ORCID Profile
0000-0002-6558-5412
Current Organisation
Monash University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
In Research Link Australia (RLA), "Research Topics" refer to ANZSRC FOR and SEO codes. These topics are either sourced from ANZSRC FOR and SEO codes listed in researchers' related grants or generated by a large language model (LLM) based on their publications.
Regenerative Medicine (incl. Stem Cells and Tissue Engineering) | Biomaterials | Biomedical Engineering | Cellular Interactions (incl. Adhesion, Matrix, Cell Wall) | Nanomanufacturing | Medical Biotechnology | Logistics and Supply Chain Management | Nanotechnology | Regenerative medicine (incl. stem cells) | Nanomanufacturing | Nanotechnology | Nanobiotechnology | Nanobiotechnology
Expanding Knowledge in the Biological Sciences | Expanding Knowledge in Engineering | Expanding Knowledge in the Medical and Health Sciences | Expanding Knowledge in Technology | Technological and Organisational Innovation | Human Pharmaceutical Products not elsewhere classified |
Publisher: Elsevier BV
Date: 11-2017
DOI: 10.1016/J.JMBBM.2017.07.015
Abstract: Synthetic scaffolds are a highly promising new approach to replace both autografts and allografts to repair and remodel damaged bone tissue. Biocompatible porous titanium scaffold was manufactured through a powder metallurgy approach. Magnesium powder was used as space holder material which was compacted with titanium powder and removed during sintering. Evaluation of the porosity and mechanical properties showed a high level of compatibility with human cortical bone. Interconnectivity between pores is higher than 95% for porosity as low as 30%. The elastic moduli are 44.2GPa, 24.7GPa and 15.4GPa for 30%, 40% and 50% porosity s les which match well to that of natural bone (4-30GPa). The yield strengths for 30% and 40% porosity s les of 221.7MPa and 117MPa are superior to that of human cortical bone (130-180MPa). In-vitro cell culture tests on the scaffold s les using Human Mesenchymal Stem Cells (hMSCs) demonstrated their biocompatibility and indicated osseointegration potential. The scaffolds allowed cells to adhere and spread both on the surface and inside the pore structures. With increasing levels of porosity/interconnectivity, improved cell proliferation is obtained within the pores. It is concluded that s les with 30% porosity exhibit the best biocompatibility. The results suggest that porous titanium scaffolds generated using this manufacturing route have excellent potential for hard tissue engineering applications.
Publisher: Elsevier BV
Date: 06-2022
DOI: 10.1016/J.ACTBIO.2022.04.028
Abstract: Tendons are integral to our daily lives by allowing movement and locomotion but are frequently injured, leading to patient discomfort and impaired mobility. Current clinical procedures are unable to fully restore the native structure of the tendon, resulting in loss of full functionality, and the weakened tissue following repair often re-ruptures. Tendon tissue engineering, involving the combination of cells with biomaterial scaffolds to form new tendon tissue, holds promise to improve patient outcomes. A key requirement for efficacy in promoting tendon tissue formation is the optimal differentiation of the starting cell populations, most commonly adult tissue-derived mesenchymal stem/stromal cells (MSCs), into tenocytes, the predominant cellular component of tendon tissue. Currently, a lack of consensus on the protocols for effective tenogenic differentiation is h ering progress in tendon tissue engineering. In this review, we discuss the current state of knowledge regarding human stem cell differentiation towards tenocytes and tendon tissue formation. Tendon development and healing mechanisms are described, followed by a comprehensive overview of the current protocols for tenogenic differentiation, including the effects of biochemical and biophysical cues, and their combination, on tenogenesis. Lastly, a synthesis of the key features of these protocols is used to design future approaches. The holistic evaluation of current knowledge should facilitate and expedite the development of efficacious stem cell tenogenic differentiation protocols with future impact in tendon tissue engineering. STATEMENT OF SIGNIFICANCE: The lack of a widely-adopted tenogenic differentiation protocol has been a major hurdle in the tendon tissue engineering field. Building on current knowledge on tendon development and tendon healing, this review surveys peer-reviewed protocols to present a holistic evaluation and propose a pathway to facilitate and expedite the development of a consensus protocol for stem cell tenogenic differentiation and tendon tissue engineering.
Publisher: American Chemical Society (ACS)
Date: 03-10-2019
Publisher: Wiley
Date: 05-02-2018
DOI: 10.1002/JBM.B.34060
Abstract: We describe a new fabrication strategy for production of porous titanium scaffolds for skeletal implants which provides a promising new approach to repair and remodel damaged bone tissue. The new strategy involves powder sintering of titanium powder, employing pharmaceutical sugar pellets as temporary space holders, to facilitate production of porous scaffolds with structures optimized for mechanical performance and osseointegration of implants. The spherical sugar pellets, with controlled size fractions and excellent biocompatibility, are easily removed by dissolution prior to sintering providing an ideal space holder material for controlled synthesis of titanium scaffolds with desired porosities and pore sizes. The scaffolds contain pores with high degrees of sphericity and interconnectivity which impart excellent mechanical properties and superior biocompatibility to the structures. Scaffolds with 40% porosity and a pore size range of 300-425 µm exhibited an effective Young's modulus of 16.4 ± 3.5 GPa and strength of 176 ± 6 MPa, which closely mimics the properties of human bone, and were also able to support cell adhesion, viability and spreading in cell culture tests. Porous titanium scaffolds manufactured by this approach have excellent potential for hard tissue engineering applications. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2796-2806, 2018.
