ORCID Profile
0000-0002-2526-3849
Current Organisation
University of Califonia-Irvine
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: American Society of Mechanical Engineers
Date: 04-02-2013
Abstract: Cartilage defects, which are caused by a variety of reasons such as traumatic injuries, osteoarthritis, or osteoporosis, represent common and severe clinical problems. Each year, over 6 million people visit hospitals in the U.S. for various knee, wrist, and ankle problems. As modern medicine advances, new and novel methodologies have been explored and developed in order to solve and improve current medical problems. One of the areas of investigation that has thus far proven to be very promising is tissue engineering [1, 2]. Since cartilage matrix is nanocomposite, the goal of the current work is to use nanomaterials and nanofabrication methods to create novel biologically inspired tissue engineered cartilage scaffolds for facilitating human bone marrow mesenchymal stem cell (MSC) chondrogenesis. For this purpose, through electrospinning techniques, we designed a series of novel 3D biomimetic nanostructured scaffolds based on carbon nanotubes and biocompatible poly(L-lactic acid) (PLLA) polymers. Specifically, a series of electrospun fibrous PLLA scaffolds with controlled fiber dimension were fabricated in this study. In vitro hMSC studies showed that stem cells prefer to attach in the scaffolds with smaller fiber diameter. More importantly, our in vitro differentiation results demonstrated that incorporation of the biomimetic carbon nanotubes and poly L-lysine coating can induce more chondrogenic differentiations of MSCs than controls, which make them promising for cartilage tissue engineering applications.
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C5NR03425F
Abstract: A novel table-top stereolithography 3D printer and nano-ink were used to fabricate a highly interconnected osteochondral scaffold closely mimicking a 3D native extracellular osteochondral environment. The current work illustrates the utility of this approach for efficient fabrication of a novel nanocomposite hydrogel scaffold for osteochondral regeneration.
Publisher: SAGE Publications
Date: 03-2012
Abstract: Albumin is the most abundant protein found in healing wounds. Traditional and chromatographic protein isotherms of albumin binding on modified cotton fibers are useful in understanding albumin binding to cellulose wound dressings. An important consideration in the design of cellulosic wound dressings is adsorption and accumulation of proteins like albumin at the solid–liquid interface of the biological fluid and wound dressing fiber. To better understand the effect of fiber charge and molecular modifications in cellulose-containing fibers on the binding of serum albumin as observed in protease sequestrant dressings, albumin binding to modified cotton fibers was compared with traditional and chromatographic isotherms. Modified cotton including carboxymethylated, citrate-crosslinked, dialdehyde and phosphorylated cotton, which sequester elastase and collagenase, were compared for their albumin binding isotherms. Albumin isotherms on citrate-cellulose, cross-linked cotton demonstrated a two-fold increased binding affinity over untreated cotton. A comparison of albumin binding between traditional, solution isotherms and chromatographic isotherms on modified cellulose yielded similar equilibrium constants. Application of the binding affinity of albumin obtained in the in vitro protein isotherm to the in vivo wound dressing uptake of the protein is discussed. The chromatographic approach to assessment of albumin isotherms on modified cellulose offers a more rapid approach to evaluating protein binding on modified cellulose over traditional solution approaches.
Publisher: Elsevier
Date: 2015
Publisher: MDPI AG
Date: 02-01-2018
Abstract: Three-dimensional printing/additive manufacturing (3DP/AM) for tissue engineering and regenerative medicine (TE/RM) applications is a multifaceted research area encompassing biology, material science, engineering, and the clinical sciences. Although being quite mature as a research area, only a handful of clinical cases have been reported and even fewer commercial products have made it to the market. The regulatory pathway and costs associated with the introduction of bioresorbable materials for TE/RM have proven difficult to overcome, but greater access to 3DP/AM has spurred interest in the processing and availability of existing and new bioresorbable materials. For this purpose, herein, we introduce a series of medical-grade filaments for fused deposition modelling/fused filament fabrication (FDM/FFF) based on established and Federal Drug Administration (FDA)-approved polymers. Manufacturability, mechanical characterization, and accelerated degradation studies have been conducted to evaluate the suitability of each material for TE/RM applications. The comparative data serves to introduce these materials, as well as a benchmark to evaluate their potential in hard and soft tissue engineering from a physicochemical perspective.
