ORCID Profile
0000-0002-3018-3640
Current Organisations
Agriculture Victoria
,
La Trobe University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: American Dairy Science Association
Date: 10-2012
Abstract: With the aim of increasing the accuracy of genomic estimated breeding values for dry matter intake (DMI) in dairy cattle, data from Australia (AU), the United Kingdom (UK), and the Netherlands (NL) were combined using both single-trait and multi-trait models. In total, DMI records were available on 1,801 animals, including 843 AU growing heifers with records on DMI measured over 60 to 70 d at approximately 200 d of age, and 359 UK and 599 NL lactating heifers with records on DMI during the first 100 d in milk. The genotypes used in this study were obtained from the Illumina Bovine 50K chip (Illumina Inc., San Diego, CA). The AU, UK, and NL genomic data were matched using the single nucleotide polymorphism (SNP) name. Quality controls were applied by carefully comparing the genotypes of 40 bulls that were available in each data set. This resulted in 30,949 SNP being used in the analyses. Genomic predictions were estimated with genomic REML, using ASReml software. The accuracy of genomic prediction was evaluated in 11 validation sets that is, at least 3 validation sets per country were defined. The reference set (in which animals had both DMI phenotypes and genotypes) was either AU or Europe (UK and NL) or a multi-country reference set consisting of all data except the validation set. When DMI for each country was treated as the same trait, use of a multi-country reference set increased the accuracy of genomic prediction for DMI in UK, but not in AU and NL. Extending the model to a bivariate (AU-EU) or trivariate (AU-UK-NL) model increased the accuracy of genomic prediction for DMI in all countries. The highest accuracies were estimated for all countries when data were analyzed with a trivariate model, with increases of up to 5.5% compared with univariate models within countries.
Publisher: Elsevier
Date: 2017
Publisher: Springer Science and Business Media LLC
Date: 12-03-2016
Publisher: Wiley
Date: 2017
Publisher: Wiley
Date: 11-2016
DOI: 10.3835/PLANTGENOME2016.02.0021
Abstract: Potato ( Solanum tuberosum L.) breeders consider a large number of traits during cultivar development and progress in conventional breeding can be slow. There is accumulating evidence that some of these traits, such as yield, are affected by a large number of genes with small in idual effects. Recently, significant efforts have been applied to the development of genomic resources to improve potato breeding, culminating in a draft genome sequence and the identification of a large number of single nucleotide polymorphisms (SNPs). The availability of these genome‐wide SNPs is a prerequisite for implementing genomic selection for improvement of polygenic traits such as yield. In this review, we investigate opportunities for the application of genomic selection to potato, including novel breeding program designs. We have considered a number of factors that will influence this process, including the autotetraploid and heterozygous genetic nature of potato, the rate of decay of linkage disequilibrium, the number of required markers, the design of a reference population, and trait heritability. Based on estimates of the effective population size derived from a potato breeding program, we have calculated the expected accuracy of genomic selection for four key traits of varying heritability and propose that it will be reasonably accurate. We compared the expected genetic gain from genomic selection with the expected gain from phenotypic and pedigree selection, and found that genetic gain can be substantially improved by using genomic selection.
Publisher: Springer Science and Business Media LLC
Date: 12-11-2012
Publisher: Springer Science and Business Media LLC
Date: 04-2022
DOI: 10.1007/S11032-022-01295-8
Abstract: Genome-wide association studies were conducted using a globally erse safflower ( Carthamus tinctorius L . ) Genebank collection for grain yield (YP), days to flowering (DF), plant height (PH), 500 seed weight (SW), seed oil content (OL), and crude protein content (PR) in four environments (sites) that differed in water availability. Phenotypic variation was observed for all traits. YP exhibited low overall genetic correlations ( r Goverall ) across sites, while SW and OL had high r Goverall and high pairwise genetic correlations ( r Gij ) across all pairwise sites. In total, 92 marker-trait associations (MTAs) were identified using three methods, single locus genome-wide association studies (GWAS) using a mixed linear model (MLM), the Bayesian multi-locus method (BayesR), and meta-GWAS. MTAs with large effects across all sites were detected for OL, SW, and PR, and MTAs specific for the different water stress sites were identified for all traits. Five MTAs were associated with multiple traits 4 of 5 MTAs were variously associated with the three traits of SW, OL, and PR. This study provided insights into the phenotypic variability and genetic architecture of important safflower agronomic traits under different environments.
Publisher: MDPI AG
Date: 23-11-2020
Abstract: Genomic selection can increase the rate of genetic gain in crops through accumulation of positive alleles and reduce phenotyping costs by shortening the breeding cycle time. We performed genomic prediction for resistance to wheat rusts in tetraploid wheat accessions using three cross-validation with the objective of predicting: (1) rust resistance when in iduals are not tested in all environments/locations, (2) the performance of lines across years, and (3) adult plant resistance (APR) of lines with bivariate models. The rationale for the latter is that seedling assays are faster and could increase prediction accuracy for APR. Predictions were derived from adult plant and seedling responses for leaf rust (Lr), stem rust (Sr) and stripe rust (Yr) in a panel of 391 accessions grown across multiple years and locations and genotyped using 16,483 single nucleotide polymorphisms. Different Bayesian models and genomic best linear unbiased prediction yielded similar accuracies for all traits. Site and year prediction accuracies for Lr and Yr ranged between 0.56–0.71 for Lr and 0.51–0.56 for Yr. While prediction accuracy for Sr was variable across different sites, accuracies for Yr were similar across different years and sites. The changes in accuracies can reflect higher genotype × environment (G × E) interactions due to climate or pathogenic variation. The use of seedling assays in genomic prediction was underscored by significant positive genetic correlations between all stage resistance (ASR) and APR (Lr: 0.45, Sr: 0.65, Yr: 0.50). Incorporating seedling phenotypes in the bivariate genomic approach increased prediction accuracy for all three rust diseases. Our work suggests that the underlying plant-host response to pathogens in the field and greenhouse screens is genetically correlated, but likely highly polygenic and therefore difficult to detect at the in idual gene level. Overall, genomic prediction accuracies were in the range suitable for selection in early generations of the breeding cycle.
Publisher: Springer Science and Business Media LLC
Date: 25-01-2017
Publisher: Springer Science and Business Media LLC
Date: 02-06-2018
Publisher: Springer Science and Business Media LLC
Date: 12-2014
Publisher: Wiley
Date: 13-10-2017
DOI: 10.1111/PBI.12835
Publisher: Oxford University Press (OUP)
Date: 02-2013
DOI: 10.1534/GENETICS.112.147983
Abstract: The genomic prediction of phenotypes and breeding values in animals and plants has developed rapidly into its own research field. Results of genomic prediction studies are often difficult to compare because data simulation varies, real or simulated data are not fully described, and not all relevant results are reported. In addition, some new methods have been compared only in limited genetic architectures, leading to potentially misleading conclusions. In this article we review simulation procedures, discuss validation and reporting of results, and apply benchmark procedures for a variety of genomic prediction methods in simulated and real ex le data. Plant and animal breeding programs are being transformed by the use of genomic data, which are becoming widely available and cost-effective to predict genetic merit. A large number of genomic prediction studies have been published using both simulated and real data. The relative novelty of this area of research has made the development of scientific conventions difficult with regard to description of the real data, simulation of genomes, validation and reporting of results, and forward in time methods. In this review article we discuss the generation of simulated genotype and phenotype data, using approaches such as the coalescent and forward in time simulation. We outline ways to validate simulated data and genomic prediction results, including cross-validation. The accuracy and bias of genomic prediction are highlighted as performance indicators that should be reported. We suggest that a measure of relatedness between the reference and validation in iduals be reported, as its impact on the accuracy of genomic prediction is substantial. A large number of methods were compared in ex le simulated and real (pine and wheat) data sets, all of which are publicly available. In our limited simulations, most methods performed similarly in traits with a large number of quantitative trait loci (QTL), whereas in traits with fewer QTL variable selection did have some advantages. In the real data sets examined here all methods had very similar accuracies. We conclude that no single method can serve as a benchmark for genomic prediction. We recommend comparing accuracy and bias of new methods to results from genomic best linear prediction and a variable selection approach (e.g., BayesB), because, together, these methods are appropriate for a range of genetic architectures. An accompanying article in this issue provides a comprehensive review of genomic prediction methods and discusses a selection of topics related to application of genomic prediction in plants and animals.
