ORCID Profile
0000-0001-7756-8444
Current Organisation
University of Nottingham
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Elsevier BV
Date: 12-2010
Publisher: SPIE
Date: 16-02-2005
DOI: 10.1117/12.606789
Publisher: American Chemical Society (ACS)
Date: 02-01-2018
Abstract: Bacterial infections in healthcare settings are a frequent accompaniment to both routine procedures such as catheterization and surgical site interventions. Their impact is becoming even more marked as the numbers of medical devices that are used to manage chronic health conditions and improve quality of life increases. The resistance of pathogens to multiple antibiotics is also increasing, adding an additional layer of complexity to the problems of employing safe and effective medical procedures. One approach to reducing the rate of infections associated with implanted and indwelling medical devices is the use of polymers that resist the formation of bacterial biofilms. To significantly accelerate the discovery of such materials, we show how state of the art machine learning methods can generate quantitative predictions for the attachment of multiple pathogens to a large library of polymers in a single model for the first time. Such models facilitate design of polymers with very low pathogen attachment across different bacterial species that will be candidate materials for implantable or indwelling medical devices such as urinary catheters, cochlear implants, and pacemakers.
Publisher: MyJove Corporation
Date: 25-01-2012
DOI: 10.3791/3636
Publisher: Springer Science and Business Media LLC
Date: 22-08-2010
DOI: 10.1038/NMAT2812
Publisher: American Chemical Society (ACS)
Date: 02-11-2016
Publisher: Elsevier BV
Date: 2010
DOI: 10.1016/J.BIOMATERIALS.2009.09.056
Abstract: Many fundamental biological processes, including early embryo development, immune responses and the progression of pathogens, are mediated by gradients of biological molecules. Understanding these vital physiological processes requires the development of biomaterial platforms that can mimic them in-vitro. Such platforms include laboratory generated surface gradients of biological molecules. In this work, we report a method for the generation of surface gradients of two proteins. We used a surface grafting density gradient of polyethylene glycol (PEG) to control protein adsorption. In addition, we used protein size as a tool to control the position and the adsorbed amount of both proteins. To demonstrate our concept, we used fibrinogen as an ex le of a large protein and lysozyme as an ex le of a small protein. However, we speculate that the same strategy could be extended to any other pair of large and small proteins. We used X-ray photoelectron spectroscopy and sessile drop contact angle measurements to determine the chemical composition and wettability of the gradients. Protein adsorption was studied by surface plasmon resonance imaging.
Publisher: Elsevier BV
Date: 04-2016
Publisher: Royal Society of Chemistry (RSC)
Date: 2020
DOI: 10.1039/C9BM00875F
Abstract: Optical fibre sensors successfully detect and quantify bacterial attachment and biofilm formation on uncoated and coated endotracheal tube surfaces.
Publisher: Springer Science and Business Media LLC
Date: 14-05-2021
DOI: 10.1038/S42004-021-00506-1
Abstract: Glycosaminoglycans (GAGs) are important biopolymers that differ in the sequence of saccharide units and in post polymerisation alterations at various positions, making these complex molecules challenging to analyse. Here we describe an approach that enables small quantities ( ng) of over 400 different GAGs to be analysed within a short time frame (3–4 h). Time of flight secondary ion mass spectrometry (ToF-SIMS) together with multivariate analysis is used to analyse the entire set of GAG s les. Resultant spectra are derived from the whole molecules and do not require pre-digestion. All 6 possible GAG types are successfully discriminated, both alone and in the presence of fibronectin. We also distinguish between pharmaceutical grade heparin, derived from different animal species and from different suppliers, to a sensitivity as low as 0.001 wt%. This approach is likely to be highly beneficial in the quality control of GAGs produced for therapeutic applications and for characterising GAGs within biomaterials or from in vitro cell culture.
