ORCID Profile
0000-0002-0556-6404
Current Organisation
University of New South Wales
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
In Research Link Australia (RLA), "Research Topics" refer to ANZSRC FOR and SEO codes. These topics are either sourced from ANZSRC FOR and SEO codes listed in researchers' related grants or generated by a large language model (LLM) based on their publications.
Sensor Technology (Chemical aspects) | Nanomaterials | Analytical Chemistry | Medical Devices | Nanotechnology | Nanobiotechnology | Immunological and Bioassay Methods
Diagnostic Methods | Expanding Knowledge in the Chemical Sciences | Health Status (e.g. Indicators of Well-Being) |
Publisher: American Chemical Society (ACS)
Date: 10-09-2018
Abstract: Cytokine sensing is challenging due to their typically low abundances in physiological conditions. Nanomaterial fabricated interfaces demonstrated unique advantages in ultrasensitive sensing. Here, we demonstrate an erometric sensing device based on graphene oxide (GO) and structure-switching aptamers for long-term detection of cytokines in a living organism. The device incorporates a single layer of GO acting as a signal lifier on glassy carbon electrodes. The hairpin aptamers specific to interferon-γ (IFN-γ), which were loaded with redox probes, are covalently attached to GO to serve as biorecognition moieties. IFN-γ was able to trigger the configuration change of aptamers while releasing the trapped redox probes to introduce the electrochemical signal. This in vivo device was capable of quantitatively and dynamically detecting IFN-γ down to 1.3 pg mL
Publisher: Wiley
Date: 09-01-2020
Abstract: Monitoring of human serum albumin (HSA) in a point-of-care fashion is urgently needed in particular for elderly or chronically ill patients. Herein, a dual-state emissive chalcone probe having the feature of aggregation-induced emission was designed and synthesized. The concentration of HSA can be evaluated by the ratios of emission from probes in aggregated and monomeric state, which gives a visually discernible red-to-green color change. A simple, portable paper-based analytical device have been fabricated by integration of the recognition probe in the detection pad and employed for HSA test using the whole blood s les. This paper-based assay shows the analytical capability comparable to the standard testing methods but is in a point-of-care fashion, providing a promising tool for at-home HSA detection and HSA-related disease diagnosis.
Publisher: Elsevier BV
Date: 05-2020
Publisher: Royal Society of Chemistry (RSC)
Date: 2014
DOI: 10.1039/C4RA02247E
Abstract: Facile functionalization of graphene oxide sheets on gold surface results in complexation-enhanced electrochemical detection of heavy metal ions, shown here for Pb 2+ , Cu 2+ and Hg 2+ , with improved detection limits by two orders of magnitude relative to the control electrode.
Publisher: Elsevier BV
Date: 08-2022
DOI: 10.1016/J.BIOS.2022.114251
Abstract: Diabetes is a chronic disease with metabolic disorders. Prediabetes is a condition in which the blood glucose levels are not high enough to be diagnosed as diabetes, but insulin resistance and β-cell dysfunction are simultaneously present. Glucose and insulin are important biomarkers for diagnosing diabetes rediabetes. It is critical and essential to monitor glucose and insulin levels to achieve the early and precise diagnosis, timely prevention and scientific management of diabetes rediabetes. Here, an electrochemical aptasensor on screen-printed carbon electrode (SPCE) was developed for non-invasive simultaneous real-time detection of glucose and insulin in saliva. Two thiolated aptamers specific to glucose and insulin, respectively, were fabricated onto gold nanoparticles (AuNPs) decorated SPCE through Au-S bonds to form the sensing interface terminated with redox probes methylene blue (SPCE-AuNPs-GluApt-MB and SPCE-AuNPs-InsApt-MB). With the electrochemical signal readout on SPCE, the sensing interface responded to glucose linearly in the range of 0.1-50 mM with a detection limit of 0.08 mM, and responded linearly to insulin in the range of 0.05-15 nM with a detection limit of 0.85 nM. Integration of a SPCE based sensing interface with a portable wireless biochip, the continuous real-time detection of glucose and insulin in saliva was successfully realized with smartphone signal readout in a non-invasive way, demonstrating its potential as a non-invasive and reliable tool for precise diagnosis of diabetes rediabetes in a point of care fashion.
Publisher: Elsevier BV
Date: 09-2007
Publisher: AIP Publishing
Date: 10-09-2018
DOI: 10.1063/1.5040861
Abstract: The probing of physiological processes in living organisms is a grand challenge that requires bespoke analytical tools. Optical fiber probes offer a minimally invasive approach to report physiological signals from specific locations inside the body. This perspective article discusses a wide range of such fiber probes developed at the Australian Research Council Centre of Excellence for Nanoscale BioPhotonics. Our fiber platforms use a range of sensing modalities, including embedded nanodiamonds for magnetometry, interferometric fiber cavities for refractive index sensing, and tailored metal coatings for surface plasmon resonance sensing. Other fiber probes exploit molecularly sensitive Raman scattering or fluorescence where optical fibers have been combined with chemical and immunosensors. Fiber imaging probes based on interferometry and computational imaging are also discussed as emerging in vivo diagnostic devices. We provide ex les to illustrate how the convergence of multiple scientific disciplines generates opportunities for the fiber probes to address key challenges in real-time in vivo diagnostics. These future fiber probes will enable the asking and answering of scientific questions that were never possible before.
Publisher: American Chemical Society (ACS)
Date: 05-05-2023
Publisher: Elsevier BV
Date: 02-2023
Publisher: Wiley
Date: 27-06-2012
Publisher: MDPI AG
Date: 31-03-2023
DOI: 10.3390/BIOS13040446
Abstract: An innovative modular approach for facile design and construction of flexible microfluidic biosensor platforms based on a dry manufacturing “craft-and-stick” approach is developed. The design and fabrication of the flexible graphene paper electrode (GPE) unit and polyethylene tetraphthalate sheet (PET)6/adhesive fluidic unit are completed by an economic and generic xurographic craft approach. The GPE widths and the microfluidic channels can be constructed down to 300 μm and 200 μm, respectively. Both units were assembled by simple double-sided adhesive tapes into a microfluidic integrated GPE (MF-iGPE) that are flexible, thin ( .5 mm), and lightweight (0.4 g). We further functionalized the iGPE with Prussian blue and glucose oxidase for the fabrication of MF-iGPE glucose biosensors. With a closed-channel PET fluidic pattern, the MF-iGPE glucose biosensors were packaged and sealed to protect the integrated device from moisture for storage and could easily open with scissors for s le loading. Our glucose biosensors showed 2 linear dynamic regions of 0.05–1.0 and 1.0–5.5 mmol L−1 glucose. The MF-iGPE showed good reproducibility for glucose detection (RSD 6.1%, n = 6) and required only 10 μL of the analyte. This modular craft-and-stick manufacturing approach could potentially further develop along the concept of paper-crafted model assembly kits suitable for low-resource laboratories or classroom settings.
Publisher: American Chemical Society (ACS)
Date: 15-12-2022
Publisher: Elsevier BV
Date: 2017
Publisher: Wiley
Date: 04-12-2021
Abstract: The extraordinary electronic, optical, and mechanical characteristics of 2D materials make them promising candidates for optoelectronics, specifically in infrared (IR) detectors owing to their flexible composition and tunable optoelectronic properties. This review presents the recent progress in IR detectors composed of 2D materials and their hybrid structures, including graphene, black phosphorous, transition metal dichalcogenides, halide perovskite as well as other new layered materials and their heterostructures. The focus is on the short‐wave, mid‐wave, and long‐wave infrared regimes, which pose a grand challenge for rational materials and device designs. The dependence of the device performance on the optical and electronic properties of 2D materials is extensively discussed, aiming to present the general strategies for designing optoelectronic devices with optimal performance. Furthermore, the recent results on 2D material‐based heterostructures are presented with an emphasis on the relationship between band alignment, charge transfer, and IR photodetection. Finally, a summary is given as well as the discussion of existing challenges and future directions.
Publisher: Springer Science and Business Media LLC
Date: 17-08-2021
DOI: 10.1038/S41378-021-00293-8
Abstract: Exosomes are cell-derived nanovesicles that have recently gained popularity as potential biomarkers in liquid biopsies due to the large amounts of molecular cargo they carry, such as nucleic acids and proteins. However, most existing exosome-based analytical sensing methods struggle to achieve high sensitivity and high selectivity simultaneously. In this work, we present an electrochemical micro-aptasensor for the highly sensitive detection of exosomes by integrating a micropatterned electrochemical aptasensor and a hybridization chain reaction (HCR) signal lification method. Specifically, exosomes are enriched on CD63 aptamer-functionalized electrodes and then recognized by HCR products with avidin-horseradish peroxidase (HRP) attached using EpCAM aptamers as bridges. Subsequently, the current signal that is generated through the enzyme reaction between the HRP enzyme and 3,3’,5,5’-tetramethylbenzidine (TMB)/H 2 O 2 directly correlates to the amount of bound HRP on the HCR products and thus to the number of target exosomes. By introducing anti-EpCAM aptamers, micro-aptasensors can detect cancerous exosomes with high specificity. Due to the micropatterned electrodes and HCR dual- lification strategy, the micro-aptasensors achieve a linear detection response for a wide range of exosome concentrations from 2.5×10 3 to 1×10 7 exosomes/mL, with a detection limit of 5×10 2 exosomes/mL. Moreover, our method successfully detects lung cancer exosomes in serum s les of early-stage and late-stage lung cancer patients, showcasing the great potential for early cancer diagnosis.