Publisher: Springer International Publishing
Date: 2016
Publisher: Public Library of Science (PLoS)
Date: 29-07-2015
Publisher: Springer Science and Business Media LLC
Date: 06-09-2016
DOI: 10.1038/SREP32876
Abstract: 3D printing and ultrasound techniques are showing great promise in the evolution of human musculoskeletal tissue repair and regeneration medicine. The uniqueness of the present study was to combine low intensity pulsed ultrasound (LIPUS) and advanced 3D printing techniques to synergistically improve growth and osteogenic differentiation of human mesenchymal stem cells (MSC). Specifically, polyethylene glycol diacrylate bioinks containing cell adhesive Arginine-Glycine-Aspartic acid-Serene (RGDS) peptide and/or nanocrystalline hydroxyapatite (nHA) were used to fabricate 3D scaffolds with different geometric patterns via novel table-top stereolithography 3D printer. The resultant scaffolds provide a highly porous and interconnected 3D environment to support cell proliferation. Scaffolds with small square pores were determined to be the optimal geometric pattern for MSC attachment and growth. The optimal LIPUS working parameters were determined to be 1.5 MHz, 20% duty cycle with 150 mW/cm 2 intensity. Results demonstrated that RGDS peptide and nHA containing 3D printed scaffolds under LIPUS treatment can greatly promote MSC proliferation, alkaline phosphatase activity, calcium deposition and total protein content. These results illustrate the effectiveness of the combination of LIPUS and biomimetic 3D printing scaffolds as a valuable combinatorial tool for improved MSC function, thus make them promising for future clinical and various regenerative medicine application.
Publisher: Elsevier
Date: 2016
Publisher: IOP Publishing
Date: 20-08-2013
DOI: 10.1088/0957-4484/24/36/365102
Abstract: Cartilage tissue is a nanostructured tissue which is notoriously hard to regenerate due to its extremely poor inherent regenerative capacity and complex stratified architecture. Current treatment methods are highly invasive and may have many complications. Thus, the goal of this work is to use nanomaterials and nano/microfabrication methods to create novel biologically inspired tissue engineered cartilage scaffolds to facilitate human bone marrow mesenchymal stem cell (MSC) chondrogenesis. To this end we utilized electrospinning to design and fabricate a series of novel 3D biomimetic nanostructured scaffolds based on hydrogen (H2) treated multi-walled carbon nanotubes (MWCNTs) and biocompatible poly(L-lactic acid) (PLLA) polymers. Specifically, a series of electrospun fibrous PLLA scaffolds with controlled fiber dimension were fabricated in this study. In vitro MSC studies showed that stem cells prefer to attach in the scaffolds with smaller fiber diameter. More importantly, the MWCNT embedded scaffolds showed a drastic increase in mechanical strength and a compressive Young's modulus matching to natural cartilage. Furthermore, our MSC differentiation results demonstrated that incorporation of the H2 treated carbon nanotubes and poly-L-lysine coating can induce more chondrogenic differentiations of MSCs than controls. After two weeks of culture, PLLA scaffolds with H2 treated MWCNTs and poly-L-lysine can achieve the highest glycosaminoglycan synthesis, making them promising for further exploration for cartilage regeneration.
Publisher: Springer International Publishing
Date: 2016
Publisher: Springer Science and Business Media LLC
Date: 17-04-2015
Publisher: American Society of Mechanical Engineers
Date: 15-11-2013
Abstract: Osteochondral tissue is composed of ordered and random biological nanostructures and can, in principal, be classified as a nanocomposite material. Thus, the objective of this research is to develop a novel biomimetic biphasic nanocomposite scaffold via a series of 3D fabricating techniques for osteochondral tissue regeneration. For this purpose, a highly porous Poly(caprolactone) (PCL) bone layer with bone morphogenetic protein-2 (BMP-2)-encapsulated Poly(dioxanone) (PDO) nanospheres and nanocrystalline hydroxyapatite was photocrosslinked to a Poly(ethylene glycol)-diacrylate (PEG-DA) cartilage layer containing transforming growth factor-β1 (TGF-β1)-encapsulated PLGA nanospheres. Novel tissue-specific growth factor-encapsulated nanospheres were efficiently fabricated via a wet co-axial electrospraying technique. Integration and porosity of the distinct layers was achieved via co-porogen leaching and ultraviolet (UV) photocrosslinking of water soluble poly(ethylene glycol) (PEG) and um sodium chloride salt particles providing greater control over pore size and increased surface area. Our in vitro results showed significantly improved human bone marrow derived mesenchymal stem cells (hMSCs) adhesion and differentiation in bone and cartilage layers, respectively. In addition, we are working on developing a novel table top stereolithography (SL) apparatus for the manufacture of custom designed 3D biomimetic scaffolds with incorporated growth factor encapsulated nanospheres for osteochondral defect repair. Our early-stage SL development has illustrated good corroboration between computer-aided design (CAD) and manufactured constructs with controlled geometry. The ultimate goal of the novel tabletop SL system is the manufacture of patient-specific implantable 3D nanocomposite scaffolds for osteochondral defect repair. The current SL system developed in our lab allows for efficient photocrosslinking of two novel nanocomposite polymeric materials for the manufacture of three-dimensional (3D) osteochondral constructs with good spatiotemporal control of growth factor release in addition to exhibiting similar mechanical properties to that of the native tissues being addressed.