Publisher: Elsevier BV
Date: 04-2023
Publisher: Elsevier BV
Date: 11-2023
Publisher: The Company of Biologists
Date: 15-01-2012
DOI: 10.1242/JCS.087916
Abstract: Mesenchymal stem cells (MSCs) have attracted great interest in recent years for tissue engineering and regenerative medicine applications due to their ease of isolation and multipotent differentiation capacity. In the past, MSC research has focussed on the effects of soluble cues, such as growth factors and cytokines however, there is now increasing interest in understanding how parameters such as substrate modulus, specific extracellular matrix (ECM) components and the ways in which these are presented to the cell can influence MSC properties. Here we use surfaces of self-assembled maleimide-functionalized polystyrene-block-poly(ethylene oxide) copolymers (PS-PEO-Ma) to investigate how the spatial arrangement of cell adhesion ligands affects MSC behaviour. By changing the ratio of PS-PEO-Ma in mixtures of block copolymer and polystyrene homopolymer, we can create surfaces with lateral spacing of the PEO-Ma domains ranging from 34 to 62 nm. Through subsequent binding of cysteine–GRGDS peptides to the maleimide-terminated end of the PEO chains in each of these domains, we are able to present tailored surfaces of controlled lateral spacing of RGD (arginine-glycine-aspartic acid) peptides to MSCs. We demonstrate that adhesion of MSCs to the RGD-functionalized block-copolymer surfaces is through specific attachment to the presented RGD motif and that this is mediated by α5, αV, β1 and β3 integrins. We show that as the lateral spacing of the peptides is increased, the ability of the MSCs to spread is diminished and that the morphology changes from well-spread cells with normal fibroblastic morphology and defined stress-fibres, to less-spread cells with numerous cell protrusions and few stress fibres. In addition, the ability of MSCs to form mature focal adhesions is reduced on substrates with increased lateral spacing. Finally, we investigate differentiation and use qRT-PCR determination of gene expression levels and a quantitative alkaline phosphatase assay to show that MSC osteogenesis is reduced on surfaces with increased lateral spacing while adipogenic differentiation is increased. We show here, for the first time, that the lateral spacing of adhesion peptides affects human MSC (hMSC) properties and might therefore be a useful parameter with which to modify hMSC behaviour in future tissue engineering strategies.
Publisher: Mary Ann Liebert Inc
Date: 08-2010
Publisher: Elsevier BV
Date: 09-2011
DOI: 10.1016/J.BIOMATERIALS.2011.04.003
Abstract: Human mesenchymal stem cells (hMSCs) are capable of probing and responding to the mechanical properties of their substrate. Although most biological and synthetic matrices are viscoelastic materials, previous studies have primarily focused upon substrate compressive modulus (rigidity), neglecting the relative contributions that the storage (elastic) and loss (viscous) moduli make to the summed compressive modulus. In this study we aimed to isolate and identify the effects of the viscous component of a substrate on hMSC behaviour. Using a polyacrlyamide gel system with constant compressive modulus and varying loss modulus we determined that changes to substrate loss modulus substantially affected hMSC morphology, proliferation and differentiation potential. In addition, we showed that the effect of substrate loss modulus on hMSC behaviour is due to a reduction in both passive and actively generated isometric cytoskeletal tension caused by the inherent creep of substrates with a high loss modulus. These findings highlight substrate creep, or more explicitly substrate loss modulus, as an important mechanical property of a biomaterial system that can be tailored to encourage the growth and differentiation of specific cell types.
Publisher: Frontiers Media SA
Date: 16-05-2019
Publisher: Elsevier BV
Date: 12-2021
DOI: 10.1016/J.BIOMATERIALS.2021.121214
Abstract: Injectable hydrogels have been employed extensively as versatile materials for cartilage regeneration due to their excellent biocompatibility, tunable structure, and ability to accommodate bioactive factors, as well as their ability to be locally delivered via minimally invasive injection to fill irregular defects. More recently, in vitro and in vivo studies have revealed that processing these materials to produce cell-laden microgels can enhance cell-cell and cell-matrix interactions and boost nutrient and metabolite exchange. Moreover, these studies have demonstrated gene expression profiles and matrix regeneration that are superior compared to conventional injectable bulk hydrogels. As cell-laden microgels and their application in cartilage repair are moving closer to clinical translation, this review aims to present an overview of the recent developments in this field. Here we focus on the currently used biomaterials and crosslinking strategies, the innovative fabrication techniques being used for the production of microgels, the cell sources used, the signals used for induction of chondrogenic differentiation and the resultant biological responses, and the ability to create three-dimensional, functional cartilage tissues. In addition, this review also covers the current clinical approaches for repairing cartilage as well as specific challenges faced when attempting the regeneration of damaged cartilage tissue. New findings related to the macroporous nature of the structures formed by the assembled microgel building blocks and the novel use of microgels in 3D printing for cartilage tissue engineering are also highlighted. Finally, we outline the challenges and future opportunities for employing cell-laden microgels in clinical applications.
Publisher: Elsevier BV
Date: 09-2023
Publisher: Wiley
Date: 30-10-2019
Publisher: Springer Science and Business Media LLC
Date: 25-02-2016
DOI: 10.1038/SREP21820
Abstract: We introduce “sense, track and separate” approach for the removal of Hg 2+ ion from aqueous media using highly ordered and magnetic mesoporous ferrosilicate nanocages functionalised with rhodamine fluorophore derivative. These functionalised materials offer both fluorescent and magnetic properties in a single system which help not only to selectively sense the Hg 2+ ions with a high precision but also adsorb and separate a significant amount of Hg 2+ ion in aqueous media. We demonstrate that the magnetic affinity of these materials, generated from the ultrafine γ-Fe 2 O 3 nanoparticles present inside the nanochannels of the support, can efficiently be used as a fluorescent tag to sense the Hg 2+ ions present in NIH3T3 fibroblasts live cells and to track the movement of the cells by external magnetic field monitored using confocal fluorescence microscopy. This simple approach of introducing multiple functions in the magnetic mesoporous materials raise the prospect of creating new advanced functional materials by fusing organic, inorganic and biomolecules to create advanced hybrid nanoporous materials which have a potential use not only for sensing and the separation of toxic metal ions but also for cell tracking in bio-separation and the drug delivery.
Publisher: Elsevier
Date: 2021
Publisher: Mary Ann Liebert Inc
Date: 2010
Abstract: Human mesenchymal stromal cells (hMSCs) have generated significant interest due to their potential use in clinical applications. hMSCs are present at low frequency in vivo, but after isolation can be expanded considerably, generating clinically useful numbers of cells. In this study, we demonstrate the use of a defined embryonic stem cell expansion medium, mTeSR (Stem Cell Technologies), for the expansion of bone-marrow-derived hMSCs. The hMSCs grow at comparable rates, demonstrate tri-lineage differentiation potential, and show similar surface marker profiles (CD29(+), CD44(+), CD49a(+), CD73(+), CD90(+), CD105(+), CD146(+), CD166(+), CD34(-), and CD45(-)) in both the fetal bovine serum (FBS)-supplemented medium and mTeSR. However, expression of early differentiation transcription factors runt-related transcription factor 2, sex-determining region Y box 9, and peroxisome proliferator-activated receptor gamma changed significantly. Both runt-related transcription factor 2 and sex-determining region Y box 9 were upregulated, whereas peroxisome proliferator-activated receptor gamma was downregulated in mTeSR compared with FBS. Although osteogenic and chondrogenic differentiation was comparable in cells grown in mTeSR compared to FBS, adipogenic differentiation was significantly decreased in mTeSR-expanded cells, both in terms of gene expression and absolute numbers of adipocytes. The removal of the FBS from the medium and the provision of a defined medium with disclosed composition make mTeSR a superior study platform for hMSC biology in a controlled environment. Further, this provides a key step toward generating a clinical-grade medium for expansion of hMSCs for clinical applications that rely on osteo- and chondroinduction of MSCs, such as bone repair and cartilage generation.
