ORCID Profile
0000-0001-8714-3781
Current Organisation
Universidade Nova de Lisboa
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Elsevier BV
Date: 11-2020
Publisher: Elsevier BV
Date: 11-2011
Publisher: MDPI AG
Date: 19-01-2022
DOI: 10.3390/W14030292
Abstract: Natural disasters (such as earthquakes, floods, heatwaves and landslides), isolation and war affect the water access of millions of people worldwide. Developments in the areas of membrane filtration, photolysis and photocatalysis are important for safe water production and water re-use applications. This work aimed to test alternative ways to ensure effective disinfection of wastewater effluents: light-emitting diodes that emit at different wavelengths, photocatalytic membranes, and the combination of the two solutions. The different treatment processes were tested at the laboratory scale to assess their performance in the removal and inactivation of water quality indicator bacteria and fungi present in wastewater effluents. The membranes were found to be effective to retain the microorganisms (rejection values higher than 96%), while three small ultraviolet C light-emitting diodes that emitted light at 255 and 265 nm showed an excellent performance for inactivation (higher than 2.5-log inactivation of total coliforms and Escherichia coli after 10 min of exposure in real wastewater effluents). When photocatalytic membranes are used, ultraviolet A light-emitting diodes ensured effective treatment of the retentate (higher than 65%). The combination of these two processes is extremely promising since it ensures not only the production of a high quality permeate that can be reused, but also the treatment of the retentate.
Publisher: MDPI AG
Date: 13-09-2019
DOI: 10.3390/CATAL9090769
Abstract: A new hybrid photocatalytic membrane reactor that can easily be scaled-up was designed, assembled and used to test photocatalytic membranes developed using the sol–gel technique. Extremely high removals of total suspended solids, chemical oxygen demand, total organic carbon, phenolic and volatile compounds were obtained when the hybrid photocatalytic membrane reactor was used to treat olive mill wastewaters. The submerged photocatalytic membrane reactor proposed and the modified membranes represent a step forward towards the development of new advanced treatment technology able to cope with several water and wastewater contaminants.
Publisher: Wiley
Date: 29-03-2011
DOI: 10.1002/JCTB.2613
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C6PY01870J
Abstract: Preparation of porous membranes from PMAA- b -PMMA copolymers and magnetic iron oxide nanoparticles and their performance under magnetic fields.
Publisher: Elsevier BV
Date: 09-2018
Publisher: MDPI AG
Date: 02-02-2021
DOI: 10.3390/MEMBRANES11020105
Abstract: In this study, we report the impact of the magnetic field on protein permeability through magnetic-responsive, block copolymer, nanocomposite membranes with hydrophilic and hydrophobic characters. The hydrophilic nanocomposite membranes were composed of spherical polymeric nanoparticles (NPs) synthesized through polymerization-induced self-assembly (PISA) with iron oxide NPs coated with quaternized poly(2-dimethylamino)ethyl methacrylate. The hydrophobic nanocomposite membranes were prepared via nonsolvent-induced phase separation (NIPS) containing poly (methacrylic acid) and meso-2,3-dimercaptosuccinic acid-coated superparamagnetic nanoparticles (SPNPs). The permeation experiments were carried out using bovine serum albumin (BSA) as the model solute, in the absence of the magnetic field and under permanent and cyclic magnetic field conditions OFF/ON (strategy 1) and ON/OFF (strategy 2). It was observed that the magnetic field led to a lower reduction in the permeate fluxes of magnetic-responsive membranes during BSA permeation, regardless of the magnetic field strategy used, than that obtained in the absence of the magnetic field. Nevertheless, a comparative analysis of the effect caused by the two cyclic magnetic field strategies showed that strategy 2 allowed for a lower reduction of the original permeate fluxes during BSA permeation and higher protein sieving coefficients. Overall, these novel magneto-responsive block copolymer nanocomposite membranes proved to be competent in mitigating biofouling phenomena in bioseparation processes.
