ORCID Profile
0000-0003-4985-2506
Current Organisations
University of Queensland
,
University of Manchester
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Elsevier BV
Date: 10-2018
Publisher: Springer Science and Business Media LLC
Date: 10-06-2022
Publisher: Springer Science and Business Media LLC
Date: 11-04-2019
Publisher: Society of Economic Geologists
Date: 03-2020
DOI: 10.5382/ECONGEO.4714
Abstract: Current portable X-ray fluorescence (pXRF) technology can rapidly and inexpensively yield concentrations of geologically significant elements, typically with instrument detection limits below several tens of parts per million. Based on conventional XRF whole-rock geochemical data, both the Ishikawa alteration index and the chlorite-carbonate-pyrite index increase with proximity to sulfide mineralization at Myra Falls. However, available pXRF technology is typically unable to detect all the elements required to calculate these alteration indices. As a result, there is a need to utilize the elements that are readily detectable using pXRF and apply these to hydrothermal alteration assessment. We propose that Rb/Sr ratios provide a robust proxy for the Ishikawa alteration index and demonstrate that conventional whole-rock XRF analytical results for Rb and Sr can be reproduced using pXRF analysis from drill core surfaces. At Myra Falls, the Rb/Sr ratios vary from & .1 for least altered rocks, 0.1 to 0.5 for weakly altered rocks, 0.5 to 1.0 for moderately altered rocks, 1.0 to 2.0 for strongly altered rocks, and & .0 for intensely altered rocks. Downhole profiles of alteration intensity generated from systematic pXRF analysis of drill core surfaces can be used to inform drilling and targeting decisions. The application of the Rb/Sr ratio as a proxy for alteration intensity extends beyond this case study and can be applied to other hydrothermal systems that produce phyllosilicate minerals as alteration products of feldspar.
Publisher: MDPI AG
Date: 05-07-2019
DOI: 10.3390/MIN9070415
Abstract: Pyrometallurgical processing of ore from the Zeehan mineral field was performed intermittently between 1896 and 1948, primarily recovering Pb, Ag and Cu. While Zn recovery was attempted at the time, it was unsuccessful using the available technology. Consequently, Zn reported to the slag during the smelting process. Today, the former smelter site consists of two large slag piles (North and South). Using a range of techniques (including X-ray diffractometry, scanning electron microscopy, laser ablation inductively coupled plasma mass spectrometry, and static testing) the geometallurgical and geo-environmental properties of these slag materials (n = 280) were determined. The South and North piles contain on average 15% and 11% Zn, respectively. A range of complex mineral phases were identified, and are dominated by glass, silicates (i.e., monticellite–kirschsteinite and hardystonite), oxides (gahnite and hercynite) and minor sulfides (sphalerite and wurtzite). Microtextural examinations defined nine mineral phases (Glass A, Silicates A to D, Oxides A and B, Sulfides A and B). Zn was concentrated in Sulfide A (26%), Glass A (24%) and the Silicates (43%), while Pb was concentrated in Oxide B (76%), with Sulfide B host to the highest Ag (45%) and Cu (65%). Considering this, recovery of Zn using conventional hydrometallurgical processes (i.e., sulfuric acid leaching) is suitable, however the application of unconventional biohydrometallurgical techniques could be explored, as well re-smelting. These slag materials are classified geo-environmentally as potentially acid forming, with leachate concentrations of Zn, Pb consistently above ANZECC (2000) aquatic ecosystem 80% protection guideline values, and, for the majority of s les, exceedances of Cu, Ni and Cd were also measured. Considering these findings, reprocessing of these historic slags for Zn extraction may provide an economically feasible management option for rehabilitating this historical site.
Publisher: Springer International Publishing
Date: 19-10-2016
Publisher: Society of Economic Geologists
Date: 12-2021
DOI: 10.5382/ECONGEO.4853
Abstract: Tasmania is the most important tin province in Australia, having been endowed with & .65 Mt Sn. Some granitic intrusions in western Tasmania have distinctive tourmaline- and quartz-rich magmatic-hydrothermal features, whether they are mineralized (e.g., Heemskirk Granite) or barren (Pieman Heads Granite). The Devonian Heemskirk and Pieman Heads plutons crop out on the western coast of Tasmania and are characterized by similar mineralogical and geochemical compositions and ages. The magmatic-hydrothermal textural features include tourmaline patches, tourmaline orbicules, and tourmaline-muscovite veins, as well as miarolitic cavities and quartz-fluorite-sulfide veins in the Heemskirk Granite. Cathodoluminescence (CL) imaging, laser ablation-inductively coupled plasma-mass spectrometry, and microthermometric analyses of quartz have revealed the physicochemical evolution of the magmatic-hydrothermal fluids from which these tourmaline- and quartz-bearing assemblages precipitated. High Ti quartz (20–28 ppm) in tourmaline patches, orbicules, and cavities typically have homogeneous CL-bright intensity, whereas CL-dark fractures have cut and/or offset the CL-bright and -gray domains that characterize low Ti quartz (3.4–8.5 ppm) from the tourmaline veins. The earliest fluid inclusion assemblages in the quartz-tourmaline orbicules and cavities have a salinity range from 3 to 14 wt % NaCl equiv with intermediate density and were probably trapped at lithostatic pressures of 1.57 ± 0.2 kbar and temperatures of 550° to 570°C, suggesting a depth of 5.9 ± 0.8 km. Prolonged depressurization and cooling may have led to the evolution of a brine (~39 wt % NaCl equiv salinity) from the primary magmatic liquid, which formed halite-bearing hypersaline inclusions in the tourmaline orbicules. Continuous pressure decrease explains the intense brittle failure and fluid migration outward from the apical portions of the pluton, where magmatic fluids partially mixed with and were cooled by external meteoric water. These mechanisms triggered the formation of tourmaline-muscovite-quartz veins and local cassiterite-bearing greisens from a moderate-salinity fluid (~12 wt % NaCl equiv) at temperatures of ~300°C and hydrostatic pressures of 120 bars. Retrograde dissolution textures evident from CL-bright quartz cores surrounded by oscillatory growth zones with gray CL response characterize the low Ti (& ppm) and high Al (500–1,000 ppm) quartz from the fluorite-sulfide veins that precipitated from a low-salinity (5.7 wt % NaCl equiv) acidic fluid at temperatures of 200° ± 25°C and hydrostatic pressures of & bars. High Sb concentrations (up to 80 ppm) in quartz may be an indicator of low-temperature base metal mineralization related to granitic intrusions. Abundant fluid percolation, protracted fractional crystallization, and high tin concentrations in exsolved hydrothermal fluids may explain why the Heemskirk Granite is well endowed in Sn and base metal deposits, whereas the Pieman Heads Granite is barren.