Publisher: American Association for the Advancement of Science (AAAS)
Date: 27-01-2023
Abstract: Innovative approaches to prevent catheter-associated urinary tract infections (CAUTIs) are urgently required. Here, we describe the discovery of an acrylate copolymer capable of resisting single- and multispecies bacterial biofilm formation, swarming, encrustation, and host protein deposition, which are major challenges associated with preventing CAUTIs. After screening ~400 acrylate polymers, poly( tert -butyl cyclohexyl acrylate) was selected for its biofilm- and encrustation-resistant properties. When combined with the swarming inhibitory poly(2-hydroxy-3-phenoxypropyl acrylate), the copolymer retained the bioinstructive properties of the respective homopolymers when challenged with Proteus mirabilis , Pseudomonas aeruginosa , Staphylococcus aureus , and Escherichia coli . Urinary tract catheterization causes the release of host proteins that are exploited by pathogens to colonize catheters. After preconditioning the copolymer with urine collected from patients before and after catheterization, reduced host fibrinogen deposition was observed, and resistance to erse uropathogens was maintained. These data highlight the potential of the copolymer as a urinary catheter coating for preventing CAUTIs.
Publisher: Elsevier BV
Date: 03-2015
DOI: 10.1016/J.JCONREL.2015.01.037
Abstract: Catheter-associated urinary tract infection (CAUTI) is the commonest hospital-acquired infection, accounting for over 100,000 hospital admissions within the USA annually. Biomaterials and processes intended to reduce the risk of bacterial colonization of the catheters for long-term users have not been successful, mainly because of the need for long duration of activity in flow conditions. Here we report the results of impregnation of urinary catheters with a combination of rif icin, sparfloxacin and triclosan. In flow experiments, the antimicrobial catheters were able to prevent colonization by common uropathogens Proteus mirabilis, Staphylococcus aureus and Escherichia coli for 7 to 12weeks in vitro compared with 1-3days for other, commercially available antimicrobial catheters currently used clinically. Resistance development was minimized by careful choice of antimicrobial combinations. Drug release profiles and distribution in the polymer, and surface analysis were also carried out and the process had no deleterious effect on the mechanical performance of the catheter or its balloon. The antimicrobial catheter therefore offers for the first time a means of reducing infection and its complications in long-term urinary catheter users.
Publisher: Humana Press
Date: 15-11-2011
DOI: 10.1007/978-1-61737-970-3_13
Abstract: DNA, protein and cell microarrays are increasingly used in a multitude of bioassays. All of these arrays require substrates that are suitable for the immobilisation and display of arrayed probe molecules whilst at the same time resisting non-specific interactions of biomolecules with the substrate in areas between printed spots. To meet these conflicting requirements, three different approaches have been developed, all of which were based on low-fouling, high-density poly(ethylene glycol) (PEG) background coatings. In the first approach, the coating was based on allylamine plasma polymerisation (ALAPP) and the subsequent high-density grafting of PEG, followed by the generation of a surface chemical pattern using laser ablation. In the second approach, a photoreactive polymer was printed on the same ALAPP-PEG background. The third approach was based on ALAPP deposition followed by the formation of a multifunctional layer by spin coating a PEG-based polymer that also displayed epoxy groups. The successful demonstration of DNA, protein and cell microarrays has been achieved on each of these coatings.
Publisher: IEEE
Date: 06-2011
Publisher: Wiley
Date: 03-10-2019
Publisher: Informa UK Limited
Date: 14-10-2010
Publisher: Royal Society of Chemistry (RSC)
Date: 2011
DOI: 10.1039/C1SM06063E
Publisher: Wiley
Date: 06-2015
Publisher: Springer Science and Business Media LLC
Date: 05-10-2022
DOI: 10.1038/S41598-022-20952-8
Abstract: Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2)—the causative agent of coronavirus disease 2019 (COVID-19)—has caused a global public health emergency. Personal protective equipment (PPE) is the primary defence against viral exposure in healthcare and community settings. However, the surfaces of PPE materials may trap virus for contact transmission or through laden aerosols generated during removal of PPE, through cleaning or during movement. In this study, the relative efficacy of current PPE materials in terms of virion adsorption to materials and their antiviral potency, has been evaluated on a wide range of PPE for the first time, including four polymer glove types, two types of scrubs, apron material, a mask, visor and a selection of other commercial polymers and products. Although differences in virion adsorption to the test materials were observed, none of the existing polymer-based PPE resulted in more than tenfold reduction in the SARS-CoV-2 titre within either 10 min or 30 min contact period. The wettability and surface chemistry of the test materials were analysed to investigate any correlations with their surface physicochemical properties. While no correlation was found between wettability and viral retention under air flow challenge, one secondary ion of m/z 101.03 (+) and three secondary ions of m/z 31.98 (−), 196.93 (−) and 394.33 (+) in ToF–SIMS data of the test materials showed positive and negative correlations with the viral retention, respectively, which was identified by PLS regression model, suggesting that the surface chemistry plays a role in determining the extent of virion adsorption. Our findings outline the material aspects that influence the efficacy of current PPE against SARS-CoV-2 transmission and give suggestions on the development of novel simple polymer-based PPE for better infection protection.
Publisher: American Association for the Advancement of Science (AAAS)
Date: 05-06-2020
Abstract: Anti-attachment materials that are sprayable and 3D-printable passively prevent colonization by harmful fungi.
Publisher: Wiley
Date: 27-05-2018
Publisher: Royal Society of Chemistry (RSC)
Date: 2013
DOI: 10.1039/C2TB00379A
Publisher: Elsevier BV
Date: 10-2006
DOI: 10.1016/J.TIBTECH.2006.08.001
Abstract: Many biological events, such as cellular communication, antigen recognition, tissue repair and DNA linear transfer, are intimately associated with biomolecule interactions at the solid-liquid interface. To facilitate the study and use of these biological events for biodevice and biomaterial applications, a sound understanding of how biomolecules behave at interfaces and a concomitant ability to manipulate biomolecules spatially and temporally at surfaces is required. This is particularly true for cell microarray applications, where a range of biological processes must be duly controlled to maximize the efficiency and throughput of these devices. Of particular interest are transfected-cell microarrays (TCMs), which significantly widen the scope of microarray genomic analysis by enabling the high-throughput analysis of gene function within living cells. This article reviews this current research focus, discussing fundamental and applied research into the spatial and temporal surface manipulation of DNA, proteins and other biomolecules and the implications of this work for TCMs.
Publisher: Elsevier BV
Date: 05-2006
DOI: 10.1016/J.BIOS.2005.10.008
Abstract: The manipulation of biomolecules at solid/liquid interfaces is important for the enhanced performance of a number of biomedical devices, including biochips. This study focuses on the spatial control of surface interactions of DNA as well as the electro-stimulated adsorption and desorption of DNA by appropriate surface modification of highly doped p-type silicon. Surface modification by plasma polymerisation of allylamine resulted in a surface that supported DNA adsorption and sustained cell attachment. Subsequent high-density grafting of poly(ethylene oxide) formed a low fouling layer resistant to biomolecule adsorption and cell attachment. Spatially controlled excimer laser ablation of the surface produced patterns of re-exposed plasma polymer with high-resolution. On patterned surfaces, preferential electro-stimulated adsorption of DNA to the allylamine plasma polymer surface and subsequent desorption by the application of a negative bias was observed. Furthermore, the concept presented here was investigated for use in transfection chips. Cell culture experiments with human embryonic kidney cells, using the expression of green fluorescent protein as a reporter, demonstrated efficient and controlled transfection of cells. Electro-stimulated desorption of DNA was shown to yield significantly enhanced solid phase transfection efficiencies to values of up to 30%. The ability to spatially control DNA adsorption combined with the ability to control the binding and release of DNA by application of a controlled voltage enables an advanced level of control over DNA bioactivity on solid substrates and lends itself to biochip applications.
