ORCID Profile
0000-0001-5664-0558
Current Organisation
Pontificia Universidad Javeriana
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: MDPI AG
Date: 15-03-2023
DOI: 10.3390/MOLECULES28062674
Abstract: Amphotericin B (AmB) is an antibiotic with a wide spectrum of action and low multidrug resistance, although it exhibits self-aggregation, low specificity, and solubility in aqueous media. An alternative for its oral administration is its encapsulation in polymers modified with bioconjugates. The aim of the present computational research is to determine the affinity between AmB and six bioconjugates to define which one could be more suitable. The CAM-B3LYP-D3/6-31+G(d,p) method was used for all computational calculations. The dimerization enthalpy of the most stable and abundant systems at pH = 7 allows obtaining this affinity order: AmB_1,2-distearoyl-sn-glycerol-3-phosphorylethanolamine (DSPE) AmB_γ-cyclodextrin AmB_DSPEc AmB_retinol AmB_cholesterol AmB_dodecanol, where DSPEc is a DSPE analog. Quantum theory of atoms in molecules, the non-covalent interactions index, and natural bond orbital analysis revealed the highest abundance of noncovalent interactions for AmB-DSPE (51), about twice the number of interactions of the other dimers. Depending on the interactions’ strength and abundance of the AmB-DSPE dimer, these are classified as strong: O-H---O (2), N-H---O (3) and weak: C-H---O (25), H---H (18), C-H---C (3). Although the C-H---O hydrogen bond is weak, the number of interactions involved in all dimers cannot be underestimated. Thus, non-covalent interactions drive the stabilization of copolymers, and from our analysis, the most promising candidates for encapsulating are DSPE and γ-cyclodextrin.
Publisher: Wiley
Date: 25-10-2014
DOI: 10.1002/JCC.23752
Publisher: American Chemical Society (ACS)
Date: 04-08-2020
Publisher: American Chemical Society (ACS)
Date: 24-05-2019
Publisher: Elsevier BV
Date: 02-2013
Publisher: Elsevier BV
Date: 06-2022
Publisher: Elsevier BV
Date: 05-2009
Publisher: SciELO Agencia Nacional de Investigacion y Desarrollo (ANID)
Date: 04-2020
Publisher: Universidad Nacional de Colombia
Date: 06-09-2022
DOI: 10.15446/REV.COLOMB.QUIM.V51N1.101015
Abstract: En el presente estudio se realizaron cálculos con base en la Teoría del Funcional de la Densidad Electrónica (DFT) con la aproximación B3PW91/LANL2DZ para optimizar los sistemas monometálicos y bimetálicos Au9, Au8Pd, Au8Pt, AuPd8, AuPt8, Pd9 y Pt9. Los materiales fueron teóricamente evaluados como catalizadores para la oxidación de monóxido de carbono (CO) y se determinó el sistema más favorable para la adsorción de esta molécula. La sustitución de átomos de Pt y Pd por átomos de Au en los nonámeros generó un cambio en la estructura tridimensional del sistema. El análisis de reactividad global mostró que el clúster más reactivo es 𝑃𝑡9, seguido por 𝐴𝑢𝑃𝑡8. Los índices de Fukui identificaron los sitios más susceptibles para un ataque nucleofílico de ambos clústeres. La adsorción de CO generó una cascada de oxidación que liberó ~4,5 eV, indicando que la reacción es altamente exotérmica y exergónica. Los clústeres 𝐴𝑢𝑃𝑡8 y 𝑃𝑡9 mostraron los valores más bajos de energía de activación de la etapa determinante del mecanismo. En general, la sustitución de un átomo de platino (o paladio) por un átomo de oro no afecta la reactividad de los nonámeros y, por tanto, se infiere que el clúster 𝐴𝑢𝑃𝑡8 podría ser un catalizador promisorio en la oxidación de CO.
Publisher: American Chemical Society (ACS)
Date: 08-2007
DOI: 10.1021/JP073168G
Abstract: The potential energy surface of the (ethanol)2-water heterotrimers for the trans and gauche conformers of ethanol was studied using density functional theory. The same approximation was used for characterizing representative clusters of (ethanol)3, (methanol)3, and (methanol)2-water. Trimerization energies and enthalpies as well as the analysis of geometric parameters suggest that the structures with a cyclic pattern in the three hydrogen bonds of the type O-H---O (primary hydrogen bonds), where all molecules are proton donor-acceptor at the same time, are more stable than those with just two primary hydrogen bonds. Additionally, we propose the formation of "secondary hydrogen bonds" between hydrogen atoms of the methyl group of ethanol and the oxygen atom of water or other ethanol molecule (C-H---O), which were found to be weaker than the primary hydrogen bonds.
