ORCID Profile
0000-0001-9980-8672
Current Organisations
University of Melbourne
,
Saint Vincent's Hospital Melbourne
,
Peter MacCallum Cancer Institute
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
In Research Link Australia (RLA), "Research Topics" refer to ANZSRC FOR and SEO codes. These topics are either sourced from ANZSRC FOR and SEO codes listed in researchers' related grants or generated by a large language model (LLM) based on their publications.
Medical Devices | Biomaterials | Biomedical Engineering |
Manufacturing not elsewhere classified | Expanding Knowledge in the Medical and Health Sciences
Publisher: IOP Publishing
Date: 03-04-2019
Abstract: Reliable and scalable sterilisation of hydrogels is critical to the clinical translation of many biofabrication approaches, such as extrusion-based 3D bioprinting of cell-laden bio-inks. However sterilisation methods can be destructive, and may have detrimental effects on the naturally-derived hydrogels that constitute much of the bio-ink palette. Determining effective sterilisation methods requires detailed analysis of the effects of sterilisation on relevant properties such as viscosity, printability and cytocompatibility. Yet there have been no studies specifically exploring the effects of sterilisation on bio-inks to date. In this work, we explored the effects of various sterilisation techniques on four of the most widely used bio-ink components: gelatin, gelatin methacryloyl, hyaluronic acid, and hyaluronic acid methacrylate. Autoclaving was the most destructive sterilisation method, producing large reductions in viscosity and in mechanical properties following crosslinking. Filter sterilisation caused some reduction in rheological properties of GelMA due to removal of higher molecular weight components, but did not affect photocrosslinking. Ethylene oxide (EtO) was the least destructive sterilisation method in terms of rheological properties for all materials, had no detrimental effect on the photocrosslinkable methacrylate/methacrylamide groups, and so was chosen for more detailed examination. In biological analyses, we found that EtO treatment successfully eradicated a bacterial challenge of E. coli, caused no decrease in viability of human mesenchyman stem cells (hMSCs), and had no effect on their rate of proliferation. Finally, we found that EtO-treated hydrogels supported encapsulated hMSCs to differentiate towards the chondrogenic lineage, and to produce new cartilage matrix. Our results bring to light various effects that sterilisation can have on bio-inks, as well as highlighting EtO sterilisation as a method which minimises degradation of properties, while still promoting biological function.
Publisher: Elsevier BV
Date: 09-2020
Publisher: Hindawi Limited
Date: 2012
DOI: 10.1155/2012/315190
Abstract: Soft-tissue reconstruction following preoperative radiotherapy and wide resection of soft tissue sarcoma remains a challenge. Pedicled and free tissue transfers are an essential part of limb sparing surgery. We report 22 cases of sarcoma treated with radiotherapy and wide excision followed by one-stage innervated free or pedicled musculocutaneous flap transfers. The resection involved the upper limb in 3 cases, the lower limb in 17, and the abdominal wall in 2. The flaps used for the reconstruction were mainly latissimus dorsi and gracilis. The range of motion was restored fully in 14 patients. The muscle strength of the compartment reconstructed was of grades 4 and 5 in all patients except one. The overall function was excellent in all the cases with functional scores of 71.2% in the upper limb and 84% in the lower limb. The only 2 major complications were flap necrosis, both revised with another flap, one of which was innervated with restoration of function. Innervated flaps are valuable alternatives for reconstruction after sarcoma resection in the extremity and in the abdominal wall. The excellent functional results are encouraging, and we believe that innervated muscle reconstruction should be encouraged in the treatment of sarcoma after radiotherapy and wide resection.