Publisher: Mary Ann Liebert Inc
Date: 10-2011
Publisher: Royal Society of Chemistry (RSC)
Date: 2020
DOI: 10.1039/C9BM01524H
Abstract: The encapsulation of cells into microgels is attractive for applications in tissue regeneration.
Publisher: American Chemical Society (ACS)
Date: 03-10-2019
Abstract: The ability of mesenchymal stem cells to sense nanoscale variations in extracellular matrix (ECM) compositions in their local microenvironment is crucial to their survival and their fate however, the underlying molecular mechanisms defining how such fates are temporally modulated remain poorly understood. In this work, we have utilized self-assembled block copolymer surfaces to present nanodomains of an adhesive peptide found in many ECM proteins at different lateral spacings (from 30 to 60 nm) and studied the temporal response (2 h to 14 days) of human mesenchymal stem cells (hMSCs) using a panel of real-time localization and activity biosensors. Our findings revealed that within the first 4 to 24 h postadhesion and spreading, hMSCs on smaller nanodomain spacings recruit more activated FAK and Src proteins to produce larger, longer-lived, and increased numbers of focal adhesions (FAs). The adhesions formed on smaller nanospacings rapidly recruit higher amounts of nonmuscle myosin IIA and vinculin and experience tension forces (by >5 pN/FA) significantly higher than those observed on larger nanodomain spacings. The transmission of higher levels of tension into the cytoskeleton at short times was accompanied by higher Rac1, cytosolic β-catenin, and nuclear localization of YAP/TAZ and RUNX2, which together biased the commitment of hMSCs to an osteogenic fate. This investigation provides mechanistic insights to confirm that smaller lateral spacings of adhesive nanodomains alter hMSC mechanosensing and biases mechanotransduction at short times
Publisher: American Chemical Society (ACS)
Date: 03-01-2021
Publisher: Frontiers Media SA
Date: 14-02-2022
DOI: 10.3389/FCELL.2022.819726
Abstract: Therapeutic benefits of mesenchymal stem cells (MSCs) are now widely believed to come from their paracrine signalling, i.e. secreted factors such as cytokines, chemokines, and extracellular vesicles (EVs). Cell-free therapy using EVs is an active and emerging field in regenerative medicine. Typical 2D cultures on tissue culture plastic is far removed from the physiological environment of MSCs. The application of 3D cell culture allows MSCs to adapt to their cellular environment which, in turn, influences their paracrine signalling activity. In this study we evaluated the impact of 3D MSCs culture on EVs secretion, cargo proteome composition, and functional assessment in immunomodulatory, anti-inflammatory and anti-fibrotic properties. MSC-EVs from 2D and 3D cultures expressed classical EV markers CD81, CD63, and CD9 with particle diameter of & nm. There were distinct changes in immunomodulatory potencies where 3D cultures exhibited reduced indoleamine 2,3-dioxygenase (IDO) activity and significantly reduced macrophage phagocytosis. Administration of 2D and 3D EVs following double dose bleomycin challenge in aged mice showed a marked increase of bodyweight loss in 3D group throughout days 7–28. Histopathological observations of lung tissues in 3D group showed increased collagen deposition, myofibroblast differentiation and leukocytes infiltrations. Assessment of lung mechanics showed 3D group did not improve lung function and instead exhibited increased resistance and tissue d ing. Proteome profiling of MSC-EV composition revealed molecular enrichment of EV markers (compared to parental cells) and differential proteome between EVs from 2D and 3D culture condition associated with immune-based and fibrosis/extracellular matrix/membrane organization associated function. This study provides insight into distinct variation in EV protein composition dependent on the cellular microenvironment of the parental cells, which could have implications in their therapeutic effect and potency. Overall, this work suggests that EVs produced from 3D MSC cultures did not enhance typical MSC-EV properties expected from 2D cultures (immunomodulation, anti-fibrotic, anti-inflammatory). The outcome highlights critical differences between MSC-EVs obtained from different culture microenvironments, which should be considered when scaling up MSC culture for clinical manufacturing.
Publisher: S. Karger AG
Date: 2008
DOI: 10.1159/000127448
Publisher: Wiley
Date: 29-01-2021
Abstract: Cells are able to perceive complex mechanical cues from their microenvironment, which in turn influences their development. Although the understanding of these intricate mechanotransductive signals is evolving, the precise roles of substrate microtopography in directing cell fate is still poorly understood. Here, UV nanoimprint lithography is used to generate micropillar arrays ranging from 1 to 10 µm in height, width, and spacing to investigate the impact of microtopography on mechanotransduction. Using mesenchymal stem cells (MSCs) as a model, stark pattern‐specific changes in nuclear architecture, lamin A/C accumulation, chromatin positioning, and DNA methyltransferase expression, are demonstrated. MSC osteogenesis is also enhanced specifically on micropillars with 5 µm width/spacing and 5 µm height. Intriguingly, the highest degree of osteogenesis correlates with patterns that stimulated maximal nuclear deformation which is shown to be dependent on myosin‐II‐generated tension. The outcomes determine new insights into nuclear mechanotransduction by demonstrating that force transmission across the nuclear envelope can be modulated by substrate topography, and that this can alter chromatin organisation and impact upon cell fate. These findings have potential to inform the development of microstructured cell culture substrates that can direct cell mechanotransduction and fate for therapeutic applications in both research and clinical sectors.
Publisher: Wiley
Date: 21-04-2022
Abstract: Cells can perceive complex mechanical cues across both the micro‐ and nanoscale which can influence their development. While causative effects between surface topography and cellular function can be demonstrated, the variability in materials used in this screening process makes it difficult to discern whether the observed phenotypic changes are indeed a result of topographical cues alone or the inherent difference in material properties. A novel approach to directly imprint micro‐ and nanoscaled topographical features into the base of conventional cell cultureware is thus developed, facilitating its compatibility with standard biological techniques and methods of analysis. The utility of this technology is demonstrated by performing high‐throughput screening across five distinct cell types to interrogate the effects of 12 surface topographies, exemplifying unique cell‐specific responses to both behavior and cell morphological characteristics. The ability of this technology to underpin new insights into how surface topographies can regulate key image descriptors to drive cell fate determination is further demonstrated. These findings will inform the future development of advanced micro‐ and nanostructured cell culture substrates that can regulate cell behavior and fate determination across the life sciences, including fundamental cell biology, drug screening, and cell therapy.
