ORCID Profile
0000-0003-0317-3225
Current Organisations
Universiteit van Amsterdam
,
Universiteit van Amsterdam Anton Pannekoek Instituut voor Sterrenkunde
,
Nanyang Technological University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Elsevier
Date: 2015
Publisher: Wiley
Date: 06-08-2018
Publisher: Wiley
Date: 28-06-2017
Abstract: Sodium-ion batteries (SIBs) are considered as promising alternatives to lithium-ion batteries owing to the abundant sodium resources. However, the limited energy density, moderate cycling life, and immature manufacture technology of SIBs are the major challenges hindering their practical application. Recently, numerous efforts are devoted to developing novel electrode materials with high specific capacities and long durability. In comparison with carbonaceous materials (e.g., hard carbon), partial Group IVA and VA elements, such as Sn, Sb, and P, possess high theoretical specific capacities for sodium storage based on the alloying reaction mechanism, demonstrating great potential for high-energy SIBs. In this review, the recent research progress of alloy-type anodes and their compounds for sodium storage is summarized. Specific efforts to enhance the electrochemical performance of the alloy-based anode materials are discussed, and the challenges and perspectives regarding these anode materials are proposed.
Publisher: Wiley
Date: 08-10-2014
Abstract: Flexible three-dimensional (3D) nanoarchitectures have received tremendous interest recently because of their potential applications in wearable electronics, roll-up displays, and other devices. The design and fabrication of a flexible and robust electrode based on cobalt sulfide/reduced graphene oxide/carbon nanotube (CoS2 /RGO-CNT) nanocomposites are reported. An efficient hydrothermal process combined with vacuum filtration was used to synthesize such composite architecture, which was then embedded in a porous CNT network. This conductive and robust film is evaluated as electrocatalyst for the hydrogen evolution reaction. The synergistic effect of CoS2 , graphene, and CNTs leads to unique CoS2 /RGO-CNT nanoarchitectures, the HER activity of which is among the highest for non-noble metal electrocatalysts, showing 10 mA cm(-2) current density at about 142 mV overpotentials and a high electrochemical stability.
Publisher: Elsevier BV
Date: 04-2019
Publisher: Wiley
Date: 04-07-2016
Publisher: Elsevier BV
Date: 12-2016
Publisher: Wiley
Date: 22-09-2017
Abstract: Hybrid metal-ion capacitors (MICs) (M stands for Li or Na) are designed to deliver high energy density, rapid energy delivery, and long lifespan. The devices are composed of a battery anode and a supercapacitor cathode, and thus become a tradeoff between batteries and supercapacitors. In the past two decades, tremendous efforts have been put into the search for suitable electrode materials to overcome the kinetic imbalance between the battery-type anode and the capacitor-type cathode. Recently, some transition-metal compounds have been found to show pseudocapacitive characteristics in a nonaqueous electrolyte, which makes them interesting high-rate candidates for hybrid MIC anodes. Here, the material design strategies in Li-ion and Na-ion capacitors are summarized, with a focus on pseudocapacitive oxide anodes (Nb
Publisher: Wiley
Date: 07-11-2020
Abstract: Black phosphorus has aroused attention as an attractive anode for sodium‐ion batteries, because of its high theoretical capacity. Nevertheless, its practical application is hindered by the large volume expansion, which results in rapid capacity decay. Herein, we report that this challenge can be addressed by using an elaborately designed binder for the phosphorus‐based electrodes. The incorporation of amylose molecules with helical structures endows the linear polyacrylic acid polymer binders with extraordinary stretchability and elasticity under 400 % strain. When it is applied as a binder for black‐phosphorus‐based anodes for sodium‐ion batteries, the adhesion between the electrode and the current collector is much stronger (2.95 N) than that of the polyvinylidene difluoride (PVDF) binder based one (1.90 N). The electrode delivered a capacity as high as 1280 mAh g −1 at 200 mA g −1 after 300 cycles, which is better than the electrode with PVDF binder. Impressively, even after 1000 cycles, the electrode with our binder exhibits a capacity retention of 80 %. Our work sheds light on the significance of the rational design of effective binders and provides a new strategy to further improve the electrochemical performance of phosphorus‐based materials for battery applications, which can be added on directly to other new electrode materials development strategies.
