The released FGF18 was effective in accelerating osteogenesis (alkaline phosphatase activity and bone related gene expressions) and bone matrix formation (osteopontin, bone sialoprotein, and osteocalcin production) of MSCs. This was attributed to the bone morphogenetic protein (BMP) signaling pathway, where the FGF18 release stimulated the endogenous secretion of BMP2 and the downstream signal Smad1/5/8. Taken together, the FGF18-BGn/Col gel is considered an excellent osteopromoting depot to support and signal MSCs for bone tissue engineering.
Publisher: Elsevier BV
Date: 10-2022
DOI: 10.1016/J.BIOMATERIALS.2022.121792
Abstract: Cell reprogramming can satisfy the demands of obtaining specific cell types for applications such as tissue regeneration and disease modeling. Here we report the reprogramming of human fibroblasts to produce chemically-induced osteogenic cells (ciOG), and explore the potential uses of ciOG in bone repair and disease treatment. A chemical cocktail of RepSox, forskolin, and phenamil was used for osteogenic induction of fibroblasts by activation of RUNX2 expression. Following a maturation, the cells differentiated toward an osteoblast phenotype that produced mineralized nodules. Bulk and single-cell RNA sequencing identified a distinct ciOG population. ciOG formed mineralized tissue in an ectopic site of immunodeficiency mice, unlike the original fibroblasts. Osteogenic reprogramming was modulated under engineered culture substrates. When generated on a nanofiber substrate ciOG accelerated bone matrix formation in a calvarial defect, indicating that the engineered biomaterial promotes the osteogenic capacity of ciOG in vivo. Furthermore, the ciOG platform recapitulated the genetic bone diseases Proteus syndrome and osteogenesis imperfecta, allowing candidate drug testing. The reprogramming of human fibroblasts into osteogenic cells with a chemical cocktail thus provides a source of specialized cells for use in bone tissue engineering and disease modeling.
Publisher: Wiley
Date: 18-06-2021
Abstract: Developing materials with the capability of changing their innate features can help to unravel direct interactions between cells and ligand‐displaying features. This study demonstrates the grafting of magnetic nanohelices displaying cell‐adhesive Arg‐Gly‐Asp (RGD) ligand partly to a material surface. These enable nanoscale control of rapid winding (“W”) and unwinding (“UW”) of their nongrafted portion, such as directional changes in nanohelix unwinding (lower, middle, and upper directions) by changing the position of a permanent magnet while keeping the ligand‐conjugated nanohelix surface area constant. The unwinding (“UW”) setting cytocompatibility facilitates direct integrin recruitment onto the ligand‐conjugated nanohelix to mediate the development of paxillin adhesion assemblies of macrophages that stimulate M2 polarization using glass and silicon substrates for in vitro and in vivo settings, respectively, at a single cell level. Real time and in vivo imaging are demonstrated that nanohelices exhibit reversible unwinding, winding, and unwinding settings, which modulate time‐resolved adhesion and polarization of macrophages. It is envisaged that this remote, reversible, and cytocompatible control can help to elucidate molecular‐level cell–material interactions that modulate regenerative/anti‐inflammatory immune responses to implants.
Publisher: Elsevier
Date: 2021
Publisher: Elsevier BV
Date: 03-2014
DOI: 10.1016/J.ACTBIO.2013.10.028
Abstract: Development of biocompatible and multifunctional nanocarriers is important for the therapeutic efficacy of drug molecules in the treatment of disease and tissue repair. A novel nanocarrier of luminescent hollowed mesoporous silica (L-hMS) was explored for the loading and controlled delivery of drugs. For the synthesis of L-hMS, self-activated luminescence hydroxyapatite (LHA) was used as a template. Different thicknesses (∼ 7-62 nm) of mesoporous silica shell were obtained by varying the volume of silica precursor and the subsequent removal of the LHA core, which resulted in hollow-cored (size of ∼ 40 nm × 10 nm) mesoporous silica nanoreservoirs, L-hMS. While the silica shell provided a highly mesoporous structure, enabling an effective loading of drug molecules, the luminescent property of LHA was also well preserved in both the silica-shelled and the hollow-cored nanocarriers. Doxorubicin (DOX), used as a model drug, was shown to be effectively loaded onto the mesopore structure and within the hollow space of the nanoreservoir. The DOX release was fairly pH-dependent, occurring more rapidly at pH 5.3 than at pH 7.4, and a long-term sustainable delivery over the test period of 2weeks was observed. The nanoreservoir exhibited favorable cell compatibility with low cytotoxicity and excellent cell uptake efficiency (over 90%). Treatment of HeLa cells with DOX-loaded L-hMS elicited a sufficient degree of biological efficacy of DOX, as confirmed in the DOX-induced apoptotic behaviors, including stimulation in caspase-3 expression, and was even more effective than the direct DOX treatment. Overall, the newly developed L-hMS nanoreservoirs may be potentially useful as a multifunctional (luminescent, mesoporous and biocompatible) carrier system to effectively load and sustainably deliver small molecules, including anticancer drugs.
