ORCID Profile
0000-0001-9504-680X
Current Organisations
University of South Australia
,
Universiti Teknologi MARA
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Elsevier BV
Date: 10-2015
Publisher: Elsevier BV
Date: 12-2016
Publisher: Elsevier BV
Date: 02-2019
Publisher: Elsevier BV
Date: 04-2017
DOI: 10.1016/J.ENVPOL.2017.01.022
Abstract: Bioremediation of polycyclic aromatic hydrocarbon (PAH)-contaminated soils requires a higher microbial viability and an increased PAH bioavailability. The clay/modified clay-modulated bacterial degradation could deliver a more efficient removal of PAHs in soils depending on the bioavailability of the compounds. In this study, we modified clay minerals (smectite and palygorskite) with mild acid (HCl) and alkali (NaOH) treatments (0.5-3 M), which increased the surface area and pore volume of the products, and removed the impurities without collapsing the crystalline structure of clay minerals. In soil incubation studies, supplements with the clay products increased bacterial growth in the order: 0.5 M HCl ≥ unmodified ≥ 0.5 M NaOH ≥ 3 M NaOH ≥ 3 M HCl for smectite, and 0.5 M HCl ≥ 3 M NaOH ≥ 0.5 M NaOH ≥ 3 M HCl ≥ unmodified for palygorskite. A
Publisher: Elsevier BV
Date: 12-2015
DOI: 10.1016/J.ENVINT.2015.09.017
Abstract: Bioremediation is an effective strategy for cleaning up organic contaminants, such as polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs). Advanced bioremediation implies that biotic agents are more efficient in degrading the contaminants completely. Bioremediation by microbial degradation is often employed and to make this process efficient, natural and cost-effective materials can serve as supportive matrices. Clay/modified clay minerals are effective adsorbents of PAHs/VOCs, and readily available substrate and habitat for microorganisms in the natural soil and sediment. However, the mechanism underpinning clay-mediated biodegradation of organic compounds is often unclear, and this requires critical investigation. This review describes the role of clay/modified clay minerals in hydrocarbon bioremediation through interaction with microbial agents in specific scenarios. The vision is on a faster, more efficient and cost-effective bioremediation technique using clay-based products. This review also proposes future research directions in the field of clay modulated microbial degradation of hydrocarbons.
Publisher: Universitas Gadjah Mada
Date: 10-06-2020
DOI: 10.22146/IJC.43552
Abstract: The efficiencies of raw (RK) and acid activated (0.5 M AAK) kaolinite clay minerals to remove methylene blue (MB) dyes in aqueous solution were investigated and compared. The 0.5 M AAK was prepared by treatment of RK in dilute 0.5 M HCl aqueous solution under reflux. Kaolinite adsorbents were characterized and their MB removal performances were evaluated via the batch method. MB desorption from spent kaolinites was investigated at pH 4 to 8. The MB removal was increased with increasing initial dye concentration, agitation speed and adsorbent dosage in 60 min reaction time at pH 6. Both kaolinites showed high MB removal (up to 97%). The Freundlich model has the best-fit equilibrium adsorption isotherm model for RK and 0.5 M AAK. The kinetic data for both adsorbents showed strong agreement with the pseudo second order kinetic model (r2 0.98). Nevertheless, the spent RK adsorbent demonstrated a significant higher MB retention than 0.5 M AAK in desorption experiments. Kaolinite clays have great potential as cost-effective materials for dyes removal in wastewater treatment.
Publisher: Bulletin of Chemical Reaction Engineering and Catalysis
Date: 27-01-2022
DOI: 10.9767/BCREC.17.1.12733.205-215
Abstract: An in-depth understanding on the structural features of engineered magnetic adsorbent is important for forecasting its efficiencies for environmental clean-up studies. A magnetic kaolinite nanocomposite (MKN) was prepared using Malaysia’s natural kaolinite via co-precipitation method with a three different clay: iron oxide mass ratio (MKN 1:1, MKN 2:1 and MKN 5:1). The morphology and structural features of the magnetic composites were systematically investigated using techniques, such as: Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), surface area analysis (BET), Vibrating S le Magnetometer (VSM), and zeta potential measurement. The removal efficiencies of the adsorbent for Methylene Blue (MB) dye were studied in batch method as a function of pH and initial concentration. MKN1:1 demonstrated the highest magnetisation susceptibility (Ms) of 35.9 emu/g with four-fold-increase in specific surface area as compared to the pristine kaolinite. Preliminary experiment reveals that all MKNs showed almost 100% removal of MB at low initial concentration ( ppm). The spent MKN adsorbent demonstrated an easy recovery via external magnetic field separation and recorded maximum adsorption capacity of 18.1 mg/g. This research gives an insight on the surface characteristics of magnetic clay composite for potential application as an effective and low-cost adsorbent in treating dye contaminated water. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (icenses/by-sa/4.0).
Publisher: Elsevier
Date: 2019
Publisher: Elsevier BV
Date: 02-2020
DOI: 10.1016/J.JHAZMAT.2019.121125
Abstract: Contaminant removal from water involves various technologies among which adsorption is considered to be simple, effective, economical, and sustainable. In recent years, nanocomposites prepared by combining clay minerals and polymers have emerged as a novel technology for cleaning contaminated water. Here, we provide an overview of various types of clay-polymer nanocomposites focusing on their synthesis processes, characteristics, and possible applications in water treatment. By evaluating various mechanisms and factors involved in the decontamination processes, we demonstrate that the nanocomposites can overcome the limitations of in idual polymer and clay components such as poor specificity, pH dependence, particle size sensitivity, and low water wettability. We also discuss different regeneration and wastewater treatment options (e.g., membrane, coagulant, and barrier/columns) using clay-polymer nanocomposites. Finally, we provide an economic analysis of the use of these adsorbents and suggest future research directions.
Publisher: Elsevier BV
Date: 11-2017
DOI: 10.1016/J.CHEMOSPHERE.2017.08.036
Abstract: A palygorskite-iron oxide nanocomposite (Pal-IO) was synthesized in situ by embedding magnetite into the palygorskite structure through co-precipitation method. The physico-chemical characteristics of Pal-IO and their pristine components were examined through various spectroscopic and micro-analytical techniques. Batch adsorption experiments were conducted to evaluate the performance of Pal-IO in removing Pb(II) from aqueous solution. The surface morphology, magnetic recyclability and adsorption efficiency of regenerated Pal-IO using desorbing agents HCl (Pal-IO-HCl) and ethylenediaminetetraacetic acid disodium salt (EDTA-Na
No related grants have been discovered for Ruhaida Rusmin.