ORCID Profile
0000-0003-2037-853X
Current Organisation
ANSTO - Australian Synchrotron
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
In Research Link Australia (RLA), "Research Topics" refer to ANZSRC FOR and SEO codes. These topics are either sourced from ANZSRC FOR and SEO codes listed in researchers' related grants or generated by a large language model (LLM) based on their publications.
Colloid and Surface Chemistry | Physical Chemistry (Incl. Structural) | Pharmaceutical Sciences
Nutraceuticals and Functional foods | Butter and Milk-Derived Fats and Oils (excl. Cream) | Expanding Knowledge in the Chemical Sciences |
Publisher: American Chemical Society (ACS)
Date: 28-11-2017
Abstract: Nanoparticle dispersions open up an ecofriendly route toward printable organic solar cells. They can be formed from a variety of organic semiconductors by using miniemulsions that employ surfactants to stabilize the nanoparticles in dispersion and to prevent aggregation. However, whenever surfactant-based nanoparticle dispersions have been used to fabricate solar cells, the reported performances remain moderate. In contrast, solar cells from nanoparticle dispersions formed by precipitation (without surfactants) can exhibit power conversion efficiencies close to those of state-of-the-art solar cells processed from blend solutions using chlorinated solvents. In this work, we use small-angle neutron scattering measurements and transient absorption spectroscopy to investigate why surfactant-free nanoparticles give rise to efficient organic solar cells. We show that surfactant-free nanoparticles comprise a uniform distribution of small semiconductor domains, similar to that of bulk-heterojunction films formed using traditional solvent processing. This observation differs from surfactant-based miniemulsion nanoparticles that typically exhibit core-shell structures. Hence, the surfactant-free nanoparticles already possess the optimum morphology for efficient energy conversion before they are assembled into the photoactive layer of a solar cell. This structural property underpins the superior performance of the solar cells containing surfactant-free nanoparticles and is an important design criterion for future nanoparticle inks.
Publisher: American Chemical Society (ACS)
Date: 04-05-2020
Publisher: Elsevier BV
Date: 05-2022
Publisher: American Chemical Society (ACS)
Date: 23-06-2020
Publisher: Royal Society of Chemistry (RSC)
Date: 2012
DOI: 10.1039/C2JM32072J
Publisher: Elsevier BV
Date: 11-2019
DOI: 10.1016/J.JCIS.2019.07.081
Abstract: Drug nanocrystals precipitated inside liposomes are of increasing interest in liposomal drug delivery. For liposomal nanocrystal formulations, the size and shape of the drug nanocrystals can influence the apparent drug release properties, providing opportunities for developing tailored liposomal drug release systems. Small angle X-ray scattering (SAXS) and quantitative transmission electron microscopy (TEM) can be used to analyse the size distributions of the nanoparticles. In this study, by changing the fluidity of the membrane through the use of different membrane phospholipids with varying cholesterol content, the impact of lipid phase, fluidity and permeability on the size distribution of ciprofloxacin nanocrystals were investigated using standard TEM and SAXS as orthogonal techniques. The results show that the phospholipid phase behaviour has a direct effect on the nanocrystal size distribution, where shorter and thinner nanocrystals were formed in liposomes made from hydrogenated soy phosphatidylcholine (HSPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) phospholipids with higher phase transition temperatures than 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) with lower transition temperatures. This is mainly due to the phase behaviour of the liposome during nanocrystal formation. The addition of cholesterol that reduces fluidity and permeability of the DOPC liposomes was also shown to restrict the growth of the ciprofloxacin nanocrystals. Moreover, increasing the drug loading of the liposomes made from HSPC and DPPC produced longer and wider nanocrystals. The findings open new opportunities to tailor nanocrystal size distributions, as well as the aspect ratio of the enclosing liposomes with potential to alter drug release and in vivo behaviour.