Publisher: Wiley
Date: 09-12-2014
Publisher: American Chemical Society (ACS)
Date: 09-03-2009
DOI: 10.1021/BM801217N
Abstract: The fabrication and characterization of chemical patterns using a technique that can be readily integrated with methods currently used for the formation of microarrays is presented. A high density poly(ethylene glycol) coating was deposited on glass slides as a background exhibiting low cell attachment properties. Phenylazide modified polymers were then printed on this background. UV irradiation of these polymer arrays resulted in the cross-linking of the polymer spots and their covalent attachment to the surface. Cell attachment was shown to follow the resultant surface chemistry pattern. Furthermore, the use of a robotic contact printer enabled the facile deposition of DNA microarrays on top of and aligned with the polymer microarrays. A transfected cell microarray was generated in this way, demonstrating not only the ability of this platform to limit cell attachment to specific regions, but the suitability for chip-based functional genomics, in particular, and high density cell assays in general.
Publisher: American Chemical Society (ACS)
Date: 23-10-2018
Abstract: The identification of biomaterials that modulate cell responses is a crucial task for tissue engineering and cell therapy. The identification of novel materials is complicated by the immense number of synthesizable polymers and the time required for testing each material experimentally. In the current study, polymeric biomaterial-cell interactions were assessed rapidly using a microarray format. The attachment, proliferation, and differentiation of human dental pulp stem cells (hDPSCs) were investigated on 141 homopolymers and 400 erse copolymers. The copolymer of isooctyl acrylate and 2-(methacryloyloxy)ethyl acetoacetate achieved the highest attachment and proliferation of hDPSC, whereas high cell attachment and differentiation of hDPSC were observed on the copolymer of isooctyl acrylate and trimethylolpropane ethoxylate triacrylate. Computational models were generated, relating polymer properties to cellular responses. These models could accurately predict cell behavior for up to 95% of materials within a test set. The models identified several functional groups as being important for supporting specific cell responses. In particular, oxygen-containing chemical moieties, including fragments from the acrylate/acrylamide backbone of the polymers, promoted cell attachment. Small hydrocarbon fragments originating from polymer pendant groups promoted cell proliferation and differentiation. These computational models constitute a key tool to direct the discovery of novel materials within the enormous chemical space available to researchers.
Publisher: American Chemical Society (ACS)
Date: 26-08-2016
Publisher: Wiley
Date: 18-02-2013
Publisher: IOP Publishing
Date: 30-10-2009
DOI: 10.1088/1758-5082/1/4/045003
Abstract: The spatial control over biomolecule- and cell-surface interactions is of great interest to a broad range of biomedical applications, including sensors, implantable devices and cell microarrays. Microarrays in particular require precise spatial control and the formation of patterns with microscale features. Here, we have developed an approach specifically designed for transfected cell microarray (TCM) applications that allows microscale spatial control over the location of both DNA and cells on highly doped p-type silicon substrates. This was achieved by surface modification, involving plasma polymerization of allylamine, grafting of poly(ethylene glycol) and subsequent excimer laser ablation. DNA could be delivered in a spatially defined manner using ink-jet printing. In addition, electroporation was investigated as an approach to transfect attached cells with adsorbed DNA and good transfection efficiencies of approximately 20% were observed. The ability of the microstructured surfaces to spatially direct both DNA adsorption and cell attachment was demonstrated in a functional TCM, making this system an exciting platform for chip-based functional genomics.