Publisher: Hindawi Limited
Date: 25-08-2018
DOI: 10.1002/TERM.2476
Abstract: Articular cartilage injuries experienced at an early age can lead to the development of osteoarthritis later in life. In situ three-dimensional (3D) printing is an exciting and innovative biofabrication technology that enables the surgeon to deliver tissue-engineering techniques at the time and location of need. We have created a hand-held 3D printing device (biopen) that allows the simultaneous coaxial extrusion of bioscaffold and cultured cells directly into the cartilage defect in vivo in a single-session surgery. This pilot study assessed the ability of the biopen to repair a full-thickness chondral defect and the early outcomes in cartilage regeneration, and compared these results with other treatments in a large animal model. A standardized critical-sized full-thickness chondral defect was created in the weight-bearing surface of the lateral and medial condyles of both femurs of six sheep. Each defect was treated with one of the following treatments: (i) hand-held in situ 3D printed bioscaffold using the biopen (HH group), (ii) preconstructed bench-based printed bioscaffolds (BB group), (iii) microfractures (MF group) or (iv) untreated (control, C group). At 8 weeks after surgery, macroscopic, microscopic and biomechanical tests were performed. Surgical 3D bioprinting was performed in all animals without any intra- or postoperative complication. The HH biopen allowed early cartilage regeneration. The results of this study show that real-time, in vivo bioprinting with cells and scaffold is a feasible means of delivering a regenerative medicine strategy in a large animal model to regenerate articular cartilage.
Publisher: Mary Ann Liebert Inc
Date: 08-2014
DOI: 10.1089/TEN.TEA.2013.0657
Abstract: Hyaline cartilage repair is a significant challenge in orthopedics and current techniques result in formation of fibrocartilage. Human infrapatellar fat pad (hIPFP)-derived mesenchymal stem cells (MSCs) are capable of differentiation into multiple tissue lineages, including cartilage and bone. Chondrogenesis is a crucial part of normal skeletal development but the molecular mechanisms are yet to be completely defined. In this study we sourced hIPFP-derived MSCs utilizing chondrogenic growth factors, transforming growth factor beta-3, and bone morphogenetic protein-6, to form hyaline-like cartilage in micromass cultures and we studied chondrogenic development of 7, 14, and 28 days. The purpose of this study was (1) to characterize chondrogenesis from MSCs derived from hIPFP tissue by conventional techniques and (2) to characterize temporal changes of key molecular components during chondrogenesis using microarray gene expression. Endpoints included histology, immunohistochemistry (IHC), gene expression profiles using a microarray technique, and changes in expression of specific genes using quantitative real-time polymerase chain reaction. Over 14-28 days, clusters of encapsulated chondrocytes formed surrounded by collagen type II and aggrecan in the extracellular matrix (ECM). Collagen type II and aggrecan production was confirmed using IHC and chondrogenic lineage markers were studied SRY-related transcription factor (SOX9), collagen type II alpha 1 (COL2A1), and aggrecan gene expression increased significantly over the time course. Normalized microarray highlighted 608 differentially expressed genes 10 chondrogenic genes were upregulated (2- to 87-fold), including COL2A1, COL10A1, COL9A1, COL11A1, COL9A2, COL11A2, COL1A1, COMP, SOX9, and COL3A1. We found that the upregulated genes (twofold or greater) represent significant level of expression (enrichment score) for the ECM structural constituent of the molecular functional at days 7, 14, and 28 during chondrogenesis. Therefore, we have successfully demonstrated in vitro production of hyaline-like cartilage from IPFP-derived MSCs in micromass culture. Microarray has provided information concerning genes involved in chondrogenesis of hIPFP-derived MSCs and our approach offers a viable strategy for generating clinically relevant cartilage for therapeutic use.
Publisher: IOP Publishing
Date: 23-03-2016
Publisher: Ovid Technologies (Wolters Kluwer Health)
Date: 05-2011
Publisher: Wiley
Date: 04-03-2014
DOI: 10.1111/ANS.12108
Abstract: The management of articular cartilage defects remains challenging and controversial. Hyaline cartilage has limited capacity for self-repair and post-injury cartilage is predominantly replaced by fibrocartilage through healing from the subchondral bone. Fibrocartilage lacks the key properties that characterize hyaline cartilage such as capacity for compression, hydrodynamic permeability and smoothness of the articular surface. Many reports relate compromised function associated with repaired cartilage and loss of function of the articular surface. Novel methods have been proposed with the key aim to regenerate hyaline cartilage for repair of osteochondral defects. Over the past decade, with many exciting developments in tissue engineering and regenerative cell-based technologies, we are now able to consider new combinatorial approaches to overcome the problems associated with osteochondral injuries and damage. In this review, the currently accepted surgical approaches are reviewed and considered debridement, marrow stimulation, whole tissue transplantation and cellular repair. More recent products, which employ tissue engineering approaches to enhance the traditional methods of repair, are discussed. Future trends must not only focus on recreating the composition of articular cartilage, but more importantly recapitulate the nano-structure of articular cartilage to improve the functional strength and integration of repair tissue.