Publisher: Wiley
Date: 08-02-2022
Abstract: Extracellular vesicles (e.g., exosomes) carrying various biomolecules (e.g., proteins, lipids, and nucleic acids) have rapidly emerged as promising platforms for many biomedical applications. Despite their enormous potential, their heterogeneity in surfaces and sizes, the high complexity of cargo biomolecules, and the inefficient uptake by recipient cells remain critical barriers for their theranostic applications. To address these critical issues, multifunctional nanomaterials, such as magnetic nanomaterials, with their tunable physical, chemical, and biological properties, may play crucial roles in next‐generation extracellular vesicles (EV)‐based disease diagnosis, drug delivery, tissue engineering, and regenerative medicine. As such, one aims to provide cutting‐edge knowledge pertaining to magnetic nanomaterials‐facilitated isolation, detection, and delivery of extracellular vesicles and their associated biomolecules. By engaging the fields of extracellular vesicles and magnetic nanomaterials, it is envisioned that their properties can be effectively combined for optimal outcomes in biomedical applications.
Publisher: MDPI AG
Date: 23-02-2021
DOI: 10.3390/NANO11020557
Abstract: Reactive oxygen species (ROS) regulate various functions of cells, including cell death, viability, and differentiation, and nanoparticles influence ROS depending on their size and shape. Selenium is known to regulate various physiological functions, such as cell differentiations and anti-inflammatory functions, and plays an important role in the regulation of ROS as an antioxidant. This study aims to investigate the effect of selenium nanoparticles (SeNPs) on the differentiation of osteogenic MC3T3-E1 cells. After fabrication of SeNPs with a size of 25.3 ± 2.6 nm, and confirmation of its oxidase-like activity, SeNPs were added to MC3T3-E1 cells with or without H2O2: 5~20 μg/mL SeNPs recovered cells damaged by 200 μM H2O2 via the intracellular ROS downregulating role of SeNPs, revealed by the ROS staining assay. The increase in osteogenic maturation with SeNPs was gradually investigated by expression of osteogenic genes at 3 and 7 days, Alkaline phosphatase activity staining at 14 days, and Alizarin red S staining at 28 days. Therefore, the role of SeNPs in regulating ROS and their therapeutic effects on the differentiation of MC3T3-E1 cells were determined, leading to possible applications for bone treatment.
Publisher: Public Library of Science (PLoS)
Date: 04-04-2014
Publisher: MDPI AG
Date: 23-08-2021
Abstract: Engineering polymeric nanoparticles for their shape, size, surface chemistry, and functionalization using various targeting molecules has shown improved biomedical applications for nanoparticles. Polymeric nanoparticles have created tremendous therapeutic platforms, particularly applications related to chemo- and immunotherapies in cancer. Recently advancements in immunotherapies have broadened this field in immunology and biomedical engineering, where “immunoengineering” creates solutions to target translational science. In this regard, the nanoengineering field has offered the various techniques necessary to manufacture and assemble multifunctional polymeric nanomaterial systems. These include nanoparticles functionalized using antibodies, small molecule ligands, targeted peptides, proteins, and other novel agents that trigger and encourage biological systems to accept the engineered materials as immune enhancers or as vaccines to elevate therapeutic functions. Strategies to engineer polymeric nanoparticles with therapeutic and targeting molecules can provide solutions for developing immune vaccines via maintaining the receptor storage in T- and B cells. Furthermore, cancer immunotherapy using polymeric nanomaterials can serve as a gold standard approach for treating primary and metastasized tumors. The current status of the limited availability of immuno-therapeutic drugs highlights the importance of polymeric nanomaterial platforms to improve the outcomes via delivering anticancer agents at localized sites, thereby enhancing the host immune response in cancer therapy. This review mainly focuses on the potential scientific enhancements and recent developments in cancer immunotherapies by explicitly discussing the role of polymeric nanocarriers as nano-vaccines. We also briefly discuss the role of multifunctional nanomaterials for their therapeutic impacts on translational clinical applications.
