ORCID Profile
0000-0002-8478-4687
Current Organisations
Queensland University of Technology
,
Geothermal Energy Journal
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Springer Science and Business Media LLC
Date: 25-01-2015
Publisher: Springer Science and Business Media LLC
Date: 07-11-2019
DOI: 10.1186/S40517-019-0149-0
Abstract: Temperature logs have important applications in the geothermal industry such as the estimation of the static formation temperature (SFT) and the characterization of fluid loss from a borehole. However, the temperature distribution of the wellbore relies on various factors such as wellbore flow conditions, fluid losses, well layout, heat transfer mechanics within the fluid as well as between the wellbore and the surrounding rock formation, etc. In this context, the numerical approach presented in this paper is applied to investigate the influencing parameters/uncertainties in the interpretation of borehole logging data. To this end, synthetic temperature logs representing different well operation conditions were numerically generated using our newly developed wellbore simulator. Our models account for several complex operation scenarios resulting from the requirements of high-enthalpy wells where different flow conditions, such as mud injection with- and without fluid loss and shut-in, occur in the drill string and the annulus. The simulation results reveal that free convective heat transfer plays an important role in the earlier evolution of the shut-in-time temperature high accuracy SFT estimation is only possible when long-term shut-in measurements are used. Two other simulation scenarios for a well under injection conditions show that applying simple temperature correction methods on the non-shut-in temperature data could lead to large errors for SFT estimation even at very low injection flow rates. Furthermore, the magnitude of the temperature gradient increase depends on the flow rate, the percentage of fluid loss and the lateral heat transfer between the fluid and the rock formation. As indicated by this study, under low fluid losses ( 30%) or relatively higher flow rates ( 20 L/s), the impact of flow rate and the lateral heat transfer on the temperature gradient increase can be ignored. These results provide insights on the key factors influencing the well temperature distribution, which are important for the choice of the drilling data to estimate SFT and the design of the inverse modeling scheme in future studies to determine an accurate SFT profile for the high-enthalpy geothermal environment.
Publisher: Springer Science and Business Media LLC
Date: 09-06-2021
DOI: 10.1038/S41598-021-90866-4
Abstract: Mahallat Geothermal Region, located in the central part of Iran, is known as one of the largest low-temperature geothermal fields. In this study, Mahallat geothermal resource has been evaluated based on integrated geological, geochemical and geophysical analyses. Gravity data revealed three major negative anomaly zones. Based on the geochemical analyses, quartz geothermometers are more reliable than others and confirmed that the reservoir is about 90 °C. Lithological properties of Jurassic layers and high sulphate content observed in geochemical data showed traces of the coal-rich layers on the hot fluids. Measured temperatures in 7 boreholes with the depths ranging from 50 to 100 m, have proposed that expected geothermal gradient will be about 81.5 °C/km. Among all drilled boreholes, the data coming from only one resulted in this almost reliable gradient. Other boreholes are clearly too shallow or affected by upflow or downflow of water along existing faults. Geological, geochemical, gravity and measurements of drilled boreholes suggested the existence of a shallow reservoir with an approximate temperature of 90 °C. Regarding gravity and observed faults, geothermal reservoir is elongated parallel to one of the main faults of the region with NE-SW strike.
Publisher: Elsevier BV
Date: 07-2020
Publisher: Elsevier BV
Date: 2021
Publisher: MDPI AG
Date: 09-12-2020
DOI: 10.3390/EN13246510
Abstract: HT-ATES (high-temperature aquifer thermal energy storage) systems are a future option to shift large amounts of high-temperature excess heat from summer to winter using the deep underground. Among others, water-bearing reservoirs in former hydrocarbon formations show favorable storage conditions for HT-ATES locations. This study characterizes these reservoirs in the Upper Rhine Graben (URG) and quantifies their heat storage potential numerically. Assuming a doublet system with seasonal injection and production cycles, injection at 140 °C in a typical 70 °C reservoir leads to an annual storage capacity of up to 12 GWh and significant recovery efficiencies increasing up to 82% after ten years of operation. Our numerical modeling-based sensitivity analysis of operational conditions identifies the specific underground conditions as well as drilling configuration (horizontal/vertical) as the most influencing parameters. With about 90% of the investigated reservoirs in the URG transferable into HT-ATES, our analyses reveal a large storage potential of these well-explored oil fields. In summary, it points to a total storage capacity in depleted oil reservoirs of approximately 10 TWh a−1, which is a considerable portion of the thermal energy needs in this area.