Publisher: IOP Publishing
Date: 21-08-2018
Abstract: Cartilage injuries cause pain and loss of function, and if severe may result in osteoarthritis (OA). 3D bioprinting is now a tangible option for the delivery of bioscaffolds capable of regenerating the deficient cartilage tissue. Our team has developed a handheld device, the Biopen, to allow in situ additive manufacturing during surgery. Given its ability to extrude in a core/shell manner, the Biopen can preserve cell viability during the biofabrication process, and it is currently the only biofabrication tool tested as a surgical instrument in a sheep model using homologous stem cells. As a necessary step toward the development of a clinically relevant protocol, we aimed to demonstrate that our handheld extrusion device can successfully be used for the biofabrication of human cartilage. Therefore, this study is a required step for the development of a surgical treatment in human patients. In this work we specifically used human adipose derived mesenchymal stem cells (hADSCs), harvested from the infra-patellar fat pad of donor patients affected by OA, to also prove that they can be utilized as the source of cells for the future clinical application. With the Biopen, we generated bioscaffolds made of hADSCs laden in gelatin methacrylate, hyaluronic acid methacrylate and cultured in the presence of chondrogenic stimuli for eight weeks in vitro. A comprehensive characterisation including gene and protein expression analyses, immunohistology, confocal microscopy, second harmonic generation, light sheet imaging, atomic force mycroscopy and mechanical unconfined compression demonstrated that our strategy resulted in human hyaline-like cartilage formation. Our in situ biofabrication approach represents an innovation with important implications for customizing cartilage repair in patients with cartilage injuries and OA.
Publisher: Elsevier BV
Date: 07-2012
Publisher: Ovid Technologies (Wolters Kluwer Health)
Date: 02-2008
Publisher: MDPI AG
Date: 17-11-2021
Abstract: Osteochondral (OC) defects are debilitating joint injuries characterized by the loss of full thickness articular cartilage along with the underlying calcified cartilage through to the subchondral bone. While current surgical treatments can provide some relief from pain, none can fully repair all the components of the OC unit and restore its native function. Engineering OC tissue is challenging due to the presence of the three distinct tissue regions. Recent advances in additive manufacturing provide unprecedented control over the internal microstructure of bioscaffolds, the patterning of growth factors and the encapsulation of potentially regenerative cells. These developments are ushering in a new paradigm of ‘multiphasic’ scaffold designs in which the optimal micro-environment for each tissue region is in idually crafted. Although the adoption of these techniques provides new opportunities in OC research, it also introduces challenges, such as creating tissue interfaces, integrating multiple fabrication techniques and co-culturing different cells within the same construct. This review captures the considerations and capabilities in developing 3D printed OC scaffolds, including materials, fabrication techniques, mechanical function, biological components and design.
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C7SM02187A
Abstract: Strategies for controlling the properties of gelatin methacryloyl hydrogels are elucidated, with applications for biofabrication and tissue engineering.
Publisher: Springer Science and Business Media LLC
Date: 04-2008
DOI: 10.1007/S12306-007-0023-2
Abstract: One of the most common complications of cemented prostheses is aseptic loosening of the implant, which is often due to mechanical breakdown at the bone-cement interface. To improve the characteristics of PMMA, the addition of fluoride has been proposed, which, without jeopardising its mechanical qualities, should provide better integration with the surrounding bone. An experimental study was performed in 4 sheep. A cylinder of cement (with and without fluoride) was inserted in the meta-epiphysis of the distal femur. A clinical study followed 7 patients. The cement with added fluoride was used as a filler after the curettage of a benign tumour located in the meta-epiphysis around the knee. Histological results in animals combined with long-term radiographic results in humans have shown the positive influence of fluoride in the cement, as it allows better integration of the cement with the surrounding bone.