Publisher: American Association for Cancer Research (AACR)
Date: 16-09-2022
DOI: 10.1158/0008-5472.CAN-22-1203
Abstract: This study reveals that RNA-binding protein MEX3C induces SOCS3 mRNA decay to promote JAK2/STAT3 activation and tumor metastasis in hepatocellular carcinoma, identifying MEX3C targeting as a potential approach for treating metastatic disease.
Publisher: Royal Society of Chemistry (RSC)
Date: 2016
DOI: 10.1039/C6RA04975C
Abstract: AuNP decorated GO nanocomposites (GO-Ph-AuNP) via aryldiazonium salt chemistry have been successfully prepared, which can be used as the immobilization matrix for loading glucose oxidase (GOx) towards a sensitive glucose sensor.
Publisher: American Chemical Society (ACS)
Date: 12-07-2006
DOI: 10.1021/LA0607510
Abstract: The characterization and application of a modified electrode interface for protein electrochemistry is reported. This generic interface is composed of a mixed monolayer of oligo(phenylethynylene) molecular wires (MWs) and poly(ethylene glycol) (PEG) deposited on glassy carbon electrodes by reductive adsorption of the respective aryl diazonium salts. Electrochemistry and scanning electron microscopy demonstrate that the PEG component exhibits a distinct decrease in nonspecific adsorption of blood serum and the proteins bovine serum albumin (BSA) and horseradish peroxidase (HRP) relative to a bare glassy carbon electrode. The ability of the MWs to facilitate efficient electron transfer through the PEG layer to the underlying electrode was demonstrated by covalently attaching ferrocenemethylamine to the end of the MWs. The calculated rate constant for this system was 229 +/- 30 s(-1). Covalent attachment of HRP to the MWs allowed direct electron transfer to the redox protein with almost ideal electrochemistry, indicating a specific interaction between the MW and HRP, with a rate constant of 13.4 +/- 2.3 s(-1). This rate constant is more rapid than previously reported for HRP shown to still be catalytically active. Retained catalytic activity of HRP was demonstrated by the enzyme responding to the addition of hydrogen peroxide. Similarly, by attaching myoglobin to the end of the MWs, a rate constant for this protein of 2 s(-1) was measured. The rigidity of the MWs, as well as it being longer than the PEG diluent, means this generic interface can be employed to investigate the electrochemistry of a wide range of redox proteins.
Publisher: American Chemical Society (ACS)
Date: 10-12-2009
DOI: 10.1021/JP906344U
Abstract: Eight lanthanide(III) oleates have been prepared and characterized. The chelation and self-assembly structures of these rare-earth oleates have been studied by elemental analysis, Fourier transfer infrared spectroscopy (FTIR), and X-ray powder diffraction (XRD) analysis. Elemental analysis and FTIR results indicate that three oleate anions are complexed with one lanthanide cation and, with the exception of anhydrous cerium(III) oleate, form either a mono- or a hemihydrate. The X-ray analysis showed that the neat lanthanide soaps have a lamellar bilayer structure at room temperature. The thermal behavior has been investigated by cross-polarized optical microscopy (POM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). POM scans showed that all the lanthanide oleates form a lamellar phase in the presence of excess water. Small-angle X-ray scattering (SAXS) and XRD were used to investigate the internal structure of the bulk lanthanide oleates in excess water, and these X-ray results confirmed that the lanthanide oleates do not swell in water. Select lanthanide oleates were dispersed in water to form nonswelling lamellar submicrometer particles, confirmed by dynamic light scattering (DLS) and synchrotron SAXS measurements. NMR results indicated that colloidal dispersions of lanthanide oleates containing paramagnetic ions, such as gadolinium(III), terbium(III), and dysprosium(III), have a significant effect on the longitudinal (T(1)) and transverse (T(2)) relaxation times of protons in water. Time-resolved fluorescence measurements have demonstrated that colloidal dispersions of europium(III) oleate exhibit strong luminescence. The rare earth metal soaps exemplify the potential of self-assembled chelating hiphiles as contrast agents in medical imaging modalities such as magnetic resonance imaging (MRI) and fluorescence imaging.
Publisher: Elsevier BV
Date: 08-2020
Publisher: Royal Society of Chemistry (RSC)
Date: 2013
DOI: 10.1039/C3DT32730B
Abstract: A novel, "wet" and "clean" methodology was developed to prepare Fe(x)Co(100-x) nanoparticles on reduced graphene oxide (RGO) surfaces in an aqueous solution through a coreduction process. Without any surface treatment, Fe(x)Co(100-x) nanoparticles can in situ grow on the RGO sheets. It was found that RGO nanosheets can effectively prevent the aggregation of Fe(x)Co(100-x) nanoparticles. The results reveal that the RGO/Fe(x)Co(100-x) nanocomposites have ferromagnetic characteristics and show composition dependent magnetic properties. The effectiveness of the as-prepared RGO/Fe(x)Co(100-x) nanocomposites as solid phase heterogeneous catalysts have been evaluated, for the first time, on the well-known 4-nitrophenol (4-NP) reduction to 4-aminophenol (4-AP) in the presence of excess sodium borohydride. The effect of initial 4-NP concentration, and catalyst loading dose were evaluated. The catalyst efficiency was examined on the basis of turnover frequency (TOF) and recyclability. The RGO/Fe25Co75 nanocomposites exhibit good catalytic activity toward 4-nitrophenol (4-NP) reduction and the graphene oxide (GO) supports also enhance the catalytic activity via a synergistic effect. The as-prepared RGO/Fe(x)Co(100-x) nanocomposite catalysts are very efficient, stable, easy to prepare, eco-friendly, cost-effective, and have potential industrial applications.
Publisher: Wiley
Date: 22-01-2015
Publisher: IEEE
Date: 12-2019
Publisher: Elsevier BV
Date: 05-2016
DOI: 10.1016/J.BIOS.2016.01.020
Abstract: The detection of cytokines in body fluids, cells, tissues and organisms continues to attract considerable attention due to the importance of these key cell signaling molecules in biology and medicine. In this review, we describe recent advances in cytokine detection in the course of ongoing pursuit of new analytical approaches for these trace analytes with specific focus on immunosensing. We discuss recent elegant designs of sensing interface with improved performance with respect to sensitivity, selectivity, stability, simplicity, and the absence of s le matrix effects. Various immunosensing approaches based on multifunctional nanomaterials open novel opportunities for ultrasensitive detection of cytokines in body fluids in vitro and in vivo. Methodologies such as suspension arrays also known as bead assays together with optical fiber-based sensors, on their own or in combination with microfluidic devices will continue to have an important role to address the grand challenge of real-time in vivo multiplex cytokine detection.
Publisher: American Chemical Society (ACS)
Date: 22-01-2018
DOI: 10.1021/ACSSENSORS.7B00720
Abstract: We report an aggregation-induced emission fluorogen (AIEgen)-based turn-on fluorescent aptasensor able to detect the ultrasmall concentration of intracellular IFN-γ. The aptasensor consists of an IFN-γ aptamer labeled with a fluorogen with a typical aggregation-induced emission (AIE) characteristic, which shows strong red emission only in the presence of IFN-γ. The aptasensor is able to effectively monitor intracellular IFN-γ secretion with the lowest detection limit of 2 pg mL
Publisher: Wiley
Date: 28-10-2020
Publisher: Wiley
Date: 06-2006
Publisher: Springer Berlin Heidelberg
Date: 2011
Publisher: Wiley
Date: 10-06-2021
Abstract: Cytokines are critical mediators that oversee and regulate immune and inflammatory responses via complex networks and serve as biomarkers for many diseases. Quantification of cytokines has significant value in both clinical medicine and biology as the levels provide insights into physiological and pathological processes and can be used to aid diagnosis and treatment. Cytokines and their clinical significance are introduced from the perspective of their pro‐ and anti‐inflammatory effects. Factors affecting cytokines quantification in biological fluids, native levels in different body fluids, s le processing and storage conditions, sensitivity to freeze‐thaw, and soluble cytokine receptors are discussed. In addition, recent advances in in vitro and in vivo assays, biosensors based on different signal outputs and intracellular to extracellular protein expression are summarized. Various quantification platforms for high‐sensitivity and reliable measurement of cytokines in different scenarios are discussed, and commercially available cytokine assays are compared. A discussion of challenges in the development and advancement of technologies for cytokine quantification that aim to achieve real‐time multiplex cytokine analysis for point‐of‐care situations applicable for both biomedical research and clinical practice are discussed.