Publisher: Elsevier BV
Date: 04-2020
Publisher: Elsevier BV
Date: 09-2018
DOI: 10.1016/J.ACTBIO.2018.07.015
Abstract: Current clinical approaches to treat articular cartilage degeneration provide only a limited ability to regenerate tissue with long-term durability and functionality. In this application, injectable bulk hydrogels and microgels containing stem cells can provide a suitable environment for tissue regeneration. However insufficient cell-cell interactions, low differentiation efficiency and poor tissue adhesion hinder the formation of high-quality hyaline type cartilage. Here, we have designed a higher order tissue-like structure using injectable cell-laden microgels as the building blocks to achieve human bone marrow-derived mesenchymal stem cell (hBMSC) long-term maintenance and chondrogenesis. We have demonstrated that a 4-arm poly(ethylene glycol)-N-hydroxysuccinimide (NHS) crosslinker induces covalent bonding between the microgel building blocks as well as the surrounding tissue mimic. The crosslinking process assembles the microgels into a 3D construct and preserves the viability and cellular functions of the encapsulated hBMSCs. This assembled microgel construct encourages upregulation of chondrogenic markers in both gene and glycosaminoglycan (GAG) expression levels. In addition, the regenerated tissue in the assembled microgels stained positively with Alcian blue and Safranin O exhibiting unique hyaline-like cartilage features. Furthermore, the immunostaining showed a favourable distribution and significantly higher content of type II collagen in the assembled microgels when compared to both the bulk hydrogel and pellet cultures. Collectively, this tissue adhesive hBMSC-laden microgel construct provides potential clinical opportunities for articular cartilage repair and other applications in regenerative medicine. A reliable approach to reconstruct durable and fully functional articular cartilage tissue is required for effective clinical therapies. Here, injectable hydrogels together with cell-based therapies offer new treatment strategies in cartilage repair. For effective cartilage regeneration, the injectable hydrogel system needs to be bonded to the surrounding tissue and at the same time needs to be sufficiently stable for prolonged chondrogenesis. In this work, we utilised injectable hBMSC-laden microgels as the building blocks to create an assembled construct via N-hydroxysuccinimide-amine coupling. This crosslinking process also allows for rapid bonding between the assembled microgels and a surrounding tissue mimic. The resultant assembled microgel-construct provides both a physically stable and biologically dynamic environment for hBMSC chondrogenesis, leading to the production of a mature hyaline type cartilage structure.
Publisher: American Chemical Society (ACS)
Date: 19-05-2021
Publisher: Wiley
Date: 04-11-2018
DOI: 10.1002/POLA.29267
Publisher: American Chemical Society (ACS)
Date: 03-10-2023
Publisher: American Vacuum Society
Date: 11-2022
DOI: 10.1116/6.0002034
Abstract: The ability to create complex three-dimensional cellular models that can effectively replicate the structure and function of human organs and tissues in vitro has the potential to revolutionize medicine. Such models could facilitate the interrogation of developmental and disease processes underpinning fundamental discovery science, vastly accelerate drug development and screening, or even be used to create tissues for implantation into the body. Realization of this potential, however, requires the recreation of complex biochemical, biophysical, and cellular patterns of 3D tissues and remains a key challenge in the field. Recent advances are being driven by improved knowledge of tissue morphogenesis and architecture and technological developments in bioengineering and materials science that can create the multidimensional and dynamic systems required to produce complex tissue microenvironments. In this article, we discuss challenges for in vitro models of tissues and organs and summarize the current state-of-the art in biomaterials and bioengineered systems that aim to address these challenges. This includes both top-down technologies, such as 3D photopatterning, magnetism, acoustic forces, and cell origami, as well as bottom-up patterning using 3D bioprinting, microfluidics, cell sheet technology, or composite scaffolds. We illustrate the varying ways that these can be applied to suit the needs of different tissues and applications by focussing on specific ex les of patterning the bone-tendon interface, kidney organoids, and brain cancer models. Finally, we discuss the challenges and future prospects in applying materials science and bioengineering to develop high-quality 3D tissue structures for in vitro studies.
Publisher: Elsevier BV
Date: 12-2013
DOI: 10.1016/J.BIOMATERIALS.2013.08.072
Abstract: Intervertebral disc (IVD) degeneration is one of the leading causes of lower back pain and a major health problem worldwide. Current surgical treatments include excision or immobilisation, with neither approach resulting in the repair of the degenerative disc. As such, a tissue engineering-based approach in which stem cells, coupled with an advanced delivery system, could overcome this deficiency and lead to a therapy that encourages functional fibrocartilage generation in the IVD. In this study, we have developed an injectable hydrogel system based on enzymatically-crosslinked polyethylene glycol and hyaluronic acid. We examined the effects of adding pentosan polysulphate (PPS), a synthetic glycosaminoglycan-like factor that has previously been shown (in vitro and in vivo) to this gel system in order to induce chondrogenesis in mesenchymal precursor cells (MPCs) when added as a soluble factor, even in the absence of additional growth factors such as TGF-β. We show that both the gelation rate and mechanical strength of the resulting hydrogels can be tuned in order to optimise the conditions required to produce gels with the desired combination of properties for an IVD scaffold. Human immunoselected STRO-1+ MPCs were then incorporated into the hydrogels. They were shown to retain good viability after both the initial formation of the gel and for longer-term culture periods in vitro. Furthermore, MPC/hydrogel composites formed cartilage-like tissue which was significantly enhanced by the incorporation of PPS into the hydrogels, particularly with respect to the deposition of type-II-collagen. Finally, using a wild-type rat subcutaneous implantation model, we examined the extent of any immune reaction and confirmed that this matrix is well tolerated by the host. Together these data provide evidence that such a system has significant potential as both a delivery vehicle for MPCs and as a matrix for fibrocartilage tissue engineering applications.
