ORCID Profile
0000-0001-7965-2914
Current Organisations
Shenzhen Institutes of Advanced Technology
,
Swinburne University of Technology
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
In Research Link Australia (RLA), "Research Topics" refer to ANZSRC FOR and SEO codes. These topics are either sourced from ANZSRC FOR and SEO codes listed in researchers' related grants or generated by a large language model (LLM) based on their publications.
Nanomanufacturing | Interdisciplinary Engineering | Biomaterials | Interdisciplinary Engineering not elsewhere classified | Regenerative Medicine (incl. Stem Cells and Tissue Engineering) | Nanotechnology
Expanding Knowledge in Technology | Expanding Knowledge in the Physical Sciences | Expanding Knowledge in the Biological Sciences |
Publisher: American Vacuum Society
Date: 12-2015
DOI: 10.1116/1.4936071
Abstract: Biofilm formation on medical implants and subsequent infections are a global problem. A great deal of effort has focused on developing chemical contrasts based on micro- and nanopatterning for studying and controlling cells and bacteria at surfaces. It has been known that micro- and nanopatterns on surfaces can influence biomolecule adsorption, and subsequent cell and bacterial adhesion. However, less focus has been on precisely controlling patterns to study the initial bacterial attachment mechanisms and subsequently how the patterning influences the role played by biomolecular adsorption on biofilm formation. In this work, the authors have used colloidal self-assembly in a confined area to pattern surfaces with colloidal crystals and used them as masks during allylamine plasma polymer (AAMpp) deposition to generate highly ordered patterns from the micro- to the nanoscale. Polyethylene glycol (PEG)-aldehyde was grafted to the plasma regions via “cloud point” grafting to prevent the attachment of bacteria on the plasma patterned surface regions, thereby controlling the adhesive sites by choice of the colloidal crystal morphology. Pseudomonas aeruginosa was chosen to study the bacterial interactions with these chemically patterned surfaces. Scanning electron microscope, x-ray photoelectron spectroscopy (XPS), atomic force microscopy, and epifluorescence microscopy were used for pattern characterization, surface chemical analysis, and imaging of attached bacteria. The AAMpp influenced bacterial attachment because of the amine groups displaying a positive charge. XPS results confirm the successful grafting of PEG on the AAMpp surfaces. The results showed that PEG patterns can be used as a surface for bacterial patterning including investigating the role of biomolecular patterning on bacterial attachment. These types of patterns are easy to fabricate and could be useful in further applications in biomedical research.
Publisher: Elsevier BV
Date: 2015
DOI: 10.1016/J.ACTBIO.2014.09.027
Abstract: It is well known that the surface chemistry of biomaterials is important for both initial cell attachment and the downstream cell response. Surface chemistry gradients are a new format that allows the screening of the subtleties of cell-surface interactions in high throughput. In this study, two surface chemical gradients were fabricated using diffusion control during plasma polymerization via a tilted mask. Acrylic acid (AA) plasma polymer gradients were coated on a uniform 1,7-octadiene (OD) plasma polymer layer to generate OD-AA plasma polymer gradients, whilst diethylene glycol dimethyl ether (DG) plasma polymer gradients were coated on a uniform AA plasma polymer layer to generate AA-DG plasma polymer gradients. Gradient surfaces were characterized by X-ray photoelectron spectroscopy, infrared microscopy mapping, profilometry, water contact angle (WCA) goniometry and atomic force microscopy. Cell attachment density and differentiation into osteo- and adipo-lineages of rat-bone-marrow mesenchymal stem cells (rBMSCs) was studied on gradients. Cell adhesion after 24 h culture was sensitive to the chemical gradients, resulting in a cell density gradient along the substrate. The slope of the cell density gradient changed between 24 and 6 days due to cell migration and growth. Induction of rBMSCs into osteoblast- and adipocyte-like cells on the two plasma polymer gradients suggested that osteogenic differentiation was sensitive to local cell density, but adipogenic differentiation was not. Using mixed induction medium (50% osteogenic and 50% adipogenic medium), thick AA plasma polymer coating (>40 nm thickness with ∼11% COOH component and 35° WCA) robustly supported osteogenic differentiation as determined by colony formation and calcium deposition. This study establishes a simple but powerful approach to the formation of plasma polymer based gradients, and demonstrates that MSC behavior can be influenced by small changes in surface chemistry.
Publisher: Cold Spring Harbor Laboratory
Date: 29-01-2021
DOI: 10.1101/2021.01.29.428701
Abstract: Retinal neovascularization, or pathological angiogenesis in the retina, is a leading cause of blindness in developed countries. Transforming growth factor-β-activated kinase 1 (TAK1) is a mitogen-activated protein kinase kinase kinase (MAPKKK) activated by TGF-β1 and other pro-inflammatory cytokines. TAK1 is also a key mediator of inflammation, innate immune responses, apoptosis and tissue homeostasis and plays an important role in physiological angiogenesis. Its role in pathological angiogenesis, particularly in retinal neovascularization, remains unclear. We investigated the regulatory role of TAK1 in pathological angiogenesis in the retina. Transcriptome analysis of human retina featuring retinal neovascularization revealed enrichment of known TAK1-mediated signaling pathways. Selective inhibition of TAK1 activation by 5Z-7-oxozeaenol attenuated aberrant retinal angiogenesis in rats following oxygen-induced retinopathy. Transcriptome profiling revealed that TAK1 activation in human microvascular endothelial cells under TNFα stimulation led to increase the gene expression related to cytokines and leukocyte-endothelial interaction, mainly through nuclear factor kappa B (NFκB) signaling pathways. These results reveal that inhibition of TAK1 signaling may have therapeutic value for the treatment of pathological angiogenesis in the retina.