Publisher: Elsevier BV
Date: 11-2006
Publisher: Wiley
Date: 19-07-2018
Abstract: This article presents the synthesis of poly(methacrylic acid)-b-poly(methyl methacrylate) diblock copolymer via polymerization-induced self-assembly in the presence of iron-oxide nanoparticles. Detailed phase diagrams with and without inorganic nanoparticles were constructed. Scanning transmission electron microscopy and energy dispersive X-ray photometry studies confirme the decoration of the polymeric nanoparticles with the iron-oxide nanoparticles. These hybrid nanoparticles were used to prepare porous thin film membranes by spin coating. Finally, the magneto-responsive properties of the membranes were assessed using water filtration tests in the presence and absence of a magnetic field.
Publisher: Elsevier BV
Date: 12-2019
Publisher: Elsevier BV
Date: 04-2018
Publisher: Elsevier BV
Date: 06-2017
Publisher: Elsevier BV
Date: 04-2013
DOI: 10.1016/J.JBIOTEC.2012.06.026
Abstract: In the present study, the performance of a membrane bioreactor (MBR) was modelled using a hybrid approach based on the activated sludge model number 3 (ASM3) combined with projection to latent structures (PLS) to predict the residuals of the ASM. The application of ASM to MBRs requires frequent re-calibration to adjust the model to variations in influent characteristics, determined through time-consuming analysis and batch tests. Considering this problem, the objective of this study was to improve ASM prediction ability with minimal additional monitoring effort. Hybrid models were developed to predict three MBR performance parameters: mixed liquor suspended solids (MLSS), COD in the permeate (CODp) and nitrite and nitrate concentration in the permeate (NOxp). For PLS modelling of ASM residuals three input strategies were used: (1) analytic and operating data (2) operating data plus 2D fluorescence spectroscopy (3) all the data. The first input strategy improved ASM prediction of the three selected outputs, and highlighted the lack of detailed and real-time information from wastewater and operating parameters in the ASM used in this study. In the second input strategy, the incorporation of updated data from 2D fluorescence spectroscopy resulted on better model fitting than in the first input strategy, for all the output parameters studied. Through the hybrid modelling approach it was possible to significantly improve the ASM predictions in real-time using 2D fluorescence measurements and other relevant parameters acquired on-line, without requiring further laboratory analysis. Furthermore, the third input strategy, incorporating all the collected data, did not significantly improve the prediction of the outputs beyond the second strategy. This shows that 2D fluorescence spectroscopy is a comprehensive monitoring tool, able to capture on-line the required information to complement, through hybrid modelling, the mechanistic information described by an ASM.
Publisher: Elsevier BV
Date: 07-2012
DOI: 10.1016/J.WATRES.2012.04.010
Abstract: This work presents the development of multivariate statistically-based models for monitoring several key performance parameters of membrane bioreactors (MBR) for wastewater treatment. This non-mechanistic approach enabled the deconvolution of 2D fluorescence spectroscopy data, a powerful technique that has previously been shown to capture important information regarding MBR performance. Projection to latent structure (PLS) modelling was used to integrate 2D fluorescence data, after compression through parallel factor analysis (PARAFAC), with operation and analytical data to describe an MBR fouling indicator (transmembrane pressure, TMP), five descriptors of the effluent quality (total COD, soluble COD, concentration of nitrite and nitrate, total nitrogen and total phosphorus in the permeate) and the biomass concentration in the bioreactor (MLSS). A multilinear correlation was successfully established for TMP, CODtp and CODsp, whereas the optimised models for the remaining outputs included quadratic and interaction terms of the compressed 2D fluorescence matrices. Additionally, the coefficients of the optimised models revealed important contributions of some of the input parameters to the modelled outputs. This work demonstrates the applicability of 2D fluorescence and statistically-based models to simultaneously monitor multiple key MBR performance parameters with minimal analytical effort. This is a promising approach to facilitate the implementation of MBR technology for wastewater treatment.
