ORCID Profile
0000-0002-6975-7787
Current Organisation
Nanyang Technological University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Wiley
Date: 05-01-2012
Abstract: A simple approach is developed to identify the layer number of 2D MoS₂ sheets. By using an optical imaging method combined with image analysis software, a high-contrast image of the MoS₂ sheets can be extracted from the red (R) channel of the color optical microscopy image. The value of the intensity difference in the grayscale image of the R channel between MoS₂ sheets (1-3 layers) and the SiO₂ substrate can be used to identify the layer number of the sheet.
Publisher: Wiley
Date: 15-04-2011
Abstract: The chemical reaction between Ag nanoparticles (Ag NPs) and 7,7',8,8'- tetracycanoquinodimethane (TCNQ) microparticles (MPs) in aqueous solution for the formation of Ag-NP-decorated Ag-TCNQ nanowires is reported. Based on the results obtained by UV-vis spectroscopy and scanning electron microscopy (SEM), it is proposed that the reaction between Ag NPs and TCNQ MPs includes three stages, namely, aggregation of NPs and MPs, diffusion and reaction between NPs and MPs, and formation of Ag-TCNQ nanowires. The as-synthesized semiconducting Ag-TCNQ nanowires show good performance in nonvolatile memory devices with multiple write-read-erase-read (WRER) cycles in air.
Publisher: Wiley
Date: 21-03-2012
Publisher: American Chemical Society (ACS)
Date: 21-12-2011
DOI: 10.1021/NN2024557
Abstract: A new phototransistor based on the mechanically exfoliated single-layer MoS(2) nanosheet is fabricated, and its light-induced electric properties are investigated in detail. Photocurrent generated from the phototransistor is solely determined by the illuminated optical power at a constant drain or gate voltage. The switching behavior of photocurrent generation and annihilation can be completely finished within ca. 50 ms, and it shows good stability. Especially, the single-layer MoS(2) phototransistor exhibits a better photoresponsivity as compared with the graphene-based device. The unique characteristics of incident-light control, prompt photoswitching, and good photoresponsivity from the MoS(2) phototransistor pave an avenue to develop the single-layer semiconducting materials for multifunctional optoelectronic device applications in the future.
Publisher: American Chemical Society (ACS)
Date: 29-04-2010
DOI: 10.1021/JA102154B
Abstract: Through the use of preformed tetrathiafulvalene (TTF) particles and 7,7',8,8'-tetracyanoquinodimethane (TCNQ) microstructures as starting materials, the postchemistry of organic particles has been demonstrated for the first time in aqueous solution. The as-synthesized TTF-TCNQ nanowires show stable performance in organic nonvolatile memory devices with multiple write-read-erase-read cycles in air.
Publisher: Wiley
Date: 20-10-2011
Abstract: Single- and multilayer MoS(2) films are deposited onto Si/SiO(2) using the mechanical exfoliation technique. The films were then used for the fabrication of field-effect transistors (FETs). These FET devices can be used as gas sensors to detect nitrous oxide (NO). Although the single-layer MoS(2) device shows a rapid response after exposure to NO, the current was found to be unstable. The two-, three-, and four-layer MoS(2) devices show both stable and sensitive responses to NO down to a concentration of 0.8 ppm.
Publisher: Springer Science and Business Media LLC
Date: 31-03-2021
DOI: 10.1038/S41467-021-22250-9
Abstract: Despite the tremendous progress of coupling organic electrooxidation with hydrogen generation in a hybrid electrolysis, electroreforming of raw biomass coupled to green hydrogen generation has not been reported yet due to the rigid polymeric structures of raw biomass. Herein, we electrooxidize the most abundant natural amino biopolymer chitin to acetate with over 90% yield in hybrid electrolysis. The overall energy consumption of electrolysis can be reduced by 15% due to the thermodynamically and kinetically more favorable chitin oxidation over water oxidation. In obvious contrast to small organics as the anodic reactant, the abundance of chitin endows the new oxidation reaction excellent scalability. A solar-driven electroreforming of chitin and chitin-containing shrimp shell waste is coupled to safe green hydrogen production thanks to the liquid anodic product and suppression of oxygen evolution. Our work thus demonstrates a scalable and safe process for resource upcycling and green hydrogen production for a sustainable energy future.
Publisher: Wiley
Date: 28-08-2013
Abstract: A simple thermal annealing method for layer thinning and etching of mechanically exfoliated MoS2 nanosheets in air is reported. Using this method, single-layer (1L) MoS2 nanosheets are achieved after the thinning of MoS2 nanosheets from double-layer (2L) to quadri-layer (4L) at 330 °C. The as-prepared 1L MoS2 nanosheet shows comparable optical and electrical properties with the mechanically exfoliated, pristine one. In addition, for the first time, the MoS2 mesh with high-density of triangular pits is also fabricated at 330 °C, which might arise from the anisotropic etching of the active MoS2 edge sites. As a result of thermal annealing in air, the thinning of MoS2 nanosheet is possible due to its oxidation to form MoO3 . Importantly, the MoO3 fragments on the top of thinned MoS2 layer induces the hole injection, resulting in the p-type channel in fabricated field-effect transistors.
Publisher: Elsevier BV
Date: 02-2020
Publisher: Springer Science and Business Media LLC
Date: 25-05-2021
DOI: 10.1038/S41467-021-23427-Y
Abstract: Despite its advantages of scalable process and cost-effectiveness, nanoimprinting faces challenges with imprinting hard materials (e.g., crystalline metals) at low/room temperatures, and with fabricating complex nanostructures rapidly (e.g., heterojunctions of metal and oxide). Herein, we report a room temperature ultrasonic nanoimprinting technique (named nanojackhammer) to address these challenges. Nanojackhammer capitalizes on the concentration of ultrasonic energy flow at nanoscale to shape bulk materials into nanostructures. Working at room temperature, nanojackhammer allows rapid fabrication of complex multi-compositional nanostructures made of virtually all solid materials regardless of their ductility, hardness, reactivity and melting points. Atomistic simulations reveal a unique alternating dislocation generation and recovery mechanism that significantly reduces the imprinting force under ultrasonic cyclic loading. As a proof-of-concept, a metal-oxide-metal plasmonic nanostructure with built-in nanogap is rapidly fabricated and employed for biosensing. As a fast, scalable, and cost-effective nanotechnology, nanojackhammer will enable various unique applications of complex nanostructures in optoelectronics, biosensing, catalysis and beyond.
No related grants have been discovered for Hong Li.