Publisher: MDPI AG
Date: 25-02-2022
Abstract: Surface coatings are critical in biomaterials and biomedical devices. Chemical vapor deposition (CVD) is a well-known technology for the generation of thin films on a surface. However, the granular structures produced using CVD are rare. Recently, we used PPX-C, an excellent insulating material, for granular structure coating using CVD. Colloidal self-assembly is also a well-established method to generate granular structures named colloidal self-assembled patterns (cSAPs). In this study, we combined these two technologies to generate hierarchical granular structures and tested the biophysical effect of these hybrid surfaces on human bone marrow mesenchymal stem cells (hBMSCs). Two CVD-derived granular structures were made using water or glycerin droplets (i.e., CVD or GlyCVD surfaces). Water drops generate porous particles, while glycerin drops generate core–shell particles on the surface. These particles were dispersed randomly on the surface with sizes ranging from 1 to 20 μm. These CVD surfaces were hydrophobic (WCA ~ 80–110 degrees). On the other hand, a binary colloidal crystal (BCC), one type of cSAPs, composed of 5 μm Si and 400 nm carboxylated polystyrene (PSC) particles, had a close-packed structure and a hydrophilic surface (WCA ~ 45 degrees). The hybrid surfaces (i.e., CVD-BCC and GlyCVD-BCC) were smooth (Ra ~ 1.1–1.5 μm) and hydrophilic (WCA ~ 50 degrees), indicating a large surface coverage of BCC dominating the surface property. The hybrid surfaces were expected to be slightly negatively charged due to naturally charged CVD particles and negatively charged BCC particles. Cell adhesion was reduced on the hybrid surfaces, leading to an aggregated cell morphology, without reducing cell activity, compared to the flat control after 5 days. qPCR analysis showed that gene expression of type II collagen (COL2) was highly expressed on the GlyCVD-BCC without chemical induction after 3 and 14 days compared to the flat control. This proof-of-concept study demonstrates the potential of combining two technologies to make hybrid structures that can modulate stem cell attachment and differentiation.
Publisher: Wiley
Date: 22-08-2023
Abstract: Non‐small cell lung cancer (NSCLC) is the most common pathological type of lung cancer , accounting for approximately 85% of lung cancers. For more than 40 years, platinum (Pt)‐based drugs are still one of the most widely used anticancer drugs even in the era of precision medicine and immunotherapy. However, the clinical limitations of Pt‐based drugs, such as serious side effects and drug resistance, have not been well solved. This study constructs a new albumin‐encapsulated Pt(IV) nanodrug (HSA@Pt(IV)) based on the Pt(IV) drug and nanodelivery system. The characterization of nanodrug and biological experiments demonstrate its excellent drug delivery and antitumor effects. The multi‐omics analysis of the transcriptome and the ionome reveals that nanodrug can activate ferroptosis by affecting intracellular iron homeostasis in NSCLC. This study provides experimental evidence to suggest the potential of HSA@Pt(IV) as a nanodrug with clinical application.
Publisher: Wiley
Date: 02-09-2016
DOI: 10.1002/BIT.26075
Abstract: In vitro manipulation of human stem cells is a critical process in regenerative medicine and cellular therapies. Strategies and methods to maintain stem cells and direct them into specific lineages are ongoing challenges in these fields. To date, a number of studies have reported that besides biochemical stimulation, biophysical cues in the form of surface patterning and external stimulation also influence stem cell attachment, proliferation, and differentiation, and can be used in cell reprogramming and the maintenance of pluripotency. While biochemical cues are generally effective and easy to deliver, biophysical cues have many other advantages for scalability as they are cost efficient, have a longer lifetime, and can be easily defined. However, different protocols and cell sources utilized in a variety of studies have led to difficulties in obtaining clear conclusions about the effects of the biophysical environment on stem cells. In addition, the examination of different types of external stimulation is time consuming and limited by available fabrication techniques, resulting in a delay in commercialization and clinical applications. In this review, we aim to summarize the most important biophysical cues and methods for the culture of human stem cells, including mesenchymal and pluripotent stem cells, to facilitate their adoption in stem cell biology. The standard classical protocols of using biochemical cues will also be discussed for comparison. We believe that combining biochemical and biophysical stimulation has the greatest potential to generate functionally mature cells at a scalable and inexpensive rate for erse applications in regenerative medicine and cell therapy. Biotechnol. Bioeng. 2017 : 260-280. © 2016 Wiley Periodicals, Inc.
Publisher: American Chemical Society (ACS)
Date: 09-01-2018
Abstract: The ability of bacteria to form biofilms and the emergence of antibiotic-resistant strains have prompted the need to develop the next generation of antibacterial coatings. Antimicrobial peptides (AMPs) are showing promise as molecules that can address these issues, especially if used when immobilized as a surface coating. We present a method that explores how surface patterns together with the selective immobilization of an AMP called PuroA (FPVTWRWWKWWKG-NH
Publisher: MDPI AG
Date: 06-04-2021
Abstract: The success of recent material science and applications in biotechnologies should be credited to developments of malleable surface properties, as well as the adaptation of conjugation reactions to the material surface [...]
Publisher: Springer Science and Business Media LLC
Date: 19-08-2012
DOI: 10.1007/S10856-012-4748-6
Abstract: Topographic cues have been recognized crucial on the modulation of cell behavior, and subsequent important for the design of implants, cell-based biomedical devices and tissue-engineered products. Grooved topography direct cells to align anisotropically on the substrates, resulting in an obvious morphological difference compared with the flat and the other topographies. This study aimed at investigating the effects of grooved topography on the differentiation of mesenchymal stem cells (MSCs) into osteoblasts, adipocytes and myoblasts. A series of submicron-grooved polystyrene substrates with equal groove-to-ridge ratio but different width and depth (width/depth (nm): 450/100, 450/350, 900/100, and 900/550) were fabricated based on electron beam lithography and soft lithography techniques. Primary rat MSCs (rMSCs) were cultured on these substrates without induction for differentiation for 6 days, and then subjected to induction for osteogenesis, adipogenesis and myogenesis. While the alignment of rMSCs strongly complied with the direction of the grooves and increased with groove depths, cell attachment on day 1 (~1.5 × 10(4)/cm(2)) and cell proliferation after 6 days of culture (~5 × 10(4)/cm(2)) were not significantly affected by substrate types. Osteogenesis, indicated by alkaline phosphatase activities and calcium deposit, was not significantly modulated by the grooved substrates, compared with the flat control, suggesting that cell alignment may not determine osteoinduction of rMSCs. On the other hand, adipogenesis, indicated by lipid production, was significantly enhanced by the grooved substrates compared with the flat surface (P < 0.001). On the other hand, myogenesis, indicated by desmin and MHC staining, was enhanced by the grooves in a time- and groove size-dependent manner compared with the flat control. The results suggested that grooved topography has an in-depth potential for modulating the commitment of the stem cell lineages, which could benefit the development of advanced biomaterials for biomedical applications.