Publisher: Springer Science and Business Media LLC
Date: 08-02-2021
DOI: 10.1038/S41467-021-21001-0
Abstract: The difficulty in finding causative mutations has h ered their use in genomic prediction. Here, we present a methodology to fine-map potentially causal variants genome-wide by integrating the functional, evolutionary and pleiotropic information of variants using GWAS, variant clustering and Bayesian mixture models. Our analysis of 17 million sequence variants in 44,000+ Australian dairy cattle for 34 traits suggests, on average, one pleiotropic QTL existing in each 50 kb chromosome-segment. We selected a set of 80k variants representing potentially causal variants within each chromosome segment to develop a bovine XT-50K genotyping array. The custom array contains many pleiotropic variants with biological functions, including splicing QTLs and variants at conserved sites across 100 vertebrate species. This biology-informed custom array outperformed the standard array in predicting genetic value of multiple traits across populations in independent datasets of 90,000+ dairy cattle from the USA, Australia and New Zealand.
Publisher: Wiley
Date: 27-05-2011
DOI: 10.1111/J.1365-2052.2011.02208.X
Abstract: Although genomic selection offers the prospect of improving the rate of genetic gain in meat, wool and dairy sheep breeding programs, the key constraint is likely to be the cost of genotyping. Potentially, this constraint can be overcome by genotyping selection candidates for a low density (low cost) panel of SNPs with sparse genotype coverage, imputing a much higher density of SNP genotypes using a densely genotyped reference population. These imputed genotypes would then be used with a prediction equation to produce genomic estimated breeding values. In the future, it may also be desirable to impute very dense marker genotypes or even whole genome re-sequence data from moderate density SNP panels. Such a strategy could lead to an accurate prediction of genomic estimated breeding values across breeds, for ex le. We used genotypes from 48 640 (50K) SNPs genotyped in four sheep breeds to investigate both the accuracy of imputation of the 50K SNPs from low density SNP panels, as well as prospects for imputing very dense or whole genome re-sequence data from the 50K SNPs (by leaving out a small number of the 50K SNPs at random). Accuracy of imputation was low if the sparse panel had less than 5000 (5K) markers. Across breeds, it was clear that the accuracy of imputing from sparse marker panels to 50K was higher if the genetic ersity within a breed was lower, such that relationships among animals in that breed were higher. The accuracy of imputation from sparse genotypes to 50K genotypes was higher when the imputation was performed within breed rather than when pooling all the data, despite the fact that the pooled reference set was much larger. For Border Leicesters, Poll Dorsets and White Suffolks, 5K sparse genotypes were sufficient to impute 50K with 80% accuracy. For Merinos, the accuracy of imputing 50K from 5K was lower at 71%, despite a large number of animals with full genotypes (2215) being used as a reference. For all breeds, the relationship of in iduals to the reference explained up to 64% of the variation in accuracy of imputation, demonstrating that accuracy of imputation can be increased if sires and other ancestors of the in iduals to be imputed are included in the reference population. The accuracy of imputation could also be increased if pedigree information was available and was used in tracking inheritance of large chromosome segments within families. In our study, we only considered methods of imputation based on population-wide linkage disequilibrium (largely because the pedigree for some of the populations was incomplete). Finally, in the scenarios designed to mimic imputation of high density or whole genome re-sequence data from the 50K panel, the accuracy of imputation was much higher (86-96%). This is promising, suggesting that in silico genome re-sequencing is possible in sheep if a suitable pool of key ancestors is sequenced for each breed.
Publisher: Springer Science and Business Media LLC
Date: 04-07-2018
Publisher: Springer Science and Business Media LLC
Date: 28-02-2018
DOI: 10.1038/S41467-017-02809-1
Abstract: Domestication fundamentally reshaped animal morphology, physiology and behaviour, offering the opportunity to investigate the molecular processes driving evolutionary change. Here we assess sheep domestication and artificial selection by comparing genome sequence from 43 modern breeds ( Ovis aries ) and their Asian mouflon ancestor ( O. orientalis ) to identify selection sweeps. Next, we provide a comparative functional annotation of the sheep genome, validated using experimental ChIP-Seq of sheep tissue. Using these annotations, we evaluate the impact of selection and domestication on regulatory sequences and find that sweeps are significantly enriched for protein coding genes, proximal regulatory elements of genes and genome features associated with active transcription. Finally, we find in idual sites displaying strong allele frequency ergence are enriched for the same regulatory features. Our data demonstrate that remodelling of gene expression is likely to have been one of the evolutionary forces that drove phenotypic ersification of this common livestock species.
Publisher: Elsevier BV
Date: 02-2014
DOI: 10.1016/J.MEATSCI.2013.07.008
Abstract: Previous association studies revealed several single nucleotide polymorphisms (SNPs) that explained the observed phenotypic variation for meat tenderness and long-chain omega-3 polyunsaturated fatty acid (PUFA) content of Australian lamb. To confirm the validity of these associated SNPs at predicting meat tenderness and omega-3 PUFA content, an independent validation study was designed. The OvineSNP50 genotypes of these animals were used to impute the 192 SNP Meat Quality Research (MQR) panel genotypes on nearly 6200 animals from the Cooperative Research Centre for Sheep Industry Innovation Information Nucleus Flock and Sheep Genomics Falkiner Memorial Field Station flock. Association analysis revealed numerous SNP from the 192 SNP MQR panel that were associated with carcass quality - fat depth at the C-site and eye muscle depth shear force at day 1 and day 5 after slaughter (SF1 and SF5) and omega-3 PUFA content at P<0.01. However, 1 SNP was independently validated for SF5 (i.e. CAST_101781475). The magnitude of the effect of each significant SNP and the relative allele frequencies across Merino-, Maternal- and Terminal-sired progeny was determined. The independently validated SNP for SF5 and the associated SNP with omega-3 PUFA content will accelerate efforts to improve these phenotypic traits in Australian lamb.
Publisher: MDPI AG
Date: 06-10-2020
DOI: 10.20944/PREPRINTS202010.0118.V1
Abstract: Here we review and describe a set of research priorities to meet present and future challenges posed to farmed animal production that build on progress, successes and resources from the Functional Annotation of ANimal Genomes (FAANG) project.
Publisher: Springer Science and Business Media LLC
Date: 04-04-2017
DOI: 10.1007/S00122-017-2895-3
Abstract: Imputing genotypes from the 90K SNP chip to exome sequence in wheat was moderately accurate. We investigated the factors that affect imputation and propose several strategies to improve accuracy. Imputing genetic marker genotypes from low to high density has been proposed as a cost-effective strategy to increase the power of downstream analyses (e.g. genome-wide association studies and genomic prediction) for a given budget. However, imputation is often imperfect and its accuracy depends on several factors. Here, we investigate the effects of reference population selection algorithms, marker density and imputation algorithms (Beagle4 and FImpute) on the accuracy of imputation from low SNP density (9K array) to the Infinium 90K single-nucleotide polymorphism (SNP) array for a collection of 837 hexaploid wheat Watkins landrace accessions. Based on these results, we then used the best performing reference selection and imputation algorithms to investigate imputation from 90K to exome sequence for a collection of 246 globally erse wheat accessions. Accession-to-nearest-entry and genomic relationship-based methods were the best performing selection algorithms, and FImpute resulted in higher accuracy and was more efficient than Beagle4. The accuracy of imputing exome capture SNPs was comparable to imputing from 9 to 90K at approximately 0.71. This relatively low imputation accuracy is in part due to inconsistency between 90K and exome sequence formats. We also found the accuracy of imputation could be substantially improved to 0.82 when choosing an equivalent number of exome SNP, instead of 90K SNPs on the existing array, as the lower density set. We present a number of recommendations to increase the accuracy of exome imputation.
Publisher: Oxford University Press (OUP)
Date: 19-06-2015
DOI: 10.1534/GENETICS.115.178038
Abstract: Doubled haploids are routinely created and phenotypically selected in plant breeding programs to accelerate the breeding cycle. Genomic selection, which makes use of both phenotypes and genotypes, has been shown to further improve genetic gain through prediction of performance before or without phenotypic characterization of novel germplasm. Additional opportunities exist to combine genomic prediction methods with the creation of doubled haploids. Here we propose an extension to genomic selection, optimal haploid value (OHV) selection, which predicts the best doubled haploid that can be produced from a segregating plant. This method focuses selection on the haplotype and optimizes the breeding program toward its end goal of generating an elite fixed line. We rigorously tested OHV selection breeding programs, using computer simulation, and show that it results in up to 0.6 standard deviations more genetic gain than genomic selection. At the same time, OHV selection preserved a substantially greater amount of genetic ersity in the population than genomic selection, which is important to achieve long-term genetic gain in breeding populations.
