ORCID Profile
0000-0002-6585-8898
Current Organisations
University of New South Wales
,
University of Sydney
,
Macquarie University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Institute of Physics, Polish Academy of Sciences
Date: 05-2022
Publisher: American Chemical Society (ACS)
Date: 10-10-2013
DOI: 10.1021/MA401478T
Publisher: Elsevier BV
Date: 08-2016
Publisher: Elsevier BV
Date: 05-2021
Publisher: Elsevier BV
Date: 02-2021
Publisher: Elsevier BV
Date: 04-2008
Publisher: Elsevier BV
Date: 2017
Publisher: MDPI AG
Date: 19-03-2023
DOI: 10.3390/S23063245
Abstract: Thermoplastic polyurethane (TPU) has been widely used as the elastic polymer substrate to be combined with conductive nanomaterials to develop stretchable strain sensors for a variety of applications such as health monitoring, smart robotics, and e-skins. However, little research has been reported on the effects of deposition methods and the form of TPU on their sensing performance. This study intends to design and fabricate a durable, stretchable sensor based on composites of thermoplastic polyurethane and carbon nanofibers (CNFs) by systematically investigating the influences of TPU substrates (i.e., either electrospun nanofibers or solid thin film) and spray coating methods (i.e., either air-spray or electro-spray). It is found that the sensors with electro-sprayed CNFs conductive sensing layers generally show a higher sensitivity, while the influence of the substrate is not significant and there is no clear and consistent trend. The sensor composed of a TPU solid thin film with electro-sprayed CNFs exhibits an optimal performance with a high sensitivity (gauge factor ~28.2) in a strain range of 0–80%, a high stretchability of up to 184%, and excellent durability. The potential application of these sensors in detecting body motions has been demonstrated, including finger and wrist-joint movements, by using a wooden hand.
Publisher: Wiley
Date: 15-04-2008
DOI: 10.1002/APP.28032
Publisher: Elsevier BV
Date: 02-2021
Publisher: Elsevier BV
Date: 03-2018
Publisher: IEEE
Date: 12-2019
Publisher: Elsevier BV
Date: 05-2023
Publisher: Springer Science and Business Media LLC
Date: 25-02-2021
DOI: 10.1038/S41598-021-84083-2
Abstract: Recent discoveries of two-dimensional transitional metal based materials have emerged as an excellent candidate for fabricating nanostructured flame-retardants. Herein, we report an eco-friendly flame-retardant for flexible polyurethane foam (PUF), which is synthesised by hybridising MXene (Ti $$_3\\hbox {C}_2$$ 3 C 2 ) with biomass materials including phytic acid (PA), casein, pectin, and chitosan (CH). Results show that coating PUFs with 3 layers of CH/PA/Ti $$_3\\hbox {C}_2$$ 3 C 2 via layer-by-layer approach reduces the peak heat release and total smoke release by 51.1% and 84.8%, respectively. These exceptional improvements exceed those achieved by a CH/Ti $$_3\\hbox {C}_2$$ 3 C 2 coating. To further understand the fundamental flame and smoke reduction phenomena, a pyrolysis model with surface regression was developed to simulate the flame propagation and char layer. A genetic algorithm was utilised to determine optimum parameters describing the thermal degradation rate. The superior flame-retardancy of CH/PA/Ti $$_3\\hbox {C}_2$$ 3 C 2 was originated from the shielding and charring effects of the hybrid MXene with biomass materials containing aromatic rings, phenolic and phosphorous compounds.
