ORCID Profile
0000-0002-9247-7353
Current Organisations
University of Sydney
,
King Abdulaziz City for Science And Technology
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Elsevier BV
Date: 02-2019
Publisher: MDPI AG
Date: 23-03-2021
DOI: 10.3390/SU13063542
Abstract: The building and construction sector has a huge impact on the environment because of the enormous amounts of natural resources and energy consumed during the life cycle of construction projects. In this study, we evaluated the potential environmental impact of the construction of a villa, from cradle to grave, in the Saudi Arabian context. Centrum voor Milieukunde Leiden (CML) for Centre of Environmental Science of Leiden University-IA baseline v3.03 methods were used to obtain the environmental profile for the impact categories, and Cumulative Energy Demand v1.09 was used to measure the embodied energy of the villa life cycle. The analyzed midpoint impact categories include global warming (GWP100a), ozone layer depletion (ODP), acidification (AP), eutrophication (EP), photochemical oxidation (POCP), and indicator cumulative energy demand (CED). The operation use phase of the villa was found to have the highest global warming potential and acidification with 2.61 × 106 kg CO2-eq and 1.75 × 104 kg SO2-eq, respectively. Sensitivity analysis was performed on the Saudi Arabian plans to increase the share of renewable sources and reduce the amount of electricity generated from hydrocarbons, which currently represents 46% of the total installed power, by 2032. The results showed that compared with the current electricity environmental impact, the CO2 emission from electricity will decrease by 53%, which represents a significant reduction in environmental impact. The findings will help with the life cycle assessment of structures during future planning and for energy conservation.
Publisher: MDPI AG
Date: 18-01-2023
DOI: 10.3390/MA16030930
Abstract: The present work investigates the formation and microstructural and micro-mechanical characterization of the recast layer that formed on Inconel 718 alloy in the course of the wire electro-discharge machining (WEDM). The as-machined surface contains globules, shallow cracks, and re-deposition of molten materials, together with the elements from the decomposition of wire electrode and electrolyte, which does not exceed beyond the surface of the recast layer. Under presently investigated machining parameters, the recast layer was about 6.2 ± 2.1 µm thick. There was no presence of a heat-affected zone (HAZ), as otherwise indicated for other hard-to-cut materials. The transmission electron microscopy (TEM) and electron back-scattered diffraction (EBSD) investigations show that the microstructure of the recast layer is similar to that of bulk alloy. Micro-mechanical characterizations of the recast layer were investigated via in-situ micro-pillar compression on the micro-pillars fabricated on the recast layer. The strength of the superficial layer (1151.6 ± 51.1 MPa) was about 2.2 times higher than that of the base material (523.2 ± 22.1 MPa), as revealed by the in-situ micro-pillar compression.
Publisher: Elsevier BV
Date: 12-2020
Publisher: MDPI AG
Date: 31-12-2018
DOI: 10.3390/LUBRICANTS7010002
Abstract: High-performance polymer (HPP)-based engineering materials in tribological applications have been under continuous research over the last few decades. This paper reviewed the recent studies on the sliding wear properties of HPPs and their nanocomposites, which are associated with the intrinsic and extrinsic parameters. In particular, the effects of the intrinsic properties of polymer composites (e.g., mechanical properties of the materials and the types of fillers) and external environmental conditions (e.g., service temperature and lubrication medium) on the formation of transfer layers (TLs) were discussed. The latter would govern the overall friction and wear of polymeric materials in sliding against metallic counterparts. In addition, correlations between the basic mechanical properties of HPPs and their sliding wear behavior were also explored.
Publisher: Springer Science and Business Media LLC
Date: 18-03-2023
Publisher: Elsevier BV
Date: 12-2018
Publisher: MDPI AG
Date: 07-08-2020
DOI: 10.3390/MA13163489
Abstract: To simulate today’s complex tribo-contact scenarios, a methodological breakdown of a complex design problem into simpler sub-problems is essential to achieve acceptable simulation outcomes. This also helps to manage iterative, hierarchical systems within given computational power. In this paper, the authors reviewed recent trends of simulation practices in tribology to model tribo-contact scenario and life cycle assessment (LCA) with the help of simulation. With the advancement of modern computers and computing power, increasing effort has been given towards simulation, which not only saves time and resources but also provides meaningful results. Having said that, like every other technique, simulation has some inherent limitations which need to be considered during practice. Keeping this in mind, the pros and cons of both physical experiments and simulation approaches are reviewed together with their interdependency and how one approach can benefit the other. Various simulation techniques are outlined with a focus on machine learning which will dominate simulation approaches in the future. In addition, simulation of tribo-contacts across different length scales and lubrication conditions is discussed in detail. An extension of the simulation approach, together with experimental data, can lead towards LCA of components which will provide us with a better understanding of the efficient usage of limited resources and conservation of both energy and resources.