Publisher: Springer Science and Business Media LLC
Date: 13-09-2017
DOI: 10.1038/S41598-017-11523-3
Abstract: In humans, the clinical and molecular characterization of sporadic syndromes is often hindered by the small number of patients and the difficulty in developing animal models for severe dominant conditions. Here we show that the availability of large data sets of whole-genome sequences, high-density SNP chip genotypes and extensive recording of phenotype offers an unprecedented opportunity to quickly dissect the genetic architecture of severe dominant conditions in livestock. We report on the identification of seven dominant de novo mutations in CHD7 , COL1A1 , COL2A1 , COPA , and MITF and exploit the structure of cattle populations to describe their clinical consequences and map modifier loci. Moreover, we demonstrate that the emergence of recessive genetic defects can be monitored by detecting de novo deleterious mutations in the genome of bulls used for artificial insemination. These results demonstrate the attractiveness of cattle as a model species in the post genomic era, particularly to confirm the genetic aetiology of isolated clinical case reports in humans.
Publisher: Springer Science and Business Media LLC
Date: 24-08-2017
DOI: 10.1007/S00122-017-2972-7
Abstract: Using NIR and NMR predictions of quality traits overcomes a major barrier for the application of genomic selection to accelerate improvement in grain end-use quality traits of wheat. Grain end-use quality traits are among the most important in wheat breeding. These traits are difficult to breed for, as their assays require flour quantities only obtainable late in the breeding cycle, and are expensive. These traits are therefore an ideal target for genomic selection. However, large reference populations are required for accurate genomic predictions, which are challenging to assemble for these traits for the same reasons they are challenging to breed for. Here, we use predictions of end-use quality derived from near infrared (NIR) or nuclear magnetic resonance (NMR), that require very small amounts of flour, as well as end-use quality measured by industry standard assay in a subset of accessions, in a multi-trait approach for genomic prediction. The NIR and NMR predictions were derived for 19 end-use quality traits in 398 accessions, and were then assayed in 2420 erse wheat accessions. The accessions were grown out in multiple locations and multiple years, and were genotyped for 51208 SNP. Incorporating NIR and NMR phenotypes in the multi-trait approach increased the accuracy of genomic prediction for most quality traits. The accuracy ranged from 0 to 0.47 before the addition of the NIR/NMR data, while after these data were added, it ranged from 0 to 0.69. Genomic predictions were reasonably robust across locations and years for most traits. Using NIR and NMR predictions of quality traits overcomes a major barrier for the application of genomic selection for grain end-use quality traits in wheat breeding.
Publisher: CSIRO Publishing
Date: 2012
DOI: 10.1071/AN11098
Abstract: High rates of genetic gain can be achieved through (1) accurate predictions of breeding values (2) high intensities of selection and (3) shorter generation intervals. Reliabilities of ~60% are currently achievable using genomic selection in dairy cattle. This breakthrough means that selection of animals can happen at a very early age (i.e. as soon as a DNA s le is available) and has opened opportunities to radically redesign breeding schemes. Most research over the past decade has focussed on the feasibility of genomic selection, especially how to increase the accuracy of genomic breeding values. More recently, how to apply genomic technology to breeding schemes has generated a lot of interest. Some of this research remains the intellectual property of breeding companies, but there are ex les in the public domain. Here we review published research into breeding scheme design using genomic selection and evaluate which designs appear to be promising (in terms of rates of genetic gain) and those that may have unfavourable side-effects (i.e. increasing the rate of inbreeding). The schemes range from fairly conservative designs where bulls are screened genomically to reduce numbers entering progeny testing, to schemes where very large numbers of bull calves are screened and used as sires as soon as they reach sexual maturity. More radical schemes that incorporate the use of reproductive technologies (in juveniles) and genomic selection in nucleus herds are also described. The models used are either deterministic and more recently tend to be stochastic, simulating populations of cattle. A key driver of the rate of genetic gain is the generation interval, which could range from being similar to that in conventional testing (~5 years), down to as little as 1.5 years. Generally, the rate of genetic gain is between 12% and 100% more than in conventional progeny testing, while the rate of inbreeding tends to be lower per generation than in progeny testing because Mendelian s ling terms can be estimated more accurately. However, short generation intervals can lead to higher rates of inbreeding per year in genomic breeding programs.
Publisher: Wiley
Date: 07-2018
DOI: 10.3835/PLANTGENOME2017.11.0100
Abstract: Genomic prediction is becoming a popular plant breeding method to predict the genetic merit of lines. While some genomic prediction results have been reported in canola, none have been evaluated for blackleg disease. Here, we report genomic prediction for seedling emergence, survival rate, and internal infection), using 532 Spring and Winter canola lines. These lines were phenotyped in two replicated blackleg disease nurseries grown at Wickliffe and Green Lake, Victoria, Australia. A transcriptome genotyping‐by‐sequencing approach revealed 98,054 single nucleotide polymorphisms (SNPs) after quality control. We assessed various genomic prediction scenarios based on Genomic Best Linear Unbiased Prediction (GBLUP), BayesR and BayesRC, which can make use of prior quantitative trait loci information, via cross‐validation. Clustering based on genomic relationships showed that Winter and Spring lines were genetically distinct, indicating limited gene flow between sets. Genetic correlations within traits between Spring and Winter lines ranged from 0.68 and 0.90 (mean = 0.76). Based on GBLUP in the whole population, moderate to high genomic prediction accuracies were achieved within environments (0.35–0.74) and were reduced across environments (0.28–0.58). Prediction accuracy within the Spring set ranged from 0.30–0.69, and from 0.19–0.71 within the Winter set. The BayesR model resulted in slightly lower accuracy to GBLUP. The proportion of genetic variance explained by known blackleg quantitative trait loci (QTL) was 30%, indicating that there is a large reservoir of genetic variation in blackleg traits that remains to be discovered, but can be captured with genomic prediction. However, providing prior information of known QTL in the BayesRC method resulted in an increased prediction accuracy for survival and internal infection, particularly with Spring lines. Overall, these promising results indicate that genomic prediction will be a valuable tool to make use of all genetic variation to improve blackleg resistance in canola.
Publisher: Springer Science and Business Media LLC
Date: 12-2015
Publisher: Frontiers Media SA
Date: 19-04-2018
Publisher: Springer Science and Business Media LLC
Date: 31-03-2017
DOI: 10.1007/S00122-017-2863-Y
Abstract: Heuristic genomic inbreeding controls reduce inbreeding in genomic breeding schemes without reducing genetic gain. Genomic selection is increasingly being implemented in plant breeding programs to accelerate genetic gain of economically important traits. However, it may cause significant loss of genetic ersity when compared with traditional schemes using phenotypic selection. We propose heuristic strategies to control the rate of inbreeding in outbred plants, which can be categorised into three types: controls during mate allocation, during selection, and simultaneous selection and mate allocation. The proposed mate allocation measure GminF allocates two or more parents for mating in mating groups that minimise coancestry using a genomic relationship matrix. Two types of relationship-adjusted genomic breeding values for parent selection candidates ([Formula: see text]) and potential offspring ([Formula: see text]) are devised to control inbreeding during selection and even enabling simultaneous selection and mate allocation. These strategies were tested in a case study using a simulated perennial ryegrass breeding scheme. As compared to the genomic selection scheme without controls, all proposed strategies could significantly decrease inbreeding while achieving comparable genetic gain. In particular, the scenario using [Formula: see text] in simultaneous selection and mate allocation reduced inbreeding to one-third of the original genomic selection scheme. The proposed strategies are readily applicable in any outbred plant breeding program.
Publisher: American Dairy Science Association
Date: 08-2008
Abstract: Genome scans for detection of bovine quantitative trait loci (QTL) were performed via variance component linkage analysis and linkage disequilibrium single-locus regression (LDRM). Four hundred eighty-four Holstein sires, of which 427 were from 10 grandsire families, were genotyped for 9,919 single nucleotide polymorphisms (SNP) using the Affymetrix MegAllele GeneChip Bovine Mapping 10K SNP array. A hybrid of the grand-daughter and selective genotyping designs was applied. Four thousand eight hundred fifty-six of the 9,919 SNP were located to chromosomes in base-pairs and formed the basis for the analyses. The mean polymorphism information content of the SNP was 0.25. The SNP centimorgan position was interpolated from their base-pair position using a microsatellite framework map. Estimated breeding values were used as observations, and the following traits were analyzed: 305-d lactation milk, fat, and protein yield somatic cell score herd life interval of calving to first service and age at first service. The variance component linkage analysis detected 102 potential QTL, whereas LDRM analysis found 144 significant SNP associations after accounting for a 5% false discovery rate. Twenty potential QTL and 49 significant SNP associations were in close proximity to QTL cited in the literature. Both methods found significant regions on Bos taurus autosome (BTA) 3, 5, and 16 for milk yield BTA 14 and 19 for fat yield BTA 1, 3, 16, and 28 for protein yield BTA 2 and 13 for calving to first service and BTA 14 for age at first service. Both approaches were effective in detecting potential QTL with a dense SNP map. The LDRM was well suited for a first genome scan due to its approximately 8 times lower computational demands. Further fine mapping should be applied on the chromosomal regions of interest found in this study.