Publisher: Wiley
Date: 20-11-2022
Abstract: Wearable temperature sensors with high accuracy are critical for human health monitoring. Ideally, they should show accuracy matching that of medical‐grade thermometers (i.e., ± ≈0.1–0.2 °C). Achieving this goal has proven challenging for sensors that must also meet key wearable requirements, such as flexibility, stretchability, and breathability. Herein, a new stretchable supercapacitive temperature sensor with a resolution of ±0.2 °C, is presented, which was achieved by. Two new strategies to increase temperature sensitivity and minimize the interferences of mechanical stretching and pressure: a) synthesizing an ion‐conductive NaCl‐organogel to serve as the redox‐active separator to increase sensitivity and suppress interference of compression and b) using a kirigami design to decrease the interference of stretch and improve breathability. These two novel strategies endow the supercapacitive temperature sensors with a temperature accuracy of ±0.2 °C and exceptionally high sensitivity of 0.095 °C −1 , which is more than 13 times higher than traditional dielectric‐capacitive sensors. The potential of the supercapacitive sensor in measuring body temperature is demonstrated by continuously monitoring skin temperatures under a medical compression garment that exerts pressure on the skin and the unsteady wrist flexion. The findings confirm that the organogel‐based supercapacitive sensors offer an extraordinary temperature accuracy significantly better than wearable sensors reported in the literature. The combined characteristics of high resolution, linearity, breathability, and stretchability make this sensor a promising candidate for skin‐interfaced health monitoring devices.
Publisher: Springer Science and Business Media LLC
Date: 2022
Publisher: Elsevier BV
Date: 09-2018
Publisher: Wiley
Date: 05-03-2019
Publisher: Wiley
Date: 25-10-2023
Abstract: In recent years, wearable sensors and energy harvesters have shown great potential for a wide range of applications in personalized healthcare, robotics, and human–machine interfaces. Among different types of materials used in wearable electronics, piezoelectric materials have gained enormous attention due to their exclusive ability to harvest energy from ambient sources. Piezoelectric materials can be utilized as sensing elements in wearable sensors while harvesting biomechanical energy. Electrospun piezoelectric polymer nanofibers are extensively investigated due to their high flexibility, ease of processing, biocompatibility, and higher piezoelectric property (in contrast to their corresponding cast films). However, as compared to piezoceramic materials, they mostly exhibit relatively lower piezoelectric coefficients. Therefore, considerable efforts have been devoted to improving the piezoelectricity of electrospun polymer nanofibers recently, resulting in significant advances. This review presents a broad overview of these advances including new material, structure designs as well as new strategies to enhance piezoelectricity of electrospun polymer nanofibers. The challenges in achieving high mechanical performance as well as high piezoelectricity are particularly discussed. The main motivation of this review is to examine these challenges and highlight effective approaches to achieving high‐performance piezoelectric sensors and energy harvesters for wearable technologies.
Publisher: Elsevier BV
Date: 09-2017
Publisher: Elsevier BV
Date: 06-2021
Publisher: Elsevier BV
Date: 11-2019
Publisher: Elsevier BV
Date: 08-2018
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 12-2019
Publisher: American Physical Society (APS)
Date: 27-02-2023
Publisher: American Chemical Society (ACS)
Date: 17-04-2020
Publisher: Elsevier BV
Date: 03-2016
Publisher: American Chemical Society (ACS)
Date: 13-09-2021
Publisher: Elsevier BV
Date: 04-2022
Publisher: Royal Society of Chemistry (RSC)
Date: 2011
DOI: 10.1039/D1TA06978K
Abstract: Precise skin temperature monitoring with a 0.14 °C resolution is realized through (a) reducing strain interference with an optimized kirigami pattern and (b) increasing temperature sensitivity with low melting temperature TPU as the dielectric core.
Publisher: Elsevier BV
Date: 04-2019
Publisher: Informa UK Limited
Date: 30-03-2017
Publisher: Elsevier BV
Date: 12-2022
Publisher: Royal Society of Chemistry (RSC)
Date: 2020
DOI: 10.1039/D0TA05129B
Abstract: A new highly sensitive and stretchable strain sensor with excellent linearity and optical transparency has been developed by toughening of microcracks within the thin conductive films.
Publisher: Elsevier BV
Date: 11-2015
Publisher: Elsevier BV
Date: 05-2018
DOI: 10.1016/J.TIBTECH.2018.02.013
Abstract: For a century-old problem, edema and its treatment have gone remarkably unnoticed by the biomedical community. Given the prevalence of lymphedema and its debilitating repercussions, there is an acute need for both efficacy-based measures and clinical standards to guide compression garment design and therapeutic application. This review outlines the current state of the art in compression treatment and suggests an integrated biomedical engineering approach going forward. Characterizing the pressure gradient profiles of commercial compression sleeves is necessary to better understand the role of compression treatment in the mitigation of swelling. Integration of pressure sensor technologies with advanced materials design and manufacture provides a critical path not only to elucidate the mechanisms of but also to improve on current compression-based therapies and associated therapeutic devices.
