ORCID Profile
0000-0002-6511-6464
Current Organisations
University of South Australia
,
The University of Newcastle
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Royal Society of Chemistry (RSC)
Date: 2012
DOI: 10.1039/C2SM25221J
Publisher: IOP Publishing
Date: 30-04-2010
DOI: 10.1088/0957-4484/21/21/215102
Abstract: This paper presents a novel and facile method for the generation of efficient antibacterial coatings which can be applied to practically any type of substrate. Silver nanoparticles were stabilized with an adsorbed surface layer of polyvinyl sulphonate (PVS). This steric layer provided excellent colloidal stability, preventing aggregation over periods of months. PVS-coated silver nanoparticles were bound onto amine-containing surfaces, here produced by deposition of an allylamine plasma polymer thin film onto various substrates. SEM imaging showed no aggregation upon surface binding of the nanoparticles they were well dispersed on amine surfaces. Such nanoparticle-coated surfaces were found to be effective in preventing attachment of Staphylococcus epidermidis bacteria and also in preventing biofilm formation. Combined with the ability of plasma polymerization to apply the thin polymeric binding layer onto a wide range of materials, this method appears promising for the fabrication of a wide range of infection-resistant biomedical devices.
Publisher: MDPI AG
Date: 02-10-2018
DOI: 10.3390/S18103308
Abstract: Quantum dots are attractive alternatives to organic fluorophores for the purposes of fluorescent labeling and the detection of biomarkers. They can also be made to specifically target a protein of interest by conjugating biomolecules, such as antibodies. However, the majority of the fluorescent labeling using quantum dots is done using toxic materials such as cadmium or lead due to the well-established synthetic processes for these quantum dots. Here, we demonstrate the use of indium phosphide quantum dots with a zinc sulfide shell for the purposes of labeling and the detection of exosomes derived from the THP-1 cell line (monocyte cell line). Exosomes are nano-sized vesicles that have the potential to be used as biomarkers due to their involvement in complex cell processes. However, the lack of standardized methodology around the detection and analysis of exosomes has made it difficult to detect these membrane-containing vesicles. We targeted a protein that is known to exist on the surface of the exosomes (CD63) using a CD63 antibody. The antibody was conjugated to the quantum dots that were first made water-soluble using a ligand-exchange method. The conjugation was done using carbodiimide coupling, and was confirmed using a range of different methods such as dynamic light scattering, surface plasmon resonance, fluorescent microscopy, and Fourier transform infrared spectroscopy. The conjugation of the quantum dot antibody to the exosomes was further confirmed using similar methods. This demonstrates the potential for the use of a non-toxic conjugate to target nano-sized biomarkers that could be further used for the detection of different diseases.
Publisher: Springer Science and Business Media LLC
Date: 26-03-2021
DOI: 10.1007/S00604-021-04790-5
Abstract: Extracellular vesicles are spherical nanoparticles inherently released by almost all cell types. They acquire the cell's membrane and cytoplasmic characteristics offering abundant identical units that can be captured to recognize the cell of origin. The abundance of vital cell information and multifunctional roles in cellular processes has rendered them attention, particularly as promising biomarkers for disease diagnosis and use in potential drug delivery systems. This review provides insights into standard approaches towards cultivation and isolation of mammalian and bacterial extracellular vesicles. We assess gaps in conventional separation and detection technologies while also tracking developments in ongoing research. The review focuses on highlighting alternative state-of-the-art microfluidic devices that offer avenues for fast, cost-effective, precision-oriented capture and sensing of extracellular vesicles. Combining different detection technologies on an integrated "lab-on-a-chip" system has the prospective to provide customizable opportunities for clinical use of extracellular vesicles in disease diagnostics and therapeutic applications.
