ORCID Profile
0000-0003-0341-3970
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: IEEE
Date: 10-2019
Publisher: MDPI AG
Date: 06-2022
Abstract: Parrot Mambo mini-drone is a readily available commercial quadrotor platform to understand and analyze the behavior of a quadrotor both in indoor and outdoor applications. This study evaluates the performance of three alternative controllers on a Parrot Mambo mini-drone in an interior environment, including Proportional–Integral–Derivative (PID), Linear Quadratic Regulator (LQR), and Model Predictive Control (MPC). To investigate the controllers’ performance, initially, the MATLAB®/Simulink™ environment was considered as the simulation platform. The successful simulation results finally led to the implementation of the controllers in real-time in the Parrot Mambo mini-drone. Here, MPC surpasses PID and LQR in ensuring the system’s stability and robustness in simulation and real-time experiment results. Thus, this work makes a contribution by introducing the impact of MPC on this quadrotor platform, such as system stability and robustness, and showing its efficacy over PID and LQR. All three controllers demonstrate similar tracking performance in simulations and experiments. In steady state, the maximal pitch deviation for the PID controller is 0.075 rad, for the LQR, it is 0.025 rad, and for the MPC, it is 0.04 rad. The maximum pitch deviation for the PID-based controller is 0.3 rad after the take-off impulse, 0.06 rad for the LQR, and 0.17 rad for the MPC.
Publisher: MDPI AG
Date: 17-07-2021
Abstract: Atmospheric effects have a significant impact on the performance of airborne and space laser systems. Traditional models used to predict propagation effects rely heavily on simplified assumptions of the atmospheric properties and their interactions with laser systems. In the engineering domain, these models need to be continually improved in order to develop tools that can predict laser beam propagation with high accuracy and for a wide range of practical applications such as LIDAR (light detection and ranging), free-space optical communications, remote sensing, etc. The underlying causes of laser beam attenuation in the atmosphere are examined in this paper, with a focus on the dominant linear effects: absorption, scattering, turbulence, and non-linear thermal effects such as blooming, kinetic cooling, and bleaching. These phenomena are quantitatively analyzed, highlighting the implications of the various assumptions made in current modeling approaches. Absorption and scattering, as the dominant causes of attenuation, are generally well captured in existing models and tools, but the impacts of non-linear phenomena are typically not well described as they tend to be application specific. Atmospheric radiative transfer codes, such as MODTRAN, ARTS, etc., and the associated spectral databases, such as HITRAN, are the existing tools that implement state-of-the-art models to quantify the total propagative effects on laser systems. These tools are widely used to analyze system performance, both for design and test/evaluation purposes. However, present day atmospheric radiative transfer codes make several assumptions that reduce accuracy in favor of faster processing. In this paper, the atmospheric radiative transfer models are reviewed highlighting the associated methodologies, assumptions, and limitations. Empirical models are found to offer a robust analysis of atmospheric propagation, which is particularly well-suited for design, development, test and evaluation (DDT& E) purposes. As such, empirical, semi-empirical, and ensemble methodologies are recommended to complement and augment the existing atmospheric radiative transfer codes. There is scope to evolve the numerical codes and empirical approaches to better suit aerospace applications, where fast analysis is required over a range of slant paths, incidence angles, altitudes, and atmospheric conditions, which are not exhaustively captured in current performance assessment methods.
Publisher: Science Publishing Corporation
Date: 09-10-2018
DOI: 10.14419/IJET.V7I4.13.21343
Abstract: The aim of this paper is to introduce the trajectory tracking with a quaternion based quadrotor operation using model predictive control (MPC). Since the efficacy of MPC on a system under noise and disturbance has been distinguished, it is a fair and successful attempt to apply MPC on the quaternion based quadrotor, which is a quite well-known system with uncertainties during operation. Quaternion approaches singularity-free orientation that is advantageous to design any trajectory for quadrotor wherein roll or pitch angle reaches at 90o. As a quaternion, with its four-tuple characteristics that incorporate vector elements, is different from Euler-angle orientation, a new cost function has been developed for the respective MPC controller. In order to achieve singularity-free orientations and abate the model infidelity of the system, the quaternion and MPC algorithm have been incorporated for quadrotor flight. Simulation based results elucidate the success of trajectory tracking of quaternion based dynamics of quadrotor using MPC approach.