Publisher: Wiley
Date: 22-02-2012
DOI: 10.1002/BIT.24452
Abstract: Both chemical and topographic cues are crucial for the development of skeletal muscle. In this study, the relative roles of both signals in regard to cell adhesion, morphology, and differentiation of C2C12 skeletal myoblasts were investigated. Grooved polystyrene substrates containing grooves with approximately 900 nm in width with 600 nm ridge spans and 665 nm in depth were conjugated with the cell adhesion peptide arginine-glycine-aspartic acid (RGD). RGD conjugation significantly enhanced the adhesion, growth and differentiation of C2C12 cells. On the other hand, anisotropic topography primarily directed the direction and alignment of myoblasts and myotubes. The results in this study provide information regarding the relative roles of chemical and topographic cues in musculoskeletal myogenesis, and are of interest to applications in muscle tissue engineering.
Publisher: American Chemical Society (ACS)
Date: 29-04-2021
Publisher: Wiley
Date: 02-01-2015
Publisher: Royal Society of Chemistry (RSC)
Date: 2012
DOI: 10.1039/C2RA00791F
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C4TB02006E
Abstract: Large-area highly ordered self-assembled binary colloidal crystal (BCC) monolayers are fabricated for mammalian cell culture and biointerface control.
Publisher: Wiley
Date: 10-08-2012
DOI: 10.1002/BIT.24615
Abstract: This study aimed to investigate the effects of submicron-grooved topography and surface cell affinity on the attachment, proliferation and collagen synthesis of anterior cruciate ligament (ACL) cells. Two grooved polystyrene (PS) surfaces (equal groove/ridge width of 800 nm) with a groove depth of 100 or 700 nm were fabricated and modified by oxygen plasma treatment, dopamine deposition and conjugation of RGD-containing peptides to enhance cell affinity. The elongation and alignment of ACL cells was enhanced by grooved structures with increasing groove depths regardless of surface chemistry. On the other hand, cell spreading and proliferation mainly depended on surface chemistry, in accordance with surface cell affinity: O(2) plasma < dopamine deposition < RGD conjugation. The synthesis of type I collagen was the highest by the ACL cells cultured on the 700 nm grooved surface conjugated with RGD peptides, indicating that both surface grooved topography and chemistry play a role in modulating collagen production of ACL cells. Furthermore, the type I collagen deposited on the 700 nm PS surface was aligned with grooves/ridges. Our results indicated that both ligand presentation and cell alignment are important in the physiological activities of ACL fibroblasts. Such information is critical for design of biomaterials for ACL tissue engineering.
Publisher: American Chemical Society (ACS)
Date: 30-12-2022
Publisher: American Chemical Society (ACS)
Date: 10-03-2020
Publisher: American Chemical Society (ACS)
Date: 09-02-2016
Abstract: A new surface based on self-assembly of two colloids into well-defined nanostructures, so-called binary colloidal crystals (BCCs), was fabricated for stem cell culture. The facile fabrication process are able to cover large surface areas (>3 cm-diameter, i.e. > 7 cm(2)) with ordered surface nanotopographies that is often a challenge particularly in biomaterials science. From our library, four different combinations of BCCs were selected using mixtures of silica, polystyrene and poly(methyl methacrylate) particles with sizes in the range from 100 nm to 5 μm. Cell spreading, proliferation, and surface-induced lineage commitment of human adipose-derived stem cells (hADSCs) was studied using quantitative real time polymerase chain reaction (qRT-PCR) and immunostaining. The results showed that BCCs induced osteo- and chondro- but not adipo-gene expression in the absence of induction medium suggesting that the osteochondral lineage can be stimulated by the BCCs. When applying induction media, higher osteo- and chondro-gene expression on BCCs was found compared with tissue culture polystyrene (TCPS) and flat silica (Si) controls, respectively. Colony forming of chondrogenic hADSCs was found on BCCs and TCPS but not Si controls, suggesting that the differentiation of stem cells is surface-dependent. BCCs provide access to complex nanotopographies and chemistries, which can find applications in cell culture and regenerative medicine.
Publisher: Royal Society of Chemistry (RSC)
Date: 2013
DOI: 10.1039/C3BM60026B
Publisher: Wiley
Date: 27-04-2009
DOI: 10.1002/JBM.B.31384
Abstract: It is well-documented that dynamical compression stimulates biosynthesis of extracellular biomacromolecules in cartilage explant or in chondrocyte/hydrogel systems. The object of this study was to apply high-strain dynamic compression to cell-seeded elastic scaffolds for articular cartilage tissue engineering. Rabbit chondrocytes had been cultured in chitosan/gelatin scaffolds for 3 days before dynamic compression. The chondrocyte/scaffold constructs were subjected to short-term (3 or 9 h) or long-term (6 h/day for 3 weeks) cyclic compression with 40% strain and 0.1 Hz. The expression of type II collagen and aggrecan was upregulated after 3-h of compression when compared with the free-swelling s les. Furthermore, long-term culture under dynamic compression facilitated cellular proliferation and deposition of glycosaminoglycan. Our results suggest that high-strain dynamic compression combined with elastic scaffolds might benefit articular cartilage tissue engineering.
Publisher: Elsevier BV
Date: 11-2016
DOI: 10.1016/J.ACTBIO.2016.08.054
Abstract: The ability to control the interactions of stem cells with synthetic surfaces is proving to be effective and essential for the quality of passaged stem cells and ultimately the success of regenerative medicine. The stem cell niche is crucial for stem cell self-renewal and differentiation. Thus, mimicking the stem cell niche, and here in particular the extracellular matrix (ECM), in vitro is an important goal for the expansion of stem cells and their applications. Here, surface nanotopographies and surface-immobilised biosignals have been identified as major factors that control stem cell responses. The development of tailored surfaces having an optimum nanotopography and displaying suitable biosignals is proposed to be essential for future stem cell culture, cell therapy and regenerative medicine applications. While early research in the field has been restricted by the limited availability of micro- and nanofabrication techniques, new approaches involving the use of advanced fabrication and surface immobilisation methods are starting to emerge. In addition, new cell types such as induced pluripotent stem cells (iPSCs) have become available in the last decade, but have not been fully understood. This review summarises significant advances in the area and focuses on the approaches that are aimed at controlling the behavior of human stem cells including maintenance of their self-renewal ability and improvement of their lineage commitment using nanotopographies and biosignals. More specifically, we discuss developments in biointerface science that are an important driving force for new biomedical materials and advances in bioengineering aiming at improving stem cell culture protocols and 3D scaffolds for clinical applications. Cellular responses revolve around the interplay between the surface properties of the cell culture substrate and the biomolecular composition of the cell culture medium. Determination of the precise role played by each factor, as well as the synergistic effects amongst the factors, all of which influence stem cell responses is essential for future developments. This review provides an overview of the current state-of-the-art in the design of complex material surfaces aimed at being the next generation of tools tailored for applications in cell culture and regenerative medicine. This review focuses on the effect of surface nanotopographies and surface-bound biosignals on human stem cells. Recently, stem cell research attracts much attention especially the induced pluripotent stem cells (iPSCs) and direct lineage reprogramming. The fast advance of stem cell research benefits disease treatment and cell therapy. On the other hand, surface property of cell adhered materials has been demonstrated very important for in vitro cell culture and regenerative medicine. Modulation of cell behavior using surfaces is costeffective and more defined. Thus, we summarise the recent progress of modulation of human stem cells using surface science. We believe that this review will capture a broad audience interested in topographical and chemical patterning aimed at understanding complex cellular responses to biomaterials.