Publisher: Springer Science and Business Media LLC
Date: 15-09-2020
DOI: 10.1007/S13346-020-00851-Z
Abstract: Delamanid is a poorly water-soluble drug currently being used for the treatment of tuberculosis. The high frequency of dosing leads to poor adherence for patients who live in lower economic and nomadic populations. Non-digestible self-assembling lipids as a formulation approach for poorly water-soluble drugs have previously been shown to extend the window of absorption through gastric retention. We hypothesise that this approach could lead to the reduction of dosing frequency for delamanid and thereby has potential to improve adherence. Formulations of delamanid were prepared in selachyl alcohol and phytantriol as non-digestible self-assembling lipid vehicles, and their behaviour was compared with reconstituted milk powder, as a digestible lipid-based formulation, and an aqueous suspension. The self-assembly of selachyl alcohol and phytantriol in aqueous media in the presence of delamanid was studied using small angle X-ray scattering and produced the inverse hexagonal (H 2 ) and inverse bicontinuous cubic (V 2 ) liquid crystal structures, respectively. The times at which maximum delamanid levels in plasma were observed (T max ) after oral administration of the phytantriol, selachyl alcohol and reconstituted milk powder formulations of delamanid to rats were 27 ± 3, 20 ± 4 and 6.5 ± 1.0 h, respectively, compared with the aqueous suspension formulation with a T max of 3.4 ± 1 h, which confirms the hypothesis of an extended duration of absorption after administration in non-digestible self-assembling lipids. The digestion products of the triglycerides in the milk formulation increased the solubilisation of delamanid in the gastrointestinal tract, leading to an increase in exposure compared with the aqueous suspension formulation but did not significantly extend T max . Overall, the non-digestible nanostructured lipid formulations extended the duration of absorption of delamanid well beyond that from milk or suspension formulations.
Publisher: American Chemical Society (ACS)
Date: 15-03-2023
Publisher: American Chemical Society (ACS)
Date: 25-06-2021
Publisher: MDPI AG
Date: 16-10-2022
Abstract: The crystallinity of polymers strongly affects their properties. For block copolymers, whereby two crystallisable blocks are covalently tethered to one another, the molecular weight of the in idual blocks and their relative weight fraction are important structural parameters that control their crystallisation. In the case of block copolymer micelles, these parameters can influence the crystallinity of the core, which has implications for drug encapsulation and release. Therefore, in this study, we aimed to determine how the microstructure of poly(ethylene glycol-b-caprolactone) (PEG-b-PCL) copolymers contributes to the crystallinity of their hydrophobic PCL micelle cores. Using a library of PEG-b-PCL copolymers with PEG number-average molecular weight (Mn) values of 2, 5, and 10 kDa and weight fractions of PCL (fPCL) ranging from 0.11 to 0.67, the thermal behaviour and morphology were studied in blends, bulk, and micelles using differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WXRD), and Synchrotron wide-angle X-ray scattering (WAXS). Compared to PEG and PCL homopolymers, the block copolymers displayed reduced crystallinity in the bulk phase and the in idual blocks had a large influence on the crystallisation of one another. The fPCL was determined to be the dominant contributor to the extent and order of crystallisation of the two blocks. When fPCL 0.35, the initial crystallisation of PEG led to an amorphous PCL phase. At fPCL values between 0.35 and 0.65, PEG crystallisation was followed by PCL crystallisation, whereas this behaviour was reversed when fPCL 0.65. For lyophilised PEG-b-PCL micelles, the crystallinity of the core increased with increasing fPCL, although the core was predominately amorphous for micelles with fPCL 0.35. These findings contribute to understanding the relationships between copolymer microstructure and micelle core crystallinity that are important for the design and performance of micellar drug delivery systems, and the broader application of polymer micelles.
Publisher: American Chemical Society (ACS)
Date: 12-11-2015
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C6SM02420C
Abstract: The melanins are a class of pigmentary bio-macromolecules ubiquitous in the biosphere. They possess an intriguing set of physico-chemical properties and have been shown to exhibit hybrid protonic-electronic electrical conductivity, a feature derived from a process termed chemical self-doping driven by the sorption of water. Although the mechanism underlying the electrical conduction has been established, how the sorbed water interacts with the melanin structure at the physical level has not. Herein we use neutron reflectometry to study changes in the structure of synthetic melanin thin films as a function of H
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7TC00893G
Abstract: An optical-frequency dielectric constant of 4.6 leads to improved charge generation efficiency in an organic semiconductor homojunction photovoltaic device.
