ORCID Profile
0000-0001-7430-2624
Current Organisation
University of Sydney
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: No publisher found
Date: 2014
Publisher: Public Library of Science (PLoS)
Date: 10-07-2015
Publisher: Japan Prosthodontic Society
Date: 2016
DOI: 10.2186/AJPS.8.74
Publisher: Springer Science and Business Media LLC
Date: 20-09-2023
Publisher: Trans Tech Publications, Ltd.
Date: 05-2014
DOI: 10.4028/WWW.SCIENTIFIC.NET/AMM.553.384
Abstract: Implant-retained overdenture has been widely applied as a solution to edentulous ageing however, a major concern for the denture wearers is bone resorption induced by the prosthetic interaction with soft tissue and bone. Early studies have revealed that the bone resorption is associated with the disturbance to the mucosa blood flow. This study aimed to investigate the contact pressure induced by an implant-retained overdenture, compared to a conventional complete denture without implants, which implies the potential bone resorption for clinical investigation. A three-dimensional finite element model of a full jaw, including mandible bone, mucosa, and denture, was created through a reverse engineering method based on CBCT images, in which the hyperelastic behaviour of mucosa was determined by curve-fitting to the clinical measurement, for a more realistic response. It is found that the location of the bone loss differed between the implant retained and non-implant complete dentures. With the implants, the denture displaced more at posterior ends towards the mucosa bearing area, leading to higher contact pressure accounted for more severe local bone loss.
Publisher: Quintessence Publishing
Date: 09-2014
DOI: 10.11607/IJP.3847
Publisher: Japan Prosthodontic Society
Date: 2011
Publisher: Japan Prosthodontic Society
Date: 2017
DOI: 10.2186/AJPS.9.291
Publisher: Japanese Society for Dental Materials and Devices
Date: 2015
DOI: 10.4012/DMJ.2014-089
Publisher: Japan Prosthodontic Society
Date: 2022
Publisher: Elsevier BV
Date: 09-2005
Publisher: Springer Science and Business Media LLC
Date: 18-08-2012
Publisher: Japan Prosthodontic Society
Date: 10-2018
Publisher: Trans Tech Publications, Ltd.
Date: 05-2014
DOI: 10.4028/WWW.SCIENTIFIC.NET/AMM.553.322
Abstract: This study aims to analyze the functional contact pressure induced by Removable Partial Denture (RPD) by using a 3D finite element (FE) model constructed based on patient specific CT scans. This model was validated against the in vivo test results. The outcomes demonstrate that the finite element simulation has the capability of quantifying localized stress distribution in a complicated denture-mucosa contact problem, with a reasonable matching to clinical measurements of occlusal force and pressure distribution. The methodology is of considerable clinical implication to improve the long term outcomes of the denture treatment.
Publisher: SAGE Publications
Date: 20-02-2015
Abstract: While nuclear medicine has been proven clinically effective for examination of the change in bone turnover as a result of stress injury, quantitative correlation between tracer uptake and mechanical stimulation in the human jawbone remains unclear. This study aimed to investigate the relationship between bone metabolism observed by 18F-fluoride positron emission tomography (PET) images and mechanical stimuli obtained by finite element analysis (FEA) in the residual ridge induced by the insertion of a removable partial denture (RPD). An 18F-fluoride PET/CT (computerized tomography) scan was performed to assess the change of bone metabolism in the residual ridge under the denture before and after RPD treatment. Corresponding patient-specific 3D finite element (FE) models were created from CT images. Boundary conditions were prescribed by the modeling of condylar contacts, and muscular forces were derived from the occlusal forces measured in vivo to generate mechanobiological reactions. Different mechanobiological stimuli, e.g., equivalent von Mises stress (VMS), equivalent strain (EQV), and strain energy density (SED), determined from nonlinear FEA, were quantified and compared with the standardized uptake values (SUVs) of PET. Application of increased occlusal force after RPD insertion induced higher mechanical stimuli in the residual bone. Accordingly, SUV increased in the region of residual ridge with higher mechanical stimuli. Thus, with SUV, a clear correlation was observed with VMS and SED in the cancellous bone, especially after RPD insertion (R 2 0.8, P 0.001). This study revealed a good correlation between bone metabolism and mechanical stimuli induced by RPD insertion. From this patient-specific study, it was shown that metabolic change detected by PET in the loaded bone, in a much shorter duration than conventional x-ray assessment, is associated with mechanical stimuli. The nondestructive nature of PET/CT scans and FEA could potentially provide a new method for clinical examination and monitoring of prosthetically driven bone remodeling.
