ORCID Profile
0000-0003-0072-5784
Current Organisations
Technical University of Denmark
,
University of Queensland Australian Institute for Bioengineering and Nanotechnology
,
CSIRO
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: American Chemical Society (ACS)
Date: 12-03-2019
Abstract: A two-step method to encapsulate an oil core with an impermeable shell has been developed. A thin metallic shell is deposited on the surface of emulsion droplets stabilized by metal nanoparticles. This thin shell is shown to prevent diffusion of the oil from within the core of the metal-shell microcapsules when placed in a continuous phase that fully dissolves the oil. The stabilizing nanoparticles are sterically stabilized by poly(vinyl pyrrolidone) chains and are here used as a catalyst/nucleation site at the oil-water interface to grow a secondary metal shell on the emulsion droplets via an electroless deposition process. This method provides the simplest scalable route yet to synthesize impermeable microcapsules with the added benefit that the final structure allows for drastically improving the overall volume of the encapsulated core to, in this case, >99% of the total volume. This method also allows for very good control over the microcapsule properties, and here we demonstrate our ability to tailor the final microcapsule density, capsule diameter, and secondary metal film thickness. Importantly, we also demonstrate that such impermeable microcapsule metal shells can be remotely fractured using ultrasound-based devices that are commensurate with technologies currently used in medical applications, which demonstrate the possibility to adapt these microcapsules for the delivery of cytotoxic drugs.
Publisher: The Electrochemical Society
Date: 18-12-2008
DOI: 10.1149/1.3050400
Abstract: The electrochemical performance of anode supported cells with screen-printed Sr-doped lanthanum cobalt oxide cathodes was studied using electrochemical impedance spectroscopy and polarization measurements. In order to obtain information on the resistance contribution from the cathode alone symmetrical cell measurements were carried out. Analysis of the symmetrical cell data in term of a distribution of relaxation times aided in the selection of an appropriate equivalent circuit for the cathode. Cell performance was dependent on the interdiffusion barrier layer and it was shown that the concentration polarization losses were strongly overlapped with the cathode losses, which complicates the deconvolution of the impedance spectra into in idual process and / or electrode specific contributions.
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C8TB00348C
Abstract: Novel method of producing metal microcapsules, using nanoparticles as the stabiliser, allows better control of nanoparticle distribution thus optimisation of metal shells.
Publisher: Walter de Gruyter GmbH
Date: 2011
Abstract: In recent years extended focus has been placed on monitoring and understanding degradation mechanisms in both solid oxide fuel cells and solid oxide electrolysis cells. The time-consuming nature of degradation experiments and the disparate conclusions from experiment reproductions indicates that not all degradation mechanisms are fully understood. Traditionally, cell degradation has been attributed to the materials, processing and cell operating conditions. More recently, focus has been placed on the effect of raw material and gas impurities and their long-term effect on cell degradation. Minor impurities have been found to play a significant role in degradation and in some cases can overshadow the cell operation condition related degradation phenomenon. In this review, several degradation diagnostic tools are discussed, a benchmark for a desirable degradation rate is proposed and degradation behaviour and mechanisms are discussed. For ease of navigation, the review is separated into the various cell components – fuel electrode, electrolyte and oxygen electrode. Finally, nano-particle impregnate stability is discussed.
Publisher: American Chemical Society (ACS)
Date: 16-01-2018
DOI: 10.1021/ACS.LANGMUIR.7B02874
Abstract: Efficient encapsulation of small chemical molecules and their controlled targeted delivery provides a very important challenge to be overcome for a wide range of industrial applications. Typically rapid diffusion of these actives across capsule walls has so far prevented the development of a versatile widely applicable solution. In an earlier publication, we have shown that thin metal shells are able to permanently retain small molecules. The critical step in the microcapsule synthesis is the formation of a strongly adsorbed, dense monolayer of catalytic nanoparticles on the surface as this affects the secondary metal film quality. Control over Pt-nanoparticle adsorption density and a clear understanding of Pt-nanoparticle adsorption kinetics is therefore paramount. Maximising the density of heterogeneous catalysts on surfaces is generally of interest to a broad range of applications. In this work, transmission electron microscopy (TEM) and quartz crystal microbalance (QCM) are used to demonstrate that the concentration of nanoparticle polymer stabilizer used during particle synthesis and nanoparticle suspension concentration can be used to control nanoparticle surface adsorption density. We demonstrate that excess polymer, which is often used in nanoparticle synthesis but rarely discussed as an important parameter in the literature, can compete with and thus drastically affect the adsorption of the Pt-nanoparticles.
