ORCID Profile
0000-0002-2403-5772
Current Organisations
Woolcock Institute of Medical Research
,
BRAC University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Springer Science and Business Media LLC
Date: 14-02-2023
Publisher: Research Square Platform LLC
Date: 30-11-2022
DOI: 10.21203/RS.3.RS-2153045/V1
Abstract: ABSTRACT To simulate the deposition of drugs in the oro-pharynx region, several in vitro models are available such as the United States Pharmacopeia-Induction Port (USP-IP) throat and the Virginia Commonwealth University (VCU) models. However, currently, there is no such in vitro model that incorporates a biological barrier to elucidate drug transport across the pharyngeal cells. Cellular models such as in vitro air-liquid interface (ALI) models of human respiratory epithelial cell lines are extensively used to study drug transport. To date, no studies have yet been performed to optimise the ALI culture conditions of the human pharyngeal cell line Detroit 562 and determine whether it could be used for drug transport. Therefore, this study aimed to develop a novel 3-D printed throat model integrated with an ALI cellular model of Detroit 562 cells and optimise the culture conditions to investigate whether the combined model could be used to study drug transport, using Lidocaine as a model drug. Differentiating characteristics specific to airway epithelia were assessed using 3 seeding densities (30,000, 60,000, and 80,000 cells/well (c/w), respectively) over 21 days. The results showed that Detroit 562 cells completely differentiates on day 18 of ALI for both 60,000 and 80,000 c/w with significant mucus production, showing response to bacterial and viral stimuli and development of functional tight junctions and Lidocaine transport with no significant differences observed between the ALI models with the 2 cell seeding densities. Results showed the suitability of the Low density (60,000 c/w or 1.8 × 10 5 cells/cm 2 ) ALI model to study drug transport. Importantly, the developed novel 3-D printed throat model integrated with our optimised in vitro Detroit 562 ALI model showed transport of Lidocaine throat spray. Overall, the study highlights the potential of the novel 3-D printed bio-throat integrated model as a promising in vitro system to investigate the transport of inhalable drug therapies targeted at the oro-pharyngeal region.
Publisher: Elsevier BV
Date: 08-2022
DOI: 10.1016/J.IJPHARM.2022.121989
Abstract: This study aims to investigate the effect of physicochemical properties and aerosol performance of two (2FN) and three-fluid nozzles (3FN) on the inhalable co-formulation of tobramycin and diclofenac dry powders. Combination formulations of tobramycin and diclofenac at 2:1 and 4:1 w/w ratios were prepared at a laboratory scale using a spray dryer in conjunction with a 2FN or 3FN. Powder size, morphology, solid-state characteristics, and aerodynamic and dissolution properties were characterised. The nozzle types and the formulation composition influenced the yield, particle size, solid-state properties, aerosolization behaviour and dissolution of the co-spray dried formulations. In particular, using the 2FN the co-spray dried formulation of tobramycin and diclofenac at 2:1 w/w showed smaller particle size (D50, 3.01 ± 0.06 μm), high fine particle fractions (FPF) (61.1 ± 3.6% for tobramycin and 65.92 ± 3 for diclofenac) and faster dissolution with approx. 70% diclofenac released within 3 h and approx. 90% tobramycin was released within 45 min. However, the 3FN for the co-spray dried formulation of tobramycin and diclofenac at a 2:1 w/w ratio showed a larger particle size (D50, 3.42 ± 0.02 μm), lower FPF (40.6 ± 3.4% for tobramycin and 36.9 ± 0.84 for diclofenac) and comparative slower dissolution with approx. 60% diclofenac was released within 3 h and 80% tobramycin was released within 45 min. A similar trend was observed when the tobramycin to diclofenac ratio was increased to 4:1 w/w. Overall results suggest that spray drying with 2FN showed a superior and viable approach to producing excipients-free inhalable co-spray dried formulations of tobramycin and diclofenac. However, the formulation produced using the 3FN showed higher enrichment of hydrophobic diclofenac and an ability to control the tobramycin drug release in vitro.
Publisher: Elsevier BV
Date: 11-2020
Publisher: Informa UK Limited
Date: 28-11-2018
Publisher: Elsevier BV
Date: 07-2021
Publisher: Elsevier BV
Date: 03-2021
Location: United Kingdom of Great Britain and Northern Ireland
No related grants have been discovered for Zara Sheikh.