Publication
Tube‐type plasma‐enhanced atomic layer deposition of aluminum oxide: Enabling record lab performance for the industry with demonstrated cell efficiencies >24%
Publisher:
Wiley
Date:
16-07-2022
DOI:
10.1002/PIP.3607
Abstract: In this work, single‐side aluminum oxide (Al 2 O 3 ) deposition enabled by a new tube‐type industrial plasma‐assisted atomic layer deposition (PEALD) technique is presented to meet the increasingly stringent requirements for high‐efficiency solar cell mass production. Extremely low emitter saturation current densities, J 0e , down to 15 fA/cm 2 are achieved on an industrial textured boron emitter with a sheet resistance of 104 Ω/sq, passivated by PEALD Al 2 O 3 /PECVD SiN x stack after firing. An implied open‐circuit voltage of up to 721 mV is obtained on symmetrical lifetime s les. The underlying passivation mechanisms of this new tube‐type PEALD Al 2 O 3 are investigated by contactless corona‐voltage measurements. The results indicate that the superior passivation is mainly attributed to a low interface defect density down to 1.1 × 10 11 cm −2 eV −1 and a high negative fixed charge density up to 4.5 × 10 12 cm −2 . Simulations show that the obtained J 0e is close to its intrinsic limit. Lastly, the developed tube‐type PEALD Al 2 O 3 is applied to industrial TOPCon solar cells achieving an average cell efficiency above 24% and a maximum V oc of 707 mV. This work shows that the record level of surface passivation available from lab‐scale PEALD reactors is now available in a flexible high‐throughput industrial PEALD platform, which opens a new route for mass production of high‐efficiency industrial TOPCon solar cells with a lean process at low costs.