Publisher: Future Medicine Ltd
Date: 05-2013
DOI: 10.2217/RME.13.28
Abstract: The treatment of cartilage defects poses a clinical challenge owing to the lack of intrinsic regenerative capacity of cartilage. The use of tissue engineering techniques to bioengineer articular cartilage is promising and may hold the key to the successful regeneration of cartilage tissue. Natural and synthetic biomaterials have been used to recreate the microarchitecture of articular cartilage through multilayered biomimetic scaffolds. Acellular scaffolds preserve the microarchitecture of articular cartilage through a process of decellularization of biological tissue. Although promising, this technique often results in poor biomechanical strength of the graft. However, biomechanical strength could be improved if biomaterials could be incorporated back into the decellularized tissue to overcome this limitation.
Publisher: Wiley
Date: 02-08-2016
DOI: 10.1111/ANS.13251
Abstract: Bone and soft-tissue sarcomas are rare and heterogeneous malignancies arising from tissues of mesenchymal origin. Treatment planning is informed by accurate diagnosis for which biopsy is the diagnostic standard. Biopsy in the setting of suspected malignancy is a technically challenging procedure that should only be performed at specialist institutions. Without the requisite expertise, they can compromise the viability of reconstructive procedures and may make necessary utation to achieve adequate surgical margins. The risk of complications arising from the procedure must be minimized and therefore biopsy should always be preceded by imaging. There must be no attempt at biopsy or excision prior to referral if there is any suspicion of malignancy. Patients with suspected bone and soft-tissue tumours are best evaluated and treated at specialist sarcoma centres under the care of expert multidisciplinary teams. Prompt referral to a specialist sarcoma centre should always be made prior to biopsy for any suspicious mass that is painful, progressively increasing in size, greater than 5 cm in diameter, deep to deep fascia or recurs following inadvertent excision.
Publisher: Ovid Technologies (Wolters Kluwer Health)
Date: 06-2013
DOI: 10.2106/JBJS.L.00429
Publisher: Mary Ann Liebert Inc
Date: 09-2010
DOI: 10.1089/TEN.TEA.2009.0637
Abstract: Limited incorporation and modest bone remodeling can cause allograft failure. We investigated whether mesenchymal stem cells (MSCs) and osteogenic protein-1 (OP-1) can improve allograft integration. A 3-cm full-size intercalary bone defect was created in the mid-diaphysis of the metatarsal bone of the sheep and it was replaced with an allograft alone (control group), or with MSCs (MSC group), OP-1 (OP-1 group), or MSCs and OP-1 (MSC + OP-1 group). Radiographic results showed a faster and complete integration of the allograft in the MSC + OP-1 group. Histology demonstrated that the amount of new bone was significantly greater inside the graft and a longer vessel penetration in the MSC + OP-1 group than in others. Mechanical strength of the allograft was not compromised by the high rate of bone remodeling. These results demonstrated that the association of MSCs and OP-1 improve bone allograft integration promoting an almost complete bone restoring.
Publisher: Springer Science and Business Media LLC
Date: 27-09-2017
DOI: 10.1007/S10856-017-5979-3
Abstract: Trilayered polypyrrole (PPy) actuators have high stress density, low modulus and have wide potential biological applications including use in artificial muscles and in limb prosthesis after limb utation. This article examines the in vivo biocompatibility of actuators in muscle using rabbit models. The actuators were specially designed with pores to encourage tissue in growth this study also assessed the effect of such pores on the stability of the actuators in vivo. Trilayered PPy actuators were either laser cut with 150 µm pores or left pore-less and implanted into rabbit muscle for 3 days, 2 weeks, 4 weeks and 8 weeks and retrieved subsequently for histological analysis. In a second set of experiments, the cut edges of pores in porous actuator strips were further sealed by PPy after laser cutting to further improve its stability in vivo. Porous actuators with and without PPy sealing of pore edges were implanted intramuscularly for 4 and 8 weeks and assessed with histology. Pore-less actuators incited a mild inflammatory response, becoming progressively walled off by a thin layer of fibrous tissue. Porous actuators showed increased PPy fragmentation and delamination with associated greater foreign body response compared to pore-less actuators. The PPy fragmentation was minimized when the pore edges were sealed off by PPy after laser cutting showing less PPy debris. Laser cutting of the actuators with pores destabilizes the PPy. This can be overcome by sealing the cut edges of the pores with PPy after laser. The findings in this article have implications in future design and manufacturing of PPy actuator for use in vivo.