Publisher: Wiley
Date: 03-10-2016
DOI: 10.1111/JOOR.12356
Abstract: 18F-fluoride positron emission tomography (PET) can identify subtle functional variation prior to the major structural change detectable by X-ray. This study aims to investigate the mechanobiological bone reaction around the abutment tooth and in the residual ridge, induced by insertion of removable partial denture (RPD) within two different groups of patients: patients without denture experience (Group 1) and patients with denture experience before (Group 2), using 18F-fluoride PET imaging technique. 18F-fluoride PET/computerised tomography (CT) scan was performed to examine the bone metabolic change in mandible before and after the RPD treatment. Region of interests (ROIs) were placed in alveolar bone around abutment tooth and in residual bone beneath the RPD. Standardised uptake value (SUV), reflecting the accumulation of 18F-fluoride, was measured for each ROI. In all subjects of Group 1, SUVs after insertion were higher than before in both alveolar bone and residual bone, while there was less significant change in SUV in subjects of Group 2. This study demonstrated using longitudinal 18F-fluoride PET scans to effectively examine the bone metabolic change in mandible induced by occlusal loading after RPD insertion. Using this technique, within the six subjects in this study, it was shown that bone metabolism around abutment tooth and residual ridge increased after RPD insertion in case of first-time denture user, while there was no big change in the patient with experience of denture before. This study revealed the effectiveness of applying PET to evaluate bone metabolic activity as mechanobiological reaction.
Publisher: Informa UK Limited
Date: 29-05-2016
DOI: 10.1080/10255842.2015.1028925
Abstract: Despite their considerable importance to biomechanics, there are no existing methods available to directly measure apparent Poisson's ratio and friction coefficient of oral mucosa. This study aimed to develop an inverse procedure to determine these two biomechanical parameters by utilizing in vivo experiment of contact pressure between partial denture and beneath mucosa through nonlinear finite element (FE) analysis and surrogate response surface (RS) modelling technique. First, the in vivo denture-mucosa contact pressure was measured by a tactile electronic sensing sheet. Second, a 3D FE model was constructed based on the patient CT images. Third, a range of apparent Poisson's ratios and the coefficients of friction from literature was considered as the design variables in a series of FE runs for constructing a RS surrogate model. Finally, the discrepancy between computed in silico and measured in vivo results was minimized to identify the best matching Poisson's ratio and coefficient of friction. The established non-invasive methodology was demonstrated effective to identify such biomechanical parameters of oral mucosa and can be potentially used for determining the biomaterial properties of other soft biological tissues.
Publisher: Japan Prosthodontic Society
Date: 2012
DOI: 10.2186/AJPS.4.183
Publisher: Elsevier BV
Date: 04-2022
Publisher: Elsevier BV
Date: 02-2015
DOI: 10.1016/J.JBIOMECH.2014.11.043
Abstract: Although implant-retained overdenture allows edentulous patients to take higher occlusal forces than the conventional complete dentures, the biomechanical influences have not been explored yet. Clinically, there is limited knowledge and means for predicting localized bone remodelling after denture treatment with and without implant support. By using finite element (FE) analysis, this article provides an in-silico approach to exploring the treatment effects on the oral mucosa and potential resorption of residual ridge under three different denture configurations in a patient-specific manner. Based on cone beam computerized tomography (CBCT) scans, a 3D heterogeneous FE model was created and the supportive tissue, mucosa, was characterized as a hyperelastic material. A measured occlusal load (63N) was applied onto three virtual models, namely complete denture, two and four implant-retained overdentures. Clinically, the bone resorption was measured after one year in the two implant-retained overdenture treatment. Despite the improved stability and enhanced masticatory function, the implant-retained overdentures demonstrated higher hydrostatic stress in mucosa (43.6kPa and 39.9kPa for two and four implants) at the posterior ends of the mandible due to the cantilever effect, than the complete denture (33.4kPa). Hydrostatic pressure in the mucosa signifies a critical indicator and can be correlated with clinically measured bone resorption, pointing to severer mandibular ridge resorption posteriorly with implant-retained overdentures. This study provides a biomechanical basis for denture treatment planning to improve long-term outcomes with minimal residual ridge resorption.
Publisher: Elsevier BV
Date: 03-2013
Publisher: Japan Prosthodontic Society
Date: 2009
No related grants have been discovered for Hanako Suenaga.