Publisher: Wiley
Date: 17-02-2017
DOI: 10.1111/AGE.12541
Abstract: Economically important reproduction traits in sheep, such as number of lambs weaned and litter size, are expressed only in females and later in life after most selection decisions are made, which makes them ideal candidates for genomic selection. Accurate genomic predictions would lead to greater genetic gain for these traits by enabling accurate selection of young rams with high genetic merit. The aim of this study was to design and evaluate the accuracy of a genomic prediction method for female reproduction in sheep using daughter trait deviations (DTD) for sires and ewe phenotypes (when in idual ewes were genotyped) for three reproduction traits: number of lambs born (NLB), litter size (LSIZE) and number of lambs weaned. Genomic best linear unbiased prediction (GBLUP), BayesR and pedigree BLUP analyses of the three reproduction traits measured on 5340 sheep (4503 ewes and 837 sires) with real and imputed genotypes for 510 174 SNPs were performed. The prediction of breeding values using both sire and ewe trait records was validated in Merino sheep. Prediction accuracy was evaluated by across sire family and random cross-validations. Accuracies of genomic estimated breeding values (GEBVs) were assessed as the mean Pearson correlation adjusted by the accuracy of the input phenotypes. The addition of sire DTD into the prediction analysis resulted in higher accuracies compared with using only ewe records in genomic predictions or pedigree BLUP. Using GBLUP, the average accuracy based on the combined records (ewes and sire DTD) was 0.43 across traits, but the accuracies varied by trait and type of cross-validations. The accuracies of GEBVs from random cross-validations (range 0.17-0.61) were higher than were those from sire family cross-validations (range 0.00-0.51). The GEBV accuracies of 0.41-0.54 for NLB and LSIZE based on the combined records were amongst the highest in the study. Although BayesR was not significantly different from GBLUP in prediction accuracy, it identified several candidate genes which are known to be associated with NLB and LSIZE. The approach provides a way to make use of all data available in genomic prediction for traits that have limited recording.
Publisher: CSIRO Publishing
Date: 16-07-2021
DOI: 10.1071/AN21123
Abstract: Context Genomic profiles are the only information source that can uniquely identify an in idual but have not yet been strongly considered in the context of paddock to plate traceability due to the lack of value proposition. Aim The aim of this study was to define the minimum number of single nucleotide polymorphisms (SNP) required to distinguish a unique genotype profile for each in idual s le within a large given population. At the same time, ad hoc approaches were explored to reduce SNP density, and therefore, the size of the dataset to improve computing efficiency and storage requirements while maintaining informativeness to distinguish in iduals. Methods Data for this study included two datasets. One included 78 411 high-density SNP genotypes from commercial Angus cattle and the other 2107 from a research data (1000-bull genome data). In a stepwise approach, different-size SNP panels were explored, with the last step being a successive removal resulting in the smallest set of SNPs that still produced the maximum number of unique genotypes. Key results First study that has demonstrated for large datasets, that ultra-small SNP panels with 20–23 SNPs can generate unique genotypes for up to ~80 000 in iduals, allowing for 100% matching accuracy. Conclusions Ultra-small SNP panels could provide an efficient method to approach the large-scale task of the traceability of beef products through the beef supply chain. Implications Genomic tools could enhance supply-chain traceability.
Publisher: Wiley
Date: 11-09-2015
DOI: 10.1111/AGE.12340
Abstract: Genotyping sheep for genome-wide SNPs at lower density and imputing to a higher density would enable cost-effective implementation of genomic selection, provided imputation was accurate enough. Here, we describe the design of a low-density (12k) SNP chip and evaluate the accuracy of imputation from the 12k SNP genotypes to 50k SNP genotypes in the major Australian sheep breeds. In addition, the impact of imperfect imputation on genomic predictions was evaluated by comparing the accuracy of genomic predictions for 15 novel meat traits including carcass and meat quality and omega fatty acid traits in sheep, from 12k SNP genotypes, imputed 50k SNP genotypes and real 50k SNP genotypes. The 12k chip design included 12 223 SNPs with a high minor allele frequency that were selected with intermarker spacing of 50-475 kb. SNPs for parentage and horned or polled tests also were represented. Chromosome ends were enriched with SNPs to reduce edge effects on imputation. The imputation performance of the 12k SNP chip was evaluated using 50k SNP genotypes of 4642 animals from six breeds in three different scenarios: (1) within breed, (2) single breed from multibreed reference and (3) multibreed from a single-breed reference. The highest imputation accuracies were found with scenario 2, whereas scenario 3 was the worst, as expected. Using scenario 2, the average imputation accuracy in Border Leicester, Polled Dorset, Merino, White Suffolk and crosses was 0.95, 0.95, 0.92, 0.91 and 0.93 respectively. Imputation scenario 2 was used to impute 50k genotypes for 10 396 animals with novel meat trait phenotypes to compare genomic prediction accuracy using genomic best linear unbiased prediction (GBLUP) with real and imputed 50k genotypes. The weighted mean imputation accuracy achieved was 0.92. The average accuracy of genomic estimated breeding values (GEBVs) based on only 12k data was 0.08 across traits and breeds, but accuracies varied widely. The mean GBLUP accuracies with imputed 50k data more than doubled to 0.21. Accuracies of genomic prediction were very similar for imputed and real 50k genotypes. There was no apparent impact on accuracy of GEBVs as a result of using imputed rather than real 50k genotypes, provided imputation accuracy was >90%.
Publisher: Oxford University Press (OUP)
Date: 10-2012
Abstract: In genome-wide association studies, failure to remove variation due to population structure results in spurious associations. In contrast, for predictions of future phenotypes or estimated breeding values from dense SNP data, exploiting population structure arising from relatedness can actually increase the accuracy of prediction in some cases, for ex le, when the selection candidates are offspring of the reference population where the prediction equation was derived. In populations with large effective population size or with multiple breeds and strains, it has not been demonstrated whether and when accounting for or removing variation due to population structure will affect the accuracy of genomic prediction. Our aim in this study was to determine whether accounting for population structure would increase the accuracy of genomic predictions, both within and across breeds. First, we have attempted to decompose the accuracy of genomic prediction into contributions from population structure or linkage disequilibrium (LD) between markers and QTL using a erse multi-breed sheep (Ovis aries) data set, genotyped for 48,640 SNP. We demonstrate that SNP from a single chromosome can achieve up to 86% of the accuracy for genomic predictions using all SNP. This result suggests that most of the prediction accuracy is due to population structure, because a single chromosome is expected to capture relationships but is unlikely to contain all QTL. We then explored principal component analysis (PCA) as an approach to disentangle the respective contributions of population structure and LD between SNP and QTL to the accuracy of genomic predictions. Results showed that fitting an increasing number of principle components (PC as covariates) decreased within breed accuracy until a lower plateau was reached. We speculate that this plateau is a measure of the accuracy due to LD. In conclusion, a large proportion of the accuracy for genomic predictions in our data was due to variation associated with population structure. Surprisingly, accounting for this structure generally decreased the accuracy of across breed genomic predictions.
Publisher: Springer Science and Business Media LLC
Date: 09-02-2012
Publisher: Oxford University Press (OUP)
Date: 12-2015
Abstract: The nonadditive genetic effects may have an important contribution to total genetic variation of phenotypes, so estimates of both the additive and nonadditive effects are desirable for breeding and selection purposes. Our main objectives were to: estimate additive, dominance and epistatic variances of apple (Malus × domestica Borkh.) phenotypes using relationship matrices constructed from genome-wide dense single nucleotide polymorphism (SNP) markers and compare the accuracy of genomic predictions using genomic best linear unbiased prediction models with or without including nonadditive genetic effects. A set of 247 clonally replicated in iduals was assessed for six fruit quality traits at two sites, and also genotyped using an Illumina 8K SNP array. Across several fruit quality traits, the additive, dominance, and epistatic effects contributed about 30%, 16%, and 19%, respectively, to the total phenotypic variance. Models ignoring nonadditive components yielded upwardly biased estimates of additive variance (heritability) for all traits in this study. The accuracy of genomic predicted genetic values (GEGV) varied from about 0.15 to 0.35 for various traits, and these were almost identical for models with or without including nonadditive effects. However, models including nonadditive genetic effects further reduced the bias of GEGV. Between-site genotypic correlations were high (& .85) for all traits, and genotype-site interaction accounted for & % of the phenotypic variability. The accuracy of prediction, when the validation set was present only at one site, was generally similar for both sites, and varied from about 0.50 to 0.85. The prediction accuracies were strongly influenced by trait heritability, and genetic relatedness between the training and validation families.