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 05-2018
Publisher: Wiley
Date: 14-05-2021
Abstract: Rare cancer cells, such as circulating tumor cells (CTCs) and cancer stem cells (CSCs), are small cell population found in cancer patients. CTCs have been recognized as tumor avatars for real‐time cancer monitoring, while CSCs are the most malignant tumor cells that play a dominant role in drug resistance and metastasis. Interestingly, these two types of cells share the same surface markers, such as EpCAM, CD44, and CD133. While capturing these rare cells is available, the expansion of these cells is still challenging due to the limited cell number. These cells are susceptible to the microenvironment and lose the capability to grow in vitro, especially after an intense capturing process. A technology called patient‐derived tumor organoids (PDOs) or tumoroids is a rising start in cancer modeling but the applicability is still questionable. Recently, assembloids containing multiple tumor‐related cells have been developed which is one step closer to the real tumor. In this review, strategies for in vitro expansion of tumoroids are summarized implying that artificial tumor niche composed of optimized biophysical and biological cues is vital in the tumoroid generation. Tumoroids containing rare cancer cells is believed to be beneficial in the diagnosis, therapeutic regimen, and drug discovery for personalized therapy.
Publisher: American Chemical Society (ACS)
Date: 07-01-2019
Abstract: The development of human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) provides significant advances to cell therapy, disease modeling, and drug screening applications. However, the current differentiation protocol is inefficient in mimicking biophysical and biochemical characteristics of cardiac niche. Hence, immature cardiomyocytes are often generated. In this study, hiPSC-CMs were generated on a new family of substrates called monolayer binary colloidal crystals (BCCs). Four BCCs were fabricated with different sizes (2 or 5 or 0.4 or 0.2 μm) and materials [Si or polystyrene (PS) or poly(methyl methacrylate)] abbreviated as 2PS, 5PS, 2PM, and 5PM. BCCs have complex surface micro-/nanotopographies and heterogeneous chemistries which are important modulators in microenvironments in vitro. The results showed that hiPSCs formed adhered spheroids with strong pluripotent markers ( Oct4, Nanog, and Sox2) on PM surfaces compared to PS and flat surfaces. After 30-day differentiation, hiPSC-CMs on PM surfaces showed markedly improved myofibril ultrastructures, Ca
Publisher: MDPI AG
Date: 02-12-2021
Abstract: The advanced-stage head and neck cancer (HNC) patients respond poorly to platinum-based treatments. Thus, a reliable pretreatment method for evaluating platinum treatment response would improve therapeutic efficiency and outcomes. This study describes a novel strategy to predict clinical drug responses in HNC patients by using eSelect, a lab-developed biomimetic cell culture system, which enables us to perform ex vivo expansion and drug sensitivity profiling of circulating tumor cells (CTCs). Forty liquid biopsies were collected from HNC patients, and the CTCs were expanded ex vivo using the eSelect system within four weeks. Immunofluorescence staining confirmed that the CTC-derived organoids were positive for EpCAM and negative for CD45. Two illustrative cases present the potential of this strategy for evaluating treatment response. The statistical analysis confirmed that drug sensitivity in CTC-derived organoids was associated with a clinical response. The multivariant logistic regression model predicted that the treatment accuracy of chemotherapy responses achieved 93.75%, and the area under the curves (AUCs) of prediction models was 0.8841 in the whole dataset and 0.9167 in cisplatin specific dataset. In summary, cisplatin sensitivity profiles of patient-derived CTCs expanded ex vivo correlate with a clinical response to cisplatin treatment, and this can potentially underpin predictive assays to guide HNC treatments.
Publisher: American Chemical Society (ACS)
Date: 24-10-2017
Publisher: Wiley
Date: 2007
DOI: 10.1002/BIT.21431
Abstract: Cell adhesion to a scaffold is a prerequisite for tissue engineering. Many studies have been focused on enhancing cell adhesion to synthetic materials that are used for scaffold fabrication. Previously, we showed that immobilization of biotin molecules to chondrocyte surfaces enhanced cell adhesion to avidin-coated biodegradable polymers such as poly-L-lactic acid, poly-D,L-lactic acid and polycaprolactone. However, the endocytosis of cell membrane biotin molecules decreases binding strength between biotinylated-chondrocytes (B-chondrocytes) and avidin-coated substrata, and therefore decreases cell spreading and discourages long-term chondrocytes culture. In this study, we proposed two strategies to solve the shortcoming of the avidin-biotin binding system. First, the avidin-biotin binding system is combined with the intrinsic integrin-dependent adhesion systems in order to enhance long-term cell culture. Second, the incubation temperature is lowered in order to slow down the endocytosis process. We found that the avidin-biotin binding system in combination with FN-integrin binding system enhanced cell adhesion, cell spreading and cell growth. Decrease of cell culture temperature to 4 degrees C enhanced the adhesion of B-chondrocytes to the avidin-coated surfaces, but decreased cell viability and proliferation, compared to culture temperature of 37 degrees C. Whether there is an optimal seeding temperature between 4 and 37 degrees C for both adhesion and proliferation of B-chondrocytes needs further investigation. Our results indicated that modulation of the adhesion conditions could further enhance the efficacy of the avidin-biotin binding system in mediating cell adhesion, and subsequent tissue culture.