Publisher: Wiley
Date: 04-12-2018
Publisher: Wiley
Date: 21-04-2015
Abstract: Transition metal sulfides gain much attention as electrode materials for supercapacitors due to their rich redox chemistry and high electrical conductivity. Designing hierarchical nanostructures is an efficient approach to fully utilize merits of each component. In this work, amorphous MoS(2) is firstly demonstrated to show specific capacitance 1.6 times as that of the crystalline counterpart. Then, crystalline core@amorphous shell (Ni(3)S(4)@MoS(2)) is prepared by a facile one-pot process. The diameter of the core and the thickness of the shell can be independently tuned. Taking advantages of flexible protection of amorphous shell and high capacitance of the conductive core, Ni(3)S(4) @amorphous MoS(2) nanospheres are tested as supercapacitor electrodes, which exhibit high specific capacitance of 1440.9 F g(-1) at 2 A g(-1) and a good capacitance retention of 90.7% after 3000 cycles at 10 A g(-1). This design of crystalline core@amorphous shell architecture may open up new strategies for synthesizing promising electrode materials for supercapacitors.
Publisher: Wiley
Date: 21-06-2017
Publisher: Wiley
Date: 04-08-2017
Publisher: Wiley
Date: 28-11-2019
Publisher: Elsevier BV
Date: 03-2014
Publisher: Elsevier BV
Date: 11-2015
Publisher: American Chemical Society (ACS)
Date: 28-09-2018
Abstract: Presented are the novel Ti
Publisher: Elsevier BV
Date: 04-2015
Publisher: Springer Science and Business Media LLC
Date: 10-06-2016
Publisher: Wiley
Date: 27-01-2020
Abstract: Herein, the facile preparation of ultrathin (≈3.8 nm in thickness) 2D cobalt phosphate (CoPi) nanoflakes through an oil-phase method is reported. The obtained nanoflakes are composed of highly ordered mesoporous (≈3.74 nm in diameter) structure and exhibit an amorphous nature. Attractively, when doped with nickel, such 2D mesoporous Ni-doped CoPi nanoflakes display decent electrocatalytic performances in terms of intrinsic activity, and low kinetic barrier toward the oxygen evolution reaction (OER). Particularly, the optimized 10 at% Ni-doped CoPi nanoflakes (denoted as Ni10-CoPi) deliver a low overpotential at 10 mA cm
Publisher: American Chemical Society (ACS)
Date: 22-10-2018
Abstract: Though 2D transition metal dichalcogenides have attracted a lot of attention in energy-storage applications, the applications of NbSe
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C8EE01755G
Abstract: The off-centered Ge leads to the ultralow lattice thermal conductivity and record high average ZT for n-type PbSe.
Publisher: MDPI AG
Date: 2019
Abstract: Segmented cells enable real time visualization of the flow distribution in vanadium redox flow batteries by local current or voltage mapping. The lateral flow of current within thick porous electrodes, however, impairs the local resolution of the detected signals. In this study, the open circuit voltage immediately after the cessation of charge/discharge is used for the mapping of reactant conversion. This quantity is not h ered by lateral flow of current and can be conveniently transformed to the corresponding state of charge. The difference between theoretically calculated and experimentally determined conversion (change in the state of charge) across the electrode is used to determine local variations in conversion efficiency. The method is validated by systematic experiments using electrodes with different modifications, varying current densities and flow configurations. The procedure and the interpretation are simple and scalable to any size of flow cell.
Publisher: Elsevier BV
Date: 05-2018
Publisher: Royal Society of Chemistry (RSC)
Date: 2020
DOI: 10.1039/C9TA13651G
Abstract: A dual-functional metal template achieves on-demand control of metal–N–C sites, porous structures, and surface wettability in a carbon nanofiber catalyst, enabling flexible zinc–air batteries with outstanding performance under various mechanical deformations.