Publisher: Wiley
Date: 21-06-2017
Abstract: Polymer microcapsules have been used commercially for decades, however they have an inherent flaw which renders them impractical as a carrier of small, volatile molecules. The porous nature of the polymer shell allows for diffusion of the encapsulated molecules into the bulk. The use of metal shells is an innovative way to prevent undesired loss of small molecules from the core of microcapsules, however it is important, particularly when using expensive metals to ensure that the resulting shell is as thin as possible. Here we investigate the fundamental mechanisms controlling the gold shell thickness when a fragrance oil is encapsulated in a poly(methyl methacrylate) shell. We consider the distribution of the nanoparticles on the capsule surface, and from quantification of the adsorbed nanoparticle (NP) density and resulting shell thickness, we propose mechanisms to describe the gold shell growth for systems with high and low NP surface coverage. We suggest from our observations that the gold grows to fill in the gaps between NPs. At low NP concentrations, thicker metal shells form. We postulate that this is due to the low NP density on the surface, forcing the gold clusters to grow larger before they meet the adjacent ones. Thus, to grow the thinnest possible shells a densely packed monolayer of platinum nanoparticles is required on the capsule surface.
Publisher: American Chemical Society (ACS)
Date: 26-06-2015
Abstract: Encapsulation and full retention of small molecular weight active ingredients is a challenging task that remains unsolved by current technologies used in industry and academia. In particular, certain everyday product formulations provide difficult environments in which preventing active leakage through capsule walls is not feasible. For ex le, a continuous phase that can fully dissolve an encapsulated active will typically force full release over a fraction of the intended lifetime of a product. This is due to the inherent porosity of polymeric membranes typically used as capsule wall material in current technologies. In this study, we demonstrate a method for preventing undesired loss of encapsulated actives under these extreme conditions using a simple threestep process. Our developed methodology, which forms an impermeable metal film around polymer microcapsules, prevents loss of small, volatile oils within an ethanol continuous phase for at least 21 days while polymeric capsules lose their entire content in less than 30 min under the same conditions. Polymer shell-oil core microcapsules are produced using a well-known cosolvent extraction method to precipitate a polymeric shell around the oil core. Subsequently, metallic catalytic nanoparticles are physically adsorbed onto the microcapsule polymeric shells. Finally, this nanoparticle coating is used to catalyze the growth of a secondary metallic film. Specifically, this work shows that it is possible to coat polymeric microcapsules containing a model oil system or a typical fragrance oil with a continuous metal shell. It also shows that the coverage of nanoparticles on the capsule surface can be controlled, which is paramount for obtaining a continuous impermeable metal film. In addition, control over the metal shell thickness is demonstrated without altering the capability of the metal film to retain the encapsulated oils.
Publisher: American Chemical Society (ACS)
Date: 18-06-2005
DOI: 10.1021/JP051459O
Abstract: The interaction between redox polymers, based on Ru- or Os-bis(2,2'-bipyridyl)-poly(4-vinylpyridine), and carbon nanotubes was investigated by spectroscopic and microscopic techniques. These metallopolymers were found to be excellent dispersants for nanotubes, as a result of a good wetting interaction between polymer and nanotubes. The results obtained show that well-coated in idual nanotubes can be obtained. In addition, interactions between nanotubes and polymers did not significantly affect the electronic and electrochemical properties of the metallopolymers. On the basis of the electrochemical properties of the polymers this opens the possibility of adding functionality through interaction with nanotubes, either as redox active materials with enhanced mechanical properties or by using these modified nanotubes as nanosized electrochemical sensors.
Publisher: American Chemical Society (ACS)
Date: 25-10-2023
Publisher: Wiley
Date: 16-04-2010
Publisher: Elsevier BV
Date: 03-2022
DOI: 10.1016/J.JCIS.2021.11.062
Abstract: The efficient encapsulation of small molecule active ingredients has been a challenge for many decades across many commercial applications. Recently, successful attempts to address this issue have included deposition of thin metal shells onto liquid filled polymer microcapsules or emulsion droplets to provide an impermeable barrier to diffusion. In this work we have developed a novel method to protect small molecule active ingredients by deposition of thin mineral shells. Platinum nanoparticles are used to catalyse and direct growth of a calcium phosphate shell onto liquid filled polymer microcapsules under various reaction conditions. Findings indicate that a non-porous protective shell is formed on the majority of the microcapsule population, with small concentrations of the core material being released only from those microcapsules with defects, over a 7 days period, when conducting forced release studies into a solvent for the core oil. The resulting microcapsules show no significant cell toxicity when exposed to HEK 293 cells for 72 h.