Publisher: Wiley
Date: 30-03-2015
DOI: 10.1111/JBG.12152
Abstract: The mutations that cause genetic variation in quantitative traits could be old and segregate across many breeds or they could be young and segregate only within one breed. This has implications for our understanding of the evolution of quantitative traits and for genomic prediction to improve livestock. We investigated the age of quantitative trait loci (QTL) for milk production traits identified as segregating in Holstein dairy cattle. We use a multitrait method and found that six of 11 QTL also segregate in Jerseys. Variants identified as Holstein-only QTL were fixed or rare [minor allele frequency (MAF) < 0.05] in Jersey. The age of the QTL mutations appears to vary from perhaps 2000 to 50,000 generations old. The older QTL tend to have high derived allele frequencies and often segregate across both breeds. Holstein-only QTL were often embedded within longer haplotypes, supporting the conclusion that they are typically younger mutations that have occurred more recently than QTL that segregate in both breeds. A reference population for genomic prediction using both Holsteins and Jersey cattle incorrectly predicted a QTL in Jersey cattle when the QTL only segregates in Holsteins. Overcoming this error should help to make genomic prediction more accurate in smaller breeds.
Publisher: CSIRO Publishing
Date: 2010
DOI: 10.1071/AN10096
Abstract: Estimated breeding values for the selection of more profitable sheep for the sheep meat and wool industries are currently based on pedigree and phenotypic records. With the advent of a medium-density DNA marker array, which genotypes ~50 000 ovine single nucleotide polymorphisms, a third source of information has become available. The aim of this paper was to determine whether this genomic information can be used to predict estimated breeding values for wool and meat traits. The effects of all single nucleotide polymorphism markers in a multi-breed sheep reference population of 7180 in iduals with phenotypic records were estimated to derive prediction equations for genomic estimated breeding values (GEBV) for greasy fleece weight, fibre diameter, staple strength, breech wrinkle score, weight at ultrasound scanning, scanned eye muscle depth and scanned fat depth. Five hundred and forty industry sires with very accurate Australian sheep breeding values were used as a validation population and the accuracies of GEBV were assessed according to correlations between GEBV and Australian sheep breeding values . The accuracies of GEBV ranged from 0.15 to 0.79 for wool traits in Merino sheep and from –0.07 to 0.57 for meat traits in all breeds studied. Merino industry sires tended to have more accurate GEBV than terminal and maternal breeds because the reference population consisted mainly of Merino haplotypes. The lower accuracy for terminal and maternal breeds suggests that the density of genetic markers used was not high enough for accurate across-breed prediction of marker effects. Our results indicate that an increase in the size of the reference population will increase the accuracy of GEBV.
Publisher: Proceedings of the National Academy of Sciences
Date: 23-04-2012
Abstract: Using a combination of whole-genome resequencing and high-density genotyping arrays, genome-wide haplotypes were reconstructed for two of the most important bulls in the history of the dairy cattle industry, Pawnee Farm Arlinda Chief (“Chief”) and his son Walkway Chief Mark (“Mark”), each accounting for ∼7% of all current genomes. We aligned 20.5 Gbp (∼7.3× coverage) and 37.9 Gbp (∼13.5× coverage) of the Chief and Mark genomic sequences, respectively. More than 1.3 million high-quality SNPs were detected in Chief and Mark sequences. The genome-wide haplotypes inherited by Mark from Chief were reconstructed using ∼1 million informative SNPs. Comparison of a set of 15,826 SNPs that overlapped in the sequence-based and BovineSNP50 SNPs showed the accuracy of the sequence-based haplotype reconstruction to be as high as 97%. By using the BovineSNP50 genotypes, the frequencies of Chief alleles on his two haplotypes then were determined in 1,149 of his descendants, and the distribution was compared with the frequencies that would be expected assuming no selection. We identified 49 chromosomal segments in which Chief alleles showed strong evidence of selection. Candidate polymorphisms for traits that have been under selection in the dairy cattle population then were identified by referencing Chief’s DNA sequence within these selected chromosome blocks. Eleven candidate genes were identified with functions related to milk-production, fertility, and disease-resistance traits. These data demonstrate that haplotype reconstruction of an ancestral proband by whole-genome resequencing in combination with high-density SNP genotyping of descendants can be used for rapid, genome-wide identification of the ancestor’s alleles that have been subjected to artificial selection.
Publisher: Hindawi Limited
Date: 08-2012
DOI: 10.1017/S0016672312000365
Abstract: Genome wide association studies (GWAS) have largely succeeded family-based linkage studies in livestock and human populations as the preferred method to map loci for complex or quantitative traits. However, the type of results produced by the two analyses contrast sharply due to differences in linkage disequilibrium (LD) imposed by the design of studies. In this paper, we demonstrate that association and linkage studies are in agreement provided that (i) the effects from both studies are estimated appropriately as random effects, (ii) all markers are fitted simultaneously and (iii) appropriate adjustments are made for the differences in LD between the study designs. We demonstrate with real data that linkage results can be predicted by the sum of association effects. Our association study captured most of the linkage information because we could predict the linkage results with moderate accuracy. We suggest that the ability of common single nucleotide polymorphism (SNP) to capture the genetic variance in a population will depend on the effective population size of the study organism. The results provide further evidence for many loci of small effect underlying complex traits. The analysis suggests a more informed method for GWAS is to fit statistical models where all SNPs are analysed simultaneously and as random effects.
Publisher: MDPI AG
Date: 23-03-2021
DOI: 10.3390/RS13061212
Abstract: The extraction of automated plant phenomics from digital images has advanced in recent years. However, the accuracy of extracted phenomics, especially for in idual plants in a field environment, requires improvement. In this paper, a new and efficient method of extracting in idual plant areas and their mean normalized difference vegetation index from high-resolution digital images is proposed. The algorithm was applied on perennial ryegrass row field data multispectral images taken from the top view. First, the center points of in idual plants from digital images were located to exclude plant positions without plants. Second, the accurate area of each plant was extracted using its center point and radius. Third, the accurate mean normalized difference vegetation index of each plant was extracted and adjusted for overlapping plants. The correlation between the extracted in idual plant phenomics and fresh weight ranged between 0.63 and 0.75 across four time points. The methods proposed are applicable to other crops where in idual plant phenotypes are of interest.
Publisher: Oxford University Press (OUP)
Date: 07-2010
DOI: 10.1534/GENETICS.110.116855
Abstract: The rapid increase in high-throughput single-nucleotide polymorphism data has led to a great interest in applying genome-wide evaluation methods to identify an in idual's genetic merit. Genome-wide evaluation combines statistical methods with genomic data to predict genetic values for complex traits. Considerable uncertainty currently exists in determining which genome-wide evaluation method is the most appropriate. We hypothesize that genome-wide methods deal differently with the genetic architecture of quantitative traits and genomes. A genomic linear method (GBLUP), and a genomic nonlinear Bayesian variable selection method (BayesB) are compared using stochastic simulation across three effective population sizes and a wide range of numbers of quantitative trait loci (NQTL). GBLUP had a constant accuracy, for a given heritability and s le size, regardless of NQTL. BayesB had a higher accuracy than GBLUP when NQTL was low, but this advantage diminished as NQTL increased and when NQTL became large, GBLUP slightly outperformed BayesB. In addition, deterministic equations are extended to predict the accuracy of both methods and to estimate the number of independent chromosome segments (Me) and NQTL. The predictions of accuracy and estimates of Me and NQTL were generally in good agreement with results from simulated data. We conclude that the relative accuracy of GBLUP and BayesB for a given number of records and heritability are highly dependent on Me, which is a property of the target genome, as well as the architecture of the trait (NQTL).