Publisher: Springer Science and Business Media LLC
Date: 06-02-2011
DOI: 10.1007/S00256-011-1096-4
Abstract: Ewing sarcoma (ES) and osteosarcoma (OS) have different biological characteristics and respond differently to chemotherapy. We reviewed (18)F-FDG PET imaging characteristics of ES and OS patients at baseline and following treatment to determine whether this biological variation is reflected in their imaging phenotype. A retrospective review of ES and OS patients treated with neoadjuvant chemotherapy and surgery was done, correlating PET results with histologic response to chemotherapy. Change in the maximum standardized uptake value (SUVmax) between baseline and post-treatment scanning was not significantly associated with histologic response for either ES or OS. Metabolic tumor volume (MTV) and the percentage of injected (18)F-FDG dose (%ID) in the primary tumor were found to be different for ES and OS response subgroups. A 50% reduction in MTV (MTV2:1 < 0.5) was found to be significantly associated with favorable histologic response in OS. Using the same criteria for ES incorrectly predicted good responders. Increasing the cut-off values for ES to a 90% reduction in MTV (MTV2:1 < 0.1) resulted in association with favorable histologic response. Response to neoadjuvant chemotherapy as reflected by changes in PET characteristics should be interpreted differently for ES and OS.
Publisher: MDPI AG
Date: 18-01-2021
Abstract: Degradable bone implants are designed to foster the complete regeneration of natural tissue after large-scale loss trauma. Polycaprolactone (PCL) and hydroxyapatite (HA) composites are promising scaffold materials with superior mechanical and osteoinductive properties compared to the single materials. However, producing three-dimensional (3D) structures with high HA content as well as tuneable degradability remains a challenge. To address this issue and create homogeneously distributed PCL-nanoHA (nHA) scaffolds with tuneable degradation rates through both PCL molecular weight and nHA concentration, we conducted a detailed characterisation and comparison of a range of PCL-nHA composites across three molecular weight PCLs (14, 45, and 80 kDa) and with nHA content up to 30% w/w. In general, the addition of nHA results in an increase of viscosity for the PCL-nHA composites but has little effect on their compressive modulus. Importantly, we observe that the addition of nHA increases the rate of degradation compared to PCL alone. We show that the 45 and 80 kDa PCL-nHA groups can be fabricated via indirect 3D printing and have homogenously distributed nHA even after fabrication. Finally, the cytocompatibility of the composite materials is evaluated for the 45 and 80 kDa groups, with the results showing no significant change in cell number compared to the control. In conclusion, our analyses unveil several features that are crucial for processing the composite material into a tissue engineered implant.
Publisher: Springer Science and Business Media LLC
Date: 19-07-2017
DOI: 10.1038/S41598-017-05699-X
Abstract: Three-dimensional (3D) bioprinting is driving major innovations in the area of cartilage tissue engineering. Extrusion-based 3D bioprinting necessitates a phase change from a liquid bioink to a semi-solid crosslinked network achieved by a photo-initiated free radical polymerization reaction that is known to be cytotoxic. Therefore, the choice of the photocuring conditions has to be carefully addressed to generate a structure stiff enough to withstand the forces phisiologically applied on articular cartilage, while ensuring adequate cell survival for functional chondral repair. We recently developed a handheld 3D printer called “Biopen”. To progress towards translating this freeform biofabrication tool into clinical practice, we aimed to define the ideal bioprinting conditions that would deliver a scaffold with high cell viability and structural stiffness relevant for chondral repair. To fulfill those criteria, free radical cytotoxicity was confined by a co-axial Core/Shell separation. This system allowed the generation of Core/Shell GelMa/HAMa bioscaffolds with stiffness of 200KPa, achieved after only 10 seconds of exposure to 700 mW/cm 2 of 365 nm UV-A, containing % viable stem cells that retained proliferative capacity. Overall, the Core/Shell handheld 3D bioprinting strategy enabled rapid generation of high modulus bioscaffolds with high cell viability, with potential for in situ surgical cartilage engineering.