Publisher: Wiley
Date: 21-10-2018
Abstract: This work reports the thermoelectric properties of the CuSbSe
Publisher: Elsevier BV
Date: 12-2019
Publisher: American Chemical Society (ACS)
Date: 06-05-2014
DOI: 10.1021/AM500158S
Abstract: Metallopolymer nanowalls were prepared through a simple wet-chemical process using reduced graphene oxides as heterogeneous nucleation aids, which also help to form conductive electron paths. The nanowalls grow vertically on graphene surface with 100-200 nm in widths and ∼20 nm in thickness. The Fe-based metallopolymer nanowall-based electrode shows best performance as O2 cathode exhibiting high round-trip efficiencies and stable cycling performance among other transition metal containing metallopolymer counterparts. The electrode delivers discharge-charge capacities of 1000 mAh/g for 40 cycles and maintains round-trip efficiencies >78% at 50 mA/g. The 1(st)-cycle round-trip efficiencies are 79%, 72%, and 65% at current densities of 50, 200, and 400 mA/g, respectively. The NMR analysis of the Fe-based metallopolymer based electrode after 40 cycles reveals slow formation of the side products, CH3CO2Li and HCO2Li.
Publisher: Royal Society of Chemistry (RSC)
Date: 2022
DOI: 10.1039/D2TA05593G
Abstract: K + doping into the Na-site of a Na 3 V 2 (PO 4 ) 2 O 2 F cathode creates Na vacancies and increases disordering in the crystal structure, which dramatically accelerates Na ion diffusivity with outstanding rate and cycle performances in sodium-ion full batteries.
Publisher: American Chemical Society (ACS)
Date: 15-04-2015
Abstract: Metal vanadium phosphates (MVP), particularly Li3V2(PO4)3 (LVP) and Na3V2(PO4)3 (NVP), are regarded as the next-generation cathode materials in lithium/sodium ion batteries. These materials possess desirable properties such as high stability, theoretical capacity, and operating voltages. Yet, low electrical/ionic conductivities of LVP and NVP have limited their applications in demanding devices such as electric vehicles. In this work, a novel synthesis route for the preparation of LVP/NVP micro/mesoporous 3D foams via assembly of elastin-like polypeptides is demonstrated. The as-synthesized MVP 3D foams consist of microporous networks of mesoporous nanofibers, where the surfaces of in idual fibers are covered with MVP nanocrystallites. TEM images further reveal that LVP/NVP nanoparticles are about 100-200 nm in diameter, with each particle enveloped by a 5 nm thick carbon shell. The MVP 3D foams prepared in this work exhibit ultrafast rate capabilities (79 mA h g(-1) at 100C and 66 mA h g(-1) at 200C for LVP 3D foams 73 mA h g(-1) at 100C and 51 mA h g(-1) at 200C for NVP 3D foams) and excellent cycle performance (almost 100% performance retention after 1000 cycles at 100C) their properties are far superior compared to current state-of-the-art active materials.
Publisher: Wiley
Date: 08-2021
DOI: 10.1002/EXP.20210002
Abstract: Biological applications of nanomaterials as delivery carriers have been embedded in traditional biomedical research for decades. Despite lagging behind, recent significant breakthroughs in the use of nanocarriers as tools for plant biotechnology have created great interest. In this Perspective, we review the outstanding recent works in nanocarrier‐mediated plant transformation and its agricultural applications. We analyze the chemical and physical properties of nanocarriers determining their uptake efficiency and transport throughout the plant body.
Publisher: Springer Science and Business Media LLC
Date: 30-08-2018
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C8TA00464A
Abstract: Binder free titanium carbide decorated graphite felt as high performance negative electrode in vanadium redox flow battery.
Publisher: Elsevier BV
Date: 2014
Publisher: Wiley
Date: 23-12-2015
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C8NR06675B
Abstract: A scalable synthesized foam-like FeS 2 nanostructure with an interconnected skeleton that is composed of small particles is used for high-capacity sodium-ion batteries.
Publisher: Wiley
Date: 04-2020
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C4NR06527A
Abstract: We report the synthesis of two-dimensional (2D) NiCo2O4 nanosheet-coated three-dimensional graphene network (3DGN), which is then used as an electrode for high-rate, long-cycle-life supercapacitors. Using the 3DGN and nanoporous nanosheets, an ultrahigh specific capacitance (2173 F g(-1) at 6 A g(-1)), excellent rate capability (954 F g(-1) at 200 A g(-1)) and superior long-term cycling performance (94% capacitance retention after 14,000 cycles at 100 A g(-1)) are achieved.