Publisher: Trans Tech Publications, Ltd.
Date: 05-2014
DOI: 10.4028/WWW.SCIENTIFIC.NET/AMM.553.168
Abstract: The study concerns the application of the smoothed particle hydrodynamics (SPH) method within computational fluid dynamics. In the present study, a tank discharge with a falling head is investigated. Water is modelled as a viscous fluid with weak compressibility. An enhanced treatment of the solid boundaries is used within the two-dimensional SPH scheme. The boundaries are represented by a special set of SPH particles that differ from the ones representing the fluid by being immovable, preventing the fluid from leaving the container. Particles with different colors are used to illustrate the sequence of the empting the tank as well as the velocity vectors to show stream lines. A code is developed using C++ to solve all equations explicitly by use of a Verlet algorithm. Results are compared to an analytical solution, and a good agreement is achieved.
Publisher: Springer Science and Business Media LLC
Date: 29-11-2018
Publisher: Elsevier BV
Date: 07-2022
Publisher: Elsevier BV
Date: 11-2018
Publisher: University of Queensland Library
Date: 2017
DOI: 10.14264/UQL.2018.71
Publisher: European Association of Geoscientists & Engineers
Date: 2020
Publisher: Elsevier BV
Date: 2023
Publisher: Springer International Publishing
Date: 2017
Publisher: American Geophysical Union (AGU)
Date: 08-05-2021
DOI: 10.1029/2020GL092138
Abstract: This study presents a probabilistic analysis of 3D Navier‐Stokes (NS) fluid flow through 30 randomly generated sheared fractures with equal roughness properties (Hurst exponent = 0.8). The results of numerous 3D NS realizations are compared with the highly simplified local cubic law (LCL) solutions regarding flow orientations and regimes. The transition between linear and nonlinear flow conditions cannot be described with a generally valid critical Reynolds number , but rather depends on the in idual fracture's void geometry. Over 10% reduction in flow is observed for increased global Re ( ) due to the increasing impact of nonlinear conditions. Furthermore, the fracture geometry promotes flow anisotropy and the formation of channels. Flow perpendicular to the shearing leads to increased channeling and fluid flow (∼40% higher) compared to flow parallel to the shearing. In the latter case, dispersed flow and irregular flow paths cause a reduction of LCL validity.
Publisher: ASMEDC
Date: 2009
Abstract: A nonlinear seismic soil-pile-structure interaction (SSPSI) analysis of fixed offshore platforms constructed on pile foundations including both vertical and battered piles is presented. The analysis is carried out in time domain and the effects of soil nonlinearity, discontinuity at pile soil interfaces, energy dissipation through soil radiation d ing, formation of soil layers on bed rock, structural material nonlinearity and geometrical nonlinearity are considered. A combination of FEM approach and BNWF approach is used in modeling pile (substructure), platform structure (superstructure) and soil media. Gapping in clay is modeled by a special connector configuration. To find out the ground motion of soil layers caused by earthquake excitations at bed rock, a nonlinear site response analysis is performed. The effects of soil-pile-structure interaction on nonlinear seismic analysis of offshore platforms are discussed. A comparison of SSPSI model and pile stub modeling is investigated and it is generally concluded that considering soil-pile-structure interaction causes higher deflections and lower stresses in the platform elements due to soil flexibility, nonlinearity and radiation d ing and leads to a more feasible and realistic platform design. The sequence of generation of plastic zones in the structure and their distribution are also investigated. Results show that this nonlinear behavior is started at brace elements and then propagated to leg elements as earthquake last.