Publisher: Wiley
Date: 04-02-2014
Publisher: Wiley
Date: 19-02-2016
DOI: 10.1002/SIA.5959
Publisher: Elsevier BV
Date: 09-2009
DOI: 10.1016/J.ACTBIO.2009.03.040
Abstract: The interactions of biomolecules and cells with solid interfaces play a pivotal role in a range of biomedical applications and have therefore been studied in great detail. An improved understanding of these interactions results in the ability to manipulate DNA, proteins and other biomolecules, as well as cells, spatially and temporally at surfaces with high precision. This in turn engenders the development of advanced devices, such as biosensors, bioelectronic components, smart biomaterials and microarrays. Spatial control can be achieved by the production of patterned surface chemistries using modern high-resolution patterning technologies based on lithography, microprinting or microfluidics, whilst temporal control is accessible through the application of switchable surface architectures. The combination of these two surface properties offers unprecedented control over the behaviour of biomolecules and cells at the solid-liquid interface. This review discusses the behaviour of biomolecules and cells at solid interfaces and highlights fundamental and applied research exploring patterned and switchable surfaces.
Publisher: Springer Science and Business Media LLC
Date: 16-11-2011
DOI: 10.1007/S10856-011-4474-5
Abstract: Three different formulations comprising two drugs, felodipine and hydrochlorothiazide (HCT) and two polymers, poly(vinyl pyrolidone) (PVP) and poly(lactic-co-glycolic acid) (PLGA) were inkjet printed as micro-dot arrays and analysed on an in idual micro-spot basis by time-of-flight secondary ion mass spectrometry (ToF-SIMS). For the HCT/PLGA formulation, the spots showed heterogeneity of the drug and other chemical constituents. To further investigate these heterogeneities, multivariate curve resolution was applied to the ToF-SIMS hyperspectral image datasets. This approach successfully identified distinct chemical components elucidating the HCT, PLGA, substrate material, and contaminants based on sulphur, phosphorous and sodium chloride. Spots printed using either of the drugs with PVP exhibited full substrate coverage and a uniform distribution of the active ingredient along with all other constituents within the printed spot area. This represents the preferred situation in terms of stability and controlling the release of a drug from a polymer matrix.
Publisher: American Vacuum Society
Date: 23-05-2017
DOI: 10.1116/1.4984011
Abstract: Catheter associated urinary tract infections are the most common health related infections worldwide, contributing significantly to patient morbidity and mortality and increased health care costs. To reduce the incidence of these infections, new materials that resist bacterial biofilm formation are needed. A composite catheter material, consisting of bulk poly(dimethylsiloxane) (PDMS) coated with a novel bacterial biofilm resistant polyacrylate [ethylene glycol dicyclopentenyl ether acrylate (EGDPEA)-co-di(ethyleneglycol) methyl ether methacrylate (DEGMA)], has been proposed. The coated material shows excellent bacterial resistance when compared to commercial catheter materials, but delamination of the EGDPEA-co-DEGMA coatings under mechanical stress presents a challenge. In this work, the use of oxygen plasma treatment to improve the wettability and reactivity of the PDMS catheter material and improve adhesion with the EGDPEA-co-DEGMA coating has been investigated. Argon cluster three dimensional-imaging time-of-flight secondary ion mass spectrometry (ToF-SIMS) has been used to probe the buried adhesive interface between the EGDPEA-co-DEGMA coating and the treated PDMS. ToF-SIMS analysis was performed in both dry and frozen-hydrated states, and the results were compared to mechanical tests. From the ToF-SIMS data, the authors have been able to observe the presence of PDMS, silicates, salt particles, cracks, and water at the adhesive interface. In the dry catheters, low molecular weight PDMS oligomers at the interface were associated with poor adhesion. When hydrated, the hydrophilic silicates attracted water to the interface and led to easy delamination of the coating. The best adhesion results, under hydrated conditions, were obtained using a combination of 5 min O2 plasma treatment and silane primers. Cryo-ToF-SIMS analysis of the hydrated catheter material showed that the bond between the primed PDMS catheter and the EGDPEA-co-DEGMA coating was stable in the presence of water. The resulting catheter material resisted Escherichia coli and Proteus mirabilis biofilm colonization by up to 95% compared with uncoated PDMS after 10 days of continuous bacterial exposure and had the mechanical properties necessary for use as a urinary catheter.