Publisher: Wiley
Date: 23-10-2017
Abstract: Neurotechnology as a research area can be defined as the convergence of neuroscience and tissue engineering/regenerative medicine. Through directed global initiatives concentrated on a better understanding of the human brain, an exponential rise in innovative functional biomaterials for the symbiotic integration of man and machine has risen. Unfortunately, neurotechnology as with other disruptive technologies faces the daunting path of traversing the broad chasm between the bench (development of technology) and the bedside (application of technology). Clinical translation of medical devices intended to assess, monitor, and treat sensorimotor injuries must address a selection of design and functional constraints which are cost limiting from a traditional manufacturing perspective. As a highly versatile technology, 3D printing in combination with advanced functional materials can be used to manufacture scaffolds for tissue engineering the neural‐prosthesis interface as well as devices with predesigned capabilities of integrating spatial and temporal data sets usable in a diagnostic and therapeutic context. Therefore, recent neurotechnological advancements will be discussed in the realm of 3D printed functional materials ( ) with a focus on their potential for clinical translation.
Publisher: Elsevier BV
Date: 12-2017
Publisher: Mary Ann Liebert Inc
Date: 07-2016
Publisher: IOP Publishing
Date: 27-06-2016
Publisher: Bentham Science Publishers Ltd.
Date: 03-2012
Publisher: Springer Science and Business Media LLC
Date: 02-06-2016
DOI: 10.1038/SREP27226
Abstract: Photocurable, biocompatible liquid resins are highly desired for 3D stereolithography based bioprinting. Here we solidified a novel renewable soybean oil epoxidized acrylate, using a 3D laser printing technique, into smart and highly biocompatible scaffolds capable of supporting growth of multipotent human bone marrow mesenchymal stem cells (hMSCs). Porous scaffolds were readily fabricated by simply adjusting the printer infill density superficial structures of the polymerized soybean oil epoxidized acrylate were significantly affected by laser frequency and printing speed. Shape memory tests confirmed that the scaffold fixed a temporary shape at −18 °C and fully recovered its original shape at human body temperature (37 °C), which indicated the great potential for 4D printing applications. Cytotoxicity analysis proved that the printed scaffolds had significant higher hMSC adhesion and proliferation than traditional polyethylene glycol diacrylate (PEGDA) and had no statistical difference from poly lactic acid (PLA) and polycaprolactone (PCL). This research is believed to significantly advance the development of biomedical scaffolds with renewable plant oils and advanced 3D fabrication techniques.