Publisher: Trans Tech Publications, Ltd.
Date: 07-2016
DOI: 10.4028/WWW.SCIENTIFIC.NET/AMM.846.73
Abstract: The study concerns the application of the Smoothed Particle Hydrodynamics (SPH) method within the computational fluid dynamics (CFD). In the present study, some classical problems – the Poiseuille flow, the Hagen-Poiseuille flow, and the Couette flow – with the analytical solutions were investigated to verify a newly developed code of SPH. The code used for solving these problems, is an entirely parallel SPH solver in 3D and has been developed by the authors. Fluid was modelled as a viscous liquid with weak compressibility. The boundary walls were simulated with a special set of fixed boundary particles, and no-slip boundary condition was considered. Computational results were compared to available analytical solutions for transient hydraulic processes. Good agreement is achieved for the whole transient stage of the considered problems until steady state is reached. The results of this study highlight the potential of SPH to tackle a broad range of problems in fluid mechanics.
Publisher: MDPI AG
Date: 22-04-2021
DOI: 10.3390/PR9050742
Abstract: Injection of Newtonian fluids to displace pseudoplastic and dilatant fluids, governed by the power-law viscosity relationship, is common in many industrial processes. In these applications, changing the viscosity of the displaced fluid through velocity alteration can regulate interfacial instabilities, displacement efficiency, the thickness of the static wall layer, and the injected fluid’s tendency to move toward particular parts of the channel. The dynamic behavior of the fluid–fluid interface in the case of immiscibility is highly complicated and complex. In this study, a code was developed that utilizes a multi-component model of the lattice Boltzmann method to decrease the computational cost and accurately model these problems. Accordingly, a 2D inclined channel, filled with a stagnant incompressible Newtonian fluid in the initial section followed by a power-law material, was modeled for numerous scenarios. In conclusion, the results indicate that reducing the power-law index can regulate interfacial instabilities leading to dynamic deformation of static wall layers at the top and the bottom of the channel. However, it does not guarantee a reduction in the thickness of these layers, which is crucial to improve displacement efficiency. The impacts of the compatibility factor and power-law index variations on the filling pattern and finger structure were intensively evaluated.
Publisher: American Geophysical Union (AGU)
Date: 10-2023
DOI: 10.1029/2022WR034362
Publisher: Elsevier BV
Date: 03-2020
Publisher: Elsevier BV
Date: 02-2018
Publisher: Springer Science and Business Media LLC
Date: 12-2021
DOI: 10.1186/S40517-021-00210-2
Abstract: Regarding disadvantages of fossil fuels, renewables like geothermals can be an eco-friendly source of energy. In Iran, the availability of fossil fuels and poor policies surrounding subsidies (ranked as the first in giving subsidies) caused high energy consumption (1.75 times higher than the global average). Energy is mainly provided by fossil fuels that leads to high CO 2 emission. This study evaluates the energy consumption trend and potentials of more sustainable resources like geothermals in Iran. The formation of geothermals is tightly linked with geological prerequisites that are partly present within Iran. Adjacency of the metamorphic with volcanic zones, existence of numerous faults and seismic activity of Iran are notable geological characteristics confirming the geothermal potential. In Iran, 18 regions are being explored as the most promising geothermal prospects. To test the potentials of one of these regions, a geothermal power plant with a capacity of 5 MWe is installed in the Sabalan Field. Northwest (where Sabalan Field is located), central (like Mahalat Region) and southeast of Iran (Makran Zone) can be regarded as promising zones for hosting geothermal prospects.
Publisher: Elsevier BV
Date: 04-2017
Publisher: Elsevier BV
Date: 05-2023
Location: Iran (Islamic Republic of)
Location: Iran (Islamic Republic of)
Location: Iran (Islamic Republic of)
No related grants have been discovered for Maziar Gholami Korzani.