Publisher: SPIE
Date: 21-12-2008
DOI: 10.1117/12.759382
Publisher: Wiley
Date: 15-02-2023
Abstract: Biofilm formation is a major cause of hospital‐acquired infections. Research into biofilm‐resistant materials is therefore critical to reduce the frequency of these events. Polymer microarrays offer a high‐throughput approach to enable the efficient discovery of novel biofilm‐resistant polymers. Herein, bacterial attachment and surface chemistry are studied for a polymer microarray to improve the understanding of Pseudomonas aeruginosa biofilm formation on a erse set of polymeric surfaces. The relationships between time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) data and biofilm formation are analyzed using linear multivariate analysis (partial least squares [PLS] regression) and a nonlinear self‐organizing map (SOM). The SOM models revealed several combinations of fragment ions that are positively or negatively associated with bacterial biofilm formation, which are not identified by PLS. With these insights, a second PLS model is calculated, in which interactions between key fragments (identified by the SOM) are explicitly considered. Inclusion of these terms improved the PLS model performance and shows that, without such terms, certain key fragment ions correlated with bacterial attachment may not be identified. The chemical insights provided by the combination of PLS regression and SOM will be useful for the design of materials that support negligible pathogen attachment.
Publisher: Elsevier BV
Date: 2010
DOI: 10.1016/J.BIOMATERIALS.2009.09.037
Abstract: The high throughput discovery of new bio materials can be achieved by rapidly screening many different materials synthesised by a combinatorial approach to identify the optimal composition that fulfils a particular biomedical application. Here we review the literature in this area and conclude that for polymers this process is best achieved in a microarray format, which enable thousands of cell-material interactions to be monitored on a single chip. Polymer microarrays can be formed by printing pre-synthesised polymers or by printing monomers onto the chip where on-slide polymerisation is initiated. The surface properties of the material can be analysed and correlated to the biological performance using high throughput surface analysis, including time-of-flight secondary ion mass spectrometry (ToF-SIMS), X-ray photoelectron spectroscopy (XPS) and water contact angle (WCA) measurements. This approach enables the surface properties responsible for the success of a material to be understood, which in turn provides the foundations of future material design. The high throughput discovery of materials using polymer microarrays has been explored for many cell-based applications including the isolation of specific cells from heterogeneous populations, the attachment and differentiation of stem cells and the controlled transfection of cells. Further development of polymerisation techniques and high throughput biological assays amenable to the polymer microarray format will broaden the combinatorial space and biological phenomenon that polymer microarrays can explore, and increase their efficacy. This will, in turn, facilitate the discovery of optimised polymeric materials for many biomaterial applications.
Publisher: American Vacuum Society
Date: 06-02-2015
DOI: 10.1116/1.4906484
Abstract: The complexity of hyperspectral time of flight secondary ion mass spectrometry (ToF-SIMS) datasets makes their subsequent analysis and interpretation challenging, and is often an impasse to the identification of trends and differences within large s le-sets. The application of multivariate data analysis has become a routine method to successfully deconvolute and analyze objectively these datasets. The advent of high-resolution large area ToF-SIMS imaging capability has enlarged further the data handling challenges. In this work, a modified multivariate curve resolution image analysis of a polymer microarray containing 70 different poly(meth)acrylate type spots (over a 9.2 × 9.2 mm area) is presented. This analysis distinguished key differences within the polymer library such as the differentiation between acrylate and methacrylate polymers and variance specific to side groups. Partial least squares (PLS) regression analysis was performed to identify correlations between the ToF-SIMS surface chemistry and the protein adsorption. PLS analysis identified a number of chemical moieties correlating with high or low protein adsorption, including ions derived from the polymer backbone and polyethylene glycol side-groups. The retrospective validation of the findings from the PLS analysis was also performed using the secondary ion images for those ions found to significantly contribute to high or low protein adsorption.
Publisher: Wiley
Date: 29-05-2021
Abstract: As the understanding of disease grows, so does the opportunity for personalization of therapies targeted to the needs of the in idual. To bring about a step change in the personalization of medical devices it is shown that multi‐material inkjet‐based 3D printing can meet this demand by combining functional materials, voxelated manufacturing, and algorithmic design. In this paper composite structures designed with both controlled deformation and reduced biofilm formation are manufactured using two formulations that are deposited selectively and separately. The bacterial biofilm coverage of the resulting composites is reduced by up to 75% compared to commonly used silicone rubbers, without the need for incorporating bioactives. Meanwhile, the composites can be tuned to meet user defined mechanical performance with ±10% deviation. Device manufacture is coupled to finite element modelling and a genetic algorithm that takes the user‐specified mechanical deformation and computes the distribution of materials needed to meet this under given load constraints through a generative design process. Manufactured products are assessed against the mechanical and bacterial cell‐instructive specifications and illustrate how multifunctional personalization can be achieved using generative design driven multi‐material inkjet based 3D printing.
Publisher: Wiley
Date: 15-05-2012
DOI: 10.1002/SIA.5042
Publisher: Wiley
Date: 22-05-2012
DOI: 10.1002/SIA.5040
Publisher: Wiley
Date: 17-06-2013
Publisher: SPIE
Date: 27-12-2007
DOI: 10.1117/12.695595
Publisher: Wiley
Date: 04-12-2013
Publisher: SPIE
Date: 27-12-2007
DOI: 10.1117/12.695954
Publisher: American Chemical Society (ACS)
Date: 05-2009
DOI: 10.1021/LA900735N
Abstract: Polymer microarrays provide a high-throughput format in which to assess biointerfacial interactions. This endeavor greatly assists with the development of advanced biomaterials. In order to increase the scope of this platform technology, the development of analytical tools that are compatible with the microarray format and are capable of analyzing biomolecular interactions in high throughput is needed. Here, we show that surface plasmon resonance imaging (SPRi) is such a tool. SPRi enables spatially resolved, surface sensitive, label free, real-time analysis of multiple surface-biomolecular interactions in parallel. In order to demonstrate this, we first printed phenylazide-modified polymers onto a slide coated with a low fouling base polymer. UV irradiation of the slide resulted in the cross-linking of the printed polymer spots to the surface. SPRi was then employed to study the adsorption and desorption of bovine serum albumin, collagen, and fibronectin to these adhesive microarray spots. The spots were also incubated with an adherent cell line, enabling insight into the underlying mechanisms of cell attachment to the polymers studied. For the system analyzed here, electrostatic interactions were shown to dominate cell attachment.
Publisher: Elsevier BV
Date: 02-2022
DOI: 10.1016/J.BIOMATERIALS.2021.121350
Abstract: Chronic infection as a result of bacterial biofilm formation on implanted medical devices is a major global healthcare problem requiring new biocompatible, biofilm-resistant materials. Here we demonstrate how bespoke devices can be manufactured through ink-jet-based 3D printing using bacterial biofilm inhibiting formulations without the need for eluting antibiotics or coatings. Candidate monomers were formulated and their processability and reliability demonstrated. Formulations for in vivo evaluation of the 3D printed structures were selected on the basis of their in vitro bacterial biofilm inhibitory properties and lack of mammalian cell cytotoxicity. In vivo in a mouse implant infection model, Pseudomonas aeruginosa biofilm formation on poly-TCDMDA was reduced by ∼99% when compared with medical grade silicone. Whole mouse bioluminescence imaging and tissue immunohistochemistry revealed the ability of the printed device to modulate host immune responses as well as preventing biofilm formation on the device and infection of the surrounding tissues. Since 3D printing can be used to manufacture devices for both prototyping and clinical use, the versatility of ink-jet based 3D-printing to create personalised functional medical devices is demonstrated by the biofilm resistance of both a finger joint prosthetic and a prostatic stent printed in poly-TCDMDA towards P. aeruginosa and Staphylococcus aureus.