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C5NR02730F
Abstract: Effectiveness of the delivery of anticancer drugs and the efficacy of cancer therapy can be enhanced using smart multifunctional mesoporous nanoparticles.
Publisher: American Chemical Society (ACS)
Date: 24-10-2019
Abstract: Providing appropriate biophysical and biochemical cues to the interface is a facile strategy to enhance the osteogenic ability of metallic implants. Here we exploited this through the incorporation of mesoporous bioactive glass nanoparticles (MBGN) at a high content (1:1 by weight) to a biopolymer chitosan in the electrodeposition process of titanium. The MGBN/chitosan layer thickness, tunable by electrodeposition parameters, exhibited an accelerated ability of apatite mineral induction in a body simulating medium. Of note, the involvement of MBGN could generate nanoscale roughness in a unique range of 10-25 nm. Moreover, the layer showed a slowly releasing profile of ions (calcium and silicate) over weeks at therapeutically relevant doses. The ion-releasing nanotopological surface was demonstrated to alter the preosteoblasts responses in a way favorable for osteogenic differentiation. The combinatory cues of nanotopology (25 nm roughness) and ion release enabled highly accelerated cellular anchorage with somewhat limited spreading area at initial periods. The subsequent osteoblastic differentiation behaviors on the engineered surface, as examined up to 21 days, showed significantly enhanced alkaline phosphate activity and up-regulated expression of bone-associated genes (ALP, Col I, OPN, and OCN). These results indicate that the combinatory cues provided by nanotopology (25 nm roughness) and ions released from MBGN are highly effective in stimulating osteoblastic differentiation and suggest that the MBGN/chitosan may serve as a potential composition for bone implant coatings.
Publisher: Elsevier BV
Date: 06-2022
Publisher: SAGE Publications
Date: 2021
DOI: 10.1177/20417314211019238
Abstract: Current gold standard to treat soft tissue injuries caused by trauma and pathological condition are autografts and off the shelf fillers, but they have inherent weaknesses like donor site morbidity, immuno-compatibility and graft failure. To overcome these limitations, tissue-engineered polymers are seeded with stem cells to improve the potential to restore tissue function. However, their interaction with native tissue is poorly understood so far. To study these interactions and improve outcomes, we have fabricated scaffolds from natural polymers (collagen, fibrin and elastin) by custom-designed processes and their material properties such as surface morphology, swelling, wettability and chemical cross-linking ability were characterised. By using 3D scaffolds, we comprehensive assessed survival, proliferation and phenotype of adipose-derived stem cells in vitro. In vivo, scaffolds were seeded with adipose-derived stem cells and implanted in a rodent model, with X-ray microtomography, histology and immunohistochemistry as read-outs. Collagen-based materials showed higher cell adhesion and proliferation in vitro as well as higher adipogenic properties in vivo. In contrast, fibrin demonstrated poor cellular and adipogenesis properties but higher angiogenesis. Elastin formed the most porous scaffold, with cells displaying a non-aggregated morphology in vitro while in vivo elastin was the most degraded scaffold. These findings of how polymers present in the natural polymers mimicking ECM and seeded with stem cells affect adipogenesis in vitro and in vivo can open avenues to design 3D grafts for soft tissue repair.
