ORCID Profile
0000-0003-1409-5699
Current Organisation
University of the Sunshine Coast
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Elsevier BV
Date: 09-2017
Publisher: Informa UK Limited
Date: 22-01-2016
Publisher: Canadian Science Publishing
Date: 11-2010
DOI: 10.1139/X10-171
Abstract: New sensor-based approaches for assessing the quantity, quality, and value of timber are being developed with the goals of improving the accuracy and economics of forest measurements. One new approach is based on terrestrial laser scanning (TLS). Thirty-three plots in six radiata pine (Pinus radiata D. Don) stands were scanned using TLS. Tree locations were automatically detected. Stem profiles were measured using three methods: (i) TLS scans, (ii) Atlas Cruiser inventory procedures, and (iii) manual measurement after harvesting. Stems were optimally bucked based on log specifications and prices for Australian markets. Tree values and log product yields were estimated for the TLS data and compared with estimates based on Cruiser and actual manual measurements of stem profiles. TLS volume and value recovery were within 8% and 7%, respectively, of actual harvester recovery for five of the six stands in which it was used. Cruiser volume and value estimates were both within 4% of actual harvester recovery. Plot preparation procedures, tree characteristics, and taper equations used to model diameters on hidden stem sections affected the accuracy of automated stem detection and profile measurements for the TLS system. Improvements in data capture and analytical procedures should improve the accuracy of TLS-based volume and value estimates.
Publisher: MDPI AG
Date: 09-04-2021
DOI: 10.3390/F12040455
Abstract: Australia’s large potential forest bioenergy resource is considerably underutilised, due largely to its high delivered costs. Drying forest biomass at the roadside can potentially reduce its delivered cost through weight reduction and increased net calorific value. There has been little research on the impact of roadside drying for Australian conditions and plantation species. This study compared delivered costs for three forest biomass types—Eucalyptus globulus plantation whole trees and logging residue (LR)-disaggregated (LR conventional) or aggregated (LR fuel-adapted)—and three roadside storage scenarios—no storage, ≤two-month storage and optimal storage—to supply a hypothetical thermal power plant in south-west Western Australia. The study was performed using a tactical linear programming tool (MCPlan). Roadside storage reduced delivered costs, with optimal storage (storage for up to 14 months) producing the lowest costs. Delivered costs were inversely related to forest biomass spatial density due to transport cost reductions. Whole trees, which had the highest spatial density, stored under the optimal storage scenario had the lowest delivered costs (AUD 7.89/MWh) while LR conventional, with the lowest spatial density, had the highest delivered costs when delivered without storage (AUD 15.51/MWh). For both LR types, two-month storage achieved ~60% of the savings from the optimal storage scenario but only 23% of the savings for whole trees. The findings suggested that roadside drying and high forest biomass spatial density are critical to reducing forest biomass delivered costs.
Publisher: Canadian Science Publishing
Date: 12-2010
DOI: 10.1139/X10-151
Abstract: Forest management planners usually treat potential fire loss estimates as exogenous parameters in their timber production planning processes. When they do so, they do not account for the fact that forest access road construction, timber harvesting, and silvicultural activities can alter a landscape’s vegetation or fuel composition, and they ignore the possibility that such activities may influence future fire losses. We develop an integrated fire and forest management planning methodology that accounts for and exploits such interactions. Our methodology is based on fire occurrence, suppression, and spread models, a fire protection value model that identifies crucial stands, the harvesting of which can have a significant influence on the spread of fires across the landscape, and a spatially explicit timber harvest scheduling model. We illustrate its use by applying it to a forest management unit in the boreal forest region of the province of Alberta in western Canada. We found that for our study area, integrated fire – forest management planning based on our methodology could result in an 8.1% increase in net present value when compared with traditional planning in which fire loss is treated as an exogenous factor.
Publisher: MDPI AG
Date: 11-05-2021
DOI: 10.20944/PREPRINTS202105.0241.V1
Abstract: Under the & Korean emission trading system in the forestry sector (KETSF)& initiative, the South Korean government has developed several greenhouse gas (GHG) emissions reduction programs that include forestry activities as the cornerstones of the initiative. Forest management is deemed to be a major strategy to implement KETSF this has been confirmed by most participants in the program, who have shown their preference for forest management projects as the most effective and encouraging strategy to participate in the KETSF program. For a successful implementation of KETSF projects is essential to explore methods that optimize the positive impacts of such strategies, thereby maximizing the economic returns and carbon stocks that result from the implementation of forest management activities. Thus, this study investigated several value-added KETSF projects in South Korea, which included simulated scenarios under two main forest management strategies: one based on an extension of the rotation age, and a second one based on reforestation with new species. Five forest management scenarios were examined and evaluated in their ability to maximize carbon stocks and economic returns. Based on the results, Scenarios 2 and 4 were identified as the best KETSF projects in terms of carbon stock increments. Additionally, the results indicated that projects including reforestation with new species added more economic value than projects that considered an extension of the rotation age. The study also revealed that KETSF projects generated revenue in both scenarios, by either extending the rotation age or by implementing reforestation with new species.