Publisher: Springer Science and Business Media LLC
Date: 12-05-2022
Publisher: MDPI AG
Date: 15-09-2021
DOI: 10.3390/MA14185328
Abstract: Phase change materials (PCMs) are an effective thermal mass and their integration into the structure of a building can reduce the ongoing costs of building operation, such as daily heating/cooling. PCMs as a thermal mass can absorb and retard heat loss to the building interior, maintaining comfort in the building. Although a large number of PCMs have been reported in the literature, only a handful of them, with their respective advantages and disadvantages, are suitable for building wall construction. Based on the information available in the literature, a critical evaluation of PCMs was performed in this paper, focusing on two aspects: (i) PCMs for building wall applications and (ii) the inclusion of PCMs in building wall applications. Four different PCMs, namely paraffin wax, fatty acids, hydrated salts, and butyl stearate, were identified as being the most suitable for building wall applications and these are explained in detail in terms of their physical and thermal properties. Although there are several PCM encapsulation techniques, the direct application of PCM in concrete admixtures is the most economical method to keep costs within manageable limits. However, care should be taken to ensure that PCM does not leak or drip from the building wall.
Publisher: MDPI AG
Date: 30-08-2023
DOI: 10.3390/MA16175933
Abstract: Additive manufacturing (AM) of stainless steel is more difficult than other metallic materials, as the major alloying elements of the stainless steel are prone to oxidation during the fabrication process. In the current work, specimens of the stainless steel 316L were made by the powder laser bed fusion (P-LBF) additive manufacturing process. These specimens were investigated by electron microscopy and micro-/nano-indentation techniques to investigate the microstructural aspects and the mechanical properties, respectively. Compositionally, a similar wrought stainless steel was subjected to identical investigation, and used as a benchmark material. The microstructure of the P-LBF-processed alloy shows both equiaxed and elongated grains, which are marginally smaller (3.2–3.4 μm) than that of the wrought counterpart (3.6 μm). Withstanding such marginal gain size refinement, the increase in shear stress and hardness of the L-PBF alloy was striking. The L-PBF-processed alloy possess about 1.92–2.12 GPa of hardness, which was about 1.5 times higher than that of wrought alloy (1.30 GPa), and about 1.15 times more resistant against plastic flow of material. Similarly, L-PBF-processed alloy possess higher maximum shear stress (274.5–294.4 MPa) than that of the wrought alloy (175.9 MPa).
Publisher: MDPI AG
Date: 11-10-2021
DOI: 10.3390/MET11101611
Abstract: In this study, the mechanical properties and deformation features of Zr-based bulk metallic glass (BMG) are investigated at micro-scale via in situ micro-pillar compression. Furthermore, the effects of the strain rate and micro-pillar diameter on respective stress–strain curves are investigated. Together with the mechanical properties, such unique in situ micro-pillar compression techniques provide physical status to the micro-pillars, referring to the instances of stress–strain curves. It is noted that the effect of the strain rate on the stress–strain behaviour of the BMG diminishes with increasing micro-pillar diameter. In contrast, yield and ultimate compressive strength increase with increasing micro-pillar diameter, up to 4 µm. The deformation details after compression, as a result of conformed mechanical loading, are analysed by SEM and TEM. As evident from electron microscopy investigation, the plastic deformation is evidenced by the presence of multiple slip/shear bands, acting as load accommodation mechanisms in the course of mechanical loading together and resemble local plastic flow (ductile in nature) between two shear plans.
Publisher: MDPI AG
Date: 16-03-2023
DOI: 10.3390/MA16062383
Abstract: Additive manufacturing (AM) of Ni-based super alloys is more challenging, compared to the production other metallic alloys. This is due to their high melting point and excellent high temperature resistance. In the present work, an Inconel 718 alloy was fabricated by a powder laser bed fusion (P-LBF) process and investigated to assess its microstructural evolution, together with mechanical properties. Additionally, the alloy was compared against the cast (and forged) alloy of similar composition. The microstructure of the P-LBF-processed alloy shows hierarchy microstructure that consists of cellular sub-structure (~100–600 nm), together with melt pool and grain boundaries, in contrast of the twin infested larger grain microstructure of the cast alloy. However, the effect of such unique microstructure on mechanical properties of the L-PBF alloy was overwritten, due to the absence of precipitates. The hardness of the L-PBF-processed alloy (330–349 MPa) was lower than that of cast alloy (408 MPa). The similar trend was also observed in other mechanical properties, such as Young’s modulus, resistance to plasticity and shear stress.
Publisher: Elsevier BV
Date: 2018
Publisher: Elsevier BV
Date: 11-2023
Location: Saudi Arabia
No related grants have been discovered for Abdulaziz Kurdi.