Publisher: Elsevier BV
Date: 2011
DOI: 10.1016/J.BIOS.2010.08.082
Abstract: An immuno-biosensing interface comprising a mixed layer of an oligo(ethylene glycol) (OEG) component, and an oligo(phenylethynylene) molecular wire (MW) is described. The OEG controls the interaction of proteins and electroactive interferences with the surface and the MW allows electrochemical communication to the underlying glassy carbon electrode. The layers are formed from in situ generated-aryl diazonium cations. To the distal end of the MW, a redox probe 1,1'-di(aminomethyl)ferrocene is attached followed by the surface bound epitope (the structural feature the antibody selectively recognizes) to which an antibody would bind. Association or disassociation of the antibody with the sensing interface causes a modulation of the ferrocene electrochemistry. X-ray photoelectron spectroscopy, cyclic voltammetry, and square wave voltammetry have been used to characterize the step-wise fabrication of the sensing interface. The influence of the molar ratio of the MW and OEG deposited onto the sensor interface was explored relative to the final sensor sensitivity. Five combinations of MW/OEG 1:0, 1:20, 1:50, 1:75 and 1:100 were tested on sensor sensitivity detection for a model analyte (biotin) free in solution, via a displacement assay. The ratio of 1:50 was found to give the highest sensitivity. At this ratio, good reproducibility (RSD 6.8%) and repeatability (RSD 9.6%) was achieved. This immuno-biosensor provides an intervention free immuno-biosensing platform for agriculture and biomedical s les.
Publisher: MDPI AG
Date: 04-03-2021
DOI: 10.3390/BIOS11030071
Abstract: Understanding food safety hazard risks is essential to avoid potential negative heath impacts in the food supply chain in a post-COVID-19 pandemic era. Development of strategies for virus direction in foods plays an important role in food safety and verification. Early warning, tracing, and detection should be implemented as an integrated system in order to mitigate thecoronavirus disease 2019 (COVID-19) outbreak, in which the detection of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) is critical as it not only concerns screening of populations but also monitoring of possible contaminated sources such as the food supply chain. In this review, we point out the consequences in different aspects of our daily life in the post-COVID-19 pandemic from the perspective of the food supply chain and the food industry. We summarize the possible transmission routes of COVID-19 in the food supply chain before exploring the development of corresponding detection tools of SARS-CoV-2. Accordingly, we compare different detection methods for the virus in foods, including different pretreatments of food matrices in the virus detection. Finally, the future perspectives are proposed.
Publisher: Elsevier BV
Date: 2013
DOI: 10.1016/J.TALANTA.2012.11.039
Abstract: A label-free immunosensor based on SWNTs modified GC electrodes has been developed for the direct detection of paraoxon. Based on aryldiazonium salt chemistry, forest of SWNTs can be vertically aligned on mixed monolayers of aryldiazonium salt modified GC electrodes by C-C bonding, which provides an interface showing efficient electron transfer between biomolecules. PEG molecules were introduced to the interface to resist non-specific protein adsorption. Ferrocenedimethylamine (FDMA) was subsequently attached to the ends of SWNTs through the amide bonding followed by the attachment of epitope i.e., paraoxon hapten to which a paraoxon antibody would bind. This immunosensor shows good selectivity and high specificity to paraoxon, and is functional for the detection of paraoxon in both laboratory and field by a displacement assay. There is a linear relationship between electrochemical signal of FDMA and the concentration of paraoxon over the range of 2-2500 ppb with a lowest detected limit of 2 ppb in 0.1 M phosphate buffer at pH 7.0. The SWNTs based erometric immunosensor provides an opportunity to develop the sensing system for on-site sensitive detection of a spectrum of insecticides.
Publisher: Elsevier BV
Date: 10-2009
Publisher: American Chemical Society (ACS)
Date: 16-12-2020
Abstract: IL-1β is a potent pro-inflammatory cytokine critical to multiple pathologies in the central nervous system (CNS). Quantification of IL-1β in vivo is challenging due to pM range of IL-1β released in the spinal cord and also the terminal nature of cerebrospinal fluid (CSF) s ling in rodents. Herein we developed a robust in vivo device on stainless steel suitable for detection of IL-1β in the spinal cord of rats. This approach offers high sensitivity (3.2 pg mL
Publisher: Informa UK Limited
Date: 14-04-2017
DOI: 10.1080/10408347.2016.1176889
Abstract: Melamine is a synthetic chemical used in the manufacture of resins, pigments, and superplasticizers. Human beings can be exposed to melamine through various sources such as migration from related products into foods, pesticide contamination, and illegal addition to foods. Toxicity studies suggest that prolonged consumption of melamine could lead to the formation of kidney stones or even death. Therefore, reliable and accurate detection methods are essential to prevent human exposure to melamine. S le preparation is of critical importance, since it could directly affect the performance of analytical methods. Some methods for the detection of melamine include instrumental analysis, immunoassays, and sensor methods. In this paper, we have summarized the state-of-the-art methods used for food s le preparation as well as the various detection techniques available for melamine. Combinations of multiple techniques and new materials used in the detection of melamine have also been reviewed. Finally, future perspectives on the applications of microfluidic devices have also been provided.
Publisher: Elsevier BV
Date: 11-2014
DOI: 10.1016/J.BIOS.2014.06.001
Abstract: This work introduced an efficient approach for modification of AuNPs with multicomponents by diazonium salt couplings. The multifunctionalized AuNPs with protruding functional groups that allow simple bioconjugation to large amounts of biomolecules have been successfully used as electronic bridges and signal lifiers for an electrochemical immunosensor towards the detection of BoNT/A. The one-step anchoring AuNPs strategy has greatly increased the efficiency for attachment of biomolecules and subsequently increased the sensitivity. Sensitivity was further lified by preparation of bioconjugates particles containing horseradish peroxidase (HRP) labels along with detection antibodies (AbL) attached to AuNPs. The immunosensor can be used for the detection of BoNT/A over the range of 4-35 pg mL(-1) with the lowest detection limit of 1 pg mL(-1) and assay time of 10 min. The herein sensing strategy is rapid, robust, selective, sensitive, and is promising for future fabrication of point-of-care devices.
Publisher: Elsevier BV
Date: 04-2018
DOI: 10.1016/J.BIOS.2017.11.023
Abstract: Detection of a very low amount of cytokines such as interleukin-6 (IL-6) in clinical fluids is important in biomedical research and clinical applications. Here, we demonstrate spatially-localized ultrasensitive (femtogram mL
Publisher: Royal Society of Chemistry (RSC)
Date: 2012
DOI: 10.1039/C2AN16034J
Abstract: An electrochemical immuno-biosensor for detecting glycosylated haemoglobin (HbA1c) is reported based on glassy carbon (GC) electrodes with a mixed layer of an oligo(phenylethynylene) molecular wire (MW) and an oligo(ethylene glycol) (OEG). The mixed layer is formed from in situ-generated aryl diazonium cations. To the distal end of the MW, a redox probe 1,1'-di(aminomethyl)ferrocene (FDMA) was attached followed by the covalent attachment of an epitope N-glycosylated pentapeptide (GPP), an analogon to HbA1c, to which an anti-HbA1c monocolonal antibody IgG can selectively bind. HbA1c was detected by a competitive inhibition assay based on the competition for binding to anti-HbA1c IgG antibodies between the analyte in solution, HbA1c, and the surface bound epitope GPP. Exposure of the GPP modified sensing interface to the mixture of anti-HbA1c IgG antibody and HbA1c results in the attenuation of ferrocene electrochemistry due to free antibody binding to the interface. Higher concentrations of analyte led to higher Faradaic currents as less anti-HbA1c IgG is available to bind to the electrode surface. It was observed that there is a good linear relationship between the relative Faradaic current of FDMA and the concentration of HbA1c from 4.5% to 15.1% of total haemoglobin in serum without the need for washing or rinsing steps.
Publisher: American Chemical Society (ACS)
Date: 21-09-2016
DOI: 10.1021/ACS.ANALCHEM.6B02353
Abstract: In this study, a label-free electrochemical immunosensor was developed for detection of cytokine tumor necrosis factor-alpha (TNF-α). First, AuNPs loaded reduced graphene oxides nanocomposites (RGO-ph-AuNP) were prepared, and then, a mixed layer of 4-carbxyphenyl and 4-aminophenyl phosphorylcholine (PPC) was modified to the surface of AuNPs for the subsequent modification of anti-TNF-α capture antibody (Ab
Publisher: CSIRO Publishing
Date: 2011
DOI: 10.1071/CH11002
Abstract: This paper reports the strategy of electrochemically reductive adsorption of aryldiazonium salts on electrodes for designing stable sensing interface. The diazonium salt chemistry can serve as an alternative system to alkanethiol-gold chemistry for the modification of electrode surfaces for biosensor applications.
