ORCID Profile
0000-0002-7633-0562
Current Organisation
University of South Australia
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Elsevier BV
Date: 03-2008
Publisher: American Chemical Society (ACS)
Date: 03-03-2022
DOI: 10.1021/ACS.MOLPHARMACEUT.1C00781
Abstract: SBA-15 mesoporous silica (MPS) has been widely used in oral drug delivery however, it has not been utilized for solidifying lipid-based formulations, and the impact of their characteristic intrawall microporosity remains largely unexplored. Here, we derive the impact of the MPS microporosity on the
Publisher: Springer Science and Business Media LLC
Date: 22-03-2022
DOI: 10.1007/S11095-022-03229-7
Abstract: Cationic polymers have many advantages as vectors for mediated cellular entry and delivery of siRNA. However, toxicity related to their cationic charge has compromised clinical use. It is hypothesized that the siRNA-vector complex composition and properties can be controlled to optimize therapeutic performance. Here we investigate siRNA complexes with branched polyethylenimine (bPEI) versus generation 4 polyamidoamine dendrimers (PAMAM) on interactions with immobilized lipid membranes, and cellular uptake and toxicity. A model siRNA was complexed with either PAMAM or bPEI, and their size and zeta-potential characterized. Interaction of the complexes and parent polymers with lipid bilayers was investigated using atomic force microscopy and correlated with the uptake and toxicity in HeLa cells. PAMAM and its siRNA complexes formed circular shaped micron-sized holes in lipid bilayers, while bPEI formed nanoscale holes. Flow cytometry and fluorescence microscopy demonstrated PAMAM-siRNA complexes to have a higher cellular uptake than bPEI-siRNA complexes. bPEI-siRNA complexes did not impact on viability, however PAMAM-siRNA complexes demonstrated increasing cell toxicity as N/P ratio increased. PAMAM-siRNA complexes accumulated around the cell nucleus, while PEI-siRNA complexes were located closer to the cell wall. Complexation of PAMAM dendrimer or bPEI with siRNA modified physicochemical properties of the parent polymer, however it did not impact on the mechanism of interaction with model lipid bilayers or how the polymer/siRNA complex interacted and was internalized by HeLa cells. Interaction of siRNA polymer complexes with cells is related to the action of the parent polymer.
Publisher: Wiley
Date: 09-12-2010
Abstract: Surfaces with micro‐ and nanometer‐scale patterns have many potential applications, particularly in lifescience. This article reports on a versatile, straightforward, and inexpensive approach for the creation of chemical patterns using fabricated binary colloid crystals, consisting of small and large particles, as masks for the deposition of an amino‐functionalised ultrathin film by plasma polymerization. After removal of the binary colloidal mask, the characterization techniques [scanning electron microscopy (SEM) and atomic force microscopy (AFM)] reveal a surface contrast that depicts an ability of the small particles to allow diffusion of the plasma to the substrate. A plasma‐polymer film is created under the small particles and the region of substrate in direct contact with the large particle remains uncoated. Numerous types of patterns and feature heights can be produced with good fidelity over areas of several cm 2 by appropriate tuning of the binary colloid crystal mask morphology and the plasma‐polymer deposition time. Finally, the amine groups of the patterned surface are used for covalent grafting poly(ethylene glycol) propionaldehyde (PEG‐PALD) by reductive amination under conditions of reduced solubility to produce a patterned surface for directed adsorption of protein. AFM investigations show that the proteins are preