ORCID Profile
0000-0001-6844-7720
Current Organisation
Macquarie University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Wiley
Date: 27-11-2021
Abstract: The surface chemistry of colloidal quantum dots (CQD) play a crucial role in fabricating highly efficient and stable solar cells. However, as‐synthesized PbS CQDs are significantly off‐stoichiometric and contain inhomogeneously distributed S and Pb atoms at the surface, which results in undercharged Pb atoms, dangling bonds of S atoms and uncapped sites, thus causing surface trap states. Moreover, conventional ligand exchange processes cannot efficiently eliminate these undesired atom configurations and defect sites. Here, potassium triiodide (KI 3 ) additives are combined with conventional PbX 2 matrix ligands to simultaneously eliminate the undercharged Pb species and dangling S sites via reacting with molecular I 2 generated from the reversible reaction KI 3 ⇌ I 2 + KI. Meanwhile, high surface coverage shells on PbS CQDs are built via PbX 2 and KI ligands. The implementation of KI 3 additives remarkably suppresses the surface trap states and enhances the device stability due to the surface chemistry optimization. The resultant solar cells achieve the best power convention efficiency of 12.1% and retain 94% of its initial efficiency under 20 h continuous operation in air, while the control devices with KI additive deliver an efficiency of 11.0% and retains 87% of their initial efficiency under the same conditions.
Publisher: Wiley
Date: 03-05-2021
Abstract: Organic–inorganic mixed halide perovskites have emerged as an excellent class of materials with a unique combination of optoelectronic properties, suitable for a plethora of applications ranging from solar cells to light‐emitting diodes and photoelectrochemical devices. Recent works have showcased hybrid perovskites for electronic applications through improvements in materials design, processing, and device stability. Herein, a comprehensive up‐to‐date review is presented on hybrid perovskite electronics with a focus on transistors and memories. These applications are supported by the fundamental material properties of hybrid perovskite semiconductors such as tunable bandgap, ambipolar charge transport, reasonable mobility, defect characteristics, and solution processability, which are highlighted first. Then, recent progresses on perovskite‐based transistors are reviewed, covering aspects of fabrication process, patterning techniques, contact engineering, 2D versus 3D material selection, and device performance. Furthermore, applications of perovskites in nonvolatile memories and artificial synaptic devices are presented. The ambient instability of hybrid perovskites and the strategies to tackle this bottleneck are also discussed. Finally, an outlook and opportunities to develop perovskite‐based electronics as a competitive and feasible technology are highlighted.
Publisher: IEEE
Date: 06-2017
Publisher: American Association for the Advancement of Science (AAAS)
Date: 19-06-2020
Abstract: Solar cells are subject to heating when operating in sunlight, and the organic components of hybrid perovskite solar cells, especially the commonly used methylammonium cation, can undergo thermal decomposition. Encapsulation can limit decomposition by bringing such reactions to equilibrium and can prevent exposure to damaging ambient moisture. Shi et al. examined several encapsulation schemes for perovskite films and devices by probing volatile products with gas chromatography–mass spectrometry (see the Perspective by Juarez-Perez and Haro). Pressure-tight polymer/glass stack encapsulation was effective in suppressing gas transfer and allowed solar cells containing methylammonium to pass harsh moisture and thermal cycling tests. Science , this issue p. eaba2412 see also p. 1309
Publisher: IOP Publishing
Date: 30-12-2014
DOI: 10.1088/0957-4484/26/3/035401
Abstract: Here, we demonstrated the quantum heterojunction colloidal quantum dot (CQD) solar cells employing the PbS CQDs/Cd3P2 CQDs architecture in which both the p-type PbS and n-type Cd3P2 CQD layers are quantum-tunable and solution-processed light absorbers. We synthesized well-crystallized and nearly monodispersed tetragonal Cd3P2 CQDs and then engineered their energy band alignment with the p-type PbS by tuning the dot size and hence the bandgap to achieve efficient light absorbing and charge separation. We further optimized the device through the Ag-doping strategy of PbS CQDs that may leverage an expanded depletion region in the n-layer, which greatly enhances the photocurrent. The resulting devices showed an efficiency of 1.5%.
Publisher: Wiley
Date: 29-10-2020
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C7TC05366E
Abstract: Solar cells fabricated using modified AgBiS 2 nanocrystals achieved a PCE of 4.3%, which is a 30% improvement compared with conventional AgBiS 2 nanocrystal solar cells.