Publisher: American Chemical Society (ACS)
Date: 21-06-2022
Publisher: Elsevier BV
Date: 2013
Publisher: Royal Society of Chemistry (RSC)
Date: 2013
DOI: 10.1039/C3RA23193C
Publisher: MDPI AG
Date: 27-06-2019
DOI: 10.3390/APP9132604
Abstract: Cantilever devices have found applications in numerous scientific fields and instruments, including the atomic force microscope (AFM), and as sensors to detect a wide range of chemical and biological species. The mechanical properties, in particular, the spring constant of these devices is crucial when quantifying adhesive forces, material properties of surfaces, and in determining deposited mass for sensing applications. A key component in the spring constant of a cantilever is the plan-view shape. In recent years, the trapezoidal plan-view shape has become available since it offers certain advantages to fast-scanning AFM and can improve sensor performance in fluid environments. Euler beam equations relating cantilever stiffness to the cantilever dimensions and Young’s modulus have been proven useful and are used extensively to model cantilever mechanical behaviour and calibrate the spring constant. In this work, we derive a simple correction factor to the Euler beam equation for a beam-shaped cantilever that is applicable to any cantilever with a trapezoidal plan-view shape. This correction factor is based upon previous analytical work and simplifies the application of the previous researchers formula. A correction factor to the spring constant of an AFM cantilever is also required to calculate the torque produced by the tip when it contacts the s le surface, which is also dependent on the plan-view shape. In this work, we also derive a simple expression for the torque for triangular plan-view shaped cantilevers and show that for the current generation of trapezoidal plan-view shaped AFM cantilevers, this will be a good approximation. We shall apply both these correction factors to determine Young’s modulus for a range of trapezoidal-shaped AFM cantilevers, which are specially designed for fast-scanning. These types of AFM probes are much smaller in size when compared to standard AFM probes. In the process of analysing the mechanical properties of these cantilevers, important insights are also gained into their spring constant calibration and dimensional factors that contribute to the variability in their spring constant.
Publisher: Springer Science and Business Media LLC
Date: 12-11-2019
DOI: 10.1007/S42452-019-1646-2
Abstract: Since their discovery, extracellular vesicles have gained considerable scientific interest as a novel drug delivery system. In particular, outer membrane vesicles (OMVs) play a critical role in bacteria–bacteria communication and bacteria–host interactions by trafficking cell signalling biochemicals (i.e. DNA, RNA, proteins). Although previous studies have focused on the use of OMVs as vaccines, little work has been done on loading them with functional nanomaterials for drug delivery. We have developed a novel drug delivery system by loading OMVs with gold nanoparticles (AuNPs). AuNPs are versatile nanoparticles that have been extensively used in disease therapeutics. The particles were loaded into the vesicles via electroporation, which uses an electric pulse to create a short-lived electric field. The resulting capacitance on the membrane generates pores in the lipid bilayer of the OMVs allowing AuNPs (or any nanoparticle under 10 nm) inside the vesicles. Closure of the pores of the lipid membrane of the OMVs entraps the nanoparticles as cargo. Transmission electron microscopy was used to confirm the loading of AuNPs inside the OMVs and dynamic light scattering (DLS) and cryogenic scanning electron microscopy (cryo-SEM) verified the size and integrity of the OMVs. This is the first report to load nanoparticles into OMVs, demonstrating a potential method for drug delivery.
Publisher: IOP Publishing
Date: 14-09-2011
DOI: 10.1088/0957-4484/22/41/415601
Abstract: Nanoporous alumina (PA) arrays produced by self-ordering growth, using electrochemical anodization, have been extensively explored for potential applications based upon the unique thermal, mechanical and structural properties, and high surface-to-volume ratio of these materials. However, the potential applications and functionality of these materials may be further extended by molecular-level engineering of the surface of the pore rims. In this paper we present a method for the generation of chemical gradients on the surface of PA arrays based upon plasma co-polymerization of two monomers. We further extend these chemical gradients, which are also gradients of surface charge, to those of bound ligands and number density gradients of nanoparticles. The latter represent a highly exotic new class of materials, comprising aligned PA, capped by gold nanoparticles around the rim of the pores. Gradients of chemistry, ligands and nanoparticles generated by our method retain the porous structure of the substrate, which is important in applications that take advantage of the inherent properties of these materials. This method can be readily extended to other porous materials.
Publisher: MDPI AG
Date: 24-07-2019
DOI: 10.3390/NANO9081065
Abstract: Redox active, photoluminescent silver nanoclusters templated with oligonucleotides were developed for glucose sensing. The silver nanoclusters had a photoluminescent emission at 610 nm that reversibly changed to 530 nm upon oxidation. The reversible emission change was measured with photoluminescent spectroscopy and used to detect H2O2, which is a by-product of the reaction of glucose with glucose oxidase. The ratio of the un-oxidised emission peak (610 nm) and the oxidised analogue (530 nm) was used to measure glucose concentrations up to 20 mM, well within glucose levels found in blood. Also, the reversibility of this system enables the silver nanoclusters to be reused.