Publisher: American Association for Cancer Research (AACR)
Date: 31-03-2023
DOI: 10.1158/0008-5472.C.6514187
Abstract: Abstract Tumor metastasis is one of the major causes of high mortality in patients with hepatocellular carcinoma (HCC). Sustained activation of STAT3 signaling plays a critical role in HCC metastasis. RNA binding protein (RBP)–mediated posttranscriptional regulation is involved in the precise control of signal transduction, including STAT3 signaling. In this study, we investigated whether RBPs are important regulators of HCC metastasis. The RBP MEX3C was found to be significantly upregulated in highly metastatic HCC and correlated with poor prognosis in HCC. Mechanistically, MEX3C increased JAK2/STAT3 pathway activity by downregulating SOCS3, a major negative regulator of JAK2/STAT3 signaling. MEX3C interacted with the 3′UTR of SOCS3 and recruited CNOT7 to ubiquitinate and accelerate decay of SOCS3 mRNA. Treatment with MEX3C-specific antisense oligonucleotide significantly inhibited JAK2/STAT3 pathway activation, suppressing HCC migration i in vitro /i and metastasis i in vivo /i . These findings highlight a novel mRNA decay-mediated mechanism for the disruption of SOCS3-driven negative regulation of JAK2/STAT3 signaling, suggesting MEX3C may be a potential prognostic biomarker and promising therapeutic target in HCC. Significance: This study reveals that RNA-binding protein MEX3C induces SOCS3 mRNA decay to promote JAK2/STAT3 activation and tumor metastasis in hepatocellular carcinoma, identifying MEX3C targeting as a potential approach for treating metastatic disease. /
Publisher: Elsevier BV
Date: 02-2016
DOI: 10.1016/J.ACA.2015.12.023
Abstract: A stable label-free erometric immunosensor is presented based on gold nanoparticles and graphene oxide nanocomposites for detection of cardiac troponin-I in the early diagnosis of myocardial infarction. For designing of the sensing platform, firstly the nanocomposites based on GO and AuNPs were prepared and anchored on electrode surfaces. The formed nanocomposites provided a platform with big surface area for loading anti-cTnI capture antibody, and worked as a bridge for fast electron transfer subsequently increased the sensitivity. Moreover, the linkages between AuNP, GO, and electrodes were based on covalent bonding by aryldiazonium salt coupling chemistry, which favors the stability of the sensing interface. Finally, the anti-cTnI detection antibody was immobilized on GO tailored with ferrocene molecules, functioning as the signal reporter for the detection of cTnI. The modification process was monitored using electrochemistry, SEM, XPS. The herein immunosensor demonstrates a good selectivity and high sensitivity against human-cTnI, and is capable of detecting cTnI at concentrations as low as 0.05 ng mL(-1), which is 100 times lower than that possible by conventional methods. It is potential to design the portable sensing platform based on AuNPs and GO nanocomposites for future point-of-care diagnostics.
Publisher: Springer International Publishing
Date: 2021
Publisher: American Association for Cancer Research (AACR)
Date: 31-03-2023
DOI: 10.1158/0008-5472.22432604
Abstract: Supplementary Data from MEX3C-Mediated Decay of SOCS3 mRNA Promotes JAK2/STAT3 Signaling to Facilitate Metastasis in Hepatocellular Carcinoma
Publisher: American Chemical Society (ACS)
Date: 06-02-2017
Abstract: Aryldiazonium salts as coupling agents for surface chemistry have evidenced their wide applications for the development of sensors. Combined with advances in nanomaterials, current trends in sensor science and a variety of particular advantages of aryldiazonium salt chemistry in sensing have driven the aryldiazonium salt-based sensing strategies to grow at an astonishing pace. This review focuses on the advances in the use of aryldiazonium salts for modifying interfaces in sensors and biosensors during the past decade. It will first summarize the current methods for modification of interfaces with aryldiazonium salts, and then discuss the sensing applications of aryldiazonium salts modified on different transducers (bulky solid electrodes, nanomaterials modified bulky solid electrodes, and nanoparticles). Finally, the challenges and perspectives that aryldiazonium salt chemistry is facing in sensing applications are critically discussed.
Publisher: American Chemical Society (ACS)
Date: 23-10-2009
DOI: 10.1021/LA902845J
Abstract: Gadolinium oleate has been added at various concentrations to a Myverol inverse bicontinuous cubic phase forming system, and the potential of these systems as magnetic resonance imaging (MRI) contrast agents has been investigated. Differential scanning calorimetry (DSC), small-angle X-ray scattering (SAXS), and cryo-transmission electron microscopy (cryo-TEM) measurements on the Gd oleate/Myverol systems indicate that Gd oleate is at least partially incorporated within the cubic phase of Myverol. However, at Gd oleate concentrations greater than 1 wt %, partial phase separation of the system may occur with the formation of a Gd-oleate-rich lamellar phase as well as the cubic phase. Bulk Gd oleate/Myverol mixtures can be dispersed into stable colloidal dispersions. SAXS and cryo-TEM measurements on these dispersions indicate that the presence of Gd oleate in the Myverol system prevents the formation of cubosomes from the bulk cubic phase. Instead, the dispersion consists of putative Gd-oleate-rich nonswelling lamellar nanoparticles as well as colloidal particles lacking ordered internal structure. In vitro studies on these dispersions demonstrated that the relaxivity of select Gd oleate/Myverol systems is much higher than that of pure Gd oleate, exemplifying the promise of this system type for magnetic resonance imaging. The highest water proton relaxivities (r(1) = 34.2 mM(-1) s(-1) and r(2) = 27.3 mM(-1) s(-1) at 20 MHz and room temperature) were obtained at a Gd oleate loading concentration of 1 wt %, with a subsequent decrease in relaxivity with increasing Gd oleate concentration. These maximum relaxivities compare favorably with the relaxivities for the commercial contrast agent, Magnevist (r(1) = 4.91 mM(-1) s(-1) and r(2) = 6.26 mM(-1) s(-1) at 20 MHz and room temperature).
Publisher: Wiley
Date: 08-2010
Publisher: IEEE
Date: 02-2010
Publisher: American Association for the Advancement of Science (AAAS)
Date: 10-03-2021
DOI: 10.1126/SCITRANSLMED.AAW9668
Abstract: Modular microparticles induce antigen-specific immune tolerance by inducing apoptosis and promoting T reg differentiation.
Publisher: Wiley
Date: 18-09-2013
Publisher: Elsevier BV
Date: 2019
Publisher: American Chemical Society (ACS)
Date: 19-07-2018
DOI: 10.1021/ACSSENSORS.8B00365
Abstract: Cytokines are small proteins and form complicated cytokine networks to report the status of our health. Thus, accurate profiling and sensitive quantification of multiple cytokines is essential to have a comprehensive and accurate understanding of the complex physiological and pathological conditions in the body. In this study, we demonstrated a robust electrochemical immunosensor for the simultaneous detection of three cytokines IL-6, IL-1β, and TNF-α. First, graphene oxides (GO) were loaded with redox probes nile blue (NB), methyl blue (MB), and ferrocene (Fc), followed by covalent attachment of anti-cytokine antibodies for IL-6, IL-1β, and TNF-α, respectively, to obtain Ab
Publisher: Elsevier BV
Date: 08-2020
Publisher: Elsevier BV
Date: 12-2005
Publisher: American Chemical Society (ACS)
Date: 24-06-2020
Publisher: Springer Nature Switzerland
Date: 2022
Publisher: IEEE
Date: 02-2010
Publisher: American Chemical Society (ACS)
Date: 05-09-2023
Publisher: Elsevier BV
Date: 08-2016
Publisher: American Chemical Society (ACS)
Date: 09-07-2020
Publisher: American Chemical Society (ACS)
Date: 12-07-2022
DOI: 10.1021/ACSSENSORS.2C00854
Abstract: Uric acid (UA) is an important biomarker for many diseases. A sensitive point-of-care (POC) testing platform is designed for the digital quantification of salivary UA based on a colorimetric reaction on an easy-to-build smartphone-assisted microfluidic paper-based analytical device (SμPAD). UA levels are quantified according to the color intensity of Prussian blue on the SμPAD with the aid of a MATLAB code or a smartphone APP. A color correction method is specifically applied to exclude the light effect. Together with the engineering design of SμPADs, the background calibration function with the APP increases the UA sensitivity by 100-fold to reach 0.1 ppm with a linear range of 0.1-200 ppm. The assay time is less than 10 min. SμPADs demonstrate a correlation of 0.97 with a commercial UA kit for the detection of salivary UA in clinical s les. SμPADs provide a sensitive, fast, affordable, and reliable tool for the noninvasive POC quantification of salivary UA for early diagnosis of abnormal UA level-associated health conditions.