Publisher: Royal Society of Chemistry (RSC)
Date: 2011
DOI: 10.1039/C0CP02869J
Abstract: Quantum Chemical Topology (QCT) is used to reveal the dynamics of atom-atom interactions in a liquid. A molecular dynamics simulation was carried out on an ethanol-water liquid mixture at its azeotropic concentration (X(ethanol)=0.899), using high-rank multipolar electrostatics. A thousand (ethanol)(9)-water heterodecamers, respecting the water-ethanol ratio of the azeotropic mixture, were extracted from the simulation. Ab initio electron densities were computed at the B3LYP/6-31+G(d) level for these molecular clusters. A video shows the dynamical behavior of a pattern of bond critical points and atomic interaction lines, fluctuating over 1 ns. A bond critical point distribution revealed the fluctuating behavior of water and ethanol molecules in terms of O-H···O, C-H···O and H···H interactions. Interestingly, the water molecule formed one to six C-H···O and one to four O-H···O interactions as a proton acceptor. We found that the more localized a dynamical bond critical point distribution, the higher the average electron density at its bond critical points. The formation of multiple C-H···O interactions affected the shape of the oxygen basin of the water molecule, which is shown in three dimensions. The hydrogen atoms of water strongly preferred to form H···H interactions with ethanol's alkyl hydrogen atoms over its hydroxyl hydrogen.
Publisher: AIP Publishing
Date: 02-07-2014
DOI: 10.1063/1.4884642
Abstract: Chemically made, atomically precise phosphine-stabilized clusters Au9(PPh3)8(NO3)3 were deposited on titania and silica from solutions at various concentrations and the s les heated under vacuum to remove the ligands. Metastable induced electron spectroscopy was used to determine the density of states at the surface, and X-ray photoelectron spectroscopy for analysing the composition of the surface. It was found for the Au9 cluster deposited on titania that the ligands react with the titania substrate. Based on analysis using the singular value decomposition algorithm, the series of MIE spectra can be described as a linear combination of 3 base spectra that are assigned to the spectra of the substrate, the phosphine ligands on the substrate, and the Au clusters anchored to titania after removal of the ligands. On silica, the Au clusters show significant agglomeration after heat treatment and no interaction of the ligands with the substrate can be identified.
Publisher: Springer Science and Business Media LLC
Date: 14-07-2016
DOI: 10.1007/S00894-016-3050-9
Abstract: Bioethanol is one of the world's most extensively produced biofuels. However, it is difficult to purify due to the formation of the ethanol-water azeotrope. Knowledge of the azeotrope structure at the molecular level can help to improve existing purification methods. In order to achieve a better understanding of this azeotrope structure, the characterization of (ethanol)5-water heterohexamers was carried out by analyzing the results of electronic structure calculations performed at the B3LYP/6-31+G(d) level. Hexamerization energies were found to range between -36.8 and -25.8 kcal/mol. Topological analysis of the electron density confirmed the existence of primary (OH…O) hydrogen bonds (HBs), secondary (CH…O) HBs, and H…H interactions in these clusters. Comparison with three different solvated alcohol systems featuring the same types of atom-atom interactions permitted the following order of stability to be determined: (methanol)5-water > (methanol)6 > (ethanol)5-water > (ethanol)6. These findings, together with accompanying geometric and spectroscopic analyses, show that similar cooperative effects exist among the primary HBs for structures with the same arrangement of primary HBs, regardless of the nature of the molecules involved. This result provides an indication that the molecular ratio can be considered to determine the unusual behavior of the ethanol-water system. The investigation also highlights the presence of several types of weak interaction in addition to primary HBs. Graphical Abstract Water-ethanol clusters exhibit a variety of interaction types between their atoms, such as primary OH...O (blue), secondary CH...O (green) and H...H (yellow) interactions as revealed by Quantum Chemical Topology.