Publisher: Springer International Publishing
Date: 2019
Publisher: Public Library of Science (PLoS)
Date: 23-12-2013
Publisher: American Chemical Society (ACS)
Date: 06-03-2017
Abstract: Stem cell injections for the treatment of articular cartilage damage are a promising approach to achieve tissue regeneration. However, this method is encumbered by high cell apoptosis rates, low retention in the cartilage lesion, and inefficient chondrogenesis. Here, we have used a facile, very low cost-based microfluidic technique to create visible light-cured microgels composed of gelatin norbornene (GelNB) and a poly(ethylene glycol) (PEG) cross-linker. In addition, we have demonstrated that the process enables the rapid in situ microencapsulation of human bone marrow-derived mesenchymal stem cells (hBMSCs) under biocompatible microfluidic-processing conditions for long-term maintenance. The hBMSCs exhibited an unusually high degree of chondrogenesis in the GelNB microgels with chondro-inductive media, specifically toward the hyaline cartilage structure, with significant upregulation in type II collagen expression compared to the bulk hydrogel and "gold standard" pellet culture. Overall, we have demonstrated that these protein-based microgels can be engineered as promising therapeutic candidates for articular cartilage regeneration, with additional potential to be used in a variety of other applications in regenerative medicine.
Publisher: Mary Ann Liebert Inc
Date: 09-2012
Publisher: Mary Ann Liebert Inc
Date: 15-12-2014
Publisher: Oxford University Press (OUP)
Date: 29-05-2014
Abstract: In recent years, the role of miRNAs in post-transcriptional gene regulation has come to the fore with strong evidence to indicate an important role for microRNAs (miRNAs) in the regulation of a wide range of fundamental biological processes. Notably, this includes the regulation of both endogenous tissue repair mechanisms and the growth and differentiation of stem cells (both adult and pluripotent). As a result, manipulation of miRNA signaling holds great promise for regenerative medicine, which aims to harness either endogenous or implanted cells to promote tissue repair. However, to fully realize this potential, it will be necessary to combine advances in our biological understanding with new technologies that allow precise spatiotemporal modulation of specific miRNA candidates. In this review, we highlight the role of miRNAs in tissue regeneration, discuss key challenges in translating this knowledge to the clinic, and outline recent technological advances that aim to address these issues. By combining a comprehensive knowledge of miRNA biology with cutting-edge delivery technologies, it is clear that miRNAs hold significant promise for tissue regenerative therapies in the future.
Publisher: Elsevier BV
Date: 02-2014
DOI: 10.1016/J.BIOMATERIALS.2013.11.023
Abstract: Cell behaviours within tissues are influenced by a broad array of physical and biochemical microenvironmental factors. Whilst 'stiffness' is a recognised physical property of substrates and tissue microenvironments that influences many cellular behaviours, tissues and their extracellular matrices are not purely rigid but 'viscoelastic' materials, composed of both rigid-like (elastic) and dissipative (viscous) elements. This viscoelasticity results in materials displaying increased deformation with time under the imposition of a defined force or stress, a phenomenon referred to as time-dependent deformation or 'creep'. Previously, we compared the behaviour of human mesenchymal stem cells (hMSCs) on hydrogels tailored to have a constant stiffness, but to display varying levels of creep in response to an applied force. Using polyacrylamide as a model material, we showed that on high-creep hydrogels (HCHs), hMSCs displayed increased proliferation, spread area and differentiation towards multiple lineages, compared to their purely stiff analogue, with a particular propensity for differentiation towards a smooth muscle cell (SMC) lineage. In this present study, we investigate the mechanisms behind this phenomenon and show that hMSCs adhered to HCHs have increased expression of SMC induction factors, including soluble factors, ECM proteins and the cell-cell adhesion molecule, N-Cadherin. Further, we identify a key role for Rac1 signalling in mediating this increased N-Cadherin expression. Using a real-time Rac1-FRET biosensor, we confirm increased Rac1 activation on HCHs, an observation that is further supported functionally by observed increases in motility and lamellipodial protrusion rates of hMSCs. Increased Rac1 activity in hMSCs on HCHs provides underlying mechanisms for enhanced commitment towards a SMC lineage and the compensatory increase in spread area (isotonic tension) after a creep-induced loss of cytoskeletal tension on viscoelastic substrates, in contrast to previous studies that have consistently demonstrated up-regulation of RhoA activity with increasing substrate stiffness. Tuning substrate viscoelasticity to introduce varying levels of creep thus equips the biomaterial scientist or engineer with a new tool with which to tune and direct stem cell outcomes.
Publisher: Elsevier BV
Date: 11-2010
DOI: 10.1016/J.BIOMATERIALS.2010.07.007
Abstract: As strategies for manipulating cellular behaviour in vitro and in vivo become more sophisticated, synthetic biomaterial substrates capable of reproducing critical biochemical and biophysical properties (or cues) of tissue micro-environments will be required. Cytoskeletal tension has been shown to be highly deterministic of cell fate decisions, yet few synthetic biomaterials are capable of modulating cytoskeletal tension of adhered cells through variations in stiffness, at least in the ranges applicable to tissue properties (e.g., 1-100 kPa), whilst also possessing other required properties, such as biodegradability, biocompatibility and processability. In this paper we describe a non-cytotoxic polymer system based on acrylated polypropylene glycol triol (aPPGT). This new elastomer system has tunable elastic moduli, is degradable, can be easily surface modified and can be manufactured into porous three dimensional scaffolds or micropatterned substrates. We demonstrate that the PPGT substrates can modulate hMSC morphology, growth, and differentiation, and that they can produce similar outcomes as observed for a non-degradable polyacrylamide substrate, confirming their utility as a degradable elastomer for tissue engineering and other biomedical applications.
Publisher: Frontiers Media SA
Date: 29-10-2018
Publisher: Springer Science and Business Media LLC
Date: 17-01-2018
DOI: 10.1038/S41467-017-02486-0
Abstract: Mechanotransduction is a strong driver of mesenchymal stem cell (MSC) fate. In vitro, variations in matrix mechanics invoke changes in MSC proliferation, migration and differentiation. However, when incorporating MSCs within injectable, inherently soft hydrogels, this dominance over MSC response substantially limits our ability to couple the ease of application of hydrogels with efficiently directed MSC differentiation, especially in the case of bone generation. Here, we identify differential miRNA expression in response to varying hydrogel stiffness and RhoA activity. We show that modulation of miR-100-5p and miR-143-3p can be used to bias MSC fate and provide mechanistic insight by demonstrating convergence on mTOR signalling. By modulating these mechanosensitive miRNAs, we can enhance osteogenesis in a soft 3D hydrogel. The outcomes of this study provide new understanding of the mechanisms regulating MSC mechanotransduction and differentiation, but also a novel strategy with which to drive MSC fate and significantly impact MSC-based tissue-engineering applications.