Publisher: IOP Publishing
Date: 12-2017
Publisher: Elsevier BV
Date: 04-2017
Publisher: MDPI AG
Date: 16-09-2021
DOI: 10.3390/APP11188617
Abstract: The aim of this work is to evaluate the output of a two-degree of freedom (DOF) proportional integral derivative (PID) controller for controlling elbow flexion and extension on an upper limb rehabilitation robot of an existing model. Since the usage of upper limb rehabilitation is increasing dramatically because of human impairment, 2DOF has been proposed in this work as a suitable controller. The 2DOF PID controller offers set-point-weight features and, hence, is fast in removing disturbance from the system and ensuring system stability. Importantly, as the system parameters are unknown in this work, the black-box model approach has been taken into consideration, using the MATLAB System identification toolbox to estimate a model. The best-fitted estimated model is then coupled with the proposed controller in the MATLAB/Simulink environment that, upon successful simulation works, leads, finally, to the hardware implementation. Three different litudes of sinusoidal current signals, such as 0.3 s, 0.2 s, and 0.1 s, are applied for hardware measurements. Considering patients’ physical conditions. In this work, the 2DOF controller offers a fast transient response, settling time, negligible tracking error and 0% overshoot and undershoot.
Publisher: Springer Science and Business Media LLC
Date: 26-07-2019
Publisher: MDPI AG
Date: 17-05-2021
DOI: 10.3390/TECHNOLOGIES9020037
Abstract: The quadrotor is an ideal platform for testing control strategies because of its non-linearity and under-actuated configuration, allowing researchers to evaluate and verify control strategies. Several control strategies are used, including Proportional-Integral-Derivative (PID), Linear Quadratic Regulator (LQR), Backstepping, Feedback Linearization Control (FLC), Sliding Mode Control (SMC), and Model Predictive Control (MPC), Neural Network, H-infinity, Fuzzy Logic, and Adaptive Control. However, due to several drawbacks, such as high computation, a large amount of training data, approximation error, and the existence of uncertainty, the commercialization of those control technologies in various industrial applications is currently limited. This paper conducts a thorough analysis of the current literature on the effects of multiple controllers on quadrotors, focusing on two separate approaches: (i) controller hybridization and (ii) controller development. Besides, the limitations of the previous works are discussed, challenges and opportunities to work in this field are assessed, and potential research directions are suggested.
Publisher: MDPI AG
Date: 15-10-2021
DOI: 10.3390/ELECTRONICS10202516
Abstract: This study introduces a Direct Model Reference Adaptive Control (DMRAC) algorithm in a buck–boost converter in the power distribution of an electric vehicle. In this study, DMRAC was used in order to overcome the system nonlinearity due to load demand variation, in case of different driving modes (such as acceleration, stable and regenerative braking system mode), and the presence of disturbances in the system. DMRAC receives popularity because of its robustness in the presence of nonlinearity and ensuring system stability. To evaluate the efficacy of DMRAC in the current system, its performance was compared with a PI controller in the MATLAB/Simulink environment. The simulation results show the superiority of DMRAC over a conventional PI control approach, in both variable load demand and disturbed system cases that were measured by tracking error. The improvement was seen in the DMRAC response, with smaller tracking error and faster transient and disturbance rejection. The main contribution of this work is in introducing DMRAC, particularly in a buck–boost converter, and its efficacy with a DC–DC converter for an electric vehicle, which has not been studied before.
Publisher: IOP Publishing
Date: 11-2017
Publisher: Universiti Malaysia Pahang Publishing
Date: 09-10-2023
Publisher: SAGE Publications
Date: 2011
DOI: 10.1068/D11709
Abstract: Extending research into material, media, and cultural geographies of the home, our interest turns to the spatiotemporality of dwelling with information and communication technologies. We pose a number of questions: How do inhabitants and their media stuff adapt to the more rigid physical spaces of a building? How does the building respond to the more rapid changes to dwelling produced by this media stuff? And how are these differing times synchronised? In answer to these questions we present four case studies of homes in Melbourne, Australia, each representative of a particular strategy of synchronisation. They are: the found home, the imagined home, the designed home, and the renovated home. We identify logics informing these homes: the first naturalises the choices made, the second rationalises choices, and the third is one in which dwelling and (re)building are intertwined.
Location: No location found
No related grants have been discovered for Maidul Islam.