Publisher: Oxford University Press (OUP)
Date: 09-2011
DOI: 10.1534/GENETICS.111.128082
Abstract: Related in iduals share potentially long chromosome segments that trace to a common ancestor. We describe a phasing algorithm (ChromoPhase) that utilizes this characteristic of finite populations to phase large sections of a chromosome. In addition to phasing, our method imputes missing genotypes in in iduals genotyped at lower marker density when more densely genotyped relatives are available. ChromoPhase uses a pedigree to collect an in idual’s (the proband) surrogate parents and offspring and uses genotypic similarity to identify its genomic surrogates. The algorithm then cycles through the relatives and genomic surrogates one at a time to find shared chromosome segments. Once a segment has been identified, any missing information in the proband is filled in with information from the relative. We tested ChromoPhase in a simulated population consisting of 400 in iduals at a marker density of 1500/M, which is approximately equivalent to a 50K bovine single nucleotide polymorphism chip. In simulated data, 99.9% loci were correctly phased and, when imputing from 100 to 1500 markers, more than 87% of missing genotypes were correctly imputed. Performance increased when the number of generations available in the pedigree increased, but was reduced when the sparse genotype contained fewer loci. However, in simulated data, ChromoPhase correctly imputed at least 12% more genotypes than fastPHASE, depending on sparse marker density. We also tested the algorithm in a real Holstein cattle data set to impute 50K genotypes in animals with a sparse 3K genotype. In these data 92% of genotypes were correctly imputed in animals with a genotyped sire. We evaluated the accuracy of genomic predictions with the dense, sparse, and imputed simulated data sets and show that the reduction in genomic evaluation accuracy is modest even with imperfectly imputed genotype data. Our results demonstrate that imputation of missing genotypes, and potentially full genome sequence, using long-range phasing is feasible.
Publisher: Springer Science and Business Media LLC
Date: 22-05-2018
Publisher: Springer Science and Business Media LLC
Date: 21-02-2017
Publisher: Wiley
Date: 09-2016
Publisher: Springer Science and Business Media LLC
Date: 19-02-2018
DOI: 10.1038/S41588-018-0056-5
Abstract: Stature is affected by many polymorphisms of small effect in humans
Publisher: MDPI AG
Date: 05-06-2020
Abstract: Genomic selection accelerates genetic progress in crop breeding through the prediction of future phenotypes of selection candidates based on only their genomic information. Here we report genetic correlations and genomic prediction accuracies in 22 agronomic, disease, and seed quality traits measured across multiple years (2015–2017) in replicated trials under rain-fed and irrigated conditions in Victoria, Australia. Two hundred and two spring canola lines were genotyped for 62,082 Single Nucleotide Polymorphisms (SNPs) using transcriptomic genotype-by-sequencing (GBSt). Traits were evaluated in single trait and bivariate genomic best linear unbiased prediction (GBLUP) models and cross-validation. GBLUP were also expanded to include genotype-by-environment G × E interactions. Genomic heritability varied from 0.31to 0.66. Genetic correlations were highly positive within traits across locations and years. Oil content was positively correlated with most agronomic traits. Strong, not previously documented, negative correlations were observed between average internal infection (a measure of blackleg disease) and arachidic and stearic acids. The genetic correlations between fatty acid traits followed the expected patterns based on oil biosynthesis pathways. Genomic prediction accuracy ranged from 0.29 for emergence count to 0.69 for seed yield. The incorporation of G × E translates into improved prediction accuracy by up to 6%. The genomic prediction accuracies achieved indicate that genomic selection is ready for application in canola breeding.
Publisher: Frontiers Media SA
Date: 20-11-2018
Publisher: CSIRO Publishing
Date: 2014
DOI: 10.1071/CP13363
Abstract: Genomic selection is now being used at an accelerating pace in many plant species. This review first discusses the factors affecting the accuracy of genomic selection, and then interprets results of existing plant genomic selection studies in light of these factors. Differences between genomic breeding strategies for self-pollinated and open-pollinated species, and between-population level v. within-family design, are highlighted. As expected, more training in iduals, higher trait heritability and higher marker density generally lead to better accuracy of genomic breeding values in both self-pollinated and open-pollinated plants. Most published studies to date have artificially limited effective population size by using designs of bi-parental or within-family structure to increase accuracies. The capacity of genomic selection to reduce generation intervals by accurately evaluating traits at an early age makes it an effective tool to deliver more genetic gain from plant breeding in many cases.
Publisher: MDPI AG
Date: 23-12-2020
DOI: 10.3390/RS13010020
Abstract: Perennial ryegrass biomass yield is an important driver of profitability for Australian dairy farmers, making it a primary goal for plant breeders. However, measuring and selecting cultivars for higher biomass yield is a major bottleneck in breeding, requiring conventional methods that may be imprecise, laborious, and/or destructive. For forage breeding programs to adopt phenomic technologies for biomass estimation, there exists the need to develop, integrate, and validate sensor-based data collection that is aligned with the growth characteristics of plants, plot design and size, and repeated measurements across the growing season to reduce the time and cost associated with the labor involved in data collection. A fully automated phenotyping platform (DairyBioBot) utilizing an unmanned ground vehicle (UGV) equipped with a ground-based Light Detection and Ranging (LiDAR) sensor and Real-Time Kinematic (RTK) positioning system was developed for the accurate and efficient measurement of plant volume as a proxy for biomass in large-scale perennial ryegrass field trials. The field data were collected from a perennial ryegrass row trial of 18 experimental varieties in 160 plots (three rows per plot). DairyBioBot utilized mission planning software to autonomously capture high-resolution LiDAR data and Global Positioning System (GPS) recordings. A custom developed data processing pipeline was used to generate a plant volume estimate from LiDAR data connected to GPS coordinates. A high correlation between LiDAR plant volume and biomass on a Fresh Mass (FM) basis was observed with the coefficient of determination of R2 = 0.71 at the row level and R2 = 0.73 at the plot level. This indicated that LiDAR plant volume is strongly correlated with biomass and therefore the DairyBioBot demonstrates the utility of an autonomous platform to estimate in-field biomass for perennial ryegrass. It is likely that no single platform will be optimal to measure plant biomass from landscape to plant scales the development and application of autonomous ground-based platforms is of greatest benefit to forage breeding programs.
Publisher: Springer Science and Business Media LLC
Date: 13-07-2014
DOI: 10.1038/NG.3034
Abstract: The 1000 bull genomes project supports the goal of accelerating the rates of genetic gain in domestic cattle while at the same time considering animal health and welfare by providing the annotated sequence variants and genotypes of key ancestor bulls. In the first phase of the 1000 bull genomes project, we sequenced the whole genomes of 234 cattle to an average of 8.3-fold coverage. This sequencing includes data for 129 in iduals from the global Holstein-Friesian population, 43 in iduals from the Fleckvieh breed and 15 in iduals from the Jersey breed. We identified a total of 28.3 million variants, with an average of 1.44 heterozygous sites per kilobase for each in idual. We demonstrate the use of this database in identifying a recessive mutation underlying embryonic death and a dominant mutation underlying lethal chrondrodysplasia. We also performed genome-wide association studies for milk production and curly coat, using imputed sequence variants, and identified variants associated with these traits in cattle.
Publisher: American Dairy Science Association
Date: 2021
Publisher: Frontiers Media SA
Date: 07-12-2018
Publisher: MDPI AG
Date: 10-01-2022
DOI: 10.3390/IJMS23020713
Abstract: Bread wheat is the most widely cultivated crop worldwide, used in the production of food products and a feed source for animals. Selection tools that can be applied early in the breeding cycle are needed to accelerate genetic gain for increased wheat production while maintaining or improving grain quality if demand from human population growth is to be fulfilled. Proteomics screening assays of wheat flour can assist breeders to select the best performing breeding lines and discard the worst lines. In this study, we optimised a robust LC–MS shotgun quantitative proteomics method to screen thousands of wheat genotypes. Using 6 cultivars and 4 replicates, we tested 3 resuspension ratios (50, 25, and 17 µL/mg), 2 extraction buffers (with urea or guanidine-hydrochloride), 3 sets of proteases (chymotrypsin, Glu-C, and trypsin/Lys-C), and multiple LC settings. Protein identifications by LC–MS/MS were used to select the best parameters. A total 8738 wheat proteins were identified. The best method was validated on an independent set of 96 cultivars and peptides quantities were normalised using s le weights, an internal standard, and quality controls. Data mining tools found particularly useful to explore the flour proteome are presented (UniProt Retrieve/ID mapping tool, KEGG, AgriGO, REVIGO, and Pathway Tools).