Publisher: Elsevier BV
Date: 2014
DOI: 10.1016/J.BIOMATERIALS.2013.10.056
Abstract: Previous reports in the literature investigating chondrogenesis in mesenchymal progenitor cell (MPC) cultures have confirmed the chondro-inductive potential of pentosan polysulphate (PPS), a highly sulphated semi-synthetic polysaccharide, when added as a soluble component to culture media under standard aggregate-assay conditions or to poly(ethylene glycol)/hyaluronic acid (PEG/HA)-based hydrogels, even in the absence of inductive factors (e.g. TGFβ). In this present study, we aimed to assess whether a 'bound' PPS would have greater activity and availability over a soluble PPS, as a media additive or when incorporated into PEG/HA-based hydrogels. We achieved this by covalently pre-binding the PPS to the HA component of the gel (forming a new molecule, HA-PPS). We firstly investigated the activity of HA-PPS compared to free PPS, when added as a soluble factor to culture media. Cell proliferation, as determined by CCK8 and EdU assay, was decreased in the presence of either bound or free PPS whilst chondrogenic differentiation, as determined by DMMB assay and histology, was enhanced. In all cases, the effect of the bound PPS (HA-PPS) was more potent than that of the unbound form. These results alone suggest wider applications for this new molecule, either as a culture supplement or as a coating for scaffolds targeted at chondrogenic differentiation or maturation. We then investigated the incorporation of HA-PPS into a PEG/HA-based hydrogel system, by simply substituting some of the HA for HA-PPS. Rheological testing confirmed that incorporation of either HA-PPS or PPS did not significantly affect gelation kinetics, final hydrogel modulus or degradation rate but had a small, but significant, effect on swelling. When encapsulated in the hydrogels, MPCs retained good viability and rapidly adopted a rounded morphology. Histological analysis of both GAG and collagen deposition after 21 days showed that the incorporation of the bound-PPS into the hydrogel resulted in increased matrix formation when compared to the addition of soluble PPS to the hydrogel, or the hydrogel alone. We believe that this new generation injectable, degradable hydrogel, incorporating now a covalently bound-PPS, when combined with MPCs, has the potential to assist cartilage regeneration in a multitude of therapeutic targets, including for intervertebral disc (IVD) degeneration.
Publisher: Wiley
Date: 28-05-2018
Publisher: American Chemical Society (ACS)
Date: 03-12-2013
DOI: 10.1021/BM4012562
Abstract: To encourage cell adhesion on biomaterial surfaces in a more facile, safe, and low-cost fashion, we have demonstrated a noncovalent approach to spatially conjugate β-cyclodextrin (β-CD) modified peptide sequences onto self-assembled adamantane-terminated polystyrene-b-poly(ethylene oxide) (PS-PEO-Ada) films through inclusion complexing interactions between β-CDs and adamantane. By simply blending various ratios of unmodified PS-PEO with a newly synthesized PS-PEO-Ada, we produced PS polymer films that displayed well-organized adamantine-decorated cylindrical PEO domains with varying average interdomain spacings ranging from 29 to 47 nm. The presence of the adamantane moiety at the terminal end of the PEO chain permitted rapid, and importantly, oriented attachment of β-CD functionalized peptides onto these surfaces. This one-step process not only converted these proven nonadherent PS-PEO surfaces into adherent surfaces, but also permitted precisely controlled presentation and surface distribution of the conjugated peptides. The utility of these surfaces as cell culture substrates was confirmed with human mesenchymal stem cells (hMSCs). We observed that with increasing PS-PEO-Ada content in the PEO cylindrical domains, these novel polymer films displayed improved cell attachment and spreading, with notable differences in hMSC morphology. We further confirmed that this novel PS-PEO-Ada surface provides a flexible platform for facile conjugation of mixtures of β-CDs functionalized with different peptides, specifically RGD and IKVAV peptides. The cell adhesion and spreading assays on these surfaces indicated that the morphologies of hMSCs can be easily manipulated, while no significant changes in cell attachment were observed. The lock-and-key peptide conjugation technique presented in this work is applicable to any substrate that incorporates a moiety capable of forming inclusion complexes with α-, β-, and γ-CDs, providing a facile and flexible method by which to construct peptide-conjugated biomaterial substrates for a multitude of applications in fields ranging from cell bioprocessing and regenerative medicine to cell-based assays.
Publisher: Elsevier
Date: 2013
Publisher: Springer Science and Business Media LLC
Date: 26-05-2016
DOI: 10.1038/SREP26657
Abstract: Thousands of sense-antisense mRNA-lncRNA gene pairs occur in the mammalian genome. While there is usually little doubt about the function of the coding transcript, the function of the lncRNA partner is mostly untested. Here we examine the function of the homeotic Evx1 - Evx1as gene locus. Expression is tightly co-regulated in posterior mesoderm of mouse embryos and in embryoid bodies. Expression of both genes is enhanced by BMP4 and WNT3A, and reduced by Activin. We generated a suite of deletions in the locus by CRISPR-Cas9 editing. We show EVX1 is a critical downstream effector of BMP4 and WNT3A with respect to patterning of posterior mesoderm. The lncRNA, Evx1as arises from alternative promoters and is difficult to fully abrogate by gene editing or siRNA approaches. Nevertheless, we were able to generate a large 2.6 kb deletion encompassing the shared promoter with Evx1 and multiple additional exons of Evx1as. This led to an identical dorsal-ventral patterning defect to that generated by micro-deletion in the DNA-binding domain of EVX1. Thus, Evx1as has no function independent of EVX1, and is therefore unlikely to act in trans . We predict many antisense lncRNAs have no specific trans function, possibly only regulating the linked coding genes in cis .