Publisher: American Chemical Society (ACS)
Date: 29-04-2020
Publisher: Springer Science and Business Media LLC
Date: 20-01-2021
DOI: 10.1038/S41467-020-20749-1
Abstract: All-inorganic CsPbI 3 perovskite quantum dots have received substantial research interest for photovoltaic applications because of higher efficiency compared to solar cells using other quantum dots materials and the various exciting properties that perovskites have to offer. These quantum dot devices also exhibit good mechanical stability amongst various thin-film photovoltaic technologies. We demonstrate higher mechanical endurance of quantum dot films compared to bulk thin film and highlight the importance of further research on high-performance and flexible optoelectronic devices using nanoscale grains as an advantage. Specifically, we develop a hybrid interfacial architecture consisting of CsPbI 3 quantum dot/PCBM heterojunction, enabling an energy cascade for efficient charge transfer and mechanical adhesion. The ch ion CsPbI 3 quantum dot solar cell has an efficiency of 15.1% (stabilized power output of 14.61%), which is among the highest report to date. Building on this strategy, we further demonstrate a highest efficiency of 12.3% in flexible quantum dot photovoltaics.
Publisher: Wiley
Date: 06-11-2018
Publisher: American Chemical Society (ACS)
Date: 25-05-2022
Publisher: American Chemical Society (ACS)
Date: 28-07-2020
Publisher: Elsevier BV
Date: 06-2022
Publisher: Springer Science and Business Media LLC
Date: 29-12-2023
DOI: 10.1007/S40820-022-00983-6
Abstract: Metal halide perovskites have generated significant attention in recent years because of their extraordinary physical properties and photovoltaic performance. Among these, inorganic perovskite quantum dots (QDs) stand out for their prominent merits, such as quantum confinement effects, high photoluminescence quantum yield, and defect-tolerant structures. Additionally, ligand engineering and an all-inorganic composition lead to a robust platform for ambient-stable QD devices. This review presents the state-of-the-art research progress on inorganic perovskite QDs, emphasizing their electronic applications. In detail, the physical properties of inorganic perovskite QDs will be introduced first, followed by a discussion of synthesis methods and growth control. Afterwards, the emerging applications of inorganic perovskite QDs in electronics, including transistors and memories, will be presented. Finally, this review will provide an outlook on potential strategies for advancing inorganic perovskite QD technologies.
Publisher: American Chemical Society (ACS)
Date: 04-2022
Abstract: Metallic 1T-phase MoS
Publisher: American Chemical Society (ACS)
Date: 04-11-2015
Abstract: Organometal halide perovskites have recently emerged as outstanding semiconductors for solid-state optoelectronic devices. Their sensitivity to moisture is one of the biggest barriers to commercialization. In order to identify the effect of moisture in the degradation process, here we combined the in situ electrical resistance measurement with time-resolved X-ray diffraction analysis to investigate the interaction of CH3NH3PbI(3-x)Cl(x) perovskite films with moisture. Upon short-time exposure, the resistance of the perovskite films decreased and it could be fully recovered, which were ascribed to a mere chemisorption of water molecules, followed by the reversible hydration into CH3NH3PbI(3-x)Cl(x)·H2O. Upon long-time exposure, however, the resistance became irreversible due to the decomposition into PbI2. The results demonstrated the formation of monohydrated intermediate phase when the perovskites interacted with moisture. The role of moisture in accelerating the thermal degradation at 85 °C was also demonstrated. Furthermore, our study suggested that the perovskite films with fewer defects may be more inherently resistant to moisture.
Publisher: Elsevier BV
Date: 07-2020
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C8CE00728D
Abstract: Improvements in charge carrier transport and equivalent photoluminescence were obtained for CuInS 2 nanoparticles with Ag-surface termination in photovoltaic devices.
Publisher: Wiley
Date: 16-10-2017
Publisher: Royal Society of Chemistry (RSC)
Date: 2023
DOI: 10.1039/D3TA00318C
Abstract: Novel structured thiadiazole-attached carbon nitrides are first synthesized via sintering 5-amino-1,3,4-thiadiazole-2-thiol, demonstrating excellent performances towards photocatalytic H 2 evolution under visible light irradiation.