Publisher: AIP Publishing
Date: 05-2017
DOI: 10.1063/1.4983666
Publisher: Elsevier BV
Date: 10-2016
Publisher: Wiley
Date: 08-06-2010
Publisher: Springer Nature Singapore
Date: 2022
Publisher: Elsevier BV
Date: 06-2022
DOI: 10.1016/J.BIOS.2022.114109
Abstract: Achieving superhigh sensitivity is the ultimate goal for bio-detection in modern analytical science and life science. Among variable signal lification strategies, nucleic acid lification technologies are revolutionizing the field of bio-detection, providing greater possibilities in novel diagnosis achieving high efficiency, specificity, and cost-effectiveness. Nucleic acid lification techniques (NAATs), such as Polymerase Chain Reaction (PCR), Rolling Circle Amplification (RCA), Loop-Mediated Isothermal Amplification (LAMP), Recombinase Polymerase Amplification (RPA), CRISPR-related lification, and others are dominating methods employed in research and clinical settings. They each provide distinctively unique features that can offer desirable performance in terms of sensitivity, specificity, simplicity, stability, and cost. NAATs are in unmet demand in molecular diagnosis, especially in point-of-care scenario. This review will discuss the principles and recent advancements of each NAAT, respectively, revealing their strengths and challenges in achieving rapid and accurate bio-detection with a focus on point-of-care diagnosis. Furthermore, this review will explore the application of each of the technologies through the contemporary COVID-19 pandemic, analyzing their ability in point-of-care diagnosis of the COVID-19 with high sensitivity to emphasize significance of developing NAATs based methods in battling COVID-19. Finally, advantages and potentials of each NAAT in enhancements of sensitivity and specificity in bio-detection from bench side to the bedside will be discussed, aiming for full exploitation of capability of each NAAT. This review will provide novel aspects in the selection and combination of usages of various NAATs based on their distinctive characteristics and limitations. A possible advancing direction of future accurate POCT is also proposed.
Publisher: American Chemical Society (ACS)
Date: 18-08-2021
Publisher: Elsevier BV
Date: 05-2018
Publisher: Elsevier BV
Date: 10-2020
Publisher: American Chemical Society (ACS)
Date: 24-02-2011
DOI: 10.1021/LA104373V
Abstract: Forming stable gold nanoparticle (AuNP)-modified surface is important for a number of applications including sensing and electrocatalysis. Herein, tethering AuNPs to glassy carbon (GC) surfaces using surface bound diazonium salts is investigated as a strategy to produce stable AuNP surfaces. GC electrodes are first modified with 4-aminophenyl (GC-Ph-NH(2)), and then the terminal amine groups are converted to diazonium groups by incubating the GC-Ph-NH(2) interface in NaNO(2) and HCl solution to form a 4-phenyl diazonium chloride-modified interface (GC-Ph-N(2)(+)Cl(-)). Subsequently AuNPs are immobilized on the interface by electrochemical reduction to give a 4-phenyl AuNP-modified interface (GC-Ph-AuNP). For comparison, 4-aminophenyl AuNP- and 4-thiophenol AuNP-modified GC interfaces (GC-Ph-S-AuNP and GC-Ph-NH-AuNP), in which AuNPs are tethered to the surfaces by forming S-Au and NH-Au bond, respectively, were also prepared. Cyclic voltammetry, electrochemical impedance spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy are used to characterize these fabricated interfaces. The AuNP on GC-Ph-AuNP surfaces demonstrate good stability under sonication in Milli-Q water, during electrochemical treatment in 0.05 M H(2)SO(4) solution, and over several weeks. By contrast, the GC-Ph-NH-AuNP and GC-Ph-S-AuNP surfaces showed significant particle losses under equivalent conditions.
Publisher: IEEE
Date: 12-2019
Publisher: Royal Society of Chemistry (RSC)
Date: 2012
DOI: 10.1039/C1AN15693D
Abstract: A simple colorimetric method for the detection of copper ions in water is described. This method is based on the 'click' copper(I)-catalyzed azide-alkyne cycloaddition reaction and its use in promoting the aggregation of azide-tagged gold nanoparticles by a dialkyne cross-linker is described. Nanoparticle cross-linking, evidenced as a colour change, is used for the detection of copper ions. The lowest detected concentration by the naked eye was 1.8 μM, with the response linear with log(concentration) between 1.8-200 μM. The selectivity relative to other potentially interfering ions was evaluated.
Publisher: Springer Science and Business Media LLC
Date: 26-09-2022
DOI: 10.1038/S41467-022-33285-X
Abstract: Indoleamine 2,3 dioxygenase 1 (IDO1) is an attractive target for cancer immunotherapy. However, IDO1 inhibitors have shown disappointing therapeutic efficacy in clinical trials, mainly because of the activation of the aryl hydrocarbon receptor (AhR). Here, we show a post-transcriptional regulatory mechanism of IDO1 regulated by a proteasome-associated deubiquitinating enzyme, USP14, in colorectal cancer (CRC). Overexpression of USP14 promotes tryptophan metabolism and T-cell dysfunction by stabilizing the IDO1 protein. Knockdown of USP14 or pharmacological targeting of USP14 decreases IDO1 expression, reverses suppression of cytotoxic T cells, and increases responsiveness to anti-PD-1 in a MC38 syngeneic mouse model. Importantly, suppression of USP14 has no effects on AhR activation induced by the IDO1 inhibitor. These findings highlight a relevant role of USP14 in post-translational regulation of IDO1 and in the suppression of antitumor immunity, suggesting that inhibition of USP14 may represent a promising strategy for CRC immunotherapy.
Publisher: The Optical Society
Date: 10-02-2017
DOI: 10.1364/BOE.8.001488
Publisher: Elsevier BV
Date: 11-2020
Publisher: Wiley
Date: 28-10-2014
DOI: 10.1002/POLA.26974
Publisher: American Chemical Society (ACS)
Date: 19-07-2019
DOI: 10.1021/ACSSENSORS.9B01057
Abstract: Multiplexed analysis of biochemical analytes such as proteins, enzymes, and immune products using a microfluidic device has the potential to cut assay time, reduce s le volume, realize high-throughput, and decrease experimental error without compromising sensitivity. Despite these huge benefits, the need for expensive specialized equipment and the complex photolithography fabrication process for the multiplexed devices have, to date, prevented widespread adoption of microfluidic systems. Here, we present a simple method to fabricate a new microfluidic-based multiplexed biosensing device by taking advantage of 3D-printing. The device is an integration of normally closed (NC) microfluidic valving units which offer superior operational flexibility by using PDMS membrane (
Publisher: Springer Science and Business Media LLC
Date: 03-06-2008
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C5AY01324K
Abstract: This paper reports an electrochemical sensor based on the covalent anchoring of aryldiazonium salt modified AuNPs to gold electrodes for the sensitive detection of cadmium ions (Cd 2+ ).
Publisher: Informa UK Limited
Date: 1990
Publisher: American Chemical Society (ACS)
Date: 20-11-2017
Abstract: Graphene oxide (GO), with its exceptional physical and chemical properties and biocompatibility, holds a tremendous potential for sensing applications. In this study, GO, acting both as the electron-transfer bridge and the signal reporter, was attached on the interface to develop a label-free electrochemical nanosandwich device for detection of interleukin-6 (IL-6). First, a single layer of GO was covalently modified on gold electrodes, followed by attachment of anti-IL-6 capture antibody to form the sensing interface. The 4-aminophenyl phosphorylcholine was further attached to the surface of GO to minimize nonspecific protein adsorption. For reporting the presence of analyte, the anti-IL-6 detection antibody was covalently modified to the GO, which has been integrated with the redox probe Nile blue (NB). Finally, a nanosandwich assay was fabricated on gold surfaces for detection of IL-6 on the basis of the electrochemical signal of NB. The prepared nanosandwiches demonstrated high selectivity and stability for detection of IL-6 over the range of 1-300 pg mL
Publisher: AIP Publishing
Date: 03-2017
DOI: 10.1063/1.4981014
Abstract: We present an improvement to deterministic lateral displacement arrays, which allows higher particle concentration enhancement. We correct and extend previous equations to a mirror-symmetric boundary. This approach allows particles to be concentrated into a central channel, no wider than the surrounding gaps, thereby maximizing the particle enrichment. The resulting flow patterns were, for the first time, experimentally measured. The performance of the device with hard micro-spheres and cells was investigated. The observed flow patterns show important differences from our model and from an ideal pattern. The 18 μm gap device showed 11-fold enrichment of 7 μm particles and nearly perfect enrichment—of more than 50-fold—for 10 μm particles and Jurkat cells. This work shows a clear path to achieve higher-than-ever particle concentration enhancement in a deterministic microfluidic separation system.