Publisher: Elsevier BV
Date: 03-2008
Publisher: CRC Press
Date: 18-02-2016
DOI: 10.1201/B19227
Publisher: IWA Publishing
Date: 04-2011
DOI: 10.2166/WST.2011.195
Abstract: The application of membrane bioreactors (MBR) for wastewater treatment is growing worldwide due to their compactness and high effluent quality. However, membrane fouling, mostly associated to biological products, can reduce MBR performance. Therefore, it is important to monitor MBRs as close to real-time as possible to accelerate control actions for maximal biological and membrane performance. 2D-fluorescence spectroscopy is a promising on-line tool to simultaneously monitor wastewater treatment efficiency and the formation of potential biological fouling agents. In this study, 2D-fluorescence data obtained from the wastewater and the permeate of a MBR was successfully modelled using projection to latent structures (PLS) to monitor variations in the influent and effluent total chemical oxygen demand (COD). Analysis of the results also indicated that humic acids and proteins highly contributed to the measured COD in both streams. Nevertheless, this approach was not valid for other performance parameters of the MBR system (such as influent and effluent ammonia and phosphorus), which is usually characterised through a high number of analytical and operating parameters. Principal component analysis (PCA) was thus used to find possible correlations between these parameters, in an attempt to reduce the analytical effort required for full MBR characterisation and to reduce the time frame necessary to obtain monitoring results. The 3 first principal components, capturing 57% of the variance, indicated and confirmed expected relationships between the assessed parameters. However, this approach alone could not provide robust enough correlations to enable the elimination of parameters for process description (PCA loadings ≤ 0.5). Nevertheless, it is possible that the information captured by 2D-fluorescence spectroscopy could replace some of the analytical and operating parameters, since this technique was able to successfully describe influent and effluent total COD. It is thus proposed that combined modelling of 2D-fluorescence data and selected performance/operating parameters should be further explored for efficient MBR monitoring aiming at rapid process control.
Publisher: Elsevier BV
Date: 03-2022
Publisher: MDPI AG
Date: 06-12-2019
DOI: 10.3390/MOLECULES24244481
Abstract: This work described a new sustainable method for the fabrication of ceramic membranes with high photocatalytic activity, through a simple sol-gel route. The photocatalytic surfaces, prepared at low temperature and under solvent-free conditions, exhibited a narrow pore size distribution and homogeneity without cracks. These surfaces have shown a highly efficient and reproducible behavior for the degradation of methylene blue. Given their characterization results, the microfiltration photocatalytic membranes produced in this study using solvent-free conditions are expected to effectively retain microorganisms, such as bacteria and fungi that could then be inactivated by photocatalysis.
Publisher: MDPI AG
Date: 22-06-2022
Abstract: The development of effective disinfection treatment processes is crucial to help the water industry cope with the inevitable challenges resulting from the increase in human population and climate change. Climate change leads to heavy rainfall, flooding and hot weather events that are associated with waterborne diseases. Developing effective treatment technologies will improve our resilience to cope with these events and our capacity to safeguard public health. A submerged hybrid reactor was used to test the efficiency of membrane filtration, direct photolysis (using ultraviolet-C low-pressure mercury l s, as well as ultraviolet-C and ultraviolet-A light-emitting diodes panels) and the combination of both treatment processes (membrane filtration and photolysis) to retain and inactivate water quality indicator bacteria. The developed photocatalytic membranes effectively retained the target microorganisms that were then successfully inactivated by photolysis and advanced oxidation processes. The new hybrid reactor could be a promising approach to treat drinking water, recreational water and wastewater produced by different industries in small-scale systems. Furthermore, the results obtained with membranes coated with titanium dioxide and copper combined with ultraviolet-A light sources show that the process may be a promising approach to guarantee water disinfection using natural sunlight.