Publisher: Elsevier
Date: 2022
Publisher: American Chemical Society (ACS)
Date: 25-11-2020
Publisher: Elsevier BV
Date: 2020
DOI: 10.1016/J.ACTBIO.2019.11.016
Abstract: Hydrogels are attractive candidates for use in tissue-engineering and the encapsulation and subsequent differentiation of mesenchymal stem/stromal cells (MSCs) is a strategy that holds great promise for the repair and regeneration of bone and cartilage. However, MSCs are well-known for their sensitivity to mechanical cues, particularly substrate stiffness, and so the inherent softness of hydrogels is poorly matched to the mechanical cues that drive efficient osteogenesis. One approach to overcome this limitation is to harness mechanotransductive signalling pathways and override the signals cells receive from their environment. Previous reports demonstrate that mechanosensitive miRNAs, miR-100-5p and miR-143-3p can enhance MSC osteogenesis, using a complex multi-step procedure to transfect, encapsulate and differentiate the cells. In this study, we develop and characterise a facile system for in situ transfection of MSCs encapsulated within a light-crosslinkable gelatin-PEG hydrogel. Comparing the influence of different transfection agents and hydrogel compositions, we show that particle size, charge, and hydrogel mechanical properties all influence the diffusion of embedded transfection agent complexes. By incorporating both MSCs and transfection agents into the hydrogels we demonstrate successful in situ transfection of encapsulated MSCs. Comparing the efficacy of pre- and in situ transfection of miR-100-5p/miR-143-3p on the osteogenic capacity of hydrogel-encapsulated MSCs, our data demonstrates superior mineralisation and osteogenic gene expression following in situ transfections. Overall, we demonstrate a simple, one-pot system for in situ transfection of miRNAs to enhance MSC osteogenic potential and thus demonstrates significant promise to improve the efficiency of MSC differentiation in hydrogels for bone tissue-engineering applications. STATEMENT OF SIGNIFICANCE: Mesenchymal stromal cells (MSCs) are sensitive to cues from their surrounding microenvironment. Osteogenesis is enhanced in MSCs grown on stiffer substrates, but this is limited when using hydrogels for bone tissue-engineering. Modulating pro-osteogenic genes with mechanosensitive microRNAs (miRNAs) represents a potential tool to overcome this challenge. Here we report a hydrogel platform to deliver miRNAs to encapsulated MSCs. We characterise effects of hydrogel composition and transfection agent type on their mobility and transfection efficiency, demonstrating successful in situ transfection of MSCs and showing that miRNAs can significantly enhance osteogenic mineral deposition and marker gene expression. This system was simpler and more effective than conventional 2D transfection prior to encapsulation and therefore holds promise to improve MSC differentiation in bone tissue-engineering.
Publisher: Cold Spring Harbor Laboratory
Date: 23-07-2019
DOI: 10.1101/712042
Abstract: Hydrogels have many properties that emulate biological tissues and are therefore attractive candidates for use in tissue engineering. In particular the encapsulation and subsequent differentiation of mesenchymal stem/stromal cells (MSCs) is a strategy that holds great promise for the repair and regeneration of bone and cartilage. However, MSCs are well-known for their sensitivity to mechanical cues, particularly substrate stiffness, and so the inherent softness of hydrogels is poorly matched to the mechanical cues that drive efficient osteogenesis. This limits the success of bone tissue engineering using MSCs encapsulated in a hydrogel. One approach to overcome this limitation is to harness mechanotransductive signalling pathways and override the signals cells receive from their environment. Previous reports have shown that the mechanosensitive miRNAs, miR-100-5p and miR-143-3p can enhance MSC osteogenesis, but this required a complex multi-step procedure to transfect, encapsulate and differentiate the cells. In this study, we develop and characterise a facile system for in situ transfection of MSCs encapsulated within a light-crosslinkable gelatin-PEG hydrogel. Comparing the influence of different transfection agents and hydrogel compositions, we determine the factors affecting transfection agent release and MSC transfection, showing that it is possible to transfect MSCs with miRNAs in situ . We then compare the efficacy of both pretransfection and in situ transfection on the osteogenic capacity of hydrogel-encapsulated MSCs, demonstrating superior mineralisation and osteogenic gene expression for in situ transfected s les. Our platform therefore demonstrates a simple, one-pot system for delivery of pro-osteogenic miRNAs and in situ transfection that is able to enhance MSC osteogenic potential without the need of multi-step transfection procedures, thus demonstrating significant promise for bone tissue engineering.
Publisher: Future Medicine Ltd
Date: 03-2011
DOI: 10.2217/RME.11.7
Abstract: The Tissue Engineering and Regenerative Medicine International Society – Asia Pacific (TERMIS-AP) annual meeting was held in Sydney, Australia from 15–17 September 2010 and highlighted the latest developments in tissue engineering and regenerative medicine in the Asia–Pacific region. Several of the plenary lectures focused on the vascularization of tissue engineering constructs, an issue that is critical for the success of larger tissue engineered constructs and was central to the meeting overall. In addition, a wide range of research also presented developments in tissue engineering for a range of body tissues (including cardiac, neural, bone, cartilage, tendon, skeletal muscle and skin), as well as advances in technologies (high-throughput screening and microfluidics). Looking more broadly, the meeting incorporated developments covering the spectrum of fundamental research through to clinical studies, with discussions on how best to direct the scientific advances being made into realistic therapies that could be made widely available in the future. Overall, the meeting highlighted the promise of early strategies, which are now showing promising results in clinical trials, and the development of a strong foundation of research from which future therapies will no doubt be developed.
Publisher: Oxford University Press (OUP)
Date: 19-05-2015
DOI: 10.1039/C4IB00297K
Publisher: IOP Publishing
Date: 08-04-2021
Abstract: 3D bioprinting is a recent technique that can create complex cell seeded scaffolds and therefore holds great promise to revolutionize the biomedical sector by combining materials and structures that more closely mimic the 3D cell environment in tissues. The most commonly used biomaterials for printing are hydrogels, however, many of the hydrogels used still present issues of printability, stability, or poor cell-material interactions. We propose that bioinks with intrinsic self-assembling and shear thinning properties, such as xanthan gum, can be methacrylated (XGMA) and combined with a bio-functional material such as gelatin methacryloyl (GelMa) to create a stable, cell-interactive bioink with improved properties for 3D bioprinting. These biomaterials have reduced viscosity under high shear and recover their viscosity rapidly after the shear is removed, retaining their shape, which translates to easier extrusion whilst maintaining accurate fidelity after printing. This was confirmed in printing studies, with measured normalized strand widths of 1.2 obtained for high gel concentrations (5+5 % XGMA-GelMA). Furthermore, the introduction of a secondary photo-cross-linking method allowed tuning of the mechanical properties of the hydrogel with stiffness between 15 and 30 kPa, as well as improving the stability of the hydrogel with retention of 75 % of its mass after 90 d. The hydrogel was shown to be biocompatible and bio-active with 97 % cell viability, and cell spreading after 7 d of culture for low gel concentrations (3+3 % XGMA-GelMA). Shear stresses were relatively low while printing (1 kPa) as a result of the shear thinning property of the material, which supported cell viability during extrusion. Finally, printed hydrogels retained high cell viability for lower gel concentrations, and showed improved cell viability for more concentrated hydrogels when compared to cells cultured in bulk hydrogels, presumably due to improved nutrient/oxygen diffusion and cell migration. In conclusion, stability and formulation of a XGMA-GelMA shear thinning composite hydrogel has been optimized to create a bio-functional bioink, with improved printability, and in vitro culture stability via secondary photo-induced cross-linking, making this composite a promising bioink for 3D bioprinting.