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C9RE00173E
Abstract: A novel single-well prototype high throughput microwave reactor geometry has been produced and shown to be capable of synthesizing an array of non-commercially available methacrylate monomers.
Publisher: Elsevier BV
Date: 05-2008
Publisher: American Vacuum Society
Date: 05-2023
DOI: 10.1116/6.0002604
Abstract: Secondary ion mass spectrometry (SIMS) offers advantages over both liquid extraction mass spectrometry and matrix assisted laser desorption mass spectrometry in that it provides the direct in situ analysis of molecules and has the potential to preserve the 3D location of an analyte in a s le. Polysaccharides are recognized as challenging analytes in the mass spectrometry of liquids and are also difficult to identify and assign using SIMS. Psl is an exopolysaccharide produced by Pseudomonas aeruginosa, which plays a key role in biofilm formation and maturation. In this Letter, we describe the use of the OrbiTrap analyzer with SIMS (3D OrbiSIMS) for the label-free mass spectrometry of Psl, taking advantage of its high mass resolving power for accurate secondary ion assignment. We study a P. aeruginosa biofilm and compare it with purified Psl to enable the assignment of secondary ions specific to the Psl structure. This resulted in the identification of 17 peaks that could confidently be ascribed to Psl fragments within the biofilm matrix. The complementary approach of the following neutral loss sequences is also shown to identify multiple oligosaccharide fragments without the requirement of a biological reference s le.
Publisher: Springer New York
Date: 2014
Publisher: Wiley
Date: 08-03-2012
DOI: 10.1002/SIA.4910
Publisher: IEEE
Date: 06-2010
Publisher: Elsevier BV
Date: 09-2014
DOI: 10.1016/J.JCONREL.2014.06.045
Abstract: Using microarray technologies thousands of biomedical materials can be screened in a rapid, parallel and cost effective fashion to identify the optimum candidate that fulfils a specific biomedical application. High throughput surface characterization (HTSC) of printed microarrays has played a key role in the discovery and development of biomedical materials. This review focuses on the production and HTSC of microarrays, their application in specific biomedical fields and a future perspective on the development of this technology.
Publisher: American Society for Microbiology
Date: 29-10-2019
DOI: 10.1128/MSYSTEMS.00390-19
Abstract: We have established a methodology to enable the movement of in idual bacterial cells to be followed within a 3D space without requiring any labeling. Such an approach is important to observe and understand how bacteria interact with surfaces and form biofilm. We investigated the swimming behavior of Pseudomonas aeruginosa , which has two flagellar stators that drive its swimming motion. Mutants that had only either one of the two stators swam slower and were unable to adjust to the near-surface environment as effectively as the wild type. These results are consistent with the mot stators playing key roles in responding to the near-surface environment and could be used by bacteria to sense via their flagella when they are near a surface.
Publisher: Elsevier BV
Date: 09-2014
Publisher: Royal Society of Chemistry (RSC)
Date: 2020
DOI: 10.1039/D0BM00709A
Abstract: Silicone catheters impregnated with antibiotics and coated with an anti-attachment polyacrylate produce a device with dual anti-biofilm and anti-bacterial properties.
Publisher: Springer Science and Business Media LLC
Date: 06-2014
DOI: 10.1038/NBT0614-592C
Publisher: Springer Science and Business Media LLC
Date: 12-08-2012
DOI: 10.1038/NBT.2316
Publisher: American Chemical Society (ACS)
Date: 04-2020
Publisher: Royal Society of Chemistry (RSC)
Date: 2012
DOI: 10.1039/C2JM34782B
Location: United Kingdom of Great Britain and Northern Ireland
No related grants have been discovered for Andrew Hook.