Publisher: IEEE
Date: 12-2019
Publisher: American Chemical Society (ACS)
Date: 24-04-2012
DOI: 10.1021/MA300458Y
Publisher: Wiley
Date: 11-06-2018
Publisher: Elsevier BV
Date: 09-2015
Publisher: Elsevier BV
Date: 09-2008
Publisher: Elsevier BV
Date: 05-2023
Publisher: IEEE
Date: 20-06-2021
Publisher: The Royal Society
Date: 12-2021
Abstract: Monitoring human respiratory patterns is of great importance as it gives essential information for various medical conditions, e.g. sleep apnoea syndrome and chronic obstructive pulmonary disease and asthma, etc. Herein, we have developed a polymeric airflow sensor based on nanocomposites of vertically grown graphene nanosheets (VGNs) with polydimethylsiloxane (PDMS) and explored their applications in monitoring human respiration. The sensing performance of the VGNs/PDMS nanocomposite was characterized by exposing to a range of airflow rates (20–130 l min −1 ), and a linear performance with high sensitivity and low response time (mostly below 1 s) was observed. To evaluate the experimental results, finite-element simulation models were developed in the COMSOL Multiphysics package. The piezoresistive properties of VGNs/PDMS thin film and fluid–solid interaction were thoroughly studied. Laser Doppler vibrometry measures of sensor tip displacement closely approximated simulated deflection results and validated the dynamic response of the sensor. By comparing the proposed sensor and some other airflow sensors in the literature, it is concluded that the VGNs/PDMS airflow sensor has excellent features in terms of sensor height, detection range and sensitivity. The potential application of the VGNs/PDMS airflow sensor in detecting the respiration pattern of human exercises like walking, jogging and running has been demonstrated.
Publisher: Elsevier BV
Date: 02-2020
Publisher: American Chemical Society (ACS)
Date: 15-07-2020
Publisher: Elsevier BV
Date: 11-2015
Publisher: Elsevier BV
Date: 06-2015
Publisher: American Chemical Society (ACS)
Date: 17-04-2017
Abstract: Highly flexible and deformable electrically conductive materials are vital for the emerging field of wearable electronics. To address the challenge of flexible materials with a relatively high electrical conductivity and a high elastic limit, we report a new and facile method to prepare porous polydimethylsiloxane/carbon nanofiber composites (denoted by p-PDMS/CNF). This method involves using sugar particles coated with carbon nanofibers (CNFs) as the templates. The resulting three-dimensional porous nanocomposites, with the CNFs embedded in the PDMS pore walls, exhibit a greatly increased failure strain (up to ∼94%) compared to that of the solid, neat PDMS (∼48%). The piezoresistive response observed under cyclic tension indicates that the unique microstructure provides the new nanocomposites with excellent durability. The electrical conductivity and the gauge factor of this new nanocomposite can be tuned by changing the content of the CNFs. The electrical conductivity increases, while the gauge factor decreases, upon increasing the content of CNFs. The gauge factor of the newly developed sensors can be adjusted from approximately 1.0 to 6.5, and the nanocomposites show stable piezoresistive performance with fast response time and good linearity in ln(R/R
Publisher: Elsevier BV
Date: 03-2019
Publisher: Elsevier BV
Date: 08-2018
Publisher: MDPI AG
Date: 17-05-2018
Publisher: Elsevier BV
Date: 11-2017
Publisher: Royal Society of Chemistry (RSC)
Date: 2021
DOI: 10.1039/D1TA08521B
Abstract: In this work, we present a new method of creating fibre-metal composites to effectively modulate the in-plane fracture behaviour of brittle conductive thin metal films on stretchable PDMS substrates via insertion of a toughening interlayer of CNFs.