Publisher: Informa UK Limited
Date: 13-07-2022
Publisher: Royal Society of Chemistry (RSC)
Date: 2016
DOI: 10.1039/C5NR09069E
Abstract: Traditional photoconductive photodetectors (PDs) commonly respond to higher energy photons compared with the bandgaps of PD active materials. Different from the wide detection spectra of traditional PDs, the present reported PbS quantum dot (QD) PDs can detect the spectra-selective light source. Spectra-selective PDs (ss-PDs) of perovskite/QDs and QD/QDs were respectively implemented by integrating two functional layers. The top layer (facing the light) was utilized to filter the non-target spectra and the bottom layer was used for detection. The response spectrum wavelength and the range of ss-PDs can be conveniently tailored by tuning the QD size. The obtained selectivity factor and normalized detectivity ratio from target and non-target illumination can reach at least 10. A narrow detection range with a full width at half maximum (FWHM) ∼100 nm was applied by typical QD/QD based ss-PDs. The prototype ss-PDs were successfully applied in identifying an unknown light source. The convenient tuning and identification capabilities of the present QD based ss-PDs may provide a versatile route to obtain highly spectrum-selective PDs in order to meet the demands for special fields.
Publisher: IEEE
Date: 06-2018
Publisher: Wiley
Date: 22-01-2014
Abstract: A gas sensor based on PbS colloidal quantum dots (CQDs) is constructed on a paper substrate, yielding flexible, rapid-response NO₂ gas sensors, fabricated from the solution phase. The devices are highly sensitive and fully recoverable at room temperature, which is attributed to the excellent access of gas molecules to the CQD surface, realized by surface ligand removal, combined with the desirable binding energy of NO₂ with the PbS CQDs.
Publisher: Elsevier BV
Date: 10-2021
Publisher: Wiley
Date: 04-12-2021
Abstract: The extraordinary electronic, optical, and mechanical characteristics of 2D materials make them promising candidates for optoelectronics, specifically in infrared (IR) detectors owing to their flexible composition and tunable optoelectronic properties. This review presents the recent progress in IR detectors composed of 2D materials and their hybrid structures, including graphene, black phosphorous, transition metal dichalcogenides, halide perovskite as well as other new layered materials and their heterostructures. The focus is on the short‐wave, mid‐wave, and long‐wave infrared regimes, which pose a grand challenge for rational materials and device designs. The dependence of the device performance on the optical and electronic properties of 2D materials is extensively discussed, aiming to present the general strategies for designing optoelectronic devices with optimal performance. Furthermore, the recent results on 2D material‐based heterostructures are presented with an emphasis on the relationship between band alignment, charge transfer, and IR photodetection. Finally, a summary is given as well as the discussion of existing challenges and future directions.
Publisher: Wiley
Date: 17-04-2021
Publisher: American Chemical Society (ACS)
Date: 27-10-2022
Publisher: Wiley
Date: 25-01-2023
Abstract: Solar‐driven photothermal water evaporation is considered an elegant and sustainable technology for freshwater production. The existing systems, however, often suffer from poor stability and biofouling issues, which severely h er their prospects in practical applications. Conventionally, photothermal materials are deposited on the membrane supports via vacuum‐assisted filtration or dip‐coating methods. Nevertheless, the weak inherent material‐membrane interactions frequently lead to poor durability, and the photothermal material layer can be easily peeled off from the hosting substrates or partially dissolved when immersed in water. In the present article, the discovery of the incorporation of borophene into cellulose nanofibers (CNF), enabling excellent environmental stability with a high light‐to‐heat conversion efficiency of 91.5% and water evaporation rate of 1.45 kg m −2 h −1 under simulated sunlight is reported. It is also demonstrated that borophene papers can be employed as an excellent active photothermal material for eliminating almost 100% of both gram‐positive and gram‐negative bacteria within 20 min under three sun irradiations. The result opens a new direction for the design of borophene‐based papers with unique photothermal properties which can be used for the effective treatment of a wide range of wastewaters.
Publisher: American Chemical Society (ACS)
Date: 09-07-2020
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C4TA04272G
Abstract: Planar heterojunction perovskite solar cells were constructed with PbS colloidal quantum dots (CQDs) as an effective hole transporter and we tuned the energy level of PbS CQDs to optimize the device performance.
Publisher: Elsevier BV
Date: 2022
Publisher: Wiley
Date: 22-04-2022
Abstract: Organic–inorganic hybrid lead halide perovskite solar cells have made unprecedented progress in improving photovoltaic efficiency during the past decade, while still facing critical stability challenges. Herein, the natural organic dye Indigo is explored for the first time to be an efficient molecular passivator that assists in the preparation of high‐quality hybrid perovskite film with reduced defects and enhanced stability. The Indigo molecule with both carbonyl and amino groups can provide bifunctional chemical passivation for defects. In‐depth theoretical and experimental studies show that the Indigo molecules firmly binds to the perovskite surfaces, enhancing the crystallization of perovskite films with improved morphology. Consequently, the Indigo‐passivated perovskite film exhibits increased grain size with better uniformity, reduced grain boundaries, lowered defect density, and retarded ion migration, boosting the device efficiency up to 23.22%, and ≈21% for large‐area device (1 cm 2 ). Furthermore, the Indigo passivation can enhance device stability in terms of both humidity and thermal stress. These results provide not only new insights into the multipassivation role of natural organic dyes but also a simple and low‐cost strategy to prepare high‐quality hybrid perovskite films for optoelectronic applications based on Indigo derivatives.