Publisher: Ovid Technologies (Wolters Kluwer Health)
Date: 06-2005
DOI: 10.1097/01.BLO.0000165736.87628.12
Abstract: Early vascular invasion is a key factor in bone allograft incorporation. It may reduce the complications related to slow and incomplete bone integration. Bone-marrow-derived stromal stem cells associated with platelet-rich plasma are potent angiogenic inducers proven to release vascular endothelial growth factor. Our goal was to test whether the combination of stromal stem cells and platelet-rich plasma is able to increase massive allograft integration in a large animal model with sacrifice at 4 months. A critical defect was made in the mid-diaphysis of the metatarsal bone of 10 sheep the study group received an allograft plus stromal stem cells, platelet-rich plasma, and collagen (six animals) and the control group received only the allograft (four animals). Investigation was done with radiographs, mechanical tests and histomorphometric analysis, including new vascularization. Results showed substantial new bone formation in the allograft of the study group. Bone formation is correlated with better vascular invasion and remodeling of the graft in the study group. These results confirm the key role played by stromal stem cells and platelet-rich plasma in bone repair. Further studies are needed to better define the role stromal stem cells play when implanted alone.
Publisher: Elsevier BV
Date: 10-2005
Publisher: Hindawi Limited
Date: 2018
DOI: 10.1155/2018/8947548
Abstract: Mesenchymal stem cells (MSCs) have shown much promise with respect to their use in cartilage tissue engineering. MSCs can be obtained from many different tissue sources. Among these, adipose tissue can provide an abundant source of adipose-derived mesenchymal stem cells (ADMSCs). The infrapatellar fat pad (IFP) is a promising source of ADMSCs with respect to producing a cartilage lineage. Cell isolation protocols to date are time-consuming and follow conservative approaches that rely on a long incubation period of 24–48 hours. The different types of ADMSC isolation techniques used for cartilage repair will be reviewed and compared with the view of developing a rapid one-step isolation protocol that can be applied in the context of a surgical procedure.
Publisher: Wiley
Date: 31-01-2011
DOI: 10.1002/JOR.21333
Abstract: The objective of this study was to evaluate whether mesenchymal stem cells (MSC) and platelet lysate (PL) seeded in a fibrin or collagen scaffold could improve the new bone (NB) formation around an uncemented hip prosthesis stem in a sheep model. In vitro expanded MSC were suspended in PL and either mixed with collagen or fibrin gel as delivery vehicle. The cell-gel composites were inserted inside the femoral canal, then the prosthesis was press-fit inserted inside the femur. Identical procedures were performed in a control group, but only the prosthesis was implanted. Histomorphometrical analysis performed 4 months after surgery indicated that the newly formed bone inside the medullary canal, between the inner cortex and the prosthetic stem, was significantly higher in the MSC-PL-collagen group (mean 18.7 ± 4.5%) and in the MSC-PL-fibrin group (mean 18.8 ± 15.2%) when compared to the control group (mean 4.6 ± 2.0%). There was a significantly higher bone-prosthesis contact in the MSC-PL-collagen group (mean 2.7 ± 2.6%) and in the MSC-PL-fibrin group (mean 2.3 ± 3.1%) compared to the control group (mean 0.2 ± 0.1%). The results indicate that MSC and PL in a fibrin or collagen scaffold can promote NB formation around an uncemented hip prosthesis stem.
Publisher: Mary Ann Liebert Inc
Date: 04-2008
Abstract: Repair of substantial cranial defects in adults and children may be compromised due to limitations in donor bone stocks for autologous grafts. We evaluated the capability of autologous adipose-derived mesenchymal cells (ADCs) in combination with polylactic acid (PLA) scaffolds to regenerate bone in a critical-sized skull defect. Thirty adult New Zealand White rabbits were ided into six groups of five animals each: (1) PLA alone (control), (2) fibronectin-coated PLA, (3) PLA with ADCs, (4) fibronectin-coated PLA with ADCs, (5) PLA with osteogenically induced ADCs (osADCs), and (6) fibronectin-coated PLA with osADCs. All the animals were humanely killed after 6 weeks. X-ray, histology, and histomorphometric analysis were performed to evaluate the new bone formation inside the PLA scaffold. Radiographically and histomorphometrically, the groups in which the PLA was not fibronectin coated showed no bone formation in contrast to the fibronectin-coated groups (Gp1 vs. Gp2, p < 0.0005) the group treated with osteo-induced ADCs and fibronectin (Gp6) showed significantly more bone formation than the group treated with undifferentiated ADCs (Gp4) and the group treated without cells (Gp5, p < 0.0005, in both cases). These data indicate that the surface treatment with fibronectin promotes bone formation within the scaffold, and that autologous, osteo-induced adipose-derived cells enhance bone formation if seeded into a fibronectin-treated PLA scaffold.