Publisher: Wiley
Date: 16-06-2014
Abstract: In this work, a novel waste-to-resource strategy to convert waste bacteria into a useful class of cathode materials, lithium metal phosphate (LiMPO4 M = Fe, Mn), is presented. Escherichia coli (E. coli) bacteria used for removing phosphorus contamination from wastewater are harvested and used as precursors for the synthesis of LiMPO4. After annealing, LiFePO4 and LiMnPO4 nanoparticles with dimensions around 20 nm are obtained. These particles are found to be enveloped in a carbon layer with a thickness around 3-5 nm, generated through the decomposition of the organic matter from the bacterial cell cytoplasm. The battery performance for the LiFePO4 is evaluated. A high discharge capacity of 140 mAh g(-1) at 0.1 C with a flat plateau located at around 3.5 V is obtained. In addition, the synthesized particles display excellent stability and rate capabilities. Even under a high C rate of 10 C, a stable discharge capacity of 75.4 mAh g(-1) can still be achieved.
Publisher: American Chemical Society (ACS)
Date: 29-07-2014
DOI: 10.1021/JP505026F
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C9NR05588F
Abstract: The ever-increasing global energy demand and rising price of raw materials adopted in currently prevalent lithium ion batteries (LIBs) have boosted the development of potassium ion batteries (KIBs).
Publisher: Wiley
Date: 27-10-2021
Publisher: Elsevier BV
Date: 2015
Publisher: American Chemical Society (ACS)
Date: 02-07-2019
Abstract: Heterostructures with abundant phase boundaries are compelling for surface-mediated electrochemical applications. However, rational design of such bifunctional electrocatalysts for efficient hydrogen and oxygen evolution reactions (HER and OER) is still challenging. Here, due to the well-matched lattice parameters, we easily achieved the epitaxy of two-dimensional ternary nickel thiophosphate (NiPS
Publisher: Wiley
Date: 27-10-2015
Publisher: Royal Society of Chemistry (RSC)
Date: 2021
DOI: 10.1039/D0QM00898B
Abstract: Reported here is a nanocomposite consisting of Ni nanoparticles loaded on V 4 C 3 T x MXene as a highly efficient NRR electrocatalyst. The critical role of V 4 C 3 T x MXene in suppressing the HER activity and enhancing the NRR performance is investigated.
Publisher: Elsevier BV
Date: 07-2014
Publisher: American Chemical Society (ACS)
Date: 03-12-2018
Abstract: The emerging sodium ion batteries (SIBs) are believed to be prospective substitutes for lithium ion batteries (LIBs) because of the wide distribution of sodium resources. However, to compensate for the sluggish reaction kinetics and higher intrinsic potential of Na
Publisher: Wiley
Date: 22-04-2013
Abstract: A facile and general method is reported to prepare ordered porous graphene-based binder-free electrodes on a large scale. This preparation process allows the easy adjustment of the selected components, weight ratio of componets, and the thickness of the electrodes. Such ordered porous electrodes demonstrate superior Li storage properties for ex le, graphene-Fe3 O4 @C depicts high capacities of 1123.8 and 505 mAh g(-1) at current densities of 0.5 and 10 A g(-1) , respectively.
Publisher: Wiley
Date: 08-06-2017
Abstract: Recent progress in the currently available methods of producing black phosphorus bulk and phosphorene are presented. The effective passivation approaches toward improving the air stability of phosphorene are also discussed. Furthermore, the research efforts on the phosphorene and phosphorene-based materials for potential applications in lithium ion batteries, sodium ion batteries, and thermoelectric devices are summarized and highlighted. Finally, the outlook including challenges and opportunities in these research fields are discussed.
Publisher: American Astronomical Society
Date: 09-2021
Publisher: Elsevier BV
Date: 2015
Publisher: Elsevier BV
Date: 11-2013
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7QM00306D
Abstract: The recent advances in solution-synthesized thermoelectric materials with hybrid architectures have been briefly summarized.