Publisher: IOP Publishing
Date: 24-12-2019
Abstract: The unique tunable bandgaps and straightforward synthesis of colloidal quantum dots make them promising low-cost materials for photovoltaics. High-performance colloidal quantum dot solar cells rely on good-quality electron transporting layers (ETLs) to make carrier selective contacts. Despite extensive use of n-type oxides as ETLs, a detailed understanding of their surface and interface states as well as mechanisms to improve their optical properties are still under development. Here, we report a simple procedure to produce MgCl
Publisher: Elsevier BV
Date: 03-2020
Publisher: Elsevier BV
Date: 2022
Publisher: American Chemical Society (ACS)
Date: 15-09-2020
Publisher: Springer Science and Business Media LLC
Date: 11-05-2022
DOI: 10.1038/S41586-022-04588-2
Abstract: The scaling of silicon metal-oxide-semiconductor field-effect transistors has followed Moore's law for decades, but the physical thinning of silicon at sub-ten-nanometre technology nodes introduces issues such as leakage currents
Publisher: Elsevier BV
Date: 12-2022
DOI: 10.1016/J.JCIS.2022.08.061
Abstract: Ni-rich layered oxides, such as LiNi
Publisher: Elsevier BV
Date: 04-2018
Publisher: American Chemical Society (ACS)
Date: 24-09-2020
Publisher: American Chemical Society (ACS)
Date: 06-12-2021
Publisher: Wiley
Date: 22-09-2022
Abstract: Power generation by converting energy from the ambient environment has been considered a promising strategy for developing decentralized electrification systems to complement the electricity supply for daily use. Wet gases, such as water evaporation or moisture in the atmosphere, can be utilized as a tremendous source of electricity by emerging power generation devices, that is, moisture‐enabled‐electric nanogenerators (MEENGs). As a promising technology, MEENGs provided a novel manner to generate electricity by harvesting energy from moisture, originating from the interactions between water molecules and hydrophilic functional groups. Though the remarkable progress of MEENGs has been achieved, a systematic review in this specific area is urgently needed to summarize previous works and provide sharp points to further develop low‐cost and high‐performing MEENGs through overcoming current limitations. Herein, the working mechanisms of MEENGs reported so far are comprehensively compared. Subsequently, a systematic summary of the materials selection and fabrication methods for currently reported MEENG construction is presented. Then, the improvement strategies and development directions of MEENG are provided. At last, the demonstrations of the applications assembled with MEENGs are extracted. This work aims to pave the way for the further MEENGs to break through the performance limitations and promote the popularization of future micron electronic self‐powered equipment.
Publisher: American Chemical Society (ACS)
Date: 25-11-2015
Publisher: Wiley
Date: 05-02-2016
Publisher: American Chemical Society (ACS)
Date: 24-01-2018
Publisher: Wiley
Date: 28-04-2022
Abstract: Hybrid halide perovskites have emerged as highly promising photovoltaic materials because of their exceptional optoelectronic properties, which are often optimized via compositional engineering like mixing halides. It is well established that hybrid perovskites undergo a series of structural phase transitions as temperature varies. In this work, the authors find that phase transitions are substantially suppressed in mixed‐halide hybrid perovskite single crystals of MAPbI 3‐x Br x (MA = CH 3 NH 3 + and x = 1 or 2) using a complementary suite of diffraction and spectroscopic techniques. Furthermore, as a general behavior, multiple crystallographic phases coexist in mixed‐halide perovskites over a wide temperature range, and a slightly distorted monoclinic phase, hitherto unreported for hybrid perovskites, is dominant at temperatures above 100 K. The anomalous structural evolution is correlated with the glassy behavior of organic cations and optical phonons in mixed‐halide perovskites. This work demonstrates the complex interplay between composition engineering and lattice dynamics in hybrid perovskites, shedding new light on their unique properties.
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C8TC06495D
Abstract: PbSe quantum dots are mixed into PbS quantum dots to form mixed quantum dots for enhancing device performance in optoelectronic applications due to improved charge mobility in solid films.