Publisher: Wiley
Date: 03-2020
DOI: 10.1111/ANS.15713
Publisher: British Editorial Society of Bone & Joint Surgery
Date: 11-2005
DOI: 10.1302/0301-620X.87B11.16621
Abstract: We reviewed 124 patients with a conventional pelvic chondrosarcoma who had been treated over a period of 20 years. We recorded the type of tumour (central or peripheral), type of operation (limb salvage surgery or hemipelvectomy), the grade of tumour, local recurrence and/or metastases, in order to identify the factors which might influence survival. More satisfactory surgical margins were achieved for central tumours or in those patients treated by hemipelvectomy. However, grade 1 tumours, whatever the course, did not develope metastases or cause death, while grade 3 tumours had the worst outcome and prognosis. Central, high-grade tumours require aggressive surgical treatment in order to achieve adequate surgical margins, particularly in those lesions located close to the sacroiliac joint. By contrast, grade 1 peripheral chondrosarcomas may be treated with contaminated margins in order to reduce operative morbidity, but without reducing survival.
Publisher: Wiley
Date: 22-11-2022
Abstract: Human articular cartilage has a poor ability to self‐repair, meaning small injuries often lead to osteoarthritis, a painful and debilitating condition which is a major contributor to the global burden of disease. Existing clinical strategies generally do not regenerate hyaline type cartilage, motivating research toward tissue engineering solutions. Prospective cartilage tissue engineering therapies can be placed into two broad categories: i) Ex situ strategies, where cartilage tissue constructs are engineered in the lab prior to implantation and ii) in situ strategies, where cells and/or a bioscaffold are delivered to the defect site to stimulate chondral repair directly. While commonalities exist between these two approaches, the core point of distinction—whether chondrogenesis primarily occurs “within” or “without” (outside) the body—can dictate many aspects of the treatment. This difference influences decisions around cell selection, the biomaterials formulation and the surgical implantation procedure, the processes of tissue integration and maturation, as well as, the prospects for regulatory clearance and clinical translation. Here, ex situ and in situ cartilage engineering strategies are compared: Highlighting their respective challenges, opportunities, and prospects on their translational pathways toward long term human cartilage repair.
Publisher: Wiley
Date: 26-08-2014
DOI: 10.1111/ANS.12756
Publisher: Elsevier BV
Date: 07-2022
DOI: 10.1016/J.ACTBIO.2022.05.037
Abstract: In this work we present a standardised quantitative ultrasound imaging (SQUI) approach for the non-destructive three-dimensional imaging and quantification of cartilage formation in hydrogel based bioscaffolds. The standardised concept involves the processing of ultrasound backscatter data with respect to an acellular phantom in combination with the compensation of sound speed mismatch diffraction effects between the bioscaffold and the phantom. As a proof-of-concept, the SQUI approach was tested on a variety of bioscaffolds with varying degree of neocartilage formation. These were composed of Gelatine Methacryloyl (GelMA) hydrogels laden with human adipose-derived stem cells (hADSCs). These were cultured under chondrogenic stimulation following a previously established protocol, where the degree of the neocartilage formation was modulated using different GelMA network densities (6, 8, 10 % w/v) and culture time (0, 14, 28 days). Using the SQUI approach we were able to detect marked acoustic and morphological changes occurring in the bioscaffolds a result of their different chondrogenic outcome. We defined an acoustic neocartilage indicator, the sonomarker, for the selective imaging and quantification of neocartilage formation. The sonomarker, of backscatter intensity logIBC -2.4, was found to correlate with data obtained via standard destructive bioassays. The ultrasonic evaluation of human specimens confirmed the sonomarker as a relevant intensity, although it was found to shift to higher intensity values in proportion to the cartilage condition as inferred from sound speed measurements. This study demonstrates the potential of the SQUI approach for the realization of non-destructive analysis of cartilage regeneration over-time. STATEMENT OF SIGNIFICANCE: As tissue engineering strategies for neocartilage regeneration evolve towards clinical implementation, alternative characterisation approaches that allow the non-destructive monitoring of extracellular matrix formation in implantable hydrogel based bioscaffolds are needed. In this work we present an innovative standardized quantitative ultrasound imaging (SQUI) approach that allows the non-destructive, volumetric, and quantitative evaluation of neocartilage formation in hydrogel based bioscaffolds. The standardised concept aims to provide a robust approach that accounts for the dynamic changes occurring during the conversion from a cellular bioscaffold towards the formation of a neocartilage construct. We believe that the SQUI approach will be of great benefit for the evaluation of constructs developing neocartilage, not only for in-vitro applications but also potentially applicable to in-vivo applications.