Publisher: Royal Society of Chemistry (RSC)
Date: 2012
DOI: 10.1039/C2RA21557H
Publisher: MDPI AG
Date: 18-04-2023
Abstract: Cell cultures of dispersed cells within hydrogels depict the interaction of the cell–extracellular matrix (ECM) in 3D, while the coculture of different cells within spheroids combines both the effects of cell–cell and cell–ECM interactions. In this study, the cell co-spheroids of human bone mesenchymal stem cells/human umbilical vein endothelial cells (HBMSC/HUVECs) are prepared with the assistance of a nanopattern, named colloidal self-assembled patterns (cSAPs), which is superior to low-adhesion surfaces. A phenol-modified gelatin/hyaluronan (Gel-Ph/HA-Ph) hydrogel is used to encapsulate the multicellular spheroids and the constructs are photo-crosslinked using blue light. The results show that Gel-Ph/HA-Ph hydrogels with a 5%-to-0.3% ratio have the best properties. Cells in HBMSC/HUVEC co-spheroids are more favorable for osteogenic differentiation (Runx2, ALP, Col1a1 and OPN) and vascular network formation (CD31+ cells) compared to HBMSC spheroids. In a subcutaneous nude mouse model, the HBMSC/HUVEC co-spheroids showed better performance than HBMSC spheroids in angiogenesis and the development of blood vessels. Overall, this study paves a new way for using nanopatterns, cell coculturing and hydrogel technology for the generation and application of multicellular spheroids.
Publisher: Wiley
Date: 12-01-2016
Abstract: The rapid self-assembly of photolithographic microtiles into large crystalline monolayers is achieved. Crystalline monolayers get trapped at the liquid-liquid interface and re-emerge at the air-liquid interface by mixing a cosolvent, which then deposits on the solid surface in seconds. This method has the potential to assemble different shapes and sizes of microtiles into complex architectures.
Publisher: Elsevier BV
Date: 10-2013
DOI: 10.1016/J.COLSURFB.2013.04.016
Abstract: Alignment of myocytes or myotubes is critical for skeletal muscle tissue engineering. In this study, grooved PLGA films (800nm in width of ridge/groove and 600nm in depth) incorporated with RGD or YIGSR peptides were fabricated to evaluate its efficacy for skeletal muscle tissue engineering. The growth and differentiation of C2C12 myoblasts were enhanced by the presentation of RGD or YIGSR compared with the untreated PLGA control. On the other hand, cell morphology was guided by the grooved structure, i.e. alignment of myoblasts and myotubes with the direction of grooves. This study elucidates the effects of both surface biochemical and topographic cues on the proliferation and differentiation of C2C12 myoblasts on biodegradable polymer films. Combination of surface topography and peptide presentation has a great potential in designing scaffolds for skeletal muscle tissue engineering.
Publisher: MDPI AG
Date: 26-07-2016
DOI: 10.3390/CRYST6080084
Publisher: Wiley
Date: 10-05-2012
Publisher: Wiley
Date: 27-02-2018
Abstract: Micro- and nanotopographies can interfere with bacteria attachment, however, the interplay existing between surface chemistry and topography remains unclear. Here, self-assembled spherical micrometer- silica and nanometer poly(methyl methacrylate) (PMMA)-sized particles are used to make binary colloidal crystal (BCC) topographical patterns to study bacterial attachment. A uniform surface chemistry of allylamine plasma polymer (AAMpp) is coated on the top of the BCCs to study only the topography effects. The uncoated and coated BCCs are exposed to Pseudomonas aeruginosa, and the surfaces and bacteria are characterized using scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and fluorescence microscopy. It is found that bacteria attachment to the uncoated BCCs is delayed and in idual cells are attracted to the small particle regions of the patterns. Surprisingly, this phenomenon is also observed for the AAMpp-coated BCCs, with bacteria attaching to the small particle regions of the pattern, in stark contrast to uniform flat films of AAMpp that are highly adhesive toward P. aeruginosa. Also, the overall levels of bacterial attachment are significantly reduced by the BCC patterns compared to controls. Thus, there is a trade-off that exists between chemistry and topography that can be exploited to delay the onset of P. aeruginosa biofilm formation on surfaces.
Publisher: MDPI AG
Date: 23-04-2023
DOI: 10.3390/JFB14050238
Abstract: Topographical cues on material surfaces are crucial for guiding the behavior of nerve cells and facilitating the repair of peripheral nerve defects. Previously, micron-grooved surfaces have shown great potential in controlling nerve cell alignment for studying the behavior and functions of those cells and peripheral nerve regeneration. However, the effects of smaller-sized topographical cues, such as those in the submicron- and nano-scales, on Schwann cell behavior remain poorly understood. In this study, four different submicron-grooved polystyrene films (800/400, 800/100, 400/400, and 400/100) were fabricated to study the behavior, gene expression, and membrane potential of Schwann cells. The results showed that all submicron-grooved films could guide the cell alignment and cytoskeleton in a groove depth-dependent manner. Cell proliferation and cell cycle assays revealed that there was no significant difference between the submicron groove s les and the flat control. However, the submicron grooves can direct the migration of cells and upregulate the expression of critical genes in axon regeneration and myelination (e.g., MBP and Smad6). Finally, the membrane potential of the Schwann cells was significantly altered on the grooved s le. In conclusion, this study sheds light on the role of submicron-grooved patterns in regulating the behavior and function of Schwann cells, which provides unique insights for the development of implants for peripheral nerve regeneration.
Publisher: American Chemical Society (ACS)
Date: 16-04-2021
Publisher: American Chemical Society (ACS)
Date: 25-07-2023
Publisher: Royal Society of Chemistry (RSC)
Date: 2012
DOI: 10.1039/C2LC20732J
Abstract: Gradient surfaces are emerging tools for investigating mammalian cell-surface interactions in high throughput. We demonstrate the electrochemical fabrication of an orthogonal gradient platform combining a porous silicon (pSi) pore size gradient with an orthogonal gradient of peptide ligand density. pSi gradients were fabricated via the anodic etching of a silicon wafer with pore sizes ranging from hundreds to tens of nanometers. A chemical gradient of ethyl-6-bromohexanoate was generated orthogonally to the pSi gradient via electrochemical attachment. Subsequent hydrolysis and activation of the chemical gradient allowed for the generation of a cyclic RGD gradient. Whilst mesenchymal stem cells (MSC) were shown to respond to both the topographical and chemical cues arising from the orthogonal gradient, the MSC's responded more strongly to changes in RGD density than to changes in pore size during short-term culture.