Publisher: Wiley
Date: 03-2016
DOI: 10.3835/PLANTGENOME2015.06.0046
Abstract: Genomic selection (GS) provides an attractive option for accelerating genetic gain in perennial ryegrass ( Lolium perenne L .) improvement given the long cycle times of most current breeding programs. The present study used simulation to investigate the level of genetic gain and inbreeding obtained from GS breeding strategies compared with traditional breeding strategies for key traits (persistency, yield, and flowering time). Base population genomes were simulated through random mating for 60,000 generations at an effective population size of 10,000. The degree of linkage disequilibrium (LD) in the resulting population was compared with that obtained from empirical studies. Initial parental varieties were simulated to match ersity of current commercial cultivars. Genomic selection was designed to fit into a company breeding program at two selection points in the breeding cycle (spaced plants and miniplot). Genomic estimated breeding values (GEBVs) for productivity traits were trained with phenotypes and genotypes from plots. Accuracy of GEBVs was 0.24 for persistency and 0.36 for yield for single plants, while for plots it was lower (0.17 and 0.19, respectively). Higher accuracy of GEBVs was obtained for flowering time (up to 0.7), partially as a result of the larger reference population size that was available from the clonal row stage. The availability of GEBVs permit a 4‐yr reduction in cycle time, which led to at least a doubling and trebling genetic gain for persistency and yield, respectively, than the traditional program. However, a higher rate of inbreeding per cycle among varieties was also observed for the GS strategy.
Publisher: Public Library of Science (PLoS)
Date: 14-10-2008
Publisher: Frontiers Media SA
Date: 12-12-2017
Publisher: Oxford University Press (OUP)
Date: 11-2011
Abstract: Current aquaculture breeding programs aimed at improving resistance to diseases are based on challenge tests, where performance is recorded on sibs of candidates to selection, and on selection between families. Genome-wide evaluation (GWE) of breeding values offers new opportunities for using variation within families when dealing with such traits. However, up-to-date studies on GWE in aquaculture programs have only considered continuous traits. The objectives of this study were to extend GWE methodology, in particular the Bayes B method, to analyze dichotomous traits such as resistance to disease, and to quantify, through computer simulation, the accuracy of GWE for disease resistance in aquaculture sib-based programs, using the methodology developed. Two heritabilities (0.1 and 0.3) and 2 disease prevalences (0.1 and 0.5) were assumed in the simulations. We followed the threshold liability model, which assumes that there is an underlying variable (liability) with a continuous distribution and assumed a BayesB model for the liabilities. It was shown that the threshold liability model used fits very well with the BayesB model of GWE. The advantage of using the threshold model was clear when dealing with disease resistance dichotomous phenotypes, particularly under the conditions where linear models are less appropriate (low heritability and disease prevalence). In the testing set (where in iduals are genotyped but not measured), the increase in accuracy for the simulated schemes when using the threshold model ranged from 4 (for heritability equal to 0.3 and prevalence equal to 0.5) to 16% (for heritability and prevalence equal to 0.1) when compared with the linear model.
Publisher: Springer Science and Business Media LLC
Date: 26-06-2014
DOI: 10.1007/S00122-014-2341-8
Abstract: We have demonstrated that genomic selection in erse wheat landraces for resistance to leaf, stem and strip rust is possible, as genomic breeding values were moderately accurate. Markers with large effects in the Bayesian analysis confirmed many known genes, while also discovering many previously uncharacterised genome regions associated with rust scores. Genomic selection, where selection decisions are based on genomic estimated breeding values (GEBVs) derived from genome-wide DNA markers, could accelerate genetic progress in plant breeding. In this study, we assessed the accuracy of GEBVs for rust resistance in 206 hexaploid wheat (Triticum aestivum) landraces from the Watkins collection of phenotypically erse wheat genotypes from 32 countries. The landraces were genotyped for 5,568 SNPs using an Illumina iSelect 9 K bead chip assay and phenotyped for field-based leaf rust (Lr), stem rust (Sr) and stripe rust (Yr) responses across multiple years. Genomic Best Linear Unbiased Prediction (GBLUP) and a Bayesian Regression method (BayesR) were used to predict GEBVs. Based on fivefold cross-validation, the accuracy of genomic prediction averaged across years was 0.35, 0.27 and 0.44 for Lr, Sr and Yr using GBLUP and 0.33, 0.38 and 0.30 for Lr, Sr and Yr using BayesR, respectively. Inclusion of PCR-predicted genotypes for known rust resistance genes increased accuracy more substantially when the marker was diagnostic (Lr34/Sr57/Yr18) for the presence-absence of the gene rather than just linked (Sr2). Investigation of the impact of genetic relatedness between validation and reference lines on accuracy of genomic prediction showed that accuracy will be higher when each validation line had at least one close relationship to the reference lines. Overall, the prediction accuracies achieved in this study are encouraging, and confirm the feasibility of genomic selection in wheat. In several instances, estimated marker effects were confirmed by published literature and results of mapping experiments using Watkins accessions.
Publisher: Wiley
Date: 14-10-2013
DOI: 10.1111/EVA.12113
Publisher: Public Library of Science (PLoS)
Date: 07-12-2015
Publisher: Cold Spring Harbor Laboratory
Date: 05-08-2021
DOI: 10.1101/2021.08.03.454059
Abstract: Array-based SNP genotyping platforms have low genotype error and missing data rates compared to genotyping-by-sequencing technologies. However, design decisions used to create array-based SNP genotyping assays for both research and breeding applications are critical to their success. We describe a novel approach applicable to any animal or plant species for the design of cost-effective imputation-enabled SNP genotyping arrays with broad utility and demonstrate its application through the development of the Infinium Wheat Barley 40K SNP array. We show the approach delivers high-quality and high-resolution data for wheat and barley, including when s les are jointly hybridised. The new array aims to maximally capture haplotypic ersity in globally erse wheat and barley germplasm while minimising ascertainment bias. Comprising mostly biallelic markers designed to be species-specific and single-copy, it permits highly accurate imputation in erse germplasm to improve statistical power for GWAS and genomic selection. The SNP content captures tetraploid wheat (A- and B-genome) and Ae. tauschii (D-genome) ersity and delineates synthetic and tetraploid wheat from other wheats, as well as tetraploid species and subgroups. The content includes SNP tagging key trait loci in wheat and barley and that directly connect to other genotyping platforms and legacy datasets. The utility of the array is enhanced through the web-based tool Pretzel ( plantinformatics.io/ ) which enables the array’s content to be visualised and interrogated interactively in the context of numerous genetic and genomic resources to more seamlessly connect research and breeding. The array is available for use by the international wheat and barley community. Designing SNP genotyping arrays for closely related species with broad applicability in both research and breeding is challenging. Here we describe a novel generic approach to select SNP content for such arrays and demonstrate its utility in wheat and barley to: capture haplotypic ersity while minimising ascertainment bias accurately impute to high SNP density in erse germplasm generate high-quality high-resolution genotypic data and jointly hybridise s les to the same bead chip array.
Publisher: Springer Science and Business Media LLC
Date: 05-2019
DOI: 10.1038/S41588-019-0382-2
Abstract: Introgression is a potential source of beneficial genetic ersity. The contribution of introgression to adaptive evolution and improvement of wheat as it was disseminated worldwide remains unknown. We used targeted re-sequencing of 890 erse accessions of hexaploid and tetraploid wheat to identify wild-relative introgression. Introgression, and selection for improvement and environmental adaptation, each reduced deleterious allele burden. Introgression increased ersity genome wide and in regions harboring major agronomic genes, and contributed alleles explaining a substantial proportion of phenotypic variation. These results suggest that historic gene flow from wild relatives made a substantial contribution to the adaptive ersity of modern bread wheat.
Publisher: Annual Reviews
Date: 15-02-2019
DOI: 10.1146/ANNUREV-ANIMAL-020518-115024
Abstract: The 1000 Bull Genomes Project is a collection of whole-genome sequences from 2,703 in iduals capturing a significant proportion of the world's cattle ersity. So far, 84 million single-nucleotide polymorphisms (SNPs) and 2.5 million small insertion deletions have been identified in the collection, a very high level of genetic ersity. The project has greatly accelerated the identification of deleterious mutations for a range of genetic diseases, as well as for embryonic lethals. The rate of identification of causal mutations for complex traits has been slower, reflecting the typically small effect size of these mutations and the fact that many are likely in as-yet-unannotated regulatory regions. Both the deleterious mutations that have been identified and the mutations associated with complex trait variation have been included in low-cost SNP array designs, and these arrays are being genotyped in tens of thousands of dairy and beef cattle, enabling management of deleterious mutations in these populations as well as genomic selection.
Publisher: Springer Science and Business Media LLC
Date: 09-11-2017
Publisher: Wiley
Date: 12-2007
DOI: 10.1111/J.1439-0388.2007.00693.X
Abstract: Traditional selection methods, such as sib and best linear unbiased prediction (BLUP) selection, which increased genetic gain by increasing accuracy of evaluation have also led to an increased rate of inbreeding per generation (DeltaFG). This is not necessarily the case with genome-wide selection, which also increases genetic gain by increasing accuracy. This paper explains why genome-wide selection reduces DeltaFG when compared with sib and BLUP selection. Genome-wide selection achieves high accuracies of estimated breeding values through better prediction of the Mendelian s ling term component of breeding values. This increases differentiation between sibs and reduces coselection of sibs and DeltaFG. The high accuracy of genome-wide selection is expected to reduce the between family variance and reweigh the emphasis of estimated breeding values of in iduals towards the Mendelian s ling term. Moreover, estimation induced intraclass correlations of sibs are expected to be lower in genome-wide selection leading to a further decrease of coselection of sibs when compared with BLUP. Genome-wide prediction of breeding values, therefore, enables increased genetic gain while at the same time reducing DeltaFG when compared with sib and BLUP selection.