Publisher: Springer Science and Business Media LLC
Date: 13-04-2015
DOI: 10.1038/NMAT4266
Abstract: Bismuth-oxide-based materials are the building blocks for modern ferroelectrics, multiferroics, gas sensors, light photocatalysts and fuel cells. Although the cubic fluorite δ-phase of bismuth oxide (δ-Bi2O3) exhibits the highest conductivity of known solid-state oxygen ion conductors, its instability prevents use at low temperature. Here we demonstrate the possibility of stabilizing δ-Bi2O3 using highly coherent interfaces of alternating layers of Er2O3-stabilized δ-Bi2O3 and Gd2O3-doped CeO2. Remarkably, an exceptionally high chemical stability in reducing conditions and redox cycles at high temperature, usually unattainable for Bi2O3-based materials, is achieved. Even more interestingly, at low oxygen partial pressure the layered material shows anomalous high conductivity, equal or superior to pure δ-Bi2O3 in air. This suggests a strategy to design and stabilize new materials that are comprised of intrinsically unstable but high-performing component materials.
Publisher: Frontiers Media SA
Date: 30-08-2018
Publisher: Elsevier BV
Date: 10-2019
DOI: 10.1016/J.JCIS.2019.07.020
Abstract: Metal shell microcapsules have been shown to completely retain their core until its release is triggered, making them a promising candidate for use as a controllable drug delivery vehicle due to their superior retention properties as compared to polymer shell microcapsules. Focused ultrasound (FUS) has been successfully utilised to trigger release of lipophilic drugs from polymer microcapsules, and in this work the response of gold shell microcapsules with and without an inner polymeric shell, to FUS and standard ultrasound is explored. The results show that gold shell microcapsules with an inner polymer shell rupture when exposed to standard ultrasound and that there is a linear correlation between the gold shell thickness and the extent of shell rupture. When FUS is applied to these microcapsules, powers as low as 0.16 W delivered in bursts of 10 ms/s over a period of 120 s are sufficient to cause rupture of 53 nm gold shell microcapsules. Additional findings suggest that gold shell microcapsules without the polymer layer dispersed in a hydrogel matrix, as opposed to aqueous media, rupture more efficiently when exposed to FUS, and that thicker gold shells are more responsive to ultrasound-triggered rupture regardless of the external environment. Release of dye from all successfully ruptured capsules was sustained over a period of between 7 and 35 days. These findings suggest that emulsion-templated gold shell microcapsules embedded in a hydrogel matrix would be suitable for use as an implantable drug delivery vehicle with FUS used to externally trigger release.
Publisher: American Chemical Society (ACS)
Date: 23-05-2013
DOI: 10.1021/IE3033075
Publisher: Elsevier BV
Date: 12-2016
DOI: 10.1016/J.JCIS.2016.08.058
Abstract: The solvent evaporation method for producing microcapsules relies upon the correct wetting conditions between the three phases involved in the synthesis to allow core-shell morphologies to form. By measuring the interfacial tensions between the oil, polymer and aqueous phases, spreading coefficients can be calculated, allowing the capsule morphology to be predicted. In this work we explore the effect of surfactant chain length on capsule morphology using poly(methyl methacrylate) as the polymer and hexadecane as the core. We compared the predicted morphologies obtained using the polymer as a solid, and the polymer dissolved in dichloromethane to represent the point at which capsule formation begins. We found that using the polymer in its final, solid form gave predictions which were more consistent with our observations. The method was applied to successfully predict the capsule morphologies obtained when commercial fragrance oils were encapsulated.
Publisher: Royal Society of Chemistry (RSC)
Date: 2022
DOI: 10.1039/D1SE01966J
Abstract: A new cobalt( ii ) coordination complex, with two widely separated cobalt-centred redox processes, has been prepared and investigated as an energy storage material for bipolar redox flow batteries.
Location: Australia
Location: United Kingdom of Great Britain and Northern Ireland
Location: United Kingdom of Great Britain and Northern Ireland
Location: United Kingdom of Great Britain and Northern Ireland
Start Date: 2016
End Date: 2017
Funder: University of Queensland
View Funded Activity