ORCID Profile
0000-0003-1711-8032
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: IOP Publishing
Date: 18-04-2013
Publisher: American Vacuum Society
Date: 05-2020
DOI: 10.1116/6.0000259
Abstract: The stable nitroxide radical TEMPO [(2,2,6,6-Tetramethylpiperidin-1-yl)oxyl] has a multitude of applications in fields ranging from energy storage to biomedical applications and many more. However, to date, the processes of incorporating nitroxide radicals into thin-film coatings are laborious and not cost-effective, which hinders their wider use in many applications. In contrast, the authors have recently demonstrated the facile method of plasma polymerization of TEMPO into thin-film coatings that retain the stable nitroxide radicals. In this work, we are using three types of mass spectroscopic methods (plasma-mass spectrometry, time of flight secondary ion mass spectrometry, and high-performance liquid chromatography-mass spectrometry) and electron spin resonance to track the fate of the TEMPO molecule from monomer flask through the plasma and inside the resulting coatings. The results of this study demonstrate that TEMPO is a versatile monomer that can be used across different plasma reactors and reliably retain the stable nitroxide radical in the resulting thin-film coatings if certain process conditions are observed, namely, higher process pressures and lower powers.
Publisher: Wiley
Date: 05-03-2012
Publisher: SPIE
Date: 21-12-2011
DOI: 10.1117/12.903293
Publisher: Royal Society of Chemistry (RSC)
Date: 2011
DOI: 10.1039/C0LC00339E
Abstract: A rapid, high-precision method for localised plasma-treatment of bonded PDMS microchannels is demonstrated. Patterned electrodes were prepared by injection of molten gallium into preformed microchannel guides. The electrode guides were prepared without any additional fabrication steps compared to conventional microchannel fabrication. Alignment of the "injected" electrodes is precisely controlled by the photomask design, rather than positioning accuracy of alignment tools. Surface modification is detected using a fluorescent dye (Rhodamine B), revealing a well-defined micropattern with regions less than 100 µm along the length of the microchannel.
Publisher: Wiley
Date: 18-10-2006
DOI: 10.1002/SIA.2387
Publisher: American Astronomical Society
Date: 30-11-2018
Publisher: Wiley
Date: 14-01-2014
Publisher: American Chemical Society (ACS)
Date: 29-04-2009
DOI: 10.1021/LA900334W
Publisher: Wiley
Date: 06-12-2010
Publisher: American Society for Microbiology
Date: 10-2009
DOI: 10.1128/AAC.01704-08
Abstract: Brominated furanones from marine algae inhibit multicellular behaviors of gram-negative bacteria such as biofilm formation and quorum sensing (QS) without affecting their growth. The interaction of furanone with QS in gram-positive bacteria is unknown. Staphylococci have two QS systems, agr and luxS , which lower biofilm formation by two different pathways, RNAIII upregulation and bacterial detachment, and polysaccharide intercellular adhesin (PIA) reduction, respectively. We synthesized natural furanone compound 2 [(5 Z )-4-bromo-5-(bromomethylene)-3-butyl-2(5 H )-furanone] from Delisea pulchra and three analogues to investigate their effect on biofilm formation in gram-positive bacteria. Compound 2, but not the analogues, enhanced the biofilms of Staphylococcus epidermidis 1457 and 047 and of S. aureus Newman at concentrations between 1.25 and 20 μM. We show the growth inhibition of S. epidermidis and S. aureus by free furanone and demonstrate bactericidal activity. An induction of biofilm occurred at concentrations of 10 to 20% of the MIC and correlated with an increase in PIA. The biofilm effect was agr independent. It was due to interference with luxS , as shown by reduced luxS expression in the presence of compound 2 and independence of the strong biofilm formation in a luxS mutant upon furanone addition. Poly( l -lysine)-grafted oly(ethylene glycol)-grafted furanone was ineffective on biofilm and not bactericidal, indicating the necessity for free furanone. Free furanone was similarly toxic for murine fibroblasts as for staphylococci, excluding a therapeutic application of this compound. In summary, we observed a biofilm enhancement by furanone in staphylococci at subinhibitory concentrations, which was manifested by an increase in PIA and dependent on luxS .