Publisher: Wiley
Date: 04-2020
DOI: 10.1002/PRI.1827
Abstract: To develop an adherence questionnaire specific to stroke and measure the level of adherence to home-based exercises among community-dwelling stroke survivors. We developed and validated the "Stroke-Specific Measure of Adherence to Home-based Exercises" (SS-MAHE). We measured the exercise adherence among 92 community-dwelling stroke survivors in a cross-sectional study. The SS-MAHE has two sections covering (a) the dosage of prescribed exercises and (b) dosage of actual exercises done by the participants. It was found to be reliable with ICC score of 0.81 (95% CI, 0.44, 0.94, p = .001.) Adherence was measured by comparing prescribed exercises to the actual exercises performed at home. We rated participants as "adherent" if they were following more than 70% of the prescribed exercise dosage. In our s le of 92 stroke survivors, only 28% of participants were adherent to prescribed home-based exercises. SS-MAHE is a practical and reliable tool to measure adherence to home-based exercises after a stroke. Exercise adherence among stroke survivors is less than ideal. There is a need for strategies to specifically target exercise adherence in stroke survivors.
Publisher: American Scientific Publishers
Date: 10-2016
Abstract: Coatings of metallic implants facilitate a new bioactive interface that favors osteogenic responses and bone formation. Providing a therapeutic capacity to the coatings, involving with a sustainable and controllable delivery of drug molecules, significantly improves the bone regenerative potential. Here we design a novel nanocomposite coating, made of mesoporous silica-shelled hydroxyapatite (MS-HA) nanoparticles and chitosan (Chi), incorporating osteogenic drug dexamethasone phosphate (Dex(P)) within the MS-HA, by the process of an electrophoretic deposition (EPD). MS-HA, produced by a sol–gel reaction of silica onto an HA nanorod, exhibited mono-dispersed core–shell nanoparticles with a size of ∼40 nm and a shell thickness of ∼25 nm. The highly mesoporous structure enabled an effective loading of Dex(P) onto the nanocarriers, showing a loading capacity as high as 15% by weight. The Dex(P) loaded MS-HA were homogenized with Chi in acidic ethanol/water to allow for the EPD process. Nanocomposite coatings were produced well, forming thicknesses a few micrometers largely tunable with EPD parameters and exhibiting MS-HA nanoparticles evenly distributed within Chi matrix. While Dex(P) release from the bare MS-HA nanocarrier was very abrupt, showing a complete release within 24 h, the Dex(P) release from the nanocomposite coatings profiled a highly sustainable pattern over a month. Rat mesenchymal stem cells cultured on the Dex(P)-releasing coatings were substantially stimulated to an osteoblastic lineage, presenting enhanced alkaline phosphate activity and higher levels of osteogenic genes, with respect to coatings free of Dex(P). An indirect culture test also confirmed the long-term release effects of Dex(P) from the coatings over 4 weeks. The currently-developed nanocomposite EPD coatings, with a capacity to load osteogenic drug at large quantity and to deliver for a long-term period, are considered as a promising therapeutic coating platform for metallic bone implants.
Publisher: American Chemical Society (ACS)
Date: 11-02-2014
DOI: 10.1021/AM4056936
Abstract: Here we communicate the development of a novel multifunctional hybrid nanomaterial, magnetic carbon nanotubes (CNTs) ensheathed with mesoporous silica, for the simultaneous applications of drug delivery and imaging. Magnetic nanoparticles (MNPs) were first decorated onto the multiwalled CNTs, which was then layered with mesoporous silica (mSiO2) to facilitate the loading of bioactive molecules to a large quantity while exerting magnetic properties. The hybrid nanomaterial showed a high mesoporosity due to the surface-layered mSiO2, and excellent magnetic properties, including magnetic resonance imaging in vitro and in vivo. The mesoporous and magnetic hybrid nanocarriers showed high loading capacity for therapeutic molecules including drug gentamicin and protein cytochrome C. In particular, genetic molecule siRNA was effectively loaded and then released over a period of days to a week. Furthermore, the hybrid nanocarriers exhibited a high cell uptake rate through magnetism, while eliciting favorable biological efficacy within the cells. This novel hybrid multifunctional nanocarrier may be potentially applicable as drug delivery and imaging systems.