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C9AN01300H
Abstract: A sandwich immunosensor was successfully developed for monitoring of interleukin-1β (IL-1β) in rat whole blood.
Publisher: Future Medicine Ltd
Date: 05-2019
Abstract: Aim: We demonstrated a novel theranostic system for simultaneous photothermal therapy and magnetic resonance imaging applicable to early diagnostics and treatment of cancer cells. Materials & methods: Oleic acid-Fe 3 O 4 and triphenylamine- inylanthracene-dicyano were loaded to the poly(L-lactic-co-glycolic acid) nanoparticles (NPs) on which anti-VEGF antibodies were modified to form anti-VEGF/OA-Fe 3 O 4 /triphenylamine- inylanthracene-dicyano@poly(L-lactic-co-glycolic acid) NPs. The 1H nuclear magnetic resonance (NMR), mass spectra, fluorescence, UV absorption, dynamic light scattering, transmission electron microscope and inductively coupled plasma mass spectrometry tests were used to characterize the NPs, and the bioimaging was illustrated by confocal laser scanning microscope (CLSM) and in vivo MRI animal experiment. Results: This system was capable to recognize the overexpressed VEGF-A as low as 68 pg/ml in different cell lines with good selectivity and photothermal therapy effect. Conclusion: These ultrasensitive theranostic NPs were able to identify tumor cells by fluorescence imaging and MRI, and destroy tumors under near infrared illumination.
Publisher: American Chemical Society (ACS)
Date: 09-04-2012
DOI: 10.1021/AC202754P
Abstract: A glassy carbon substrate was covalently modified with a mixed layer of 4-aminophenyl and phenyl via in situ electrografting of their aryldiazonium salts in acidic solutions. Single-walled carbon nanotubes (SWNTs) were covalently and vertically anchored on the electrode surface via the formation of amide bonds from the reaction between the amines located on the modified substrate and the carboxylic groups at the ends of the nanotubes. Ferrocenedimethylamine (FDMA) was subsequently attached to the ends of SWNTs through amide bonding followed by the attachment of an epitope, i.e., endosulfan hapten to which an antibody would bind. Association or dissociation of the antibody with the sensing interface causes a modulation of the ferrocene electrochemistry. Antibody-complexed electrodes were exposed to s les containing spiked endosulfan (unbound target analyte) in environment water and interrogated using the square wave voltammetry (SWV) technique. The modified sensing surfaces were characterized by atomic force microscopy, XPS, and electrochemistry. The fabricated electrochemical immunosensor can be successfully used for the detection of endosulfan over the range of 0.01-20 ppb by a displacement assay. The lowest detection limit of this immunosensor is 0.01 ppb endosulfan in 50 mM phosphate buffer at pH 7.0.
Publisher: Elsevier BV
Date: 10-2018
Publisher: American Chemical Society (ACS)
Date: 24-07-2023
Publisher: MDPI AG
Date: 16-01-2019
DOI: 10.3390/NANO9010104
Abstract: In order to satisfy the need for sensitive detection of Aflatoxin M1 (AFM1), we constructed a simple and signal-on fluorescence aptasensor based on an autocatalytic Exonuclease III (Exo III)-assisted signal lification strategy. In this sensor, the DNA hybridization on magnetic nanobeads could be triggered by the target AFM1, resulting in the release of a single-stranded DNA to induce an Exo III-assisted signal lification, in which numerous G-quadruplex structures would be produced and then associated with the fluorescent dye to generate significantly lified fluorescence signals resulting in the increased sensitivity. Under the optimized conditions, this aptasensor was able to detect AFM1 with a practical detection limit of 9.73 ng kg−1 in milk s les. Furthermore, the prepared sensor was successfully used for detection of AFM1 in the commercially available milk s les with the recovery percentages ranging from 80.13% to 108.67%. Also, the sensor performance was evaluated by the commercial immunoassay kit with satisfactory results.
Publisher: Elsevier BV
Date: 02-2014
DOI: 10.1016/J.BIOS.2013.09.009
Abstract: A novel multianalyte electrochemical immunosensor based on the assembly of patterned SWNTs on glassy carbon (GC) substrates was developed for simultaneous detection of endosulfan and paraoxon. Based on aryldiazonium salt chemistry, forest of SWNTs can be patterned on GC substrates by C3C bonding using micro contact printing (MCP), which provides an interface showing efficient electron transfer between biomolecules and electrodes. Then redox molecules FDMA and PQQ can be attached to the SWNTs, respectively followed by the attachment of specific epitopes and antibodies. The modified sensing surfaces were characterized by XPS, SEM, AFM and electrochemistry. Based on the current change of specific redox probes, the fabricated immunosensor array can be used for simultaneous detection of endosulfan and paraoxon by a displacement assay. In phosphate buffer solution (50mM, pH 7.0), there is a linear relationship between electrochemical signal of FDMA and the concentration of endosulfan over the range of 0.05-100 ppb with a detection limit of 0.05ppb the linear range between electrochemical signal of PQQ and the concentration of paraoxon is 2-2500 ppb with a detection limit of 2 ppb. The immunosensor array demonstrates high repeatability, reproducibility, stability and selectivity for the detection of endosulfan and paraoxon.
Publisher: MDPI AG
Date: 25-11-2021
DOI: 10.3390/BIOS11120474
Abstract: Over the past decades, paper-based lateral flow immunoassays (LFIAs) have been extensively developed for rapid, facile, and low-cost detection of a wide array of target analytes in a point-of-care manner. Conventional home pregnancy tests are the most significant ex le of LFAs, which detect elevated concentrations of human chorionic gonadotrophin (hCG) in body fluids to identify early pregnancy. In this work, we have upgraded these platforms to a higher version by developing a customized microfluidic paper-based analytical device (μPAD), as the new generation of paper-based point-of-care platforms, for colorimetric immunosensing. This will offer a cost-efficient and environmentally friendly alternative platform for paper-based immunosensing, eliminating the need for nitrocellulose (NC) membrane as the substrate material. The performance of the developed platform is demonstrated by detection of hCG (as a model case) in urine s les and subsequently indicating positive or negative pregnancy. A dual-functional silane-based composite was used to treat filter paper in order to enhance the colorimetric signal intensity in the detection zones of μPADs. In addition, microfluidic pathways were designed in a manner to provide the desired regulated fluid flow, generating sufficient incubation time (delays) at the designated detection zones, and consequently enhancing the obtained signal intensity. The presented approaches allow to overcome the existing limitations of μPADs in immunosensing and will broaden their applicability to a wider range of assays. Although, the application of the developed hCG μPAD assay is mainly in qualitative (i.e., positive or negative) detection of pregnancy, the semi-quantitative measurement of hCG was also investigated, indicating the viability of this assay for sensitive detection of the target hCG analyte within the related physiological range (i.e., 10–500 ng/mL) with a LOD value down to 10 ng/mL.
Publisher: Elsevier BV
Date: 06-2014
DOI: 10.1016/J.TALANTA.2014.02.034
Abstract: A novel coumarin-based fluorescent probe L ((4E)-4-((7-hydroxy-4-methyl-2-oxo-2H-chromen-8-yl) methyleneamino)-1,2-dihyydro-2,3-dimethyl-1-phenylpyrazol-5-one) has been developed as a simple and efficient chemosensor which exhibits a significant fluorescence reduction in the presence of metal cations. This sensor exhibits high selectivity and sensitivity toward Cu(2+) over other common cations. The mechanism for detecting copper was evaluated by time-dependent density functional theory (TD-DFT) calculations and the coordination mode was also confirmed by density functional theory (DFT) calculations. Furthermore, results of cell imaging in this study indicate that this new probe may be useful for detection and monitoring of Cu(2+) in biological applications.
Publisher: Springer Science and Business Media LLC
Date: 15-02-2018
DOI: 10.1038/S41598-018-21394-X
Abstract: Based on the structural features of fluometuron, an immunizing hapten was synthesized and conjugated to bovine serum albumin as an immunogen to prepare a polyclonal antibody. However, the resultant antibody indicated cross-reactivity with 6 structurally similar phenylurea herbicides, with binding activities (expressed by IC 50 values) ranging from 1.67 µg/L to 42.71 µg/L. All 6 phenylurea herbicides contain a common moiety and three different substitutes. To understand how these three different chemical groups affect the antibody-phenylurea recognition activity, quantum chemistry, using density function theory (DFT) at the B3LYP/6-311++ G(d,p) level of theory, was employed to optimize all phenylurea structures, followed by determination of the 3D conformations of these molecules, pharmacophore analysis, and molecular electrostatic potential (ESP) analysis. The molecular modeling results confirmed that the geometry configuration, pharmacophore features and electron distribution in the substituents were related to the antibody binding activity. Spearman correlation analysis further elucidated that the geometrical and electrostatic properties on the van der Waals (vdW) surface of the substituents played a critical role in the antibody-phenylurea recognition process.