Publisher: Wiley
Date: 17-03-2023
Abstract: Artificial perception technologies capable of sensing and feeling mechanical stimuli like human skins are critical enablers for electronic skins (E‐Skins) needed to achieve artificial intelligence. However, most of the reported electronic skin systems lack the capability to process and interpret the sensor data. Herein, a new design of artificial perceptual system integrating ZnO‐based synaptic devices with Pt/carbon nanofibers‐based strain sensors for stimuli detection and information processing is presented. Benefiting from the controllable ion migration after indium doping, the device can emulate various essential functions, such as short‐term/long‐term plasticity, paired‐pulse facilitation, excitatory post‐synaptic current, and synaptic plasticity depending on the number, frequency, litude, and width of the applied pulses. The Pt/carbon nanofibers‐based strain sensors can detect subtle human motion and convert mechanical stimuli into electrical signals, which are further processed by the ZnO devices. By attaching the integrated devices to finger joints, it is demonstrated that they can recognize handwriting and gestures with a high accuracy. This work offers new insights in designing artificial synapses and sensors to process and recognize information for neuromorphic computing and artificial intelligence applications.
Publisher: Wiley
Date: 10-2015
Publisher: Wiley
Date: 05-01-2022
Abstract: Integrating multiple semiconductors with distinct physical properties is a practical design strategy for realizing novel optoelectronic devices with unprecedented functionalities. In this work, a photonic resistive switching (RS) memory is demonstrated based on solution‐processed bilayers of strontium titanate (SrTiO 3 or STO) quantum dots (QDs) and all‐inorganic halide perovskite CsPbBr 3 (CPB) with an Ag/STO/CPB/Au architecture. Compared with the single‐layer STO or CPB RS device, the double‐layer device shows considerably improved RS performance with a high switching ratio over 10 5 , an endurance of 3000 cycles, and a retention time longer than 2 × 10 4 s. The formation of heterojunction between STO and CPB significantly enhances the high resistance state, and the separation of the active silver electrode and the CPB layer contributes to the long‐term stability. More importantly, the photonic RS device exhibits UV–visible dual‐band response due to the photogating effect and the light‐induced modification of the heterojunction barrier. Last, tri‐mode operation, i.e., photodetector, memory, and photomemory, is demonstrated via tailoring the light and electric stimuli. This bilayer device architecture provides a unique approach toward enhancing the performance of photoresponsive data‐storage devices.
Publisher: Elsevier BV
Date: 10-2019
Publisher: Wiley
Date: 23-11-2023
Abstract: Solution processable semiconductors like organics and emerging lead halide perovskites (LHPs) are ideal candidates for photovoltaics combining high performance and flexibility with reduced manufacturing cost. Moreover, the study of hybrid semiconductors would lead to advanced structures and deep understanding that will propel this field even further. Herein, a novel device architecture involving block copolymer erovskite hybrid bulk heterointerfaces is investigated, such a modification could enhance light absorption, create an energy level cascade, and provides a thin hydrophobic layer, thus enabling enhanced carrier generation, promoting energy transfer and preventing moisture invasion, respectively. The resulting hybrid block copolymer erovskite solar cell exhibits a ch ion efficiency of 24.07% for 0.0725 cm 2 ‐sized devices and 21.44% for 1 cm 2 ‐sized devices, respectively, together with enhanced stability, which is among the highest reports of organic erovskite hybrid devices. More importantly, this approach has been effectively extended to other LHPs with different chemical compositions like MAPbI 3 and CsPbI 3 , which may shed light on the design of highly efficient block copolymer erovskite hybrid materials and architectures that would overcome current limitations for realistic application exploration.
Publisher: Wiley
Date: 02-06-2020
Publisher: American Chemical Society (ACS)
Date: 19-12-2022
Publisher: Wiley
Date: 21-08-2022
Abstract: Metal‐halide perovskites have drawn profuse attention during the past decade, owing to their excellent electrical and optical properties, facile synthesis, efficient energy conversion, and so on. Meanwhile, the development of information storage technologies and digital communications has fueled the demand for novel semiconductor materials. Low‐dimensional perovskites have offered a new force to propel the developments of the memory field due to the excellent physical and electrical properties associated with the reduced dimensionality. In this review, the mechanisms, properties, as well as stability and performance of low‐dimensional perovskite memories, involving both molecular‐level perovskites and structure‐level nanostructures, are comprehensively reviewed. The property–performance correlation is discussed in‐depth, aiming to present effective strategies for designing memory devices based on this new class of high‐performance materials. Finally, the existing challenges and future opportunities are presented.
