ORCID Profile
0000-0002-6515-7813
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Institute of Electrical and Electronics Engineers (IEEE)
Date: 2022
Publisher: Cambridge University Press (CUP)
Date: 09-2023
Publisher: IEEE
Date: 05-2012
Publisher: IEEE
Date: 10-2012
Publisher: MDPI AG
Date: 08-04-2022
DOI: 10.3390/APP12083746
Abstract: This article presents the design of a uni-planar MIMO antenna system for sub-6 GHz 5G-enabled smartphones. The MIMO antenna designed comprises four loop-shaped radiators placed at each corner of the mobile phone board, which follows the principle of pattern ersity. The single-antenna element resonates at 3.5 GHz, its impedance bandwidth is noted to be 1.28 GHz (3–4.28 GHz) for S11≤ −6 dB, and it is equal to 720 MHz (3.18–3.9 GHz) for S11≤ −10 dB. For a single-antenna element, a peak gain of 3.64 dBi is observed with an antenna efficiency of %. The isolation of dB between antenna elements is achieved for the MIMO configuration. Furthermore, the MIMO antenna designed provides enough radiation coverage to support different sides of the mobile phone board, which is an important feature for future 5G-enabled handsets. In addition, the impacts of human hands and heads on MIMO antenna performance are investigated, and acceptable performance in the data and conversation modes is observed.
Publisher: Hindawi Limited
Date: 28-09-2023
DOI: 10.1155/2023/5515263
Publisher: MDPI AG
Date: 17-06-2022
DOI: 10.3390/MI13060959
Abstract: This study provides an eight-component multiple-input multiple-output (MIMO) antenna architecture for fifth-generation (5G) mobile communication systems. The single antenna element is comprised of an L-shaped radiating component, an L-shaped parasitic element, and a ground plane with a rectangular slot. The main element with a slot-loaded ground plane helps to draw current from a coaxial feed from the other side of the board, while the parasitic element helps to elongate the current path and improve the impedance of the system. This enables the system to radiate at two different frequency ranges: 3.34–3.7 GHz and 4.67–5.08 GHz, with 360 MHz and 410 MHz bandwidths, respectively. For MIMO configuration, the radiating elements are designed on either side of a 0.8 mm thick FR-4 substrate, allowing space to accommodate a battery, radio frequency (RF) systems and subsystems, and camera and sensor modules. The corner and the middle elements are arranged in such a manner so that they can provide spatial and pattern ersity. Furthermore, at least 12 dB of isolation is established between any two radiating elements. Various MIMO performance parameters were evaluated, e.g., mean effective gain (MEG), channel capacity (CC), envelope correlation coefficient (ECC), realized gain, far-field characteristics, and efficiency. Single- and double-hand mode evaluations were performed to further demonstrate the capability of the proposed MIMO antenna. A prototype of the proposed MIMO antenna was manufactured and assessed to verify the simulated data. The measured and simulated results were found to be in good agreement. On the basis of its performance characteristics, the designed MIMO system could be used in 5G communication systems.
Publisher: The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS
Date: 2017
DOI: 10.3906/ELK-1512-83
Publisher: MDPI AG
Date: 06-04-2022
DOI: 10.3390/APP12073684
Abstract: The design of a 4 × 4 MIMO antenna for UWB communication systems is presented in this study. The single antenna element is comprised of a fractal circular ring structure backed by a modified partial ground plane having dimensions of 30 × 30 mm2. The single antenna element has a wide impedance bandwidth of 9.33 GHz and operates from 2.67 GHz to 12 GHz. Furthermore, the gain of a single antenna element increases as the frequency increases, with a peak realized gain and antenna efficiency of 5 dBi and %, respectively. For MIMO applications, a 4 × 4 array is designed and analyzed. The antenna elements are positioned in a plus-shaped configuration to provide pattern as well as polarization ersity. It is worth mentioning that good isolation characteristics are achieved without the utilization of any isolation enhancement network. The proposed MIMO antenna was fabricated and tested, and the results show that it provides UWB response from 2.77 GHz to over 12 GHz. The isolation between the antenna elements is more than 15 dB. Based on performance attributes, it can be said that the proposed design is suitable for UWB MIMO applications.