Publisher: Springer Science and Business Media LLC
Date: 03-01-2021
Publisher: American Chemical Society (ACS)
Date: 21-05-2020
Abstract: The fusion of skeletal myoblasts is a critical step in myotube formation and muscle maturation. Previously, we demonstrated that nanogrooves improved myoblast fusion via end-to-end fusion, which in turn generated parallel myotubes. However, the effect of serum components on the end-to-end fusion mechanism is unclear. In the current study, the synergistic effect of nanogrooves and human platelet lysate (hPL) on the growth and fusion of skeletal myoblasts was studied. Four types of nanogrooves (400 and 800 nm width 100 and 400 nm depth) were used. Cell spreading, growth, and differentiation were screened on these nanogrooves in media formulated with hPL or fetal bovine serum (FBS), along with the flat substrate as a control group. The results showed that the deeper nanogrooves induced better alignment of myoblasts. hPL-adapted skeletal myoblasts (i.e., myoblasts@hPL) showed a smaller cell size with a more elongated morphology than myoblasts@FBS. During cell growth, the expression of myogenic genes (Myf5, MyoD, and MyoG) in myoblasts@hPL was lower than in myoblasts@FBS. During cell differentiation, myoblasts@hPL also expressed a lower level of myogenic and myosin heavy chain (MHC) genes. MHC-positive myoblasts@hPL without myotubes were found on all surfaces. Myomaker, an essential myoblast fusion gene, was upregulated during growth but downregulated during differentiation in myoblasts@hPL. Fibronectin-coated surfaces facilitate cell spreading and growth but still cannot support myoblast@hPL fusion. The results implied that hPL either lacks promotor factors or contains inhibitors on mouse skeletal myoblast fusion. This study reveals the effect of biophysical and biochemical cues on myoblast fusion and their potential for muscle tissue engineering.
Publisher: American Chemical Society (ACS)
Date: 20-02-2015
Abstract: Ordered surface nanostructures have attracted much attention in biotechnology and biomedical engineering because of their potential to modulate cell-surface interactions in a controllable manner. However, the ability to fabricate large area ordered nanostructures is limited because of high costs and low speed of fabrication. Here, we have fabricated ordered nanostructures with large surface areas (1.5 × 1.5 cm(2)) using a combination of facile techniques including colloidal self-assembly, colloidal lithography and glancing angle deposition (GLAD). Polystyrene (722 nm) colloids were self-assembled into a hexagonally close-packed (hcp) crystal array at the water-air interface, transferred on a biocompatible tantalum (Ta) surface and used as a mask to generate an ordered Ta pattern. The Ta was deposited by sputter coating through the crystal mask creating approximately 60-nm-high feature sizes. The feature size was further increased by approximately 200-nm-height respectively using GLAD, resulting in the fabrication of four different surfaces (FLAT, Ta60, GLAD100, and GLAD200). Cell adhesion, proliferation, and osteogenic differentiation of primary human adipose-derived stem cells (hADSCs) were studied on these ordered nanostructures for up to 2 weeks. Our results suggested that cell spreading, focal adhesion formation, and filopodia extension of hADSCs were inhibited on the GLAD surfaces, while the growth rate was similar between each surface. Immunostaining for type I collagen (COL1) and osteocalcin (OC) showed that there was higher osteogenic components deposited on the GLAD surfaces compared to the Ta60 and FLAT surfaces after 1 week of osteogenic culture. After 2 weeks of osteogenic culture, alkaline phosphatase (ALP) activity and the amount of calcium was higher on the GLAD surfaces. In addition, osteoblast-like cells were confluent on Ta60 and FLAT surfaces, whereas the GLAD surfaces were not fully covered suggesting that the cell-cell interactions are stronger than cell-substrate interactions on GLAD surfaces. Visible extracellular matrix deposits decorated the porous surface can be found on the GLAD surfaces. Depth profiling of surface components using a new Ar cluster source and X-ray photoelectron spectroscopy (XPS) showed that deposited extracellular matrix on GLAD surfaces is rich in nitrogen. The fabricated ordered surface nanotopographies have potential to be applied in erse fields, and demonstrate that the behavior of human stem cells can be directed on these ordered nanotopographies, providing new knowledge for applications in biomaterials and tissue engineering.
Publisher: Wiley
Date: 20-07-2023
Abstract: Systemic therapy is the primary treatment for advanced thymic malignancies. However, there is an urgent need to improve clinical outcome. Personalized treatment based on predictive biomarkers is a potential approach to address this requirement. In this study, we aimed to show the correlation between drug sensitivity tests on CTCs‐derived organoids and clinical response in patients with thymic malignancies. This approach carries the potential to create personalized cancer avatars and improve treatment outcome for patients. We previously reported potential treatment outcome prediction with patient‐derived organoids (cancer avatars) in patients with pancreatic ductal adenocarcinoma. To further investigate the feasibility of this approach in advanced thymic malignancies, we conducted a study in which 12 patients were enrolled and 21 liquid biopsies were performed. Cancer avatars were successfully derived in 16 out of 21 s les (success rate 76.2%). We found a sensitivity of 1.0 and specificity of 0.6 for drug sensitivity tests on the cancer avatars, and a two‐tailed Fisher's exact test revealed a significant correlation between drug sensitivity tests and clinical responses ( p = 0.0275). This study supports the potential of circulating tumor cell‐derived organoids to inform personalized treatment for advanced thymic malignancies. Further validation of this proof of concept finding is ongoing.
Publisher: Elsevier BV
Date: 12-2018
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7TB01878A
Abstract: Surface nanotopographies are a powerful way of manipulating cell morphology and subsequent differentiation.
Publisher: Wiley
Date: 2010
DOI: 10.1002/BIT.22697
Abstract: Alignment and fusion of myoblasts into parallel arrays of multinucleated myotubes are critical in skeletal muscle tissue engineering. It is well known that contact guidance by grooves/ridges structures induces myoblasts to align and to migrate along the anisotropic direction. In this study, two series of grooved substrata with different widths (450 and 900 nm) and different depths (100, 350, and 550 nm) were studied on their effects on myoblast adhesion, proliferation, and differentiation into myotubes. We found that C2C12 cells were aligned and elongated along the direction of grooves. Groove depth was more influential on cellular morphology, proliferation, and differentiation than groove width. While cell proliferation was retarded on the grooved surfaces especially on the substrate with 900/550 nm (width/depth), differentiation was also enhanced on the patterned surfaces compared to the flat control. Our results demonstrated the potential of grooved substrata with submicron scale in skeletal muscle tissue engineering.