Publisher: Wiley
Date: 27-10-2022
Abstract: All‐inorganic CsPbX 3 (X = Cl, Br, I, or mixed halides) perovskite quantum dots (QDs) exhibit tunable optical bandgaps and narrow emission peaks, which have received worldwide interest in the field of both photovoltaics (PVs) and light‐emitting diodes (LEDs). Herein, it is reported a discovery that CsPbI 3 perovskite QD solar cell can simultaneously deliver high PV performance and intense electroluminescence. In specific, the multifunctional CsPbI 3 QD film is fabricated through a simple yet efficient solid‐state‐ligand exchange process using a tailored organic ligand triphenyl phosphite (TPPI). The function of QD surface manipulation using TPPI here is proven to be twofold, balancing the carrier transport and effectively passivating the QD surface to produce conductive and emissive QD film. The CsPbI 3 perovskite QD solar cell delivers a ch ion efficiency of 15.21% with improved open circuit voltage and high fill factor. Concurrently functioning as a red LED, the CsPbI 3 perovskite QD solar cell outputs electric power to light conversion efficiency approaching 4%, a record value for QD electroluminescent PVs. The results here indicate that these versatile perovskite QDs may be a promising candidate for fabricating multifunctional optoelectronic devices.
Publisher: Springer Science and Business Media LLC
Date: 04-01-2017
Publisher: American Chemical Society (ACS)
Date: 04-2021
Publisher: American Chemical Society (ACS)
Date: 03-04-2020
Publisher: American Chemical Society (ACS)
Date: 18-09-2020
Publisher: Wiley
Date: 04-07-2022
Abstract: Ruddlesden–Popper phase 2D perovskite solar cells (PSCs) exhibit improved lifetime while still facing challenges such as phase alignment and up‐scaling to module‐level devices. Herein, polyelectrolytes are explored to tackle this issue. The contact between perovskite and hole‐transport layer (HTL) is important for decreasing interfacial non‐radiative recombination and scalable fabrication of uniform 2D perovskite films. Through exploring compatible butylamine cations, we first demonstrate poly(3‐(4‐carboxybutyl)thiophene‐2,5‐diyl)‐butylamine (P3CT‐BA) as an efficient HTL for 2D PSCs due to its great hydrophilicity, relatively high hole mobility and uniform surface. More importantly, the tailored P3CT‐BA has an anchoring effect and acts as the buried passivator for 2D perovskites. Consequently, a best efficiency approaching 18 % was achieved and we further first report large‐area (2×3 cm 2 , 5×5 cm 2 ) 2D perovskite minimodules with an impressive efficiency of 14.81 % and 11.13 %, respectively.
Publisher: Elsevier BV
Date: 10-2015
Publisher: Optica Publishing Group
Date: 30-10-2020
DOI: 10.1364/PRJ.402411
Abstract: Halide perovskites, such as methylammonium lead halide perovskites ( MAPbX 3 , X = I , Br, and Cl), are emerging as promising candidates for a wide range of optoelectronic applications, including solar cells, light-emitting diodes, and photodetectors, due to their superior optoelectronic properties. All-inorganic lead halide perovskites CsPbX 3 are attracting a lot of attention because replacing the organic cations with Cs + enhances the stability, and its halide-mixing derivatives offer broad bandgap tunability covering nearly the entire visible spectrum. However, there is evidence suggesting that the optical properties of mixed-halide perovskites are influenced by phase segregation under external stimuli, especially illumination, which may negatively impact the performance of optoelectronic devices. It is reported that the mixed-halide perovskites in forms of thin films and nanocrystals are segregated into a low-bandgap I-rich phase and a high-bandgap Br-rich phase. Herein, we present a critical review on the synthesis and basic properties of all-inorganic perovskites, phase-segregation phenomena, plausible mechanisms, and methods to mitigate phase segregation, providing insights on advancing mixed-halide perovskite optoelectronics with reliable performance.
Publisher: Elsevier BV
Date: 04-2022
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C7TA11154A
Abstract: Partial replacement of Pb in CsPbI 3 perovskite solar cells with Ca enhances power conversion efficiency to 13.5% under reverse scan (stabilised at 13.3%), without sacrificing stability.