Publisher: Elsevier BV
Date: 09-2019
Publisher: Wiley
Date: 06-09-2020
Publisher: Elsevier BV
Date: 2023
Publisher: Elsevier BV
Date: 09-2022
Publisher: Wiley
Date: 12-2010
Publisher: Elsevier BV
Date: 10-2018
Publisher: Royal Society of Chemistry (RSC)
Date: 2013
DOI: 10.1039/C2SM27512K
Publisher: Elsevier BV
Date: 11-2022
Publisher: Elsevier BV
Date: 2008
Publisher: Elsevier BV
Date: 11-2018
Publisher: Wiley
Date: 26-09-2020
DOI: 10.1002/POL.20200567
Publisher: Elsevier BV
Date: 09-2023
Publisher: American Chemical Society (ACS)
Date: 07-09-2016
Abstract: Strain sensors with high elastic limit and high sensitivity are required to meet the rising demand for wearable electronics. Here, we present the fabrication of highly sensitive strain sensors based on nanocomposites consisting of graphene aerogel (GA) and polydimethylsiloxane (PDMS), with the primary focus being to tune the sensitivity of the sensors by tailoring the cellular microstructure through controlling the manufacturing processes. The resultant nanocomposite sensors exhibit a high sensitivity with a gauge factor of up to approximately 61.3. Of significant importance is that the sensitivity of the strain sensors can be readily altered by changing the concentration of the precursor (i.e., an aqueous dispersion of graphene oxide) and the freezing temperature used to process the GA. The results reveal that these two parameters control the cell size and cell-wall thickness of the resultant GA, which may be correlated to the observed variations in the sensitivities of the strain sensors. The higher is the concentration of graphene oxide, then the lower is the sensitivity of the resultant nanocomposite strain sensor. Upon increasing the freezing temperature from -196 to -20 °C, the sensitivity increases and reaches a maximum value of 61.3 at -50 °C and then decreases with a further increase in freezing temperature to -20 °C. Furthermore, the strain sensors offer excellent durability and stability, with their piezoresistivities remaining virtually unchanged even after 10 000 cycles of high-strain loading-unloading. These novel findings pave the way to custom design strain sensors with a desirable piezoresistive behavior.
Publisher: Elsevier BV
Date: 10-2021
Publisher: Elsevier BV
Date: 06-2008
Publisher: Elsevier BV
Date: 04-2023
Publisher: Elsevier BV
Date: 08-2022
Publisher: Wiley
Date: 14-09-2022
Abstract: Flow sensors play a critical role in monitoring flow parameters, including rate, velocity, direction, and rotation frequency. In this paper, inspired by biological hair cells in the human vestibular system, an innovative flow sensor is developed based on polyvinyl alcohol (PVA) hydrogel nanocomposites with a maze‐like network of vertically grown graphene nanosheets (VGNs). The VGNs/PVA hydrogel absorbs a copious amount of water when immersed in water, making the sensor highly sensitive to tiny stimuli underwater. The sensor demonstrates a high sensitivity (5.755 mV (mm s −1 ) −1 ) and extremely low velocity detection (0.022 mm s −1 ). It also reveals outstanding performance in detecting low‐frequency oscillatory flows down to 0.1 Hz, which make it suitable for many biomedical applications. As one of the potential applications of the sensor, it exhibits excellent performance in mimicking various physiological conditions of vestibular hair cells. To explain the experimental results, a complete finite element simulation is developed to model the piezoresistive effect of VGNs/PVA thin film structure. This is the first attempt to develop hydrogel–graphene nanosheet‐based flow sensors, which creates the closest artificial sensor to vestibular hair cells. This miniaturized hair cell sensor paves the way for utilizing hydrogels to develop next‐generation of ultrasensitive flow sensors for biomedical applications.
Publisher: Wiley
Date: 24-05-2022
Publisher: Elsevier BV
Date: 04-2020
Publisher: Elsevier BV
Date: 2021
Publisher: Wiley
Date: 03-09-2022
Abstract: Wearable sensors are emerging as a new technology to detect physiological and biochemical markers for remote health monitoring. By measuring vital signs such as respiratory rate, body temperature, and blood oxygen level, wearable sensors offer tremendous potential for the noninvasive and early diagnosis of numerous diseases such as Covid‐19. Over the past decade, significant progress has been made to develop wearable sensors with high sensitivity, accuracy, flexibility, and stretchability, bringing to reality a new paradigm of remote health monitoring. In this review paper, the latest advances in wearable sensor systems that can measure vital signs at an accuracy level matching those of point‐of‐care tests are presented. In particular, the focus of this review is placed on wearable sensors for measuring respiratory behavior, body temperature, and blood oxygen level, which are identified as the critical signals for diagnosing and monitoring Covid‐19. Various designs based on different materials and working mechanisms are summarized. This review is concluded by identifying the remaining challenges and future opportunities for this emerging field.