Publisher: Elsevier BV
Date: 02-2022
Publisher: Mary Ann Liebert Inc
Date: 10-2016
Publisher: Wiley
Date: 10-12-2014
DOI: 10.1002/AIC.14296
Abstract: Scaffold‐based interfacial tissue engineering aims to not only provide the structural and mechanical framework for cellular growth and tissue regeneration, but also direct cell behavior. Due to the disparity in composition of the osteochondral (cartilage and bone) interface, this work has developed a novel biomimetic biphasic nanocomposite scaffold integrating two biocompatible polymers containing tissue‐specific growth factor‐encapsulated core–shell nanospheres. Specifically, a poly(caprolactone) (PCL)‐based bone layer was successfully integrated with a poly(ethylene glycol) (PEG) hydrogel cartilage layer. In addition, a novel nanosphere fabrication technique for efficient growth factor encapsulation and sustained delivery via a wet coaxial electrospray technique was developed. Human bone marrow mesenchymal stem cell (hMSC) adhesion, osteogenic, and chondrogenic differentiation were evaluated. Our in vitro results showed significantly improved hMSC adhesion and differentiation in bone and cartilage layers, respectively. Studies have demonstrated promising results with novel biphasic nanocomposite scaffold for osteochondral tissue regeneration, thus, warranting further studies. © 2013 American Institute of Chemical Engineers AIChE J 60: 432–442, 2014
Publisher: American Scientific Publishers
Date: 10-2012
Abstract: With an increasingly active and aging population, a growing number of orthopedic procedures are performed annually. However, traditional orthopedic implants face many complications such as infection, implant loosening, and poor host tissue integration leading to implant failure. Metal implant materials such as titanium and its alloys are widely used in orthopedic applications mainly based on their excellent mechanical properties and biological inertness. Since human bone extracellular matrix is nanometer in dimension comprised of rich nanostructured hydroxyapatite particles and collagen nanofibers, it is highly desirable to design a biologically-inspired nanostructured coating which renders the biocompatible titanium surface into a biomimetic and bioactive interface, thus enhancing osteoblast adhesion and promoting osseointegration. For this purpose, a biomimetic nanostructured coating based on nanocrystalline hydroxyapatite and single wall carbon nanotubes was designed. Specifically, nano hydroxyapatites with good crystallinity and biomimetic dimensions were prepared via a wet chemistry method and hydrothermal treatment. Microcrystalline hydroxyapatite with larger grain sizes can be obtained without hydrothermal treatment. The carbon nanotubes with different diameter and length were synthesized via an arc plasma method in the presence or absence of a magnetic field. Transmission electron microscopy images illustrate the regular, rod-like nanocrystalline and biomimetic nanostructure of hydrothermally treated nano hydroxyapatite. In addition, the length of carbon nanotubes can be significantly increased under external magnetic fields when compared to nanotubes produced without a magnetic field. More importantly, the in vitro study demonstrated for the first time that osteoblast and mesenchymal stem cell adhesion and proliferation were greater on titanium with hydrothermally treated nanocrystalline hydroxyapatites/magnetically treated carbon nanotubes, which suggests the potential of these novel nanostructured materials for orthopedic applications.
Publisher: Mary Ann Liebert Inc
Date: 12-2012
Publisher: IOP Publishing
Date: 08-09-2016
DOI: 10.1088/0957-4484/27/41/414001
Abstract: Osteochondral tissue has a complex graded structure where biological, physiological, and mechanical properties vary significantly over the full thickness spanning from the subchondral bone region beneath the joint surface to the hyaline cartilage region at the joint surface. This presents a significant challenge for tissue-engineered structures addressing osteochondral defects. Fused deposition modeling (FDM) 3D bioprinters present a unique solution to this problem. The objective of this study is to use FDM-based 3D bioprinting and nanocrystalline hydroxyapatite for improved bone marrow human mesenchymal stem cell (hMSC) adhesion, growth, and osteochondral differentiation. FDM printing parameters can be tuned through computer aided design and computer numerical control software to manipulate scaffold geometries in ways that are beneficial to mechanical performance without hindering cellular behavior. Additionally, the ability to fine-tune 3D printed scaffolds increases further through our investment casting procedure which facilitates the inclusion of nanoparticles with biochemical factors to further elicit desired hMSC differentiation. For this study, FDM was used to print investment-casting molds innovatively designed with varied pore distribution over the full thickness of the scaffold. The mechanical and biological impacts of the varied pore distributions were compared and evaluated to determine the benefits of this physical manipulation. The results indicate that both mechanical properties and cell performance improve in the graded pore structures when compared to homogeneously distributed porous and non-porous structures. Differentiation results indicated successful osteogenic and chondrogenic manipulation in engineered scaffolds.
Publisher: Springer Science and Business Media LLC
Date: 08-06-2012
DOI: 10.1007/S10439-012-0605-5
Abstract: This review provides a brief synopsis of the anatomy and physiology of the osteochondral interface, scaffold-based and non-scaffold based approaches for engineering both tissues independently as well as recent developments in the manufacture of gradient constructs. Novel manufacturing techniques and nanotechnology will be discussed with potential application in osteochondral interfacial tissue engineering.