Publisher: Springer International Publishing
Date: 19-10-2016
Publisher: Mineralogical Society of America
Date: 04-2017
DOI: 10.2138/AM-2017-5838
Publisher: Society of Economic Geologists
Date: 17-03-2014
Publisher: Springer International Publishing
Date: 19-10-2016
Publisher: Society of Economic Geologists
Date: 06-2019
DOI: 10.5382/ECONGEO.4654
Publisher: Elsevier BV
Date: 06-2017
Publisher: Elsevier BV
Date: 06-2017
Publisher: Elsevier BV
Date: 09-2016
DOI: 10.1016/J.SCITOTENV.2016.01.054
Abstract: Currently, bioaccessibility testing at contaminated sites is dominated by techniques designed to assess oral bioaccessibility to humans. Determining the plant bioaccessibility of toxic trace elements is also important. In mining landscapes, sulphides are an important source of potentially toxic elements. Simple tests to evaluate readily leachable metals and metalloids exist but do not extract elements temporarily constrained within the sulphide fraction. Sequential extractions describe the association of trace elements with different geochemical fractions but are time consuming, costly and provide excessive detail. This paper proposes a new test for plant bioaccessibility in sulphidic mine wastes and soils that uses hydrogen peroxide to simulate environmental oxidation. The bioaccessible fraction determined is operationally defined and does not predict actual plant uptake. The test targets a) the portion of an element that is currently available in the pore water for uptake by plant roots and also b) the fraction that is temporarily constrained in sulphide minerals but may become available upon oxidation of the substrate. A case study was conducted at a historic mine waste repository site in Cornwall, U.K. where near total As concentrations were extremely elevated and Cd, Cu, Pb, Sb and Zn were also high. Our test determined that bioaccessible concentrations of As, Cd, Cu and Zn and to a lesser extent Sb and Pb were highest in s les of pyritic grey tailings. This is attributed to sulphide mineral oxidation and, particularly for Cd and Zn, the dissolution of soluble secondary minerals. High As concentrations in the marbled tailings were not bioaccessible. Results from the case study show that this new test provides useful information on the future bioaccessibility of contaminants, allowing for classification of mineralised sulphidic waste materials which otherwise cannot be obtained using established geochemical and mineralogical techniques. Furthermore, the test is rapid, repeatable and cost effective.
Publisher: Springer International Publishing
Date: 19-10-2016
Publisher: Elsevier BV
Date: 2018
Publisher: MDPI AG
Date: 22-11-2018
DOI: 10.3390/MIN8120541
Abstract: Management of solid mine wastes requires detailed material characterisation at the start of a project to minimize opportunities for the generation of acid and metalliferous drainage (AMD). Mine planning must focus on obtaining a thorough understanding of the environmental properties of the future waste rock materials. Using drill core obtained from a porphyry Cu project in Northern Europe, this study demonstrates the integrated application of mineralogical and geochemical data to enable the construction of enviro-geometallurgical models. Geoenvironmental core logging, static chemical testing, bulk- and hyperspectral mineralogical techniques, and calculated mineralogy from assay techniques were used to critically evaluate the potential for AMD formation. These techniques provide value-adding opportunities to existing datasets and provide robust cross-validation methods for each technique. A new geoenvironmental logging code and a new geoenvironmental index using hyperspectral mineralogical data (Hy-GI) were developed and embedded into the geochemistry-mineralogy-texture-geometallurgy (GMTG) approach for waste characterisation. This approach is recommended for new mining projects (i.e., early life-of-mine stages) to ensure accurate geoenvironmental forecasting, therefore facilitating the development of an effective waste management plan that minimizes geoenvironmental risks posed by the mined materials.
Publisher: Mineralogical Society of America
Date: 2019
DOI: 10.2138/AM-2019-6534
Publisher: Geological Society of America
Date: 28-07-2015
DOI: 10.1130/G36992.1
Publisher: Springer Science and Business Media LLC
Date: 27-04-2019
Publisher: No publisher found
Date: 2020
DOI: 10.14264/UQL.2020.1
Location: United Kingdom of Great Britain and Northern Ireland
Location: United Kingdom of Great Britain and Northern Ireland
No related grants have been discovered for Nathan Fox.