Publisher: Wiley
Date: 15-02-2023
Abstract: Electrospun polyvinylidene fluoride (PVDF) nanofibers have been widely used in the fabrication of flexible piezoelectric sensors and nanogenerators, due to their excellent mechanical properties. However, their relatively low piezoelectricity is still a critical issue. Herein, a new and effective route to enhance the piezoelectricity of PVDF nanofiber mats by electrospraying zinc oxide (ZnO) nanoparticles between layers of PVDF nanofibers is demonstrated. As compared to the conventional way of dispersing ZnO nanoparticles into PVDF solution for electrospinning nanofiber mats, this approach results in multilayered PVDF+ZnO nanofiber mats with significantly increased piezoelectricity. For ex le, 6.2 times higher output is achieved when 100% of ZnO (relative to PVDF quantity) is electrosprayed between PVDF nanofibers. Moreover, this new method enables higher loading of ZnO without having processing challenges and the maximum peak voltage of ≈3 V is achieved, when ZnO content increases up to 150%. Additionally, it is shown that the s les with equal amount of material but consisting of different number of layers have no significant difference. This work demonstrates that the proposed multilayer design provides an alternative strategy to enhance the piezoelectricity of PVDF nanofibers, which can be readily scaled up for mass production.
Publisher: Elsevier BV
Date: 05-2023
Publisher: Elsevier BV
Date: 08-2016
Publisher: American Chemical Society (ACS)
Date: 23-08-2023
Publisher: Royal Society of Chemistry (RSC)
Date: 2012
DOI: 10.1039/C1SM06244A
Publisher: Wiley
Date: 29-11-2022
Abstract: Structural defects are ubiquitous for polycrystalline perovskite films, compromising device performance and stability. Herein, a universal method is developed to overcome this issue by incorporating halide perovskite quantum dots (QDs) into perovskite polycrystalline films. CsPbBr 3 QDs are deposited on four types of halide perovskite films (CsPbBr 3 , CsPbIBr 2 , CsPbBrI 2 , and MAPbI 3 ) and the interactions are triggered by annealing. The ions in the CsPbBr 3 QDs are released into the thin films to passivate defects, and concurrently the hydrophobic ligands of QDs self‐assemble on the film surfaces and grain boundaries to reduce the defect density and enhance the film stability. For all QD‐treated films, PL emission intensity and carrier lifetime are significantly improved, and surface morphology and composition uniformity are also optimized. Furthermore, after the QD treatment, light‐induced phase segregation and degradation in mixed‐halide perovskite films are suppressed, and the efficiency of mixed‐halide CsPbIBr 2 solar cells is remarkably improved to over 11% from 8.7%. Overall, this work provides a general approach to achieving high‐quality halide perovskite films with suppressed phase segregation, reduced defects, and enhanced stability for optoelectronic applications.
Publisher: MDPI AG
Date: 21-09-2022
Abstract: Natural fibre biopolymer composites with both fibres and matrix being derived from biomaterials are increasingly used in demanding applications, such as sensing, packaging, building, and transport, and require good electrical, thermal, and flame retardant properties. Herein, an investigation of the effectiveness of functionalising nonwoven cotton oly(lactic acid) (PLA) fibre mats with graphene oxide nanosheets has been reported by using a facile dip-coating method followed by thermal reduction for enhancing the electric, thermal, and abrasion-resistance properties. The manufacturing processes for preparing biocomposites and introducing functionality are readily scalable. Experimental results reveal that with the addition of less than 0.5 wt% graphene nanoplatelets, the biocomposites showed significant improvements in abrasion resistance, electrical conductivity, thermal conductivity, and diffusivity. Furthermore, the composite shows excellent piezo-resistivity to act as strain sensors with a gauge factor of 2.59 at strains up to 1%.