Publisher: American Chemical Society (ACS)
Date: 19-05-2015
DOI: 10.1021/ACS.LANGMUIR.5B00586
Abstract: Silver nanoparticles are well-known for their antibacterial properties. However, the detailed mechanism describing the interaction between the nanoparticles and a cell membrane is not fully understood, which can impede the use of the particles in biomedical applications. Here, a tethered bilayer lipid membrane has been used as a model system to mimic a natural membrane and to study the effect of exposure to small silver nanoparticles with diameters of about 2 nm. The solid supported membrane architecture allowed for the application of surface analytical techniques such as electrochemical impedance spectroscopy and atomic force microscopy. Exposure of the membrane to solutions of the silver nanoparticles led to a small but completely reversible perturbation of the lipid bilayer.
Publisher: Springer Science and Business Media LLC
Date: 15-10-2020
DOI: 10.1038/S41598-020-73243-5
Abstract: The physical characterisation, capture and detection of extracellular vesicles (EVs) and exosomes derived from breath condensate is reported. Breath-derived EVs were isolated from breath condensate and captured on a gold substrate using two complimentary methods. The characterised and isolated EVs were detected using surface plasmon resonance (SPR) and electrochemical impedance spectroscopy (EIS). EIS was done using aptamers as a targeting moiety and showed a larger change in resistance between dilute concentrations of EVs (less than 7 μg/mL).This is the first report of EVs and exosomes isolated and characterised from breath. In addition, EVs from a non-invasive and easily available source such as breath opens up further avenues in the detection of pulmonary diseases.
Publisher: SPIE-Intl Soc Optical Eng
Date: 29-02-2012
Publisher: American Chemical Society (ACS)
Date: 08-02-2011
DOI: 10.1021/JP111221G
Publisher: Frontiers Media SA
Date: 27-03-2018
Publisher: MDPI AG
Date: 07-12-2021
DOI: 10.3390/NANO11123317
Abstract: Acinetobacter baumannii is a remarkable microorganism known for its ersity of habitat and its multi-drug resistance, resulting in hard-to-treat infections. Thus, a sensitive method for the identification and detection of Acinetobacter baumannii is vital. However, current methods used for the detection of pathogens have not improved in the past decades and suffer from long process times and low detection limits. A cheap, quick, and easy detection mechanism is needed. In this work, we successfully prepared indium phosphide quantum dots with a zinc sulphide shell, conjugated to a targeting aptamer ligand, to specifically label Acinetobacter baumannii. The system retained both the photophysical properties of the quantum dots and the folded structure and molecular recognition function of the aptamer, therefore successfully targeting Acinetobacter baumannii. Confocal microscopy and transmission electron microscopy showed the fluorescent quantum dots surrounding the Acinetobacter baumannii cells confirming the specificity of the aptamer conjugated to indium phosphide quantum dots with a zinc sulphide shell. Controls were undertaken with a different bacteria species, showing no binding of the aptamer conjugated quantum dots. Our strategy offers a novel method to detect bacteria and engineer a scalable platform for fluorescence detection, therefore improving current methods and allowing for better treatment.
Publisher: IOP Publishing
Date: 14-08-2023
Abstract: Extracellular vesicles are nano- to micro-sized structures that carry biomolecules between cells to coordinate cellular activity and communication. Isolation and characterisation must be standardised to better understand the role of extracellular vesicles and how they can be used for disease diagnosis. Here we use atomic force microscopy to determine the physical differences between extracellular vesicles isolated using two different methods. Extracellular vesicles were isolated using two standardised methods, vacuum filtration and syringe filtration. In addition, extracellular vesicles were immobilised to plain mica and amino-functionalised mica to observe differences in adhesion onto substrates with different hydrophobicity. The application of atomic force microscopy enabled the study of vesicle adhesion, size distribution and morphology on the two different surfaces. It was found that both the isolation method and the substrate had a considerable effect on the physical properties of the extracellular vesicles, such as root mean square roughness values and size distribution. This demonstrates the ability to use atomic force microscopy to gain a more detailed understanding of the physical features of extracellular vesicles and the influence of different isolation methods on their morphology.
Publisher: Elsevier
Date: 2019
No related grants have been discovered for Renee Goreham.