Publisher: MDPI AG
Date: 11-10-2022
DOI: 10.3390/PHARMACEUTICS14102162
Abstract: Current therapeutic treatments for the repair and/or replacement of damaged skin following disease or traumatic injury is severely limited. The chicken eggshell membrane (ESM) is a unique material: its innate physical and mechanical characteristics offer optimal barrier properties and, as a naturally derived extract, it demonstrates inherent biocompatibility/biodegradability. To further enhance its therapeutic and clinical potential, the ESM can be modified with the thermo-responsive polymer, poly(N-isopropylacrylAmide) (PNIPAAm) as well as the incorporation of (drug-loaded) silver nanoparticles (AgNP) essentially, by a simple change in temperature, the release and delivery of the NP can be targeted and controlled. In this study, ESM s les were isolated using a decellularization protocol, and the physical and mechanical characteristics were profiled using SEM, FT-IR, DSC and DMA. PNIPAAm was successfully grafted to the ESM via amidation reactions and confirmed using FT-IR, which demonstrated the distinctive peaks associated with Amide A (3275 cm−1), Amide B (2970 cm−1), Amide I (1630 cm−1), Amide II (1535 cm−1), CH2, CH3 groups, and Amide III (1250 cm−1) peaks. Confirmation of the incorporation of AgNP onto the stratified membrane was confirmed visually with SEM, qualitatively using FT-IR and also via changes in absorbance at 380 nm using UV-Vis spectrophotometry during a controlled release study for 72 h. The biocompatibility and cytotoxicity of the novel constructs were assessed using human dermal fibroblast (HDFa) and mouse dermal fibroblast (L929) cells and standard cell culture assays. Metabolic activity assessment (i.e., MTS assay), LDH-release profiles and Live/Dead staining demonstrated good attachment and spreading to the s les, and high cell viability following 3 days of culture. Interestingly, longer-term viability ( days), the ESM-PNIPAAm and ESM-PNIPAAm (AgNP) s les showed a greater and sustained cell viability profile. In summary, the modified and enhanced ESM constructs were successfully prepared and characterized in terms of their physical and mechanical profiles. AgNP were successfully loaded into the construct and demonstrated a desirable release profile dependent on temperature modulation. Fibroblasts cultured on the extracted ESM s les and ESM-PNIPAAm demonstrated high biocompatibility in terms of high cell attachment, spreading, viability and proliferation rates. As such, this work summarizes the development of an enhanced ESM-based construct which may be exploited as a clinical/therapeutic wound dressing as well as a possible application as a novel biomaterial scaffold for drug development.
Publisher: American Chemical Society (ACS)
Date: 11-03-2022
DOI: 10.1021/JACS.1C08861
Abstract: The receptor-ligand interactions in cells are dynamically regulated by modulation of the ligand accessibility. In this study, we utilize size-tunable magnetic nanoparticle aggregates ordered at both nanometer and atomic scales. We flexibly anchor magnetic nanoparticle aggregates of tunable sizes over the cell-adhesive RGD ligand (Arg-Gly-Asp)-active material surface while maintaining the density of dispersed ligands accessible to macrophages at constant. Lowering the accessible ligand dispersity by increasing the aggregate size at constant accessible ligand density facilitates the binding of integrin receptors to the accessible ligands, which promotes the adhesion of macrophages. In high ligand dispersity, distant magnetic manipulation to lift the aggregates (which increases ligand accessibility) stimulates the binding of integrin receptors to the accessible ligands available under the aggregates to augment macrophage adhesion-mediated pro-healing polarization both in vitro and in vivo. In low ligand dispersity, distant control to drop the aggregates (which decreases ligand accessibility) repels integrin receptors away from the aggregates, thereby suppressing integrin receptor-ligand binding and macrophage adhesion, which promotes inflammatory polarization. Here, we present "accessible ligand dispersity" as a novel fundamental parameter that regulates receptor-ligand binding, which can be reversibly manipulated by increasing and decreasing the ligand accessibility. Limitless tuning of nanoparticle aggregate dimensions and morphology can offer further insight into the regulation of receptor-ligand binding in host cells.
Location: Korea, Republic of
Location: United Kingdom of Great Britain and Northern Ireland
Location: United Kingdom of Great Britain and Northern Ireland
Location: Korea, Republic of
No related grants have been discovered for Kapil D Patel.