ORCID Profile
0000-0002-4724-0429
Current Organisation
UNW
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C6LC00911E
Abstract: This paper presents the mechanism of a water-head-driven oscillator and shows the generation of droplets with low interfacial tension.
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C4RA16696E
Abstract: This paper presents the realization of low, constant opening threshold pressures of an elastomeric valve by appropriate design and surface coating of the valve in a self-oscillating microfluidic device.
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2020
Publisher: Springer Science and Business Media LLC
Date: 24-01-2018
Publisher: Wiley
Date: 27-01-2017
Abstract: Microfluidic systems with modular components are attractive alternatives to monolithically integrated microfluidic systems because of their flexibility. In this study, we apply the modular concept on a water-head-pressure-driven microfluidic oscillator and obtain a widely tunable flow rate and fluidic switching period. Modular fluidic resistors can be easily mounted onto and demounted from a main chip by means of plastic male connectors. The connectors enable a leak-free connection between the modular resistors and main chip (leakage pressure > 140 kPa). With modular resistors, we show independent control of the flow rate and flow switching period of the oscillator system in a wide range (2.5 s-6.4 h and 2 μL/min-2 mL/min). This modular approach can be used to enhance the flexibility of instruction-embedded microfluidic circuits in which their operational range is limited.
Publisher: Springer Science and Business Media LLC
Date: 10-2021
Publisher: Elsevier BV
Date: 08-2018
Publisher: Elsevier BV
Date: 02-2020
Publisher: American Chemical Society (ACS)
Date: 19-07-2019
DOI: 10.1021/ACSSENSORS.9B01057
Abstract: Multiplexed analysis of biochemical analytes such as proteins, enzymes, and immune products using a microfluidic device has the potential to cut assay time, reduce s le volume, realize high-throughput, and decrease experimental error without compromising sensitivity. Despite these huge benefits, the need for expensive specialized equipment and the complex photolithography fabrication process for the multiplexed devices have, to date, prevented widespread adoption of microfluidic systems. Here, we present a simple method to fabricate a new microfluidic-based multiplexed biosensing device by taking advantage of 3D-printing. The device is an integration of normally closed (NC) microfluidic valving units which offer superior operational flexibility by using PDMS membrane (
No related grants have been discovered for Bac Van Dang.