Publisher: Elsevier BV
Date: 04-2021
Publisher: Elsevier BV
Date: 2019
Publisher: American Chemical Society (ACS)
Date: 03-03-2021
Publisher: American Chemical Society (ACS)
Date: 27-01-2014
DOI: 10.1021/LA403951J
Abstract: Fullerene derivatives are commonly used as electron acceptors in combination with (macro)molecular electron donors in bulk heterojunction (BHJ) organic photovoltaic (OPV) devices. Understanding the BHJ structure at different electron donor/acceptor ratios is critical to the continued improvement and development of OPVs. The high neutron scattering length densities (SLDs) of the fullerenes provide effective contrast for probing the distribution of the fullerene within the blend in a nondestructive way. However, recent neutron scattering studies on BHJ films have reported a wide range of SLDs ((3.6-4.4) × 10(-6) Å(-2)) for the fullerenes 60-PCBM and 70-PCBM, leading to differing interpretations of their distribution in thin films. In this article, we describe an approach for determining more precisely the scattering length densities of the fullerenes within a polymer matrix in order to accurately quantify their distribution within the active layers of OPV devices by neutron scattering techniques.
Publisher: Elsevier BV
Date: 11-2014
Publisher: American Chemical Society (ACS)
Date: 15-09-2014
DOI: 10.1021/LA5020779
Abstract: We have used steady-state and time-resolved neutron reflectometry to study the diffusion of fullerene derivatives into the narrow optical gap polymer poly[N-9″-hepta-decanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) to explore the sequential processing of the donor and acceptor for the preparation of efficient organic solar cells. It was found that when [6,6]-phenyl-C61-butyric-acid-methyl-ester (60-PCBM) was deposited onto a thin film of PCDTBT from dichloromethane (DCM), a three-layer structure was formed that was stable below the glass-transition temperature of the polymer. When good solvents for the polymer were used in conjunction with DCM, both 60-PCBM and [6,6]-phenyl-C71-butyric-acid-methyl-ester (70-PCBM) were seen to form films that had a thick fullerene layer containing little polymer and a PCDTBT-rich layer near the interface with the substrate. Devices composed of films prepared by sequential deposition of the polymer and fullerene had efficiencies of up to 5.3%, with those based on 60-PCBM close to optimized bulk heterojunction (BHJ) cells processed in the conventional manner. Sequential deposition of pure components to form the active layer is attractive for large-area device fabrication, and the results demonstrate that this processing method can give efficient solar cells.
Publisher: American Chemical Society (ACS)
Date: 06-06-2016
Publisher: Royal Society of Chemistry (RSC)
Date: 2021
DOI: 10.1039/D1PY00995H
Abstract: Ring-Opening Polymerization-Induced Self-Assembly (ROPISA) of N -carboxyanhydride is an efficient one-step process to obtain nanomaterials made of polypeptides.
Publisher: American Chemical Society (ACS)
Date: 22-03-2017
Publisher: MDPI AG
Date: 19-10-2022
DOI: 10.3390/PHARMACEUTICS14102228
Abstract: Praziquantel is a poorly water-soluble drug used to treat parasitic infections. Previous studies have suggested that its rate and extent of dissolution in milk and biorelevant media are slow and limited compared to dissolution in the pharmacopoeial-recommended medium, despite being reported as displaying a positive food effect upon administration. This study aimed to revisit the dissolution of praziquantel in biorelevant media and milk to better understand this apparent dichotomy. The context of digestion was introduced to better understand drug solubilisation under more relevant gastrointestinal conditions. The amount of praziquantel solubilised in the various media during digestion was quantified using high performance liquid chromatography (HPLC) and the kinetics of dissolution were confirmed by tracking the disappearance of solid crystalline drug using in situ small angle X-ray scattering (SAXS). For the dissolution media, where sodium lauryl sulfate (SLS) is typically included as a wetting agent, a prominent effect of SLS on drug dissolution was also apparent where .5 fold more drug was solubilised in SLS-containing dissolution medium compared to that without (0.1 M HCl only). In milk, significant dissolution of praziquantel was observed only during digestion and not during dispersion, hence suggesting that (1) milk can be potentially administered with praziquantel to improve oral bioavailability and (2) incorporating a digestion step into existing in vitro dissolution testing can better reflect the potential for a positive food effect when lipids are present.
Publisher: Elsevier BV
Date: 05-2021
Publisher: American Chemical Society (ACS)
Date: 20-03-2018
Publisher: MDPI AG
Date: 28-08-2023
Abstract: Interfacial compositions of fat globules modulate the digestion behaviour of milk triglycerides in the gastrointestinal tract, thereby affecting lipid metabolism and delivery of nutrients. In this study, we aim to understand the impact of emulsifiers on lipid digestibility and the self-assembled liquid crystal structures formed by anhydrous milk fat (AMF) during digestion. AMF was emulsified with casein and milk phospholipids, and digestion was performed in both gastric and small intestinal conditions to account for changes at the oil/water interface following enzymatic digestion in the gastric phase. Small angle X-ray scattering was used to characterise the self-assembled structures of the digestion products, while coherent anti-Stokes Raman scattering microscopy was utilised to probe changes in lipid distribution at the single droplet level during digestion. Our findings confirmed that emulsifiers play a key role in the digestion of AMF. Milk phospholipids exhibited a protective effect on milk triglycerides against pancreatic lipase digestion by slowing digestion, but this effect was slightly negated in emulsions pre-digested under gastric conditions. The overall types of liquid crystal structures formed after digestion of casein- and milk phospholipids-emulsified AMF were comparable to commercial bovine milk irrespective of gastric pre-treatment. However, emulsification of AMF with milk phospholipids resulted in changes in the microstructures of the liquid crystal phases, suggesting potential interactions between the digested products of the fat globules and milk phospholipids. This study highlights the importance of emulsifiers in regulating lipid digestion behaviour and lipid self-assembly during digestion.
Publisher: American Chemical Society (ACS)
Date: 04-03-2019
Publisher: American Chemical Society (ACS)
Date: 30-04-2019
Publisher: Wiley
Date: 22-06-2016
Publisher: Elsevier BV
Date: 03-2020
DOI: 10.1016/J.JCONREL.2019.12.037
Abstract: In the advent of the post-antibiotic era, new strategies are urgently required to improve the efficacy of antimicrobials and outsmart multi-drug resistant bacteria. Exploiting a basic survival mechanism of bacteria, lipase production, monoolein liquid crystal nanoparticles (MO-LCNPs) were investigated as a bacterial-triggered drug delivery system for three different antimicrobial compounds and compared with model sn-1/3 regiospecific and non-regiospecific lipases via pH-stat titration, proton nuclear magnetic resonance and in situ synchrotron small-angle X-ray scattering. The release of model hydrophobic (rif icin) and macromolecular (alginate lyase) antimicrobials were triggered from MO-LCNPs at 82-fold and 7-fold higher rates (respectively) due to bacterial lipase digestion of MO-LCNPs, which could not be stimulated with a small hydrophilic antibiotic (ciprofloxacin HCl) or non-digestible, phytantriol-LCNPs. While sn-1/3 regiospecific lipase rapidly digested MO-LCNPs in a two-phase process, the single-phase digestion kinetics of the non-regiospecific lipase steadily digested the cubic Im3m structure and gave rise to lamellar structures that ultimately stimulated the triggered antibiotic release. Accordingly, MO-LCNPs have an application for localised Pseudomonas aeruginosa and Staphylococcus aureus infections that produce non-regiospecific lipases and for concentration-dependent antibiotics that have macromolecular (MW ~ 30 kDa) or hydrophobic (logP ~ 4) chemistries, as a triggered bolus release would be clinically efficacious for improved bacterial eradication.
Publisher: Wiley
Date: 25-10-2018
Publisher: American Chemical Society (ACS)
Date: 23-04-2019
Publisher: American Chemical Society (ACS)
Date: 11-2017
Publisher: Elsevier BV
Date: 12-2018
Publisher: Elsevier BV
Date: 2019
DOI: 10.1016/J.JCIS.2018.09.022
Abstract: Phytantriol is an interfacially-active lipid that is chemically robust, non-digestible and forms particles with internal bicontinuous cubic phase structures (cubosomes) when dispersed with non-ionic surfactants at ambient and physiological temperatures. The liquid crystalline internal structure of phytantriol-based cubosomes can be changed to alter the interfacial contact area/topology with the aqueous dispersant to trigger bioactive payload release or to alter the local membrane curvature around bound or embedded proteins. To enable the study of payload distribution, structure and transformation kinetics within phytantriol particles by neutron scattering techniques it is desirable to have access to a deuterated version of this molecule but to date a synthetic route has not been available. The first successful synthesis of phytantriol-d
Publisher: Elsevier BV
Date: 04-2018
Publisher: Wiley
Date: 24-03-2018
Publisher: Elsevier BV
Date: 03-2018
DOI: 10.1016/J.CHEMPHYSLIP.2017.10.009
Abstract: Milk has recently been reported to form complex self-assembled liquid crystalline structures during digestion by lipolytic enzymes. The formation of cubic phases at the endpoint of digestion was of particular interest as this requires a fine balance in self-assembly. This manuscript probes the robustness of the kinetic structural behaviour when milk is subjected to a range of processes that are encountered by milk and/or are relevant to the use of milk in pharmaceutical applications (homogenisation, lyophilisation, freeze-thawing and freeze-drying) using time-resolved small angle X-ray scattering (TR-SAXS). The nature of the persistent lamellar phase that occurs during digestion is elucidated using SAXS and X-ray photoelectron spectroscopy, and the interplay between the formation of structured mesophases and the evolution of particle size during digestion is determined using laser light scattering studies. This closer look at milk lipids during digestion establishes the dependence of the structural behaviour of milk on lipid composition and not processing, and clarifies the phase behaviour and kinetic effects on particle size distribution under lipolytic conditions.
Publisher: American Chemical Society (ACS)
Date: 22-01-2018
Abstract: Organic light-emitting devices containing solution-processed emissive dendrimers can be highly efficient. The most efficient devices contain a blend of the light-emitting dendrimer in a host and one or more charge-transporting layers. Using neutron reflectometry measurements with in situ photoluminescence, we have investigated the structure of the as-formed film as well as the changes in film structure and dendrimer emission under thermal stress. It was found that the as-formed film stacks comprising poly(3,4-ethylenedioxythiophene):polystyrene sulfonate/host:dendrimer/1,3,5-tris(N-phenylbenzimidazol-2-yl)benzene (where the host was deuterated 4,4'-N,N'-di(carbazolyl)biphenyl or tris(4-carbazol-9-ylphenyl)amine, the host:dendrimer layer was solution-processed, and the 1,3,5-tris(N-phenylbenzimidazol-2-yl)benzene evaporated) had well-defined interfaces, indicating good wetting of each of the layers by the subsequently deposited layer. Upon thermal annealing, there was no change in the poly(3,4-ethylenedioxythiophene):polystyrene sulfonate/host:dendrimer interface, but once the temperature reached above the T
Publisher: Elsevier BV
Date: 10-2020
Publisher: MDPI AG
Date: 21-04-2023
Abstract: Polymeric micelles are promising carriers for the delivery of poorly water-soluble drugs, providing enhanced drug solubility, blood circulation times, and bioavailability. Nevertheless, the storage and long-term stability of micelles in solution present challenges requiring the lyophilization and storage of formulations in the solid state, with reconstitution immediately prior to application. Therefore, it is important to understand the effects of lyophilization/reconstitution on micelles, particularly their drug-loaded counterparts. Herein, we investigated the use of β-cyclodextrin (β-CD) as a cryoprotectant for the lyophilization/reconstitution of a library of poly(ethylene glycol-b-ε-caprolactone) (PEG-b-PCL) copolymer micelles and their drug-loaded counterparts, as well as the effect of the physiochemical properties of different drugs (phloretin and gossypol). The critical aggregation concentration (CAC) of the copolymers decreased with increasing weight fraction of the PCL block (fPCL), plateauing at ~1 mg/L when the fPCL was .45. The blank (empty) and drug-loaded micelles were lyophilized/reconstituted in the absence and presence of β-CD (9% w/w) and analyzed via dynamic light scattering (DLS) and synchrotron small-angle X-ray scattering (SAXS) to assess for changes in aggregate size (hydrodynamic diameter, Dh) and morphology, respectively. Regardless of the PEG-b-PCL copolymer or the use of β-CD, the blank micelles displayed poor redispersibility ( % relative to the initial concentration), while the fraction that redispersed displayed similar Dh to the as-prepared micelles, increasing in Dh as the fPCL of the PEG-b-PCL copolymer increased. While most blank micelles displayed discrete morphologies, the addition of β-CD or lyophilization/reconstitution generally resulted in the formation of poorly defined aggregates. Similar results were also obtained for drug-loaded micelles, with the exception of several that retained their primary morphology following lyophilization/reconstitution, although no obvious trends were noted between the microstructure of the copolymers or the physicochemical properties of the drugs and their successful redispersion.