Publisher: Frontiers Media SA
Date: 10-09-2021
DOI: 10.3389/FCHEM.2021.728717
Abstract: Reactive oxygen species (ROS) and dissolved oxygen play key roles across many biological processes, and fluorescent stains and dyes are the primary tools used to quantify these species in vitro. However, spatio-temporal monitoring of ROS and dissolved oxygen in biological systems are challenging due to issues including poor photostability, lack of reversibility, and rapid off-site diffusion. In particular, ROS monitoring is hindered by the short lifetime of ROS molecules and their low abundance. The combination of nanomaterials and fluorescent detection has led to new opportunities for development of imaging probes, sensors, and theranostic products, because the scaffolds lead to improved optical properties, tuneable interactions with cells and media, and ratiometric sensing robust to environmental drift. In this review, we aim to critically assess and highlight recent development in nanosensors and nanomaterials used for the detection of oxygen and ROS in biological systems, and their future potential use as diagnosis tools.
Publisher: American Chemical Society (ACS)
Date: 22-02-2022
Abstract: Cells sense and respond to a variety of physical cues from their surrounding microenvironment, and these are interpreted through mechanotransductive processes to inform their behavior. These mechanisms have particular relevance to stem cells, where control of stem cell proliferation, potency, and differentiation is key to their successful application in regenerative medicine. It is increasingly recognized that surface micro- and nanotopographies influence stem cell behavior and may represent a powerful tool with which to direct the morphology and fate of stem cells. Current progress toward this goal has been driven by combined advances in fabrication technologies and cell biology. Here, the capacity to generate precisely defined micro- and nanoscale topographies has facilitated the studies that provide knowledge of the mechanotransducive processes that govern the cellular response as well as knowledge of the specific features that can drive cells toward a defined differentiation outcome. However, the path forward is not fully defined, and the "bumpy road" that lays ahead must be crossed before the full potential of these approaches can be fully exploited. This review focuses on the challenges and opportunities in applying micro- and nanotopographies to dictate stem cell fate for regenerative medicine. Here, key techniques used to produce topographic features are reviewed, such as photolithography, block copolymer lithography, electron beam lithography, nanoimprint lithography, soft lithography, scanning probe lithography, colloidal lithography, electrospinning, and surface roughening, alongside their advantages and disadvantages. The biological impacts of surface topographies are then discussed, including the current understanding of the mechanotransductive mechanisms by which these cues are interpreted by the cells, as well as the specific effects of surface topographies on cell differentiation and fate. Finally, considerations in translating these technologies and their future prospects are evaluated.
Publisher: Frontiers Media SA
Date: 21-12-2020
Publisher: Wiley
Date: 17-04-2023
Abstract: Tissue engineering benefits from advances in 3D printing and multi‐material assembly to attain certain functional benefits over existing man‐made materials. Multilayered tissue engineering constructs might unlock a unique combination of properties, but their fabrication remains challenging. Herein, a facile process is reported to manufacture biomaterials with an engineered multilayer architecture, via a combination of co‐extrusion and 3D printing. Polymer filaments containing 5, 17, or 129 alternating layers of poly(lactic acid)/thermoplastic polyurethane (PLA/TPU) are produced, and explored for their use in fused deposition modeling (FDM) to fabricate scaffolds for cardiomyocyte culture. The co‐extruded filaments exhibit a layered architecture in their cross‐section with a continuous interface, and the integrity and alignment of the layers are preserved after 3D printing. The 17 alternating layers PLA/TPU composites exhibit excellent mechanical properties. It is envisaged that the multilayered architecture of the fabricated scaffolds can be beneficial for aligning cardiomyocytes in culture. It is found that the 17 alternating layers PLA/TPU significantly improve cardiomyocyte morphology and functionality compared to single phase materials. It is believed that this biomaterials fabrication scheme, combining a top‐down and bottom‐up approach, offers tremendous flexibility in producing a broad class of novel‐architectured materials with tunable structural design for tissue engineering applications and beyond.
Publisher: Elsevier BV
Date: 07-2010
DOI: 10.1016/J.BIOMATERIALS.2010.03.015
Abstract: Unlocking the clinical potential of stem cell based therapies requires firstly elucidation of the biological mechanisms which direct stem cell fate decisions and thereafter, technical advances which allow these processes to be driven in a fully defined culture environment. Strategies for the generation of defined surfaces for human embryonic stem cell (hESC) and mesenchymal stem cell (MSC) culture remain in their infancy. In this paper we outline a simple, effective and efficient method for presenting proteins or peptides on an otherwise non-fouling Layer-by-Layer (LbL) self-assembled surface of hyaluronic acid (HA) and chitosan (CHI). We are able to generate a surface that has both good temporal stability and the ability to direct biological outcomes based on its defined surface composition. Surface functionalization is achieved through suspending the selected extracellular matrix (ECM) protein domain or extracted full-length protein in buffer containing a cross-linking agent (N-hydroxysulfosuccinimide/N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride) over the LbL HA-CHI surface and then allowing the solvent to evaporate overnight. This simple, but important step results in remarkable protein deposition efficiencies often exceeding 50%, whereas traditional cross-linking methods result in such poor deposition of non-collagenous proteins that a.) quantification of bound amounts of protein is outside the resolution of commonly utilized protein assays, and b.) these surfaces are both unable to support cell attachment and growth. The utility of the protein-modified HA-CHI surfaces is demonstrated through the identification of specific hESC attachment efficiencies and through directing MSC osteogenic outcomes on these fully defined surfaces. This simple and scalable method is shown to enable the development of defined stem cell culture conditions, as well as the elucidation of the fundamental biological processes necessary for the realization of stem cell based therapies.
Location: United Kingdom of Great Britain and Northern Ireland
Start Date: 2019
End Date: 2021
Funder: Australian Research Council
View Funded ActivityStart Date: 2013
End Date: 11-2017
Amount: $375,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 2021
End Date: 06-2024
Amount: $413,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 09-2023
End Date: 08-2026
Amount: $477,230.00
Funder: Australian Research Council
View Funded ActivityStart Date: 01-2021
End Date: 11-2027
Amount: $4,969,663.00
Funder: Australian Research Council
View Funded ActivityStart Date: 06-2019
End Date: 12-2022
Amount: $440,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 2014
End Date: 12-2016
Amount: $365,000.00
Funder: Australian Research Council
View Funded Activity