Publisher: MDPI AG
Date: 17-09-2022
DOI: 10.3390/ELECTRONICS11182948
Abstract: In this work, an efficient slotted waveguide antenna (SWA) system is designed for S-band high power microwave (HPM) applications. The designed SWA comprises of 10-slot elements placed on the broad wall of SWA with a modified Gaussian distribution (MGD), integrated with two inside-grooves and a Gaussian dielectric radome of high-density polyethylene (HDPE) material. The inside-grooves are introduced to suppress the surface current on the waveguide, which results in high gain as well as sidelobe level (SLL) reduction in the E-plane. The MGD controls the SLLs, and the unique Gaussian profile shape radome offers constant radiation characteristics. The proposed antenna system, within existing size constraints, offers a high gain of 20.1 dBi in conjunction with a high-power handling capability of greater than 100 MW. The designed SWA system has compact dimensions of 8.46λ0 × 1.38λ0 × 1.50λ0, with SLLs of −20 dB and −22 dB in the H- and E-plane, respectively. The HPM antenna system, radiating at 3 GHz, is fabricated on aluminium material using the milling process. The simulated SWA system has good agreement with measured results. Moreover, the proposed SWA system offers clear advantages in terms of its robustness, design simplicity, high power handling capability, and high gain.
Publisher: MDPI AG
Date: 30-06-2022
DOI: 10.3390/ELECTRONICS11132061
Abstract: For microwave imaging applications, a design for an ultra-wideband (UWB) fractal antenna is presented. The antenna design is composed of a pentagonal fractal patch radiator fed by a modified co-planar waveguide (CPW) ground plane. It is built on a low-loss Rogers RT/Duroid 5880 dielectric substrate with a dimensions of 24 × 30 × 0.787 mm3. According to the measurements, the designed antenna offers a fractional bandwidth of 123.56% ranging from 3 GHz to 12.7 GHz. In addition, a maximum gain of 3.6 dBi is achieved at 8.5 GHz. From the results, it is also observed that the proposed antenna structure attains constant radiation characteristics in the operating bandwidth, which is useful for microwave imaging applications. The time domain analysis of the proposed design is also performed, and it is observed that the designed antenna offers a group delay of ≤1.5 ns, which ensures minimum pulse distortion.
Publisher: MDPI AG
Date: 07-03-2023
DOI: 10.3390/PHOTONICS10030281
Abstract: An ultra wideband (UWB) radar cross-section (RCS) reduction metasurface has received attention in recent years. However, the majority of the research has concentrated on the physics and design of planar surfaces, which do not meet the standards of modern aerodynamics and aesthetics. In this paper, we offer a sophisticated strategy for designing a metasurface that can conform to the shape of any object, even those of moderate curvature, and can also achieve UWB RCS reduction by combining absorption, polarization conversion, and diffusion mechanisms. Firstly, an absorbing-polarization converter is designed, composed of a square patch with a truncated diagonal strip and ring. A thin Rogers RT/Duroid 5880 dielectric substrate layer is used in the structure, which is also appropriate for conformal conditions. The substrate layer and the ground plane are separated by an air gap to enhance the polarization conversion bandwidth (PCBW). For normal incident electromagnetic (EM) waves, the PCBW ranges from 10.8 to 31.3 GHz with polarization conversion ratio (PCR) values greater than 0.9 dB. Up to a 45∘ oblique incidence angle over the aforementioned band, the PCR efficiency is well maintained. Then, the optimized coding metasurface is formed by the Pancharatnam–Berry (PB) phase, consisting of meta-atoms “0” and “1” of the same size but different orientations, to realize the concept of cross-polarization diffusion. A theoretical investigation has been performed to analyze the RCS reduction performance of planar as well as conformal cylindrical surfaces. The results show that more than 10 dB of RCS reduction is experienced over UWB (10.8–31.3 GHz) for planar metasurfaces under linearly and circularly polarized incidence waves. Furthermore, the RCS reduction for cylindrical surfaces can be achieved in a similar frequency band above 10 dB up to an angle of 90∘. It can be deduced that our proposed flexible metasurface can be used as an absorber or a polarization converter and provide broadband RCS reduction, which is essential for multi-function and conformal stealth applications.
No related grants have been discovered for Umair Rafique.