Publisher: American Chemical Society (ACS)
Date: 23-10-2015
Abstract: Sodium-ion batteries (SIBs) are considered as complementary alternatives to lithium-ion batteries for grid energy storage due to the abundance of sodium. However, low capacity, poor rate capability, and cycling stability of existing anodes significantly hinder the practical applications of SIBs. Herein, ultrathin two-dimensional SnS2 nanosheets (3-4 nm in thickness) are synthesized via a facile refluxing process toward enhanced sodium storage. The SnS2 nanosheets exhibit a high apparent diffusion coefficient of Na(+) and fast sodiation/desodiation reaction kinetics. In half-cells, the nanosheets deliver a high reversible capacity of 733 mAh g(-1) at 0.1 A g(-1), which still remains up to 435 mAh g(-1) at 2 A g(-1). The cell has a high capacity retention of 647 mA h g(-1) during the 50th cycle at 0.1 A g(-1), which is by far the best for SnS2, suggesting that nanosheet morphology is beneficial to improve cycling stability in addition to rate capability. The SnS2 nanosheets also show encouraging performance in a full cell with a Na3V2(PO4)3 cathode. In addition, the sodium storage mechanism is investigated by ex situ XRD coupled with high-resolution TEM. The high specific capacity, good rate capability, and cycling durability suggest that SnS2 nanosheets have great potential working as anodes for high-performance SIBs.
Publisher: Elsevier BV
Date: 08-2019
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7TA07856K
Abstract: Recent advances in printable secondary batteries and their advantages for powering future wearable smart devices are presented.
Publisher: Elsevier BV
Date: 03-2016
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C5NR04126K
Abstract: In this review, we will be casting light on the recent advances in the synthesis of nanostructured vanadium-based cathodes, such as V 2 O 5 , LiV 3 O 8 , VO 2 (B) and Li 3 V 2 (PO 4 ) 3 .
Publisher: Elsevier BV
Date: 2018
Publisher: American Chemical Society (ACS)
Date: 17-01-2023
DOI: 10.1021/JACS.2C12877
Publisher: Wiley
Date: 23-09-2013
Publisher: Wiley
Date: 27-10-2021
Publisher: Wiley
Date: 22-11-2017
Abstract: Metal-organic frameworks (MOFs) and their derivatives with well-defined structures and compositions show great potential for wide applications such as sensors, catalysis, energy storage, and conversion, etc. However, poor electric conductivity and large volume expansion are main obstacles for their utilization in energy storage, e.g., lithium-ion batteries and supercapacitors. Herein, a facile strategy is proposed for embedding the MOFs, e.g., ZIF-67 and MIL-88 into polyacrylonitrile fibers, which is further used as a template to build a 3D interconnected conductive carbon necklace paper. Owing to the unique structure features of good electric conductivity, interconnected frameworks, electroactive reservoir, and dual dopants, the obtained flexible electrodes with no additives exhibit high specific capacities, good rate capability, and prolonged cycling stability. The hollow dodecahedral ZIF-67 derived carbon necklace paper delivers a high specific capacity of 1200 mAh g
Publisher: American Chemical Society (ACS)
Date: 23-08-2023
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C5TA01739D
Abstract: A unique controlled synthesis of zinc cobalt sulfide nanostructures is obtained by a facile oil phase approach.
Publisher: Royal Society of Chemistry (RSC)
Date: 2021
DOI: 10.1039/D0QM00577K
Abstract: A comprehensive overview of the latest progress of vanadium-based nanomaterials and the challenges and prospects for zinc ion batteries are reviewed.
Publisher: Wiley
Date: 05-06-2015
Abstract: Multifunctional MoS2 @PANI (polyaniline) pseudo-supercapacitor electrodes consisting of MoS2 thin nanosheets and PANI nanoarrays are fabricated via a large-scale approach. The superior capacitance retention is retained up to 91% after 4000 cycles and a high energy density of 106 Wh kg(-1) is delivered at a power density of 106 kW kg(-1) .
Publisher: Wiley
Date: 06-09-2018
Publisher: Wiley
Date: 29-09-2015
Abstract: A 3D hierarchical meso- and macroporous Na3V2(PO4)3-based hybrid cathode with connected Na ion/electron pathways is developed for ultra-fast charge and discharge sodium-ion batteries. It delivers an excellent rate capability (e.g., 86 mA h g(-1) at 100 C) and outstanding cycling stability (e.g., 64% retention after 10,000 cycles at 100 C), indicating its superiority in practical applications.