Publisher: Royal Society of Chemistry (RSC)
Date: 2013
DOI: 10.1039/C3RA42025F
Publisher: Elsevier BV
Date: 04-2010
Publisher: Oxford University Press (OUP)
Date: 09-2013
DOI: 10.1093/JRS/FET021
Publisher: American Chemical Society (ACS)
Date: 13-02-2013
DOI: 10.1021/LA304713B
Abstract: It has been shown that both ions and neutral species may contribute to plasma polymer growth. However, the relative contribution from these mechanisms remains unclear. We present data elucidating the importance of considering monomer structure with respect to which the growth mechanism dominates for nonfouling PEG-like plasma polymers. The deposition rate for saturated monomers is directly linked with ion flux to the substrate. For unsaturated monomers, the neutral flux also plays a role, particularly at low power. Increased fragmentation of the monomer at high power reduces the ability of unsaturated monomers to grow via neutral grafting. Chemical characterization by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) confirm the role that plasma phase fragmentation plays in determining the deposition rate and surface chemistry of the deposited film. The simple experimental method used here may also be used to determine which mechanisms dominate plasma deposition for other monomers. This knowledge may enable significant improvement in future reactor design and process control.
Publisher: American Chemical Society (ACS)
Date: 21-06-2012
DOI: 10.1021/AM300621K
Abstract: We describe a pH responsive drug delivery system which was fabricated using a novel approach to functionalize biodegradeable porous silicon (pSi) by initiated chemical vapor deposition (iCVD). The assembly involved first loading a model drug (c tothecin, CPT) into the pores of the pSi matrix followed by capping the pores with a thin pH responsive copolymer film of poly(methacrylic acid-co-ethylene dimethacrylate) (p(MAA-co-EDMA)) via iCVD. Release of CPT from uncoated pSi was identical in two buffers at pH 1.8 and pH 7.4. In contrast, the linear release rate of CPT from the pSi matrix with the p(MAA-co-EDMA) coating was dependent on the pH release of CPT was more than four times faster at pH 7.4 (13.1 nmol/(cm(2) h)) than at pH 1.8 (3.0 nmol/(cm(2) h)). The key advantage of this drug delivery approach over existing ones based on pSi is that the iCVD coating can be applied to the pSi matrix after drug loading without degradation of the drug because the process does not expose the drug to harmful solvents or high temperatures and is independent of the surface chemistry and pore size of the nanoporous matrix.
Publisher: AIP Publishing
Date: 2015
DOI: 10.1063/1.4913367
Abstract: Spatially varied surface treatment of a fluorescently labeled Bovine Serum Albumin (BSA) protein, on the walls of a closed (sealed) microchannel is achieved via a well-defined gradient in plasma intensity. The microchips comprised a microchannel positioned in-between two microelectrodes (embedded in the chip) with a variable electrode separation along the length of the channel. The channel and electrodes were 50 μm and 100 μm wide, respectively, 50 μm deep, and adjacent to the channel for a length of 18 mm. The electrode separation distance was varied linearly from 50 μm at one end of the channel to a maximum distance of 150, 300, 500, or 1000 μm to generate a gradient in helium plasma intensity. Plasma ignition was achieved at a helium flow rate of 2.5 ml/min, 8.5 kVpk-pk, and 10 kHz. It is shown that the plasma intensity decreases with increasing electrode separation and is directly related to the residual amount of BSA left after the treatment. The plasma intensity and surface protein gradient, for the different electrode gradients studied, collapse onto master curves when plotted against electrode separation. This precise spatial control is expected to enable the surface protein gradient to be tuned for a range of applications, including high-throughput screening and cell-biomolecule-biomaterial interactions.
