ORCID Profile
0000-0002-9391-9387
Current Organisation
Stockholm University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Elsevier BV
Date: 03-2013
DOI: 10.1016/J.CHROMA.2013.01.032
Abstract: Microfluidic devices have shown great potential for the production of positron emission tomography (PET) radiotracers, but most devices have focused only on the synthesis step of the procedure, typically neglecting the other important steps such as [(18)F]fluoride pre-concentration and radiotracer purification that could equally benefit from miniaturisation. Here, we demonstrate the development of microfluidic modules for the purification of PET radiotracers, particularly 2-[(18)F]fluoro-2-deoxy-d-glucose ([(18)F]FDG), via the use of on-chip solid-phase extraction (SPE). In these initial tests, the SPE modules were able to yield [(18)F]FDG with up to 90% radiochemical purity, and methods are proposed for further increasing this value.
Publisher: Springer Science and Business Media LLC
Date: 23-01-2019
DOI: 10.1038/S41598-018-36828-9
Abstract: We demonstrate for the first time the direct stereolithographic 3D printing of an extrinsically self-healing composite, comprised of commercial photocurable resin modified with anisole and PMMA-filled microcapsules. The composites demonstrate solvent-welding based autonomous self-healing to afford 87% recovery of the initial critical toughness. This work illustrates the potential of stereolithographic printing to fabricate self-healing composites with user-defined structures, avoiding the need for extensive rheological optimization of printing inks, like in direct-write 3D printing. Importantly, this work also demonstrates the inclusion of microcapsules into 3D printing resins to incorporate additional functionality into printed composites, which could be adapted for applications beyond self-healing materials.
Publisher: Elsevier BV
Date: 07-2011
DOI: 10.1016/J.CHROMA.2011.05.062
Abstract: Microfluidic approaches have demonstrated a relevant impact on radiochemical reactions involving Positron Emission Tomography (PET) nuclides, due to shorter reaction times and smaller precursor quantities. However, little attention has been given to the integration of the initial pre-concentration and drying of radioactive [(18)F]fluoride ions, required for the labeling of radiotracer compounds. In this work we report the design, fabrication and implementation of a glass microfluidic device filled with recyclable anion exchange particles for the repeated recovery of [(18)F] and [(19)F]fluoride ions. The device was first tested with non radioactive [(19)F]fluoride ions and it was shown to repeatedly trap and elute >95% fluoride over 40 successive experimental runs with no decrease in efficiency. The same device was then tested for the trapping and release of [(18)F]fluoride ions over 20 experiments with no measurable decrease in performance. Finally, the [(18)F]fluoride ions were eluted as a K(18)F/K2.2.2 complex, dried by repeated dissolution in acetonitrile and evaporation of residual water, and reacted with ethyl ditosylate (EtDT) leading to the desired product ([(18)F]fluoroethyltosylate) with 96 ± 3% yield (RCY). The overall time needed for conditioning, trapping, elution and regeneration was less than 6 min. This approach will be of great benefit towards an integrated platform able to perform faster and safer radiochemical synthesis on the micro-scale.
Location: United Kingdom of Great Britain and Northern Ireland
Location: United Kingdom of Great Britain and Northern Ireland
No related grants have been discovered for Nicole Pamme.