Publisher: Wiley
Date: 16-11-2022
Abstract: In spite of the merits such as Earth abundance and high performance, Cu 2 ZnSn(S,Se) 4 (CZTSSe) solar cells suffer from unfavorable Sn Zn antisite defects and complexes, which act as nonradiative recombination centers and deteriorate the open‐circuit voltage ( V OC ). Therefore, the management of Sn composition is the prerequisite for achieving high‐efficiency CZTSSe photovoltaic devices. At present, the Sn‐related composition and defect modifications at different selenization pressures remain unclear, which restrain the development of efficient kesterite solar cells. Herein, a facile yet effective strategy to accurately adjust the Sn content in CZTSSe films by simply optimizing the selenization pressure is demonstrated. Compared with the widely used atmospheric pressure, it is unveiled that the appropriate negative pressure (0.7 atm) can tailor the optimal Sn content in the absorber layer, influencing both the Sn‐related defects and the microstructures. In contrast, a lower (0.4 atm) and a higher (1.3 atm) selenization pressure results in undesirable deep Cu Sn defects and a Sn(S,Se) 2 secondary phase, respectively. A ch ion device fabricated at this optimal selenization pressure (0.7 atm) exhibits a power conversion efficiency of 11.32% with a V OC of 0.496 V. This study paves the path toward highly efficient kesterite solar cells by tailoring the composition‐dependent defects.
Publisher: American Chemical Society (ACS)
Date: 20-10-2016
Publisher: Wiley
Date: 19-04-2021
Abstract: Organic‐inorganic hybrid film using conjugated materials and quantum dots (QDs) are of great interest for solution‐processed optoelectronic devices, including photovoltaics (PVs). However, it is still challenging to fabricate conductive hybrid films to maximize their PV performance. Herein, for the first time, superior PV performance of hybrid solar cells consisting of CsPbI 3 perovskite QDs and Y6 series non‐fullerene molecules is demonstrated and further highlights their importance on hybrid device design. In specific, a hybrid active layer is developed using CsPbI 3 QDs and non‐fullerene molecules, enabling a type‐II energy alignment for efficient charge transfer and extraction. Additionally, the non‐fullerene molecules can well passivate the QDs, reducing surface defects and energetic disorder. The ch ion CsPbI 3 QD/Y6‐F hybrid device has a record‐high efficiency of 15.05% for QD/organic hybrid PV devices, paving a new way to construct solution‐processable hybrid film for efficient optoelectronic devices.
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C8EE00689J
Abstract: A simple and scalable interface-layer free monolithic perovskite/silicon tandem has been demonstrated achieving over 20% efficiency on a large area.
Publisher: American Chemical Society (ACS)
Date: 26-09-2014
DOI: 10.1021/PH500227U
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C9TC03259B
Abstract: A novel interface-management strategy has been developed. Benefiting from optimized energy level alignment and interface contact, the Ca(acac) 2 -based layer significantly enhances the performance of PSCs, yielding an impressive efficiency of 20.15%.
Publisher: Wiley
Date: 11-03-2022
Abstract: Contact engineering is a prerequisite for achieving desirable functionality and performance of semiconductor electronics, which is particularly critical for organic–inorganic hybrid halide perovskites due to their ionic nature and highly reactive interfaces. Although the interfaces between perovskites and charge‐transporting layers have attracted lots of attention due to the photovoltaic and light‐emitting diode applications, achieving reliable perovskite/electrode contacts for electronic devices, such as transistors and memories, remains as a bottleneck. Herein, a critical review on the elusive nature of perovskite/electrode interfaces with a focus on the interfacial electrochemistry effects is presented. The basic guidelines of electrode selection are given for establishing non‐polarized interfaces and optimal energy level alignment for perovskite materials. Furthermore, state‐of‐the‐art strategies on interface‐related electrode engineering are reviewed and discussed, which aim at achieving ohmic transport and eliminating hysteresis in perovskite devices. The role and multiple functionalities of self‐assembled monolayers that offer a unique approach toward improving perovskite/electrode contacts are also discussed. The insights on electrode engineering pave the way to advancing stable and reliable perovskite devices in erse electronic applications.
Publisher: American Chemical Society (ACS)
Date: 23-06-2014
DOI: 10.1021/PH5000067
Publisher: AIP Publishing
Date: 15-07-2020
DOI: 10.1063/5.0009713
Abstract: Artificial iconic memories, also called photomemories, are new types of nonvolatile memory that can simultaneously detect and store light information in a monolithic device. Several approaches have been proposed to construct artificial iconic memories, such as three-terminal field effect transistors, which can achieve an effective control of the gate voltage and external light terminals. The drawbacks in constructing these memories involve complicated fabrication processes, and the resulting performance of, for ex le, perovskite transistor-type photomemories is limited by the low carrier mobilities and poor ambient stabilities, whereas architectures based on floating gate modulations entail strict interface engineering and poor device reliability. In this paper, we propose a novel monolithic artificial iconic memory with a multilayer architecture of indium tin oxide erovskite/gold erovskite/silver, which combines the memory and photodetector functionalities of perovskites in an integrated device. The bottom perovskite layer plays the role of a photodetector, modulating the voltage bias on the top perovskite layer that serves as a resistive switching memory. This multilayer perovskite device can store photo-sensing data in its resistive states, with a memory retention of 5 × 103 s and ambient stability longer than sixty days. As a prototype demonstration, a 7 × 7 artificial iconic memory array is constructed to detect and store data on light intensity distribution, enabling a nonvolatile imaging functionality. Our work provides a new platform for designing perovskite-based architectures with simultaneous light detection and data storage capabilities.