Publisher: American Chemical Society (ACS)
Date: 15-12-2007
DOI: 10.1021/AC701720Y
Abstract: Furanone compounds (fimbrolides) have attracted interest as antibacterial compounds for use in human health care, for instance, as an antibacterial coating for medical devices to combat device-centered infections. To ensure effectiveness for extended periods of time, they must be immobilized covalently onto a device surface in this study, this was done via azide/nitrene chemistry and photochemical coupling. However, the detection and quantification of surface-immobilized small molecules such as furanones presents a considerable analytical challenge, yet is necessary for optimization of coatings and reliable interpretation of biological responses. We have utilized the surface sensitivity and chemical specificity of time-of-flight secondary ion mass spectrometry (TOF-SIMS) to characterize each step of the grafting sequence. On account of the complexity of the data, principal component analysis (PCA) was used to interpret and compare spectra. The results demonstrate the utility of TOF-SIMS with PCA for the detection of the surface-grafted small molecules azidoaniline and a brominated furanone imaging of the bromine ion peaks also enabled assessment of grafting uniformity. Thus, successful multilayer coating and furanone grafting was observed, and substantial and uniform coverage of furanone molecules on the surface. Even multiple grafting steps involving, in the present case, two low molecular weight compounds can readily be disentangled by PCA. The utility of TOF-SIMS analysis with PCA is particularly well illustrated in the present case by the grafting of the furanone molecules, which did not yield a singular unique peak in the positive ion mass spectra, whereas the collective spectral changes elucidated by PCA provided unambiguous verification of successful grafting of this low molecular weight compound.
Publisher: Elsevier BV
Date: 02-2006
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C5TB00397K
Abstract: Infliximab antibodies released from porous silicon microparticles can sequester the proinflammatory cytokine, tumor necrosis factor-α (TNF-α), which is elevated in uveitis and non-healing chronic wounds.
Publisher: SPIE
Date: 21-12-2011
DOI: 10.1117/12.903304
Publisher: Elsevier BV
Date: 12-2023
Publisher: Wiley
Date: 27-05-2015
Abstract: Active dressings that based on fabric materials are an area of interest for the treatment of wounds. Poly(l-lactide) nanoparticles containing the antimicrobial agent octenidine can be controllably lysed by toxins released by pathogenic bacteria thus releasing antimicrobial material in response to the presence of the bacterial toxins and so counteracting the infection. We developed an integrated engineering solution that allows for the stable immobilisation of nanoparticles on non-woven fabrics. The process involves coating nanoparticles on non-woven polymer surfaces by using an inkjet printing process. In order to improve the adhesion and retention of the nanoparticles on the fabric, surface pretreatment of the non-woven fabric using plasma jet treatment can be applied to increase its surface energy.
Publisher: Wiley
Date: 11-08-2011
Publisher: Wiley
Date: 10-2019
Publisher: Wiley
Date: 08-2019
Publisher: Springer Science and Business Media LLC
Date: 14-12-2013
DOI: 10.1007/S00216-013-7537-2
Abstract: Understanding of the interfacial chemistry of ultrathin polymeric adlayers is fundamentally important in the context of establishing quantitative design rules for the fabrication of nonfouling surfaces in various applications such as biomaterials and medical devices. In this study, seven poly(L-lysine)-graft-poly(2-methyl-2-oxazoline) (PLL-PMOXA) copolymers with grafting density (number of PMOXA chains per lysine residue) 0.09, 0.14, 0.19, 0.33, 0.43, 0.56, and 0.77, respectively, were synthesized and characterized by means of nuclear magnetic resonance spectroscopy (NMR). The copolymers were then adsorbed on Nb2O5 surfaces. Optical waveguide lightmode spectroscopy method was used to monitor the surface adsorption in situ of these copolymers and provide information on adlayer masses that were then converted into PLL and PMOXA surface densities. To investigate the relationship between copolymer bulk architecture (as shown by NMR data) and surface coverage as well as surface architecture, time-of-flight secondary ion mass spectrometry (ToF-SIMS) analysis was performed. Furthermore, ToF-SIMS method combined with principal component analysis (PCA) was used to verify the protein resistant properties of PLL-PMOXA adlayers, by thorough characterization before and after adlayer exposure to human serum. ToF-SIMS analysis revealed that the chemical composition as well as the architecture of the different PLL-PMOXA adlayers indeed reflects the copolymer bulk composition. ToF-SIMS results also indicated a heterogeneous surface coverage of PLL-PMOXA adlayers with high grafting densities higher than 0.33. In the case of protein resistant surface, PCA results showed clear differences between protein resistant and nonprotein-resistant surfaces. Therefore, ToF-SIMS results combined with PCA confirmed that the PLL-PMOXA adlayer with brush architecture resists protein adsorption. However, low increases of some amino acid signals in ToF-SIMS spectra were detected after the adlayer has been exposed to human serum.
Location: Switzerland
No related grants have been discovered for Sameer Al-Bataineh.