ORCID Profile
0000-0003-2676-8942
Current Organisations
CSIRO Clayton
,
CSIRO
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Elsevier BV
Date: 09-2022
Publisher: Elsevier BV
Date: 09-2021
Publisher: Informa UK Limited
Date: 31-08-2021
Publisher: MDPI AG
Date: 04-01-2023
DOI: 10.3390/MIN13010079
Abstract: When considering the extraction of metals from lunar regolith for use in space, one reductive method of interest is vacuum thermal dissociation. Given the high vacuum environment on the Moon, the sub-liquidus operation of such a process, i.e., sublimation, warrants investigation. In the current work, the kinetics of the vacuum sublimation of the more volatile major oxides found in the lunar regolith, Na2O, K2O, and FeO, are evaluated. Two distinct factors are accounted for in the current work: the change in the evaporation flux due to temperature and the reduction in available surface area for evaporation due to sintering of the feedstock. Surface area change due to the sintering of compressed LMS-1 regolith simulant pellets was quantified via a Brunauer–Emmett–Teller analysis. The surface area of the s les was measured to vary from 3.29 m2/g in the unsintered s le, to 1.04 m2/g in the s les sintered at 800 °C, and down to 0.09 m2/g in the s le sintered at 1150 °C. Evaporation flux was calculated using the Hertz–Knudsen–Langmuir equation using saturated vapor pressures predicted from the FactSage thermochemical package and verified against Knudsen Effusion Mass Spectroscopy data from tests conducted on lunar regolith s le #12022. The combination of these studies resulted in the conclusion that no local maxima in evaporation rate below the melting point was found for the current system, as such the highest rate of sublimation was determined to be 1200 °C for all species, at temperatures of 1200 °C and above, partial melting of the material occurs. The predicted maximum rate of sublimation for the species Fe, Na, and K at 1200 °C was 0.08, 1.38, and 1.02 g/h/g of regolith, respectively. It is noted that significant variation was seen between FactSage predictions of saturated vapor pressures and the measured values. Future work generating detailed thermochemical databases to predict the behavior of complex systems similar in composition to lunar regolith would benefit the accuracy of similar kinetic studies in the future.
Location: Australia
No related grants have been discovered for Matthew Shaw.