Publisher: Elsevier BV
Date: 05-2018
Publisher: IOP Publishing
Date: 24-08-2017
Publisher: SAGE Publications
Date: 07-07-2016
Abstract: Background: The aim was to test the null hypothesis that splint material, thickness, or longitudinal ridging does not affect the strength of a wrist splint. Methods: Ten splints were made according to each of 7 different splint designs (resulting in 7 groups of 10 splints each). All splints were the same length and were molded to approximate the contour of the volar hand, wrist, and forearm with the wrist in neutral. Three groups consisted of plaster splints of different thicknesses (8, 10, and 12 ply). Three additional groups included splints of the same thicknesses but with a longitudinal ridge. A single group was constructed from prefabricated fiberglass splinting material and did not involve a longitudinal ridge. Five splints in each group were subjected to 3-point bending mimicking flexion of the wrist and 5 were subjected to a 3-point bend mimicking wrist extension. Splints were loaded to failure using a servohydraulic load frame. Analysis of variance was used to compare splints. Results: Among the plaster splints, more layers of material and longitudinal ridging increased splint strength. Ridged 8-ply plaster splints exceeded the strength of nonridged 10-ply plaster splints. Ridged 8-ply plaster splints were similar in strength to fiberglass splints. Conclusions: The 8-ply ridged plaster splints may be a lighter, effective, and cheaper alternative to more common splint designs.
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C6NR09652B
Publisher: American Chemical Society (ACS)
Date: 23-08-2017
Abstract: We present a design rationale for stretchable soft network composites for engineering tissues that predominantly function under high tensile loads. The convergence of 3D-printed fibers selected from a design library and biodegradable interpenetrating polymer networks (IPNs) result in biomimetic tissue engineered constructs (bTECs) with fully tunable properties that can match specific tissue requirements. We present our technology platform using an exemplary soft network composite model that is characterized to be flexible, yet ∼125 times stronger (E = 3.19 MPa) and ∼100 times tougher (W
Publisher: Springer-Verlag
Date: 2006
Publisher: Elsevier BV
Date: 03-2015
DOI: 10.1016/J.ACTBIO.2014.12.008
Abstract: Traditional breast cancer (BrCa) bone metastasis models contain many limitations with regards to controllability, reproducibility and flexibility of design. In this study, a novel biomimetic bone microenvironment was created by integrating hydroxyapatite (HA) and native bioactive factors deposited by osteogenic induction of human bone marrow mesenchymal stem cells (MSCs) within a cytocompatible chitosan hydrogel. It was found that a 10% nanocrystalline HA (nHA) chitosan scaffold exhibited the highest BrCa adhesion and proliferation when compared to chitosan scaffolds with 20% nHA, 10% and 20% microcrystalline HA as well as amorphous HA. This 3-D tunable bone scaffold can provide a biologically relevant environment, increase cell-cell and cell-matrix interactions as found in native bone, and retain the behavior of BrCa cells with different metastasis potential (i.e. highly metastatic MDA-MB-231, less metastatic MCF-7 and transfected MDA-MB-231). The co-culture of MSCs and MDA-MB-231 in this bone model illustrated that MSCs have the capacity to upregulate the expression of the well-known metastasis-associated gene metadherin within BrCa cells. In summary, this study illustrates the ability of our 3-D bone model to create a biomimetic environment conducive to recapitulating the behavior of metastatic BrCa cells, making it a promising tool for in vitro BrCa cell bone metastasis study and for the discovery of potential therapeutics.