Publisher: Elsevier BV
Date: 15-06-2009
DOI: 10.1016/J.JHAZMAT.2008.10.094
Abstract: Mercury (Hg) is the most highly toxic heavy metal, and must be removed from waterways to very low levels. Biologically mediated mercury removal is an emerging technology that has the potential to be robust, efficient and cost-effective. In this study, the impact of carbon source on the behaviour and microbial community composition of mixed microbial cultures was evaluated, and their performance was compared with a pure culture of Pseudomonas putida spi3. Glucose and acetate, two carbon sources that are commonly present in wastewaters, were chosen for this study. Distinct microbial populations were enriched with each carbon source. Glucose led to a more suitable microbial culture for Hg(2+) bioreduction that was able to reduce Hg(2+) at faster rates when compared to acetate. Furthermore, acetate consistently led to poorer process performance, irrespective of the microbial culture, possibly due to the formation of mercuric acetate complexes. It is proposed that glucose can be a more beneficial carbon source than acetate for the successful operation of Hg bioremediation systems.
Publisher: Elsevier BV
Date: 02-2021
Publisher: MDPI AG
Date: 30-12-2021
Abstract: The combination of photocatalysis and membrane filtration in a single reactor has been proposed, since the photocatalytic treatment may degrade the pollutants retained by the membrane and reduce fouling. However, polymeric membranes can be susceptible to degradation by UV radiation and free radicals. In the present study, five commercial polymeric membranes were exposed to ultraviolet (UV) radiation before and after applying a sol–gel coating with TiO2 nanoparticles. Membrane stability was characterized by changes in hydrophilicity as well as analysis of soluble substances and nanoparticles detached into the aqueous medium, and by Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), and energy-dispersive X-ray spectrometry (EDS) for structural, morphological, and elemental distribution analysis, respectively. The TiO2 coating conferred photocatalytic properties to the membranes and protected them during 6 h of UV radiation exposures, reducing or eliminating chemical and morphological changes, and in some cases, improving their mechanical resistance. A selected commercial nanofiltration membrane was coated with TiO2 and used in a hybrid reactor with a low-pressure UV l , promoting photocatalysis coupled with cross-flow filtration in order to remove 17α-ethinylestradiol spiked into an aqueous matrix, achieving an efficiency close to 100% after 180 min of combined filtration and photocatalysis, and almost 80% after 90 min.
Publisher: Elsevier BV
Date: 07-2009
DOI: 10.1016/J.JHAZMAT.2008.11.038
Abstract: The accumulation of nitrate in closed marine systems presents a problem for both the marine life and the environment. The present study, proposes the application of the ion exchange membrane bioreactor (IEMB) concept for removing nitrate from marine systems, such as aquaculture tanks or marine aquariums. The results obtained demonstrate that the IEMB was able to remove naturally accumulated nitrate from water taken from a public marine aquarium (Oceanário de Lisboa) and bioconvert it, in an isolated compartment (biocompartment), to molecular nitrogen, thus preventing secondary contamination of the treated water by microbial cells, metabolic by-products and excess of carbon source (ethanol). This system allowed for the removal of nitrate at concentrations of 251 and 380 mg/l down to below 27 mg/l exchanging it for chloride. Under the studied operating conditions, the IEMB proves to be a selective nitrate removing technology preserving the initial water composition with respect to cations, due to the Donnan exclusion effect from the membrane, and minimizing the counter diffusion of anions other than nitrate and chloride, due to the use of water with the same ionic composition in the biocompartment. This is an advantage of the IEMB concept, since the quality of the water produced would allow for the reutilisation of the treated water in the aquarium, thereby reducing both the wastewater volume and the use of fresh water.