Publisher: Ovid Technologies (Wolters Kluwer Health)
Date: 11-2010
Publisher: Ovid Technologies (Wolters Kluwer Health)
Date: 02-2010
Publisher: MDPI AG
Date: 20-02-2019
DOI: 10.3390/MA12040640
Abstract: Cartilage defects and diseases remain major clinical issues in orthopaedics. Biomanufacturing is now a tangible option for the delivery of bioscaffolds capable of regenerating the deficient cartilage tissue. However, several limitations of in vitro and experimental animal models pose serious challenges to the translation of preclinical findings into clinical practice. Ex vivo models are of great value for translating in vitro tissue engineered approaches into clinically relevant conditions. Our aim is to obtain a viable human osteochondral (OC) model to test hydrogel-based materials for cartilage repair. Here we describe a detailed step-by-step framework for the generation of human OC plugs, their culture in a perfusion device and the processing procedures for histological and advanced microscopy imaging. Our ex vivo OC model fulfils the following requirements: the model is metabolically stable for a relevant culture period of 4 weeks in a perfusion bioreactor, the processing procedures allowed for the analysis of 3 different tissues or materials (cartilage, bone and hydrogel) without compromising their integrity. We determined a protocol and the settings for a non-linear microscopy technique on label free sections. Furthermore, we established a clearing protocol to perform light sheet-based observations on the cartilage layer without the need for tedious and destructive histological procedures. Finally, we showed that our OC system is a clinically relevant in terms of cartilage regeneration potential. In conclusion, this OC model represents a valuable preclinical ex vivo tool for studying cartilage therapies, such as hydrogel-based bioscaffolds, and we envision it will reduce the number of animals needed for in vivo testing.
Publisher: Elsevier BV
Date: 06-2023
Publisher: Elsevier BV
Date: 2021
Publisher: Wiley
Date: 2007
DOI: 10.1002/JSO.20752
Abstract: Due to possible complication and loss of function, surgery is not often indicated in pelvic Ewing's sarcoma (ES). The purpose of this study was to review our experience and evaluate the role of different local treatment in non-metastatic pelvic ES patients. One hundred twenty-nine patients with pelvic ES were treated at our institution between 1975 and 1999. We excluded patients presenting metastases, patients who had died of other causes, or those with incomplete clinical documentation. Among the 73 eligible patients, 17 (23%) with progression of tumor growth during induction chemotherapy eventually died. The analysis was focused on the remaining 56 patients with good or stable clinical response to the chemotherapy. Patients treated with surgery, with or without radiation therapy, had a better local control (82.6% vs. 66.7%) and a significantly higher rate of 5-year EFS (73.9% vs. 30.3%, P = 0.036) than those who were only treated with local radiation therapy. Chemotherapy is the key factor in the treatment of pelvic ES. In our series, surgical treatment was associated with good prognosis for pelvic ES. The use of radiotherapy alone was less effective and should be only used in non-operable patients. Radiotherapy after surgery as a rescue method might not act effectively, while preoperative radiotherapy was associated with good clinical response and should be recommended.
Location: Italy
Start Date: 2016
End Date: 2019
Funder: Australian Research Council
View Funded ActivityStart Date: 03-2017
End Date: 09-2021
Amount: $3,722,989.00
Funder: Australian Research Council
View Funded Activity