Publisher: Elsevier BV
Date: 05-2014
Publisher: Wiley
Date: 18-09-0044
Abstract: Colloidal quantum dots (QDs) are promising candidate materials for photovoltaics (PV) owing to the tunable bandgap and low-cost solution processability. Lead selenide (PbSe) QDs are particularly attractive to PV applications due to the efficient multiple-exciton generation and carrier transportation. However, surface defects arising from the oxidation of the PbSe QDs have been the major limitation for their development in PV. Here, a new passivation method for chlorinated PbSe QDs via ion exchange with cesium lead halide (Br, I) perovskite nanocrystals is reported. The surface chloride ions on the as-synthesized QDs can be partially exchanged with bromide or iodide ions from the perovskite nanocrystals, hence forming a hybrid halide passivation. Consistent with the improved photoluminescence quantum yield, the ch ion PV device fabricated with these PbSe QDs achieves a PCE of 8.2%, compared to 7.3% of that fabricated with the untreated QDs. This new method also leads to devices with excellent air-stability, retaining at least 93% of their initial PCEs after being stored in ambient conditions for 57 d. This is considered as the first reported PbSe QD solar cell with a PCE of over 8% to date.
Publisher: Royal Society of Chemistry (RSC)
Date: 2021
DOI: 10.1039/D1NJ03777C
Abstract: A novel cobalt sulfide/vertical graphene (CoS/VG) composite electrode was fabricated via a facile electrodeposition method for high-performance supercapacitor application.
Publisher: American Chemical Society (ACS)
Date: 16-12-2019
Abstract: Tandem cells are one of the most effective ways of breaking the single junction Shockley-Queisser limit. Solution-processable phosphate-buffered saline (PbS) quantum dots are good candidates for producing multiple junction solar cells because of their size-tunable band gap. The intermediate recombination layer (RL) connecting the subcells in a tandem solar cell is crucial for device performance because it determines the charge recombination efficiency and electrical resistance. In this work, a solution-processed ultrathin NiO and Ag nanoparticle film serves as an intermediate layer to enhance the charge recombination efficiency in PbS QD dual-junction tandem solar cells. The ch ion devices with device architecture of indium tin oxide/S-ZnO/1.45 eV PbS-PbI
Publisher: American Chemical Society (ACS)
Date: 11-09-2017
Publisher: Wiley
Date: 29-11-2022
Abstract: Structural defects are ubiquitous for polycrystalline perovskite films, compromising device performance and stability. Herein, a universal method is developed to overcome this issue by incorporating halide perovskite quantum dots (QDs) into perovskite polycrystalline films. CsPbBr 3 QDs are deposited on four types of halide perovskite films (CsPbBr 3 , CsPbIBr 2 , CsPbBrI 2 , and MAPbI 3 ) and the interactions are triggered by annealing. The ions in the CsPbBr 3 QDs are released into the thin films to passivate defects, and concurrently the hydrophobic ligands of QDs self‐assemble on the film surfaces and grain boundaries to reduce the defect density and enhance the film stability. For all QD‐treated films, PL emission intensity and carrier lifetime are significantly improved, and surface morphology and composition uniformity are also optimized. Furthermore, after the QD treatment, light‐induced phase segregation and degradation in mixed‐halide perovskite films are suppressed, and the efficiency of mixed‐halide CsPbIBr 2 solar cells is remarkably improved to over 11% from 8.7%. Overall, this work provides a general approach to achieving high‐quality halide perovskite films with suppressed phase segregation, reduced defects, and enhanced stability for optoelectronic applications.
Publisher: Elsevier BV
Date: 07-2021
Publisher: Royal Society of Chemistry (RSC)
Date: 2023
DOI: 10.1039/D3EE00770G
Abstract: Illustration of protein-based MEG generating electricity by absorbing water from moisture.
Location: No location found
No related grants have been discovered for Long Hu.