Publisher: American Vacuum Society
Date: 12-10-2015
DOI: 10.1116/1.4931889
Abstract: Ordered surface nanostructures have attracted much attention in different fields including biomedical engineering because of their potential to study the size effect on cellular response and modulation of cell fate. However, the ability to fabricate large-area ordered nanostructures is typically limited due to high costs and low speed of fabrication. Herein, highly ordered nanostructures with large surface areas (& .5 × 1.5 cm2) were fabricated using a combination of facile techniques including colloidal self-assembly, colloidal lithography, and glancing angle deposition (GLAD). An ordered tantalum (Ta) pattern with 60-nm-height was generated using colloidal lithography. A monolayer of colloidal crystal, i.e., hexagonal close packed 720 nm polystyrene particles, was self-assembled and used as a mask. Ta patterns were subsequently generated by evaporation of Ta through the mask. The feature size was further increased by 100 or 200 nm using GLAD, resulting in the fabrication of four different surfaces (FLAT, Ta60, GLAD100, and GLAD200). Cell adhesion, proliferation, and mineralization of MG63 osteoblast-like cells were investigated on these ordered nanostructures over a 1 week period. Our results showed that cell adhesion, spreading, focal adhesion formation, and filopodia formation of the MG63 osteoblast-like cells were inhibited on the GLAD surfaces, especially the initial (24 h) attachment, resulting in a lower cell density on the GLAD surfaces. After 1 week culture, alkaline phosphatase activity and the amount of Ca was higher on the GLAD surfaces compared with Ta60 and FLAT controls, suggesting that the GLAD surfaces facilitate differentiation of osteoblasts. This study demonstrates that ordered Ta nanotopographies synthesized by combining colloidal lithography with GLAD can improve the mineralization of osteoblast-like cells providing a new platform for biomaterials and bone tissue engineering.
Publisher: SAGE Publications
Date: 12-08-2008
Abstract: Chondrocytes have been demonstrated to be sensitive to mechanical stimuli, such as compression, tension, shear force, and hydrostatic pressure. The responses of chondrocytes to mechanical compression have been often studied in vitro with cartilage and chondrocyte/hydrogel systems. The aim of this study was to investigate the effects of dynamic compression on gene expression of rabbit chondrocytes which were seeded in elastic polyurethane scaffolds with or without collagen gel encapsulation. Dynamic compression of 20% or 30% strain with 0.1 Hz frequency was applied to the cell-seeded scaffolds for 4, 8, 12, or 24 h, and then the expression of the three genes related to chondrogenic phenotype, type I and II collagens and aggrecan, was analyzed by RT-PCR. We also investigated the gene expression of the compressed chondrocytes, which had experienced 12-h 30% strain dynamic loading, during the post-compression resting period. We found that the expression of type II collagen did not seem to respond to cyclic compression. On the other hand, aggrecan gene was stimulated by dynamic compression. The stimulatory effect disappeared gradually after the dynamic compression was ceased. Furthermore, the mechano-response of the chondrocytes to aggrecan expression was delayed by collagen gel encapsulation. The expression of type I collagen was enhanced by collagen gel. We found that collagen gel encapsulation prolonged the expression of aggrecan and type I collagen during post-compression resting period. We demonstrated that mechanical and biochemical stimuli modulate the gene expression of chondrocytes.
Publisher: Wiley
Date: 09-2023
DOI: 10.1002/BRX2.36
Publisher: MDPI AG
Date: 05-08-2017
DOI: 10.3390/POLYM9080343
Publisher: American Chemical Society (ACS)
Date: 06-01-2022
Abstract: Extracellular matrix (ECM) of the tumor microenvironment (TME), including topography and biological molecules, is crucial in cancer cell attachment, growth, and even the sensitivity to the chemo and cell drugs treatment. This study hypothesizes that mimic ECM structures can alter the attachment and drug sensitivity of cancer cells. A family of artificial ECM called colloidal self-assembled patterns (cSAPs) was fabricated to mimic tumor ECM structures. Cell adhesion, proliferation, and drug sensitivity of the A549 non-small cell lung cancer (NSCLC) cells were studied on 24 cSAPs, named cSAP#1-cSAP#24, where surface topography and wettability were distinct. The results showed that cell adhesion and cell spreading were generally reduced on cSAPs compared to the flat controls. In addition, the synergistic effect of cSAPs and several chemo drugs on cell survival was investigated. Interestingly, A549 cells were more sensitive to the combination of doxorubicin and cSAP#4. Under this condition, the focal adhesion kinase (FAK) signaling was downregulated while p53 signaling was upregulated, confirmed by real-time PCR and western blot analysis. It indicates that the specific surface structure could induce higher drug sensitivity and in vitro anoikis of A549 cells. A serum alternative, human platelet lysate (hPL), and different cSAPs were examined to verify our hypothesis. The result further confirmed that cell adhesion strongly affected the drug sensitivity of A549 cells. This study demonstrates that the tumor ECM is vital in cancer cell activity and drug sensitivity therefore, it should be considered in drug discovery and therapeutic regimens.
Publisher: Elsevier BV
Date: 02-2012
DOI: 10.1016/J.ACTBIO.2011.09.030
Abstract: Substrate stiffness is emerging as an effective tool for the regulation of cell behaviours such as locomotion, proliferation and differentiation. In order to explore the potential application of this biophysical tool, material platforms displaying lateral and continuously graded stiffness are advantageous since they allow the systematic exploration of adherent cell response to substrate stiffness and the tuning of the material to elicit the desired cell behaviour. Here, we demonstrate a simple approach towards the fabrication of polydimethylsiloxane (PDMS) stiffness gradients (with an indentation modulus of 190 kPa-3.1 MPa across a 12 mm distance) by means of a temperature gradient during curing. We then apply these stiffness gradients to the screening of osteogenic differentiation in rat mesenchymal stem cells (rMSCs). Our proof-of-principle results show that mineralization of rMSCs is strongly dependent on the PDMS substrate stiffness, but is also influenced by the display of extracellular matrix proteins preadsorbed on the gradients. This screening capability holds tremendous potential for the design of improved implant materials and tissue engineering scaffolds.
Publisher: Elsevier BV
Date: 07-2020
Publisher: American Chemical Society (ACS)
Date: 19-01-2023
Publisher: Springer Science and Business Media LLC
Date: 11-11-2016
DOI: 10.1038/SREP36845
Abstract: Human induced pluripotent stem cells (hiPSCs) are capable of differentiating into any cell type and provide significant advances to cell therapy and regenerative medicine. However, the current protocol for hiPSC generation is relatively inefficient and often results in many partially reprogrammed colonies, which increases the cost and reduces the applicability of hiPSCs. Biophysical stimulation, in particular from tuning cell-surface interactions, can trigger specific cellular responses that could in turn promote the reprogramming process. In this study, human fibroblasts were reprogrammed into hiPSCs using a feeder-free system and episomal vectors using novel substrates based on binary colloidal crystals (BCCs). BCCs are made from two different spherical particle materials (Si and PMMA) ranging in size from nanometers to micrometers that self-assemble into hexagonal close-packed arrays. Our results show that the BCCs, particularly those made from a crystal of 2 μm Si and 0.11 μm PMMA particles (2SiPM) facilitate the reprogramming process and increase the proportion of fully reprogrammed hiPSC colonies, even without a vitronectin coating. Subsequent isolation of clonal hiPSC lines demonstrates that they express pluripotent markers (OCT4 and TRA-1-60). This proof-of-concept study demonstrates that cell reprogramming can be improved on substrates where surface properties are tailored to the application.