Publisher: Wiley
Date: 05-04-2012
DOI: 10.1002/POLA.26067
Abstract: In this article, poly[poly(ethyleneglycol) acrylate] (polyPEG‐A) with mercaptothiazoline ester terminal group was synthesized directly by reversible addition fragmentation chain transfer (RAFT) polymerization using a mercaptothiazoline ester functional RAFT agent. The functional polyPEG‐A was then conjugated to glucose oxidase (GOx) via surface‐tethered amino groups through covalent amide coupling. Sorensenformaltitration assay revealed that GOx retained ∼14 free amino groups available for covalent modification. The conjugation reaction turned out to be efficient and mild. Colorimetric method was applied to evaluate the enzymatic activity of native GOx and its derivatives by introducing another enzyme, horseradish peroxidase. The modified GOx with polymeric chains exhibited reduced enzymatic activity toward the catalytical oxidation of glucose, but with significantly increased thermal stability and elongated lifetime. When GOx was modified with polyPEG‐A [molecular weight (MW), 45,000 polydispersity index, 1.12] the enzymatic activity was decreased to 37 U/mg, only 29% left. However, when incubated at 25 °C the modified GOx still retained 9.6% of its original bioactivity after 60 days, whereas the native GOx only lived for 29 days. The more polymer chains or the longer polymer chain attached, the more reduction of the enzymatic activity resulted, however, the longer the lifetime of the enzyme obtained. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012
Publisher: American Chemical Society (ACS)
Date: 16-11-2021
Abstract: Liquid metals (LMs) are electronic liquid with enigmatic interfacial chemistry and physics. These features make them promising materials for driving chemical reactions on their surfaces for designing nanoarchitectonic systems. Herein, we showed the interfacial interaction between eutectic gallium-indium (EGaIn) liquid metal and graphene oxide (GO) for the reduction of both substrate-based and free-standing GO. NanoIR surface mapping indicated the successful removal of carbonyl groups. Based on the gained knowledge, a composite consisting of assembled reduced GO sheets on LM microdroplets (LM-rGO) was developed. The LM enforced Ga
Publisher: Royal Society of Chemistry (RSC)
Date: 2008
DOI: 10.1039/B805668D
Abstract: Herein we present a label-free immunobiosensor based on the modulation of erometric signals of surface bound redox species when immersed in a protein environment which is applicable to either the detection of antibodies or the detection of small molecules such as drugs or pesticides.
Publisher: Springer Science and Business Media LLC
Date: 26-08-2019
DOI: 10.1038/S41378-019-0074-1
Abstract: Cytokines are cell signaling molecules that indicate the health status of the body. In this study, we developed a microfluidic device integrated with structure-switching aptamers capable of continuously tracking the concentration of the cytokine interferon gamma (IFN-γ) in cell culture medium and blood serum. First, a ferrocene (Fc)-labeled structure-switching signaling aptamer with a hairpin structure targeting IFN-γ was immobilized on magnetic nanobeads by the strongest noncovalent interactions between streptavidin and biotin. The aptamer-modified magnetic nanobeads were trapped on a customized microfluidic chip by a magnetic field to form the sensing interface. The binding of IFN-γ could trigger the hairpin structure of the aptamer to unfold, pushing Fc redox molecules away from the sensing interface and consequently switching off the electrochemical signal. The change in the redox current of Fc was quantitatively related to the concentration of IFN-γ in a linear range of 10–500 pg mL −1 and with the lowest detection limit of 6 pg mL −1 . This microfluidic device was specific to IFN- γ in the presence of overabundant serum proteins and allowed the continuous monitoring of IFN-γ without adding exogenous reagents. It provided a universal point-of-care biosensing platform for the real-time detection of a spectrum of analytes.
Publisher: Elsevier BV
Date: 07-2018
DOI: 10.1016/J.BBI.2018.04.011
Abstract: Mounting evidence indicates that cytokines secreted by innate immune cells in the brain play a central role in regulating neural circuits that subserve mood, cognition, and sickness responses. A major impediment to the study of neuroimmune signaling in healthy and disease states is the absence of tools for in vivo detection of cytokine release in the brain. Here we describe the design and application of a cytokine detection device capable of serial monitoring of local cytokine release in discrete brain regions. The immunocapture device consisted of a modified optical fiber labeled with a capture antibody specific for the pro-inflammatory cytokine interleukin-1 beta (IL-1β). Using a sandwich immunoassay method, in vitro data demonstrate that the sensing interface of the modified optical fiber has a linear detection range of 3.9 pg mL
Publisher: Wiley
Date: 09-01-2020
Publisher: American Chemical Society (ACS)
Date: 29-12-2017
DOI: 10.1021/ACSSENSORS.6B00619
Abstract: We demonstrated a cytokine detection device based on gold nanoparticle modified silica optical fiber for the monitoring of locally variable cytokine interleukin-6 (IL-6) concentrations using a sandwich immunoassay scheme. The fiber is designed to be introduced into an intrathecal catheter with micrometer-sized holes drilled along its length to enable fluid exchange between the outside and inside of the catheter. An exposed optical fiber (diameter 125 μm) modified with a layer of gold nanoparticles was functionalized with the IL-6 capture antibody to form the sensing interface. The immunocapture device was incubated with a cytokine solution to capture the analyte. The device was then exposed to the IL-6 detection antibody which was loaded on the fluorescently labeled magnetic nanoparticles, making it possible to quantify the cytokine concentration based on the intensity of fluorescence. A reliable method for quantifying the fluorescent signal on a 3D structure was developed. This device was applied to the detection of cytokine IL-6 with the low limit of detection of 1 pg mL
Publisher: Elsevier BV
Date: 08-2019
Publisher: Springer Nature Switzerland
Date: 2022
Publisher: Elsevier BV
Date: 03-2014
DOI: 10.1016/J.BIOS.2013.10.025
Abstract: A biosensor based on AuNP modified GC electrodes has been developed for direct detection of methyl parathion. AuNP can be introduced to mixed monolayers of aryldiazonium salt modified GC electrodes by Au-C bonding through aryldiazonium salt chemistry, which provides a stable interface showing efficient electron transfer between biomolecules and electrodes. PEG molecules were introduced to the interface to resist non-specific protein adsorption. AuNP surfaces were further modified with 4-carboxyphenyl followed by covalent immobilization of methyl parathion hydrolase (MPH), a specific biocatalytic enzyme to methyl parathion. Exposure of this interface to methyl parathion resulted in a change in erometric signal due to the MPH catalytic hydrolysis of methyl parathion producing electroactive compound 4-nitrophenol. This biosensor shows high selectivity, specificity, reproducibility and stability, and is functional for the detection of methyl parathion in real s les. The linear range for detection of methyl parathion is 0.2-100 ppb with a detection limit of 0.07 ppb in 0.1M phosphate buffer at pH 7.0.
Publisher: AIP Publishing
Date: 30-10-2017
DOI: 10.1063/1.4995657
Abstract: We have developed a microfluidic needle-like device that can extract and deliver nanoliter s les. The device consists of a T-junction to form segmented flows, parallel channels to and from the needle tip, and seven hydrophilic capillaries at the tip that form a phase-extraction region. The main microchannel is hydrophobic and carries segmented flows of water-in-oil. The hydrophilic capillaries transport the aqueous phase with a nearly zero pressure gradient but require a pressure gradient of 19 kPa for mineral oil to invade and flow through. Using this device, we demonstrate the delivery of nanoliter droplets and demonstrate s ling through the formation of droplets at the tip of our device. During s ling, we recorded the fluorescence intensities of the droplets formed at the tip while varying the concentration of dye outside the tip. We measured a chemical signal response time of approximately 3 s. The linear relationship between the recorded fluorescence intensity of s les and the external dye concentration (10–40 μg/ml) indicates that this device is capable of performing quantitative, real-time measurements of rapidly varying chemical signals.
Publisher: Royal Society of Chemistry (RSC)
Date: 2023
DOI: 10.1039/D3LC00038A
Abstract: Advanced printable biosensors: paper as ex le.
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C9ME00047J
Abstract: IFN-γ-induced fluorescence aptasensing strategies through hybridization chain reaction lification and signal-on 3D optical fiber sensing interface.
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 15-06-2022
Publisher: Wiley
Date: 07-06-2011
Publisher: American Chemical Society (ACS)
Date: 15-05-2019
DOI: 10.1021/ACS.ANALCHEM.9B01777
Abstract: It is highly desirable to realize real-time monitoring of the drug delivery/release process in cancer treatment. Herein, a monitorable mitochondria-specific DNAtrain (MitoDNAtrs) was developed for image-guided drug delivery and synergistic cancer therapy. In this system, mitochondria-targeting Cy5.5 dye served as the "locomotive" to guide the DNA "vehicle" selectively accumulating in the cancer cells in a detectable manner. More importantly, Cy5.5 showed reactive oxygen species (ROS) generation ability, which made it a promising adjuvant chemotherapy lifier for cancer theranostics.