Publisher: MDPI AG
Date: 03-05-2023
DOI: 10.3390/TROPICALMED8050263
Abstract: Background: Chagas disease is a potentially fatal disease caused by the parasite Trypanosoma cruzi. There is growing scientific interest in finding new and better therapeutic alternatives for this disease’s treatment. Methods: A total of 81 terpene compounds with potential trypanocidal activity were screened and found to have potential T. cruzi cysteine synthase (TcCS) inhibition using molecular docking, molecular dynamics, ADME and PAIN property analyses and in vitro susceptibility assays. Results: Molecular docking analyses revealed energy ranges from −10.5 to −4.9 kcal/mol in the 81 tested compounds, where pentacyclic triterpenes were the best. Six compounds were selected to assess the stability of the TcCS–ligand complexes, of which lupeol acetate (ACLUPE) and α-amyrin (AMIR) exhibited the highest stability during 200 ns of molecular dynamics analysis. Such stability was primarily due to their hydrophobic interactions with the amino acids located in the enzyme’s active site. In addition, ACLUPE and AMIR exhibited lipophilic characteristics, low intestinal absorption and no structural interferences or toxicity. Finally, selective index for ACLUPE was .94, with moderate potency in the trypomastigote stage (EC50 = 15.82 ± 3.7 μg/mL). AMIR’s selective index was .36 and it was moderately potent in the amastigote stage (IC50 = 9.08 ± 23.85 μg/mL). Conclusions: The present study proposes a rational approach for exploring lupeol acetate and α-amyrin terpene compounds to design new drugs candidates for Chagas disease.
Publisher: American Chemical Society (ACS)
Date: 05-02-2020
Publisher: Elsevier BV
Date: 04-2023
Publisher: AIP Publishing
Date: 11-04-2012
DOI: 10.1063/1.3701563
Abstract: A computational study of (ethanol)n-water, n = 1 to 5 heteroclusters was carried out employing the B3LYP/6-31+G(d) approach. The molecular (MO) and atomic (AO) orbital analysis and the topological study of the electron density provided results that were successfully correlated. Results were compared with those obtained for (ethanol)n, (methanol)n, n = 1 to 6 clusters and (methanol)n-water, n = 1 to 5 heteroclusters. These systems showed the same trends observed in the (ethanol)n-water, n = 1 to 5 heteroclusters such as an O---O distance of 5 Å to which the O–H---O hydrogen bonds (HBs) can have significant influence on the constituent monomers. The HOMO of the hetero(clusters) is less stable than the HOMO of the isolated alcohol monomer as the hetero(cluster) size increases, that destabilization is higher for linear geometries than for cyclic geometries. Changes of the occupancy and energy of the AO are correlated with the strength of O–H---O and C–H---O HBs as well as with the proton donor and/or acceptor character of the involved molecules. In summary, the current MO and AO analysis provides alternative ways to characterize HBs. However, this analysis cannot be applied to the study of H---H interactions observed in the molecular graphs.
Publisher: Springer Science and Business Media LLC
Date: 19-03-2015
DOI: 10.1007/S00894-015-2593-5
Abstract: Diethyl carbonate (DEC) is an oxygenated fuel additive. During its synthesis through a promising green process, a DEC-water azeotrope is formed, which decreases DEC production efficiency in the gas phase. Molecular information about this system is scarce but could be of benefit in understanding (and potentially improving) the synthetic process. Therefore, we report a detailed computational study of the conformers of DEC, and their microsolvation with up to four water molecules, with the goal of understanding the observed 1:3 DEC:H2O molar ratio. The most stable DEC conformers (with mutual energy differences < 1.5 kcal mol(-1)) contribute to the energetic and structural properties of the complexes. An exhaustive stochastic exploration of each potential energy surface of DEC-(H2O)n, (where n = 1, 2, 3, 4) heteroclusters discovered 3, 8, 7, and 4 heterodimers, heterotrimers, heterotetramers, and heteropentamers, respectively, at the MP2/6-311++G(d,p) level of theory. DEC conformers and energies of the most stable structures at each heterocluster size were refined using CCSD(T)/6-311++G(d,p). Energy decomposition, electron density topology, and cooperative effects analyses were carried out to determine the relationship between the geometrical features of the heteroclusters and the non-covalent interaction types responsible for their stabilization. Our findings show that electrostatic and exchange energies are responsible for heterocluster stabilization, and also suggest a mutual weakening among hydrogen bonds when more than three water molecules are present. All described results are complementary and suggest a structural and energetic explanation at the molecular level for the experimental molar ratio of 1:3 (DEC:H2O) for the DEC-water azeotrope.
Publisher: Elsevier BV
Date: 06-2020
Publisher: American Chemical Society (ACS)
Date: 09-12-2021
Publisher: Royal Society of Chemistry (RSC)
Date: 2022
DOI: 10.1039/D2OB00387B
Abstract: In this research the sequential generation and cyclization of
Publisher: Wiley
Date: 26-10-2010
DOI: 10.1002/QUA.22664
No related grants have been discovered for Sol Mejía.