Publisher: Springer Science and Business Media LLC
Date: 28-08-2018
DOI: 10.1038/S41598-018-31304-W
Abstract: Domestication and selective breeding has resulted in over 1000 extant cattle breeds. Many of these breeds do not excel in important traits but are adapted to local environments. These adaptations are a valuable source of genetic material for efforts to improve commercial breeds. As a step toward this goal we identified candidate regions to be under selection in genomes of nine Russian native cattle breeds adapted to survive in harsh climates. After comparing our data to other breeds of European and Asian origins we found known and novel candidate genes that could potentially be related to domestication, economically important traits and environmental adaptations in cattle. The Russian cattle breed genomes contained regions under putative selection with genes that may be related to adaptations to harsh environments (e.g., AQP5 , RAD50 , and RETREG1 ). We found genomic signatures of selective sweeps near key genes related to economically important traits, such as the milk production (e.g., DGAT1 , ABCG2 ), growth (e.g., XKR4 ), and reproduction (e.g., CSF2 ). Our data point to candidate genes which should be included in future studies attempting to identify genes to improve the extant breeds and facilitate generation of commercial breeds that fit better into the environments of Russia and other countries with similar climates.
Publisher: Wiley
Date: 16-05-2018
Abstract: We have developed the first comprehensive simulator for polyploid genomes (PolySim) and demonstrated its value by performing large-scale simulations to examine the effect of different population parameters on the evolution of polyploids. PolySim is unlimited in terms of ploidy, population size or number of simulated loci. Our process considered the evolution of polyploids from diploid ancestors, polysomic inheritance, inbreeding, recombination rate change in polyploids and gene flow from lower to higher ploidies. We compared the number of segregating single nucleotide polymorphisms, minor allele frequency, heterozygosity, R
Publisher: Springer Science and Business Media LLC
Date: 15-08-2017
Publisher: Springer Science and Business Media LLC
Date: 12-2017
Publisher: Springer Science and Business Media LLC
Date: 02-03-2017
DOI: 10.1007/S00122-016-2851-7
Abstract: BayesR and MLM association mapping approaches in common wheat landraces were used to identify genomic regions conferring resistance to Yr, Lr, and Sr diseases. Deployment of rust resistant cultivars is the most economically effective and environmentally friendly strategy to control rust diseases in wheat. However, the highly evolving nature of wheat rust pathogens demands continued identification, characterization, and transfer of new resistance alleles into new varieties to achieve durable rust control. In this study, we undertook genome-wide association studies (GWAS) using a mixed linear model (MLM) and the Bayesian multilocus method (BayesR) to identify QTL contributing to leaf rust (Lr), stem rust (Sr), and stripe rust (Yr) resistance. Our study included 676 pre-Green Revolution common wheat landrace accessions collected in the 1920-1930s by A.E. Watkins. We show that both methods produce similar results, although BayesR had reduced background signals, enabling clearer definition of QTL positions. For the three rust diseases, we found 5 (Lr), 14 (Yr), and 11 (Sr) SNPs significant in both methods above stringent false-discovery rate thresholds. Validation of marker-trait associations with known rust QTL from the literature and additional genotypic and phenotypic characterisation of biparental populations showed that the landraces harbour both previously mapped and potentially new genes for resistance to rust diseases. Our results demonstrate that pre-Green Revolution landraces provide a rich source of genes to increase genetic ersity for rust resistance to facilitate the development of wheat varieties with more durable rust resistance.
Publisher: CSIRO Publishing
Date: 2012
DOI: 10.1071/AN11229
Abstract: Whole genome association studies in humans have shown a strong relationship between omega-3 levels in plasma and single nucleotide polymorphisms (SNP) located close to genes whose protein products are involved in the biosynthesis of long-chain omega-3 fatty acids. In sheep and other livestock species, the calpain/calpastatin system is the principal influence on natural variation in meat tenderness between animals. Using targeted next generation sequencing, we sequenced the fatty acid desaturase locus (FADS1/2/3), ELOVL2 and SLC26A10 and the calpain/calpastatin (CAPN1/2/3 and CAST) gene loci of 35 industry sires from the Australian flock. A total of 753 SNP were identified and 182 of these SNP were selected for incorporation onto a research SNP panel that represented the genetic variation across the nine genes. A total of 1252 animals were genotyped from the Australian Sheep CRC Information Nucleus Flock for these SNP and the genomic association was calculated for omega-3 fatty acid content and objective meat tenderness in lamb. Six SNP within CAST and CAPN2 showed association with shear force at Day 5 post-mortem at a significance level of P ≤ 0.01. When these were fitted simultaneously in a mixed-model analysis with fixed effects and covariates, three SNP remained significant. These SNP each had an unfavourable effect on shear force of between 1.1 and 1.8 N, with a combined effect of 4.1 N. The frequency of the favourable alleles in the progeny measured indicates that these SNP hold good potential for improving the management of meat tenderness across Merino, Border Leicester and Terminal sire types. No SNP within the FADS1/2/3, ELOVL2 and SLC26A10 gene regions were associated with lamb muscle omega-3 levels. This indicates that genetic variation in the long-chain omega-3 biosynthesis pathway genes analysed here may not be important for omega-3 content in lamb within the Information Nucleus Flock population.
Publisher: Springer Science and Business Media LLC
Date: 17-01-2019
Publisher: Oxford University Press (OUP)
Date: 02-2013
DOI: 10.1534/GENETICS.112.143313
Abstract: Genomic-enabled prediction is becoming increasingly important in animal and plant breeding and is also receiving attention in human genetics. Deriving accurate predictions of complex traits requires implementing whole-genome regression (WGR) models where phenotypes are regressed on thousands of markers concurrently. Methods exist that allow implementing these large-p with small-n regressions, and genome-enabled selection (GS) is being implemented in several plant and animal breeding programs. The list of available methods is long, and the relationships between them have not been fully addressed. In this article we provide an overview of available methods for implementing parametric WGR models, discuss selected topics that emerge in applications, and present a general discussion of lessons learned from simulation and empirical data analysis in the last decade.
Publisher: Springer Science and Business Media LLC
Date: 18-01-2021
DOI: 10.1186/S12711-021-00602-9
Abstract: Variants that regulate transcription, such as expression quantitative trait loci (eQTL), have shown enrichment in genome-wide association studies (GWAS) for mammalian complex traits. However, no study has reported eQTL in sheep, although it is an important agricultural species for which many GWAS of complex meat traits have been conducted. Using RNA sequence data produced from liver and muscle from 149 sheep and imputed whole-genome single nucleotide polymorphisms (SNPs), our aim was to dissect the genetic architecture of the transcriptome by associating sheep genotypes with three major molecular phenotypes including gene expression (geQTL), exon expression (eeQTL) and RNA splicing (sQTL). We also examined these three types of eQTL for their enrichment in GWAS of multi-meat traits and fatty acid profiles. Whereas a relatively small number of molecular phenotypes were significantly heritable (h 2 0, P 0.05), their mean heritability ranged from 0.67 to 0.73 for liver and from 0.71 to 0.77 for muscle. Association analysis between molecular phenotypes and SNPs within ± 1 Mb identified many significant cis-eQTL (false discovery rate, FDR 0.01). The median distance between the eQTL and transcription start sites (TSS) ranged from 68 to 153 kb across the three eQTL types. The number of common variants between geQTL, eeQTL and sQTL within each tissue, and the number of common variants between liver and muscle within each eQTL type were all significantly ( P 0.05) larger than expected by chance. The identified eQTL were significantly ( P 0.05) enriched in GWAS hits associated with 56 carcass traits and fatty acid profiles. For ex le, several geQTL in muscle mapped to the FAM184B gene, hundreds of sQTL in liver and muscle mapped to the CAST gene, and hundreds of sQTL in liver mapped to the C6 gene. These three genes are associated with body composition or fatty acid profiles. We detected a large number of significant eQTL and found that the overlap of variants between eQTL types and tissues was prevalent. Many eQTL were also QTL for meat traits. Our study fills a gap in the knowledge on the regulatory variants and their role in complex traits for the sheep model.
No related grants have been discovered for Hans D Daetwyler.