Publisher: Elsevier BV
Date: 06-2015
Publisher: American Chemical Society (ACS)
Date: 12-12-2020
DOI: 10.1021/JACS.9B11544
Abstract: It is meaningful but challenging to develop a fluorescent probe for temperature sensing in living cells because it should possess the features of good cytocompatibility, easy read out, and high resolution. Herein, we successfully synthesized emissive star-like cage-based organic temperature-sensitive polymers that can assemble into nanoparticles in aqueous solution. The obtained nanoparticle can be easily tuned to full-color emission (including white light emission) with a temperature resolution of at least 0.5 °C by encapsulating different doses of guest dyes ((4-dimethylamino-2'-butoxychalcone (DMBC) and Nile Red (NR)) through a cascade Förster resonance energy transfer (FRET) effect. Moreover, the white light emission polymeric hybrid nanoparticles exhibit reversible stimuli response toward temperature and can be used as probes for temperature sensing in live cells through their fluorescent color variation between white and orange emission with good cytocompatibility.
Publisher: MDPI AG
Date: 17-11-2022
DOI: 10.3390/F13111941
Abstract: Two integrated harvesting methods have been primarily applied to increase the opportunity for forest biomass utilization. In Korea, small shovels with a carrier for cut-to-length harvesting (CTL system) and tower yarders for whole-tree harvesting (WT system) are commonly used for the transportation of tree assortments (i.e., sawlogs and logging residue). No previous studies are available in South Korea that have compared and highlighted the operational performance and yield of logging residues between the CTL and WT harvesting systems. Thus, our study’s main objectives were to (1) evaluate the productivity and costs of the two harvesting systems through a standard time study method and (2) estimate the amount of harvesting logging residue at the landing. The productivities of the CTL and WT systems were 1.45 and 2.99 oven-dried tons (odt) roductive machine hour (PMH), at a cost of 86.81 and 45.41 USD/odt, respectively. In the WT system, the amount of logging residue (2.1 odt/ha) collected at the landing was approximately four-times larger than that of the CTL system (0.5 odt/ha). Our results suggested that the WT system is a less expensive and more suitable system when there are markets demanding logs and biomass, whereas the CTL system remains a less expensive option for stem-only harvesting. Furthermore, these results are important for estimating the economic and environmental amount of residue that could be potentially recovered and utilized from the forest types included in the study.
Publisher: MDPI AG
Date: 21-05-2021
DOI: 10.3390/F12060651
Abstract: Quantifying the impact of carbon (C) and timber prices on harvest scheduling and economic returns is essential to define strategies for the sustainable management of short-rotation plantations so that they can provide timber products and contribute to C sequestration. In this paper, we present a mixed-integer linear programming model that optimizes harvest scheduling at the forest level, C sequestration, and Net Present Value (NPV) over a planning period of up to 15 years. The model included revenue from the sale of timber (pulplogs) and credits from the net C sequestered during the life of the stands. In addition, plantation establishment, management, harvesting, and transportation costs were included in the analysis. The study area comprised 88 Eucalyptus grandis W. Hill and Eucalyptus dunnii Maiden stands located in Uruguay, totaling a forest area of nearly 1882 ha. The study investigated the impact of C and timber prices on NPV, harvest schedules, stands’ harvest age, timber flows to customers, and C sequestered per period. The maximum NPV among all the scenarios evaluated (USD 7.53 M) was calculated for a C price of 30 USD t−1, an interest rate of 6%, and a timber price of 75 USD m−3. This was USD 2.14 M higher than the scenario with the same parameters but that included only revenue from timber. C prices also impacted stands’ harvest age, C sequestration, and timber flows delivered to end customers. On average, in scenarios that included C prices, timber flows and C sequestration increased by 15.4 and 12.1%, respectively, when C price increased from 5 to 30 USD t−1. These results demonstrate that harvest scheduling, harvest age, and NPV are very sensitive to C and timber, and that the best economic returns are obtained when the stands are managed to maximize timber production and C sequestration.