Publisher: Elsevier BV
Date: 08-2013
Publisher: Elsevier BV
Date: 07-2020
Publisher: Wiley
Date: 06-06-2012
Publisher: Elsevier BV
Date: 2020
Publisher: MDPI AG
Date: 21-04-2020
DOI: 10.3390/BIOS10040042
Abstract: Changing lifestyle and food habits are responsible for health problems, especially those related to bone in an aging population. Poor bone health has now become a serious matter of concern for many of us. In order to avoid serious consequences, the early prediction of symptoms and diagnosis of bone diseases have become the need of the hour. From this inspiration, the evolution of different bone health monitoring techniques and measurement methods practiced by researchers and healthcare companies has been discussed. This paper focuses on various types of bone diseases along with the modeling and remodeling phenomena of bones. The evolution of various diagnosis tests for bone health monitoring has been also discussed. Various types of bone turnover markers, their assessment techniques, and recent developments for the monitoring of biochemical markers to diagnose the bone conditions are highlighted. Then, the paper focuses on the potential assessment of the recent sensing techniques (physical sensors and biosensors) that are currently available for bone health monitoring. Considering the importance of electrochemical biosensors in terms of high sensitivity and reliability, specific attention has been given to the recent development of electrochemical biosensors and significance in real-time monitoring of bone health.
Publisher: Elsevier BV
Date: 02-2007
Publisher: Elsevier BV
Date: 2020
Publisher: American Association for Cancer Research (AACR)
Date: 31-03-2023
DOI: 10.1158/0008-5472.22432604.V1
Abstract: Supplementary Data from MEX3C-Mediated Decay of SOCS3 mRNA Promotes JAK2/STAT3 Signaling to Facilitate Metastasis in Hepatocellular Carcinoma
Publisher: Wiley
Date: 20-04-2010
Publisher: American Chemical Society (ACS)
Date: 19-07-2021
Publisher: Wiley
Date: 04-05-2021
DOI: 10.1002/VIW.20210003
Abstract: Cytokines are signaling molecules between cells in immune system. Cytokine storm, due to the sudden acute increase in levels of pro‐inflammatory circulating cytokines, can result in disease severity and major‐organ damage. Thus, there is urgent need to develop rapid, sensitive, and specific methods for monitoring of cytokines in biology and medicine. Undoubtedly, point‐of‐care testing (POCT) will provide clinical significance in disease early diagnosis, management, and prevention. This review aims to summarize and discuss the latest technologies for detection of cytokines with a focus on POCT. The overview of diseases resulting from imbalanced cytokine levels, such as COVID‐19, sepsis and other cytokine release syndromes are presented. The clinical cut‐off levels of cytokine as biomarkers for different diseases are summarized. The challenges and perspectives on the development of cytokine POCT devices are also proposed and discussed. Cytokine POCT devices are expected to be the ongoing spotlight of disease management and prevention during COVID‐19 pandemic and also the post COVID‐19 pandemic era.
Publisher: Wiley
Date: 26-09-2011
Publisher: Wiley
Date: 16-11-2020
DOI: 10.1002/MDS3.10133
Publisher: Elsevier BV
Date: 05-2022
DOI: 10.1016/J.BIOS.2022.114029
Abstract: Insulin is an essential and versatile hormone taking part in the control of blood glucose levels and protein anabolism. Abnormal levels of circulating insulin in the body can be problematic. Insulin resistance means the body fails to react with high or normal level insulin, causing our body to produce more insulin through feedback, and is the main cause of many chronic diseases such as type 2 diabetes and obesity. Pre-diabetes or obesity often occurs in people with high insulin resistance. Thus, quantification of insulin levels is essential for the early diagnosis and treatment of diabetes mellitus and obesity. Immunoassays and chromatography assays are currently reliable methods for insulin detection, although they are time-consuming, expensive, and require complex procedures, centralized instruments as well as trained personnel. Modern biosensing technologies have demonstrated success and huge potential for the quantification of insulin. This review provides a summary of the biological significance of insulin with a focus on the role of insulin resistance and its consequences in pre-diabetes/diabetes and obesity. The current practice for insulin detection followed by recent advances in developing biosensors for detection of insulin are reviewed, compared, and discussed from the aspects of detection principle, analytical performances, and challenges. Finally, future perspectives in the quantification of insulin in clinical settings are proposed.
Publisher: American Chemical Society (ACS)
Date: 18-04-2019
Abstract: Semiconducting polymer (SP) nanoparticles (NPs) have recently emerged as one of the most promising agents for photoacoustic imaging (PAI)-guided photothermal hotodynamic therapy (PTT/PDT). Herein, a triplet tellurophene-based SP (PNDI-2T) was synthesized with efficient tin-free direct heteroarylation polycondensation. The PNDI-2T NPs display remarkable near-infrared absorption and low cytotoxicity. In addition, PNDI-2T NPs can generate abundant reactive oxygen species (ROS) since tellurophene facilitates the intersystem crossing to generate triplet excited states. Remarkably, PNDI-2T NPs present a high photothermal conversion efficiency (η = 45%) and a high ROS yield (ΦΔ = 38.7%) under 808 nm laser irradiation. Furthermore, we showed that PNDI-2T NPs could be excellent PAI-guided PTT/PDT agents for cancer theranostics. This study provides a new route to developing highly efficient and low cytotoxic agents for PAI-guided PTT/PDT.
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C6NR09381G
Abstract: The detection of cytokines in body fluids, cells, tissues and organisms continues to attract considerable attention due to the importance of these key cell signalling molecules in biology and medicine. We report a graphene quantum dot (GQD) based aptasensor able to specifically detect ultra-small amounts of cytokine molecules intracellularly. Graphene quantum dots modified with cytokine aptamers (Ap-GQDs) and epitope modified GQDs (Ep-GQDs) were prepared both are normally fluorescent at sufficient dilution. However, the fluorescence of the conjugates of Ap-GQDs and Ep-GQDs is quenched due to aggregation between Ap-GQDs and Ep-GQDs. After incubation of the cytokine-secreting cells with the conjugates of Ap-GQDs and Ep-GQDs, the cytokines secreted in cells compete for binding with the epitope which is then displaced. The ensuing binding of cytokines with the aptamers results in the disaggregation of Ap-GQDs and Ep-GQDs, and the recovery of fluorescence. The conjugates of Ap-GQDs and Ep-GQDs were used as nanosensors for monitoring intracellular cytokine IFN-γ secretion with very high sensitivity (2 pg mL
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C9AY01102A
Abstract: Displacement of an antibody enhanced by negative electro-pulsion.
Publisher: American Chemical Society (ACS)
Date: 11-2016
Publisher: American Association for Cancer Research (AACR)
Date: 31-03-2023
DOI: 10.1158/0008-5472.C.6514187.V1
Abstract: Abstract Tumor metastasis is one of the major causes of high mortality in patients with hepatocellular carcinoma (HCC). Sustained activation of STAT3 signaling plays a critical role in HCC metastasis. RNA binding protein (RBP)–mediated posttranscriptional regulation is involved in the precise control of signal transduction, including STAT3 signaling. In this study, we investigated whether RBPs are important regulators of HCC metastasis. The RBP MEX3C was found to be significantly upregulated in highly metastatic HCC and correlated with poor prognosis in HCC. Mechanistically, MEX3C increased JAK2/STAT3 pathway activity by downregulating SOCS3, a major negative regulator of JAK2/STAT3 signaling. MEX3C interacted with the 3′UTR of SOCS3 and recruited CNOT7 to ubiquitinate and accelerate decay of SOCS3 mRNA. Treatment with MEX3C-specific antisense oligonucleotide significantly inhibited JAK2/STAT3 pathway activation, suppressing HCC migration i in vitro /i and metastasis i in vivo /i . These findings highlight a novel mRNA decay-mediated mechanism for the disruption of SOCS3-driven negative regulation of JAK2/STAT3 signaling, suggesting MEX3C may be a potential prognostic biomarker and promising therapeutic target in HCC. Significance: This study reveals that RNA-binding protein MEX3C induces SOCS3 mRNA decay to promote JAK2/STAT3 activation and tumor metastasis in hepatocellular carcinoma, identifying MEX3C targeting as a potential approach for treating metastatic disease. /
Publisher: Institution of Engineering and Technology
Date: 2017
DOI: 10.1049/CP.2017.0077
Publisher: Wiley
Date: 26-04-2013
Publisher: Elsevier BV
Date: 10-2019
Publisher: The Optical Society
Date: 30-11-2015
DOI: 10.1364/OE.24.000A85
Publisher: Elsevier BV
Date: 04-2011
Location: Australia
Location: No location found
Start Date: 06-2017
End Date: 02-2021
Amount: $652,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 08-2022
End Date: 07-2027
Amount: $5,000,000.00
Funder: Australian Research Council
View Funded Activity