Publisher: Elsevier BV
Date: 09-2012
DOI: 10.1016/J.WATRES.2012.05.045
Abstract: The biological degradation of nitrate and perchlorate was investigated in an ion exchange membrane bioreactor (IEMB) using a mixed anoxic microbial culture and ethanol as the carbon source. In this process, a membrane-supported biofilm reduces nitrate and perchlorate delivered through an anion exchange membrane from a polluted water stream, containing 60 mg/L of NO₃⁻ and 100 μg/L of ClO₄⁻. Under ammonia limiting conditions, the perchlorate reduction rate decreased by 10%, whereas the nitrate reduction rate was unaffected. Though nitrate and perchlorate accumulated in the bioreactor, their concentrations in the treated water (2.8 ± 0.5 mg/L of NO₃⁻ and 7.0 ± 0.8 μg/L of ClO₄⁻, respectively) were always below the drinking water regulatory levels, due to Donnan dialysis control of the ionic transport in the system. Kinetic parameters determined for the mixed microbial culture in suspension showed that the nitrate reduction rate was 35 times higher than the maximum perchlorate reduction rate. It was found that perchlorate reduction was inhibited by nitrate, since after nitrate depletion perchlorate reduction rate increased by 77%. The biofilm developed in the IEMB was cryosectioned and the microbial population was analyzed by fluorescence in situ hybridization (FISH). The results obtained seem to indicate that the kinetic advantage of nitrate reduction favored accumulation of denitrifiers near the membrane, whereas per(chlorate) reducing bacteria were mainly positioned at the biofilm outer surface, contacting the biomedium. As a consequence of the biofilm stratification, the reduction of perchlorate and nitrate occur sequentially in space allowing for the removal of both ions in the IEMB.
Publisher: Elsevier BV
Date: 02-2020
Publisher: American Chemical Society (ACS)
Date: 30-10-2020
Publisher: MDPI AG
Date: 08-07-2022
DOI: 10.3390/MEMBRANES12070697
Abstract: This study covers the modification, (bio)fouling characterization, use, and cleaning of commercial heterogeneous anion exchange membranes (AEMs) to evaluate their feasibility for reverse electrodialysis (RED) applications. A surface modification with poly (acrylic) acid resulted in an improved monovalent perm-selectivity (decreased sulfate membrane transport rate). Moreover, we evaluated the (bio)fouling potential of the membrane using sodium dodecyl sulfate (SDS), sodium dodecyl benzenesulfonate (SDBS), and Aeromonas hydrophila as model organic foulants and a biofoulant, respectively. A detailed characterization of the AEMs (water contact angle, ion exchange capacity (IEC), scanning electron microscopy (SEM), cyclic voltammetry (CV), and Fourier Transform Infrared (FTIR) spectra) was carried out, verifying that the presence of such foulants reduces IEC and the maximum current obtained by CV. However, only SDS and SDBS affected the contact angle values. Cleaning of the biofouled membranes using a sodium hypochlorite aqueous solution allows for (partially) recovering their initial properties. Furthermore, this work includes a fouling characterization using real surface and sea water matrixes, confirming the presence of several types of fouling microorganisms in natural streams. A lower adhesion of microorganisms (measured in terms of total bacteria counts) was observed for the modified membranes compared to the unmodified ones. Finally, we propose a cleaning strategy to mitigate biofouling in AEMs that could be easily applied in RED systems for an enhanced long-term process performance.
Publisher: Elsevier BV
Date: 2014
DOI: 10.1016/J.JHAZMAT.2013.10.067
Abstract: Mercury is a highly toxic heavy metal that causes human health problems and environmental contamination. In this study, an ion exchange membrane bioreactor (IEMB) process was developed to achieve Hg(II) removal from drinking water and industrial effluents. Hg(II) transport through a cation exchange membrane was coupled with its bioreduction to Hg(0) in order to achieve Hg removal from concentrated streams, with minimal production of contaminated by-products observed. This study involves (1) membrane selection, (2) demonstration of process effectiveness for removing Hg from drinking water to below the 1ppb recommended limit, and (3) process application for treatment of concentrated water streams, where >98% of the Hg was removed, and the throughput of contaminated water was optimised through membrane pre-treatment. The IEMB process represents a novel mercury treatment technology with minimal generation of contaminated waste, thereby reducing the overall environmental impact of the process.
Publisher: Elsevier BV
Date: 07-2018
DOI: 10.1016/J.CARBPOL.2018.03.010
Abstract: The purpose of this work is the development and characterisation of new hybrid polysaccharide (FucoPol) membranes. These membranes were prepared by incorporation of a SiO
No related grants have been discovered for João Crespo.