Publisher: Elsevier BV
Date: 03-2016
Publisher: Wiley
Date: 06-11-2016
Publisher: Springer Science and Business Media LLC
Date: 29-05-2019
Publisher: American Chemical Society (ACS)
Date: 14-10-2013
DOI: 10.1021/AM403572K
Abstract: Ultrathin 2D nanostructures have shown many unique properties and are attractive for various potential applications. Here, we demonstrated a strategy to synthesize ultrathin VOx nanosheets. The as-obtained ultrathin VOx nanosheets showed a large Brunauer-Emmett-Teller (BET) surface area of 136.3 m2 g(-1), which is much larger than that of 1D multilayer VOx nanotubes. As a proof of concept, these hydrophilic ultrathin nanosheets were applied in water treatment and exhibited excellent absorption capability to remove Rhodamine B (RhB) in wastewater owing to their large specific surface area, good hydrophilic property, and more negative zeta potential. In addition, this method could be generalized to prepare other 2D nanostructures with great potential for various attractive applications.
Publisher: Wiley
Date: 29-11-2013
Abstract: Porous, hollow metal carbonate microstructures show many unique properties, and are attractive for various applications. Herein, we report the first demonstration of a general strategy to synthesize hollow metal carbonate structures, including porous MnCO3 hollow cubics, porous CoCO3 hollow rhombuses and porous CaCO3 hollow capsules. For ex le, the porous, hollow MnCO3 microcubes show larger Brunauer-Emmett-Teller (BET) surface areas of 359.5 m(2) g(-1) , which is much larger than that of solid MnCO3 microcubics (i.e., 12.03 m(2) g(-1) ). As a proof of concept, these porous MnCO3 hollow microcubes were applied to water treatment and exhibited an excellent ability to remove organic pollutants in waste water owing to their hollow structure and large specific surface area.
Publisher: Wiley
Date: 27-10-2020
Publisher: Elsevier BV
Date: 10-2017
Publisher: Wiley
Date: 05-04-2019
Abstract: Presented are the theoretical calculation and experimental studies of a Ti 3 C 2 T x MXene‐based nanohybrid with simultaneous Nb doping and surface transition metal alloy modification. Guided by the density functional theory calculation, the Nb doping can move up the Fermi energy level to the conduction band, thus enhancing the electronic conductivity. Meanwhile, the surface modification by Ni/Co alloy can moderate the surface M–H affinity, which will further enhance the hydrogen evolution reaction (HER) activity. A series of Ni/Co alloy attached on Nb‐doped Ti 3 C 2 T x MXene nanohybrids (denoted as NiCo@NTM) are successfully prepared. As expected, the Ni 0.9 Co 0.1 @ NTM nanohybrids present an extraordinary HER activity in alkaline solution, which only needs an overpotential (η) of 43.4 mV to reach the current density of 10 mA cm −2 in 1 m KOH solution and shows good stability. The performance of the Ni 0.9 Co 0.1 @ NTM nanohybrids is comparable to the commercial 10% Pt/C electrode (34.4 mV@10 mA cm −2 ) and is better than most state‐of‐the‐art Pt‐free HER catalysts. Inspired by the facile synthesis process and chemical versatility of both MXene and transition metal alloys, the nanohybrids reported here are promising non‐noble metal electrocatalysts for water–alkali electrolysis.
Publisher: Wiley
Date: 15-01-2014
Abstract: With the increased demand in energy resources, great efforts have been devoted to developing advanced energy storage and conversion systems. Graphene and graphene-based materials have attracted great attention owing to their unique properties of high mechanical flexibility, large surface area, chemical stability, superior electric and thermal conductivities that render them great choices as alternative electrode materials for electrochemical energy storage systems. This Review summarizes the recent progress in graphene and graphene-based materials for four energy storage systems, i.e., lithium-ion batteries, supercapacitors, lithium-sulfur batteries and lithium-air batteries.
Publisher: Wiley
Date: 25-01-2014
Abstract: Ink-jet printing of thermoelectric nanomaterials is successfully used to fabricate flexible thin film TE devices for power generation and cooling.
Location: Netherlands
No related grants have been discovered for Qingyu Yan.