Publisher: IOP Publishing
Date: 14-11-2013
DOI: 10.1088/1748-6041/8/6/065003
Abstract: Cartilage defects are a persistent issue in orthopedic tissue engineering where acute and chronic tissue damage stemming from osteoarthritis, trauma, and sport injuries, present a common and serious clinical problem. Unlike bone, cartilage repair continues to be largely intractable due to the tissue's inherently poor regenerative capacity. Thus, the objective of this study is to design a novel tissue engineered nanostructured cartilage scaffold via biologically-inspired self-assembling rosette nanotubes (RNTs) and biocompatible non-woven poly (l-lactic acid) (PLLA) for enhanced human bone marrow mesenchymal stem cell (hMSC) chondrogenic differentiation. Specifically, RNTs are a new class of biomimetic supramolecular nanomaterial obtained through the self-assembly of low-molecular-weight modified guanine/cytosine DNA base hybrids (the G∧C motif) in an aqueous environment. In this study, we synthesized a novel twin G∧C-based RNT (TB-RGDSK) functionalized with cell-favorable arginine-glycine-aspartic acid-serine-lysine (RGDSK) integrin binding peptide and a twin G∧C based RNT with an aminobutane linker molecule (TBL). hMSC adhesion, proliferation and chondrogenic differentiation were evaluated in vitro in scaffold groups consisting of biocompatible PLLA with TBL, 1:9 TB-RGDSK:TBL, and TB-RGDSK, respectively. Our results show that RNTs can remarkably increase total glycosaminoglycan, collagen, and protein production when compared to PLLA controls without nanotubes. Furthermore, the TB-RGDSK with 100% well-organized RGDSK peptides achieved the highest chondrogenic differentiation of hMSCs. The current in vitro study illustrated that RNT nanotopography and surface chemistry played an important role in enhancing hMSC chondrogenic differentiation thus making them promising for cartilage regeneration.
Publisher: Springer Science and Business Media LLC
Date: 26-02-2016
DOI: 10.1038/SREP21974
Abstract: Nano-based drug delivery devices allowing for effective and sustained targeted delivery of therapeutic agents to solid tumors have revolutionized cancer treatment. As an emerging biomedical technique, cold atmospheric plasma (CAP), an ionized non-thermal gas mixture composed of various reactive oxygen species, reactive nitrogen species and UV photons, shows great potential for cancer treatment. Here we seek to develop a new dual cancer therapeutic method by integrating promising CAP and novel drug loaded core-shell nanoparticles and evaluate its underlying mechanism for targeted breast cancer treatment. For this purpose, core-shell nanoparticles were synthesized via co-axial electrospraying. Biocompatible poly (lactic-co-glycolic acid) was selected as the polymer shell to encapsulate anti-cancer therapeutics. Results demonstrated uniform size distribution and high drug encapsulation efficacy of the electrosprayed nanoparticles. Cell studies demonstrated the effectiveness of drug loaded nanoparticles and CAP for synergistic inhibition of breast cancer cell growth when compared to each treatment separately. Importantly, we found CAP induced down-regulation of metastasis related gene expression (VEGF, MTDH, MMP9 and MMP2) as well as facilitated drug loaded nanoparticle uptake which may aid in minimizing drug resistance-a major problem in chemotherapy. Thus, the integration of CAP and drug encapsulated nanoparticles provides a promising tool for the development of a new cancer treatment strategy.
Publisher: Springer Science and Business Media LLC
Date: 2013
DOI: 10.1557/OPL.2013.181
Abstract: Cartilage defects, which are caused by a variety of reasons such as traumatic injuries, osteoarthritis, or osteoporosis, represent common and severe clinical problems. Each year, over 6 million people visit hospitals in the U.S. for various knee, wrist, and ankle problems. As modern medicine advances, new and novel methodologies have been explored and developed in order to solve and improve current medical problems. One of the areas of investigation is tissue engineering [1, 2]. Since cartilage matrix is nanocomposite, the goal of the current work is to use nanomaterials and nanofabrication methods to create novel biologically inspired tissue engineered cartilage scaffolds for facilitating human bone marrow mesenchymal stem cell (MSC) chondrogenesis. For this purpose, through electrospinning techniques, we designed a series of novel 3D biomimetic nanostructured scaffolds based on carbon nanotubes and biocompatible poly(L-lactic acid) (PLLA) polymers. Specifically, a series of electrospun fibrous PLLA scaffolds with controlled fiber dimension and surface nanoporosity were fabricated in this study . In vitro hMSC studies showed that stem cells prefer to attach in the scaffolds with smaller fiber diameter or suitable nanoporous structures. More importantly, our in vitro differentiation results demonstrated that incorporation of the biomimetic carbon nanotubes and poly L-lysine coating can induce GAG and collagen synthesis that is indicative of chondrogenic differentiations of MSCs. Our novel scaffolds also performed better than controls, which make them promising for cartilage tissue engineering applications.
No related grants have been discovered for Nathan Castro.