Publisher: Springer Science and Business Media LLC
Date: 11-05-2020
DOI: 10.1007/S40820-020-00446-W
Abstract: This paper suggests development of a flexible, lightweight, and ultra-sensitive piezoresistive flow sensor based on vertical graphene nanosheets (VGNs) with a mazelike structure. The sensor was thoroughly characterized for steady-state and oscillatory water flow monitoring applications. The results demonstrated a high sensitivity (103.91 mV (mm/s) −1 ) and a very low-velocity detection threshold (1.127 mm s −1 ) in steady-state flow monitoring. As one of many potential applications, we demonstrated that the proposed VGNs/PDMS flow sensor can closely mimic the vestibular hair cell sensors housed inside the semicircular canals (SCCs). As a proof of concept, magnetic resonance imaging of the human inner ear was conducted to measure the dimensions of the SCCs and to develop a 3D printed lateral semicircular canal (LSCC). The sensor was embedded into the artificial LSCC and tested for various physiological movements. The obtained results indicate that the flow sensor is able to distinguish minute changes in the rotational axis physical geometry, frequency, and litude. The success of this study paves the way for extending this technology not only to vestibular organ prosthesis but also to other applications such as blood/urine flow monitoring, intravenous therapy (IV), water leakage monitoring, and unmanned underwater robots through incorporation of the appropriate packaging of devices.
Publisher: American Chemical Society (ACS)
Date: 26-09-2018
Abstract: Here, we report a new type of strain sensors consisting of vertical graphene nanosheets (VGNs) with mazelike network, sandwiched between poly(dimethylsiloxane) (PDMS) substrates. The new sensors outperform most graphene thin-film-based sensors reported previously and show an outstanding combination of high stretchability of ∼120%, excellent linearity over the entire detection range, and high sensitivity with a gauge factor of ∼32.6. The sensitivity can be tuned by controlling the thickness of VGNs, with sensors consisting of thicker VGNs showing higher sensitivity but slightly lower stretchability (the maximum gauge factor is ∼88.4 with a maximum detection strain of ∼55%). Detailed microscopic examinations reveal that the ultrahigh sensitivity stems from the formation of microcracks initiated in the buffer layer. These microcracks are bridged by strings of graphene/PDMS, enabling the conductive network to continue to function up to a strain level significantly higher than that of previously reported graphene thin-film-based sensors. Furthermore, the present sensors have been found to be insensitive to temperatures and various liquids, including water and 0.1 mol L
Publisher: American Chemical Society (ACS)
Date: 13-09-2021
Abstract: With an ageing population, hearing disorders are predicted to rise considerably in the following decades. Thus, developing a new class of artificial auditory system has been highlighted as one of the most exciting research topics for biomedical applications. Herein, a design of a biocompatible piezoresistive-based artificial hair cell sensor is presented consisting of a highly flexible and conductive polyvinyl alcohol (PVA) nanocomposite with vertical graphene nanosheets (VGNs). The bilayer hydrogel sensor demonstrates excellent performance to mimic biological hair cells, responding to acoustic stimuli in the audible range between 60 Hz to 20 kHz. The sensor output demonstrates stable mid-frequency regions (∼4-9 kHz), with the greatest sensitivity as high frequencies (∼13-20 kHz). This is somewhat akin to the mammalian auditory system, which has remarkable sensitivity and sharp tuning at high frequencies due to the "active process". This work validates the PVA/VGN sensor as a potential candidate to play a similar functional role to that of the cochlear hair cells, which also operate over a wide frequency domain in a viscous environment. Further characterizations of the sensor show that increasing the sound litude results in higher responses from the sensor while taking it to the depth drops the sensor outputs due to attenuation of sound in water. Meanwhile, the acoustic pressure distribution of sound waves is predicted through finite element analysis, whereby the numerical results are in perfect agreement with experimental data. This proof-of-concept work creates a platform for the future design of susceptible, flexible biomimetic sensors to closely mimic the biological cochlea.
Location: Australia
No related grants have been discovered for Shuying Wu.