Publisher: Elsevier BV
Date: 11-2012
Publisher: Elsevier BV
Date: 2015
Publisher: MDPI AG
Date: 29-04-2022
DOI: 10.3390/F13050701
Abstract: In-forest drying of roundwood and biomass (residues) can result in more efficient transport operations from an economical and environmental perspective. On the negative side, in-forest drying may result in dry matter losses (DML), impacting the quantity and quality of residues delivered to energy plants. This paper investigated the impact of roundwood and residues in-forest drying and DML on supply chain costs and Greenhouse Gas (GHG) emissions. For the assessment, a short-term optimization planning tool was applied to a supply chain located in Asturias, Spain, consisting of fourteen supply points and two demand points: A pulp mill (demanding roundwood) and a power plant (demanding residues). Four scenarios were included in the analysis comprising different combinations of DML for roundwood and residues resulting from in-forest drying. Our results indicate that in scenarios that include in-forest drying and DML, the negative economic effects are offset by the substantial reductions in transport costs and GHG emissions. In-forest drying of roundwood and residues without DML can result in a 6.5% reduction in supply chain costs, 14.9% fewer truckloads to destination points, and 18.1% less fuel consumption and GHG emissions.
Publisher: American Chemical Society (ACS)
Date: 22-11-2022
Abstract: It remains a great challenge to design and synthesize organic luminescent molecules with strong emission in both dilute solution and aggregate state. Herein, an organic cage with dodecadansyl groups (D-RCC1) from an easy sulfonation reaction displays strong emissive behavior in dilute organic solution with a quantum yield of 42%. Moreover, D-RCC1 exhibits an ultrahigh quantum yield of 92% in the solid state, which is more than 3 times that of 27% for the model compound D-DEA. The results of the experiment and theoretical calculation show that the three-dimensional symmetrical skeleton of the organic cage anchored evenly by multiple dye molecules effectively satisfies both high local density and a symmetrical distribution of chromophores, which prevents the interaction of dye molecules and ensures that dye molecules have strong emission in both single-molecule and aggregate states.
Publisher: Czech Academy of Agricultural Sciences
Date: 31-07-2017
DOI: 10.17221/10/2017-JFS
Publisher: MDPI AG
Date: 09-03-2022
DOI: 10.3390/F13030431
Abstract: Tree morphological characteristics, particularly straightness and lean, significantly influence the value of the commercial products that can be obtained. Despite this, they are not usually evaluated in timber field inventories because traditional techniques are labor-intensive and largely subjective, hence the use of these parameters is limited to research and genetic breeding programs. Here, a non-destructive, fully automated methodology is presented that estimates the parameters for describing straightness and lean using terrestrial laser scanning (TLS) data. It is based on splitting stems into evenly spaced sections and estimating their centers, which are then used to automatically calculate the maximum sagitta, sinuosity, and lean of each tree. The methodology was applied in a breeding trial plot of Pinus pinaster, and the results obtained were compared with field measurements of straightness and lean based on visual classification. The methodology is robust to errors in the estimation of section centers, the basis for calculating shape parameters. Besides, its accuracy compares favorably with traditional field techniques, which often involve problems of misclassification. The new methodology is easy to use, less expensive, and overcomes the drawbacks of traditional field techniques for obtaining straightness and lean measurements. It can be modified to apply to any species and stand typology.
Publisher: National Inquiry Services Center (NISC)
Date: 12-2011
Publisher: MDPI AG
Date: 24-06-2021
DOI: 10.3390/F12070834
Abstract: On an international comparison basis, Australia’s utilisation of forest residues remains very low. While there are numerous factors contributing to this low utilisation, this is greatly explained by the limited timely and accurate data on availability, quality, and location of residues generated during harvesting operations. This manuscript reports on the development and testing of a new freeware tool called FIELD (Forest Inventory Electronic Live Data), which supports the real-time monitoring and estimation of forestry harvesting residues. As inputs, FIELD uses StanForD pri files and geo-location data extracted from the harvester’s onboard computer in combination with locally developed species-specific allometric equations. Using a case study, this paper describes how FIELD works operationally and illustrates the range of support features that the tool can provide to decision-makers by producing real-time data on the availability, quality, and location of harvesting residues. In addition, it is discussed how the tool can contribute to supporting decisions during forest operations associated with the feasibility of residue utilisation in specific site conditions. Our results show that it is possible to estimate the availability of harvesting residues at geo-located sites dynamically, although further testing of the tool is required for a more accurate estimation and monitoring of harvesting residues.