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C8PY00457A
Abstract: We exploit the Thorpe–Ingold effect as a spontaneous end group transformation method during photo-induced polymerization of methacrylates using the functional (2-hydroxy-4′-(2-hydroxyethoxy)-2-methylpropio-phenone) species as radical photoinitiator.
Publisher: MDPI AG
Date: 16-11-2020
Abstract: Small cell lung cancer (SCLC) represents one of the most aggressive malignancies among cancer types. Not only tumor s le availability is limited, but also the ability for tumor cells to rapidly acquire drug resistance are the rate-limiting bottlenecks for overall survival in current clinical settings. A liquid biopsy capable of capturing and enriching circulating tumor cells (CTCs), together with the possibility of drug screening, is a promising solution. Here, we illustrate the development of a highly efficient ex vivo CTC expansion system based on binary colloidal crystals substrate. Clinical s les were enrolled from 22 patients with SCLC in the study. The CTCs were enriched and expanded from the collected peripheral blood s les. Expanded cells were analyzed for protein expression and observed for drug sensitivity with the use of immunofluorescence and ATP titer evaluation, respectively. Successful CTC spheroid proliferation was established after 4 weeks within 82% of all the collected peripheral blood s les from enrolled patients. Upon immunofluorescence analysis, the enriched cells showed positive markers for EpCAM, TTF-1, synaptophysin and negative for CD45. Additionally, the expanded CTCs demonstrated marked heterogeneity in the expression of E-cadherin and N-cadherin. In a preliminary case series, the drug sensitivity of patient-derived CTC to cisplatin and etoposide was studied to see the correlation with the corresponding therapeutic outcome. In conclusion, our study demonstrates that it is possible to efficiently expand CTCs from SCLC within a clinically relevant time frame the biomarker information generated from enriched CTCs can assist the selection of effective drugs and improve disease outcome.
Publisher: Elsevier BV
Date: 09-2011
DOI: 10.1016/J.ACTBIO.2011.05.021
Abstract: The topographic and mechanical characteristics of engineered tissue constructs, simulating native tissues, should benefit tissue engineering. Previous studies reported that surface topography and substrate rigidity provide biomechanical cues to modulate cellular responses such as alignment, migration and differentiation. To fully address this issue, the present study aimed to examine the influence of nanogrooved substrates with different stiffnesses on the responses of rat cardiomyocytes. Nanogrooved substrates (450nm in groove/ridge width 100 or 350nm in depth) made of polystyrene and polyurethane were prepared by imprinting from polydimethylsiloxane molds. The morphology and orientation of cardiomyocytes attached to the substrates were found to be influenced mainly by the nanogrooved structures, while the contractile function of the cells was regulated by the coupled effect of surface topography and substrate stiffness. The distribution of intracellular structural proteins such as vinculin and F-actin showed that the surface topography and substrate stiffness regulated the organization of the actin cytoskeleton and focal adhesion complexes, and consequently the contractile behavior of the cardiomyocytes. The beating rates of the cultured cardiomyocytes were dependent on both the surface topography and the substrate stiffness. The study provides insights into the interaction between cardiomyocytes and biomaterials, and benefits cardiac tissue engineering.
Publisher: Elsevier BV
Date: 11-2018
DOI: 10.1016/J.CIS.2018.08.005
Abstract: The organization of matter into hierarchical structures is a fundamental characteristic of functional materials and living organisms. Binary colloidal crystal (BCC) systems present a ersified range of nanotopographic structures where large and small colloidal particles simultaneously self-assemble into either 2D monolayer or 3D hierarchical crystal lattices. More importantly, understanding how BCCs form opens up the possibility to fabricate more complex systems such as ternary or quaternary colloidal crystals. Monolayer BCCs can also offer the possibility to achieve surface micro- and nano-topographies with heterogeneous chemistries, which can be challenging to achieve with other traditional fabrication tools. A number of fabrication methods have been reported that enable generation of BCC structures offering high accuracy in growth with controllable stoichiometries however, it is still a challenge to make uniform BCC structures over large surface areas. Therefore, fully understand the mechanism of binary colloidal self-assembly is crucial and new/combinational methods are needed. In this review, we summarize the recent advances in BCC fabrication using particles made of different materials, shapes, and dispersion medium. Depending on the potential application, the degree of order and efficiency of crystal formation has to be determined in order to induce variability in the intended lattice structures. The mechanisms involved in the formation of highly ordered lattice structures from binary colloidal suspensions and applications are discussed. The generation of BCCs can be controlled by manipulation of their extensive phase behavior, which facilitates a wide range potential applications in the fields of both material and biointerfacial sciences including photonics, biosensors, chromatography, antifouling surfaces, biomedical devices, and cell culture tools.
Publisher: Wiley
Date: 21-04-2015
Publisher: Informa UK Limited
Date: 13-08-2012
DOI: 10.1080/09205063.2012.696310
Abstract: Dynamic compression is an important physical stimulus for the physiology of chondrocyte and articular cartilage tissue engineering. In this study, modulation of chondrocyte behaviors in chitosan/collagen scaffolds with different mechanical properties under free-swelling or dynamic compression conditions was investigated. Rabbit chondrocytes were seeded in chitosan/collagen scaffolds crosslinked by genipin (GP) with different concentrations, and then cultured for 3 days prior to cyclic compression of 40% strain, 0.1 Hz, and 30 min/day for 2 weeks. The results showed that the cell proliferation was increased with increasing genipin concentrations and dynamic compression. On the other hand, although total glycosaminoglycans (GAGs) deposition was enhanced by dynamic compression under certain conditions, e.g. the GP0.5 chitosan/collagen scaffolds for 1 week of compression culture, normalized GAGs deposition per cell was decreased by dynamic compression. Our results suggest that while several studies suggest that dynamic compression benefits articular cartilage tissue engineering, many factors including scaffold types and compression conditions determine the outcome of dynamic compression culture.
Start Date: 06-2015
End Date: 06-2018
Amount: $360,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 2020
End Date: 12-2020
Amount: $233,000.00
Funder: Australian Research Council
View Funded Activity