Publisher: Elsevier BV
Date: 2019
DOI: 10.1016/J.XPHS.2018.11.028
Abstract: Polyethoxylated, nonionic surfactants are important constituents of many drug formulations, including lipid-based formulations. In an effort to better understand the behavior of formulation excipients at the molecular level, we have developed molecular dynamics (MD) models for the widely used surfactant Kolliphor EL (KOL), a triricinoleate ester of ethoxylated glycerol. In this work, we have developed models based on a single, representative molecular component modeled with 2 force field variations based on the GROMOS 53A6
Publisher: American Chemical Society (ACS)
Date: 29-06-2020
Publisher: Elsevier BV
Date: 04-2022
DOI: 10.1016/J.EJPB.2022.02.001
Abstract: Mesoporous silica particles (MSPs) are emerging as an interesting option to reduce calorific uptake as a treatment for obesity and other metabolic conditions. However, their further development under the pharmaceutical regulatory framework is hindered by poor understanding of the mechanisms by which they exert their effects. In the current study the interaction of MSPs with the lipid digestion process is investigated, specifically interactions with lipase enzymes and lipid digestion products as a key contributing factor to lipid absorption and calorific intake. The impact of exposing lipase to MSPs on the enzyme activity was assessed directly using the tributyrin digestion test. The extent of interaction of digestion products with MSPs was studied using selectively radiolabeled bile components and lipids, while the impact on in vivo absorption of lipids was studied by incorporation of radiolabelled lipid (triolein) into milk and administration with and without particles. The studies showed that particles that inhibited lipase activity also tended to interact more extensively with lipid digestion products. In vitro X-ray scattering studies revealed the interaction of some MSPs with lipid digestion products through changes in lipid self-assembly during digestion. The MSPs led to reduced lipid absorption in vivo compared to the control particles and MSP-free milk. While the specific properties of the MSPs that drive the differences between the behavior of MSPs during lipid digestion remain elusive, the studies highlight that interactions with the lipid digestion and absorption pathways are a likely mechanism for reducing calorific uptake.
Publisher: American Chemical Society (ACS)
Date: 13-04-2017
Abstract: Organic light-emitting diodes (OLEDs) are subject to thermal stress from Joule heating and the external environment. In this work, neutron reflectometry (NR) was used to probe the effect of heat on the morphology of thin three-layer organic films comprising materials typically found in OLEDs. It was found that layers within the films began to mix when heated to approximately 20 °C above the glass-transition temperature (T
Publisher: AIP Publishing
Date: 05-09-2016
DOI: 10.1063/1.4961935
Abstract: Low donor content solar cells containing polymeric and non-polymeric donors blended with fullerenes have been reported to give rise to efficient devices. In this letter, we report that a dendrimeric donor can also be used in solution-processed low donor content devices when blended with a fullerene. A third generation dendrimer containing 42 thiophene units (42T) was found to give power conversion efficiencies of up to 3.5% when blended with PC70BM in optimized devices. The best efficiency was measured with 10 mole percent (mol. %) of 42T in PC70BM and X-ray reflectometry showed that the blends were uniform. Importantly, while 42T comprised 10 mol. % of the film, it made up 31% of the film by volume. Finally, it was found that solvent annealing was required to achieve the largest open circuit voltage and highest device efficiencies.
Publisher: Elsevier BV
Date: 11-2020
Publisher: American Chemical Society (ACS)
Date: 22-07-2023
Publisher: Elsevier BV
Date: 2021
DOI: 10.1016/J.JCIS.2020.08.045
Abstract: Hydrophobic ion pairing (HIP), a solubility engineering technique in which ionic hydrophilic molecules are paired with a hydrophobic counterion, is an attractive strategy for encapsulating ionic water-soluble species into nanocarriers (NCs). Drug release from NCs containing HIP complexes is sensitive to ionic strength, pH, and drug:counterion charge ratio, but the exact mechanism for this was unknown, as was the underlying microstructure inside the NCs. We hypothesize that HIP complexes arrange into liquid crystalline structures in NC cores and that these structures are responsible for salt- and pH-dependent release. A model hydrophobic ion pair from the cationic antimicrobial peptide polymyxin B sulfate and the anionic counterion sodium oleate is encapsulated into ~100 nm NCs formed using Flash NanoPrecipitation (FNP) and stabilized with an hiphilic diblock copolymer, poly(caprolactone)-b-poly(ethylene glycol). Internal structures are observed using synchrotron small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) following NC formulation and are found to vary with polymyxin:oleate charge ratio. In vitro drug release is also measured with changes in pH and two charge ratio. For a formulation containing a four-fold charge excess of oleate relative to polymyxin, internal structures rearranged from a lamellar phase into an inverse hexagonal phase. The hexagonal phase formation corresponds to a greatly reduced rate of polymyxin release, suggesting that the polymyxin was incorporated into the center of hexagonally-packed rods. When release tests were repeated using phosphate-buffered saline (PBS) at pH 2.0 to ensure protonation of the oleic acid, all internal structures were eliminated and release occurs much faster than at neutral pH, regardless of charge ratio. These findings shed light on the mechanism behind stimulus-responsive drug release from systems containing hydrophobic ion pairs and enable the rational design of controlled-release formulations by manipulating the formation and dynamics of liquid crystalline phases inside NCs.
Publisher: Elsevier BV
Date: 11-2019
DOI: 10.1016/J.JCIS.2019.08.007
Abstract: The distribution of three cell-penetrating peptides (CPPs) with different architectures (short, long linear and branched) on poly(lactic-co-glycolic) acid (PLGA) nanoparticles depends on the conjugation approach. Here, we explore the utilization of a zero-length crosslinking reaction for the covalent attachment of CPPs to PLGA nanoparticles and the translation of the reaction into a microfluidic platform. A microfluidic device with a staggered herringbone mixer was used for the formulation of CPP-tagged PLGA nanoparticles. CPP-tagged PLGA nanoparticles were labeled with gold nanoparticles (AuNPs) and transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS) were used to elucidate the distribution of CPPs. The SAXS scattering profiles for the CPP-tagged PLGA nanoparticles prepared with the in situ microfluidics conjugation approach indicated a distribution of the Au-labeled CPPs throughout the PLGA nanoparticles. For the post-microfluidics conjugation approach, the SAXS scattering profiles did not show the feature of the Au-labeled CPPs distributed throughout the PLGA nanoparticles and an arrangement of the Au-labeled CPP on the surface was support by TEM micrographs. The distribution of the CPPs was highly dependent on the conjugation approach and was not influenced by the architecture of the CPPs. The results provided insight for the rational design of CPP-tagged PLGA nanoparticles using microfluidics.
Publisher: American Chemical Society (ACS)
Date: 03-02-2020
Publisher: Springer Science and Business Media LLC
Date: 15-09-2015
DOI: 10.1038/NCOMMS9240
Abstract: Unambiguous and selective standoff (non-contact) infield detection of nitro-containing explosives and taggants is an important goal but difficult to achieve with standard analytical techniques. Oxidative fluorescence quenching is emerging as a high sensitivity method for detecting such materials but is prone to false positives—everyday items such as perfumes elicit similar responses. Here we report thin films of light-emitting dendrimers that detect vapours of explosives and taggants selectively—fluorescence quenching is not observed for a range of common interferents. Using a combination of neutron reflectometry, quartz crystal microbalance and photophysical measurements we show that the origin of the selectivity is primarily electronic and not the diffusion kinetics of the analyte or its distribution in the film. The results are a major advance in the development of sensing materials for the standoff detection of nitro-based explosive vapours, and deliver significant insights into the physical processes that govern the sensing efficacy.
Publisher: American Chemical Society (ACS)
Date: 22-06-2018
DOI: 10.1021/ACS.MOLPHARMACEUT.8B00541
Abstract: Milk has been used as a vehicle for the delivery of antimalarial drugs during clinical trials to test for a food effect and artefenomel (OZ439) showed enhanced oral bioavailability with milk. However, the nature of the interaction between milk and OZ439 in the gastrointestinal tract remains poorly understood. To understand the role of milk digestion on the solubilization of OZ439 and polymorphism, we conducted real-time monitoring of crystalline drug in suspension during in vitro intestinal lipolysis of milk containing OZ439 using synchrotron X-ray scattering. OZ439 formed an unstable solid-state intermediate free base form (OZ439-FB form 1) at intestinal pH and was partially solubilized by milk fat globules prior to lipolysis. Dissolution of the free base form 1 and recrystallization of OZ439 in a more stable polymorphic form (OZ439-FB form 2) occurred during in vitro lipolysis in milk. Simply stirring the milk/drug suspension in the absence of lipase or addition of lipase to OZ439 in a lipid-free buffer did not induce this polymorphic transformation. The formation of OZ439-FB form 2 was therefore accelerated by the solubilization of OZ439-FB form 1 during the digestion of milk. Our findings confirmed that although crystalline precipitates of OZ439-FB form 2 could still be detected after in vitro digestion, milk-based lipid formulations provided a significant reduction in crystalline OZ439 compared to lipid-free formulations, which we attribute to the formation of colloidal structures by the digested milk lipids. Milk may therefore be particularly suited as a form of lipid-based formulation (LBF) for coadministration with OZ439, from which both an enhancement in OZ439 oral bioavailability and the delivery of essential nutrients should result.
Publisher: CSIRO Publishing
Date: 06-09-2023
DOI: 10.1071/CH23131
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C5TC01967B
Abstract: A method of introducing pulses of analyte vapours has been developed to study the interactions of nitro-containing analytes with fluorescent sensing films.
Publisher: Wiley
Date: 07-02-2017
Abstract: The effect of varying the emitter concentration on the structural properties of an archetypal phosphorescent blend consisting of 4,4'-bis(N-carbazolyl)biphenyl and tris(2-phenylpyridyl)iridium(III) has been investigated using non-equilibrium molecular dynamics (MD) simulations that mimic the process of vacuum deposition. By comparison with reflectometry measurements, we show that the simulations provide an accurate model of the average density of such films. The emitter molecules were found not to be evenly distributed throughout film, but rather they can form networks that provide charge and/or energy migration pathways, even at emitter concentrations as low as ≈5 weight percent. At slightly higher concentrations, percolated networks form that span the entire system. While such networks would give improved charge transport, they could also lead to more non-radiative pathways for the emissive state and a resultant loss of efficiency.
Publisher: Elsevier BV
Date: 2021
Publisher: International Union of Crystallography (IUCr)
Date: 31-10-2023
Publisher: Elsevier BV
Date: 10-2019
DOI: 10.1016/J.COLSURFB.2019.110362
Abstract: Liposomal formulations have important therapeutic applications in anti-cancer treatments but current formulations suffer from serious side effects, high dosage requirements and prolonged treatment. In this study, PEGylated azide-functionalized liposomes containing drug nanocrystals were investigated with the aim of increasing the drug payload and achieving functionalization for targeted delivery. Liposomes were characterized using cryogenic transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS), small and ultra-small angle neutron scattering (SANS/USANS) and small and wide angle X-ray scattering (SAXS/WAXS). Cryo-TEM experiments revealed the dimensions of the nanocrystal-loaded liposomes and the change of shape from spherical to elongated after the formation of nanocrystals. Results from SANS/USANS experiments confirmed the asymmetric particle shape. SAXS/WAXS experiments confirmed that the crystalline drug only occurred in freeze-thawed s les and correlated with a new unidentified polymorphic form of ciprofloxacin. Using a small molecule dye, dibenzocyclooctyne (DBCO)-cy5, specific conjugation between DBCO groups and surface azide groups on the liposomes was confirmed this indicates the promise of this system for tumour-targeted delivery.
Start Date: 03-2019
End Date: 05-2021
Amount: $385,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 02-2020
End Date: 12-2023
Amount: $477,183.00
Funder: Australian Research Council
View Funded Activity