Publisher: Canadian Science Publishing
Date: 10-2011
DOI: 10.1139/X11-122
Abstract: Sustainability and globally competitive forest product supply markets are two of the pressures that forest managers face today. Both require that managers have good metrics of the quantity, quality, and location of timber resources within their forests. The value of this information must be weighed against the cost of obtaining it and losses associated with not having access to it. A cost-plus-loss procedure for assessing the relative contributions to error in estimating stand-level value recovery and log product yields was developed and tested on two Douglas-fir ( Pseudotsuga menziesii (Mirb.) Franco) stands in Oregon. The sources of error were those associated with (i) market complexity, (ii) s ling intensity, (iii) stem quality assessment methods, and (iv) bucking optimization algorithms. Two performance measures were used as part of the assessment procedure: market fulfilment and the difference in total net value recovery between having complete and less than complete information. Average market fulfilment ranged between 60% and 100%. The difference in total net value recovery ranged from –21.2% to +0.8%. Stem quality assessment followed by bucking optimization algorithms and s ling intensity had the greatest effects on these performance measures. Market complexity had a negligible effect on these performance measures but affected net value recovery.
Publisher: Informa UK Limited
Date: 03-04-2023
Publisher: Elsevier
Date: 2016
Publisher: Elsevier BV
Date: 04-2021
Publisher: Canadian Science Publishing
Date: 06-2015
Abstract: The cost of harvesting short-rotation plantation eucalypts can be in excess of AU$2500·ha −1 . Despite this high cost, the extent to which harvesting productivity is affected by tree genetics is not well understood. We address this issue in a study of two 10-year-old genetic field trials of Eucalyptus globulus Labill. in Australia. Standing-tree traits analysed were survival, diameter at breast height, basal area, and stem straightness and forking. Harvest traits analysed were volume, time, and productivity. Genetic group and within-group genetic variation (additive and dominance), stand-level family variation, phenotypic and genetic correlations, and the effects of inbreeding were estimated for these traits. The different scenarios studied showed that plantation harvest productivity was affected by tree genetics to some degree but was mainly affected through positive covariation with stem diameter. Harvest productivity is thus unlikely to have been adversely affected by past selection. Although no significant additive or dominance genetic variation in stem forking or straightness was detected, weak phenotypic correlations were consistent with harvest productivity being higher in straighter trees with no forking. High inbreeding depression was evident for growth and survival however, in open-pollinated progeny, this resulted in only a slight reduction in harvest productivity (5.5%) compared with out-crossed progeny.
Publisher: Informa UK Limited
Date: 2013
Publisher: MDPI AG
Date: 29-10-2021
DOI: 10.3390/F12111497
Abstract: Mechanized timber harvesting is cost efficient and highly productive. However, mechanized harvesting operations are often associated with several environmental problems, including soil compaction and disturbance. Soil compaction impedes air circulation between the soil and atmosphere, which in turn results in increased concentrations of CO2 within soil pores. In this study, we investigated the impact of forest machine traffic on soil conditions to determine soil CO2 efflux (Fc), and soil CO2 concentrations (Sc). Field measurements included soil bulk density (BD), soil temperature (ST), soil water content (SWC), Fc, and Sc over a 3-year period at a specific thinning operation site (Hwacheon-gun) in the Gangwon Province of Korea. To assess the soil impacts associated with machine traffic, we established four machine-treatment plots (MT) characterized by different geographical and traffic conditions. The results revealed that BD, Sc, and SWC increased significantly on the disturbed track areas (p 0.05). Furthermore, reduced soil Fc values were measured on the soil-compacted (machine disturbed) tracks in comparison with undisturbed (control) areas. Variations in BD, SWC, and Sc were significantly different among the four MT plots. Additionally, in comparison with undisturbed areas, lower Fc and higher Sc values were obtained in compacted areas with high soil temperatures.
Publisher: MDPI AG
Date: 04-06-2021
DOI: 10.3390/F12060742
Abstract: Under the Korean Emission Trading System in The Forestry Sector (KETSF) initiative, the Korean government has developed several greenhouse gas (GHG) emissions reduction programs that include forestry activities as cornerstones of the initiative. Forest management is deemed to be a major strategy to implement KETSF this has been confirmed by most participants in the program, who have shown their preference for forest management projects as the most effective and encouraging strategy to participate in the KETSF program. For a successful implementation of KETSF projects, it is essential to explore methods that optimize the positive impacts of such strategies, thereby maximizing the economic returns and carbon stocks that result from the implementation of forest management activities. Thus, this study investigated the economic returns of several KETSF projects in Korea, which included simulated scenarios under two main forest management strategies, one based on an extension of the rotation age, and a second one based on reforestation with new species. Five forest management scenarios were examined and evaluated in their ability to maximize carbon stocks and economic returns. Based on the results, two scenarios were identified as the best KETSF projects in terms of carbon stock increments. Additionally, the results indicated that projects including reforestation with new species added more economic value than projects that considered an extension of the rotation age. The study also revealed that KETSF projects generated revenue in both scenarios, by either extending the rotation age or by implementing reforestation with new species.
Publisher: Elsevier BV
Date: 12-2013
Publisher: IEEE
Date: 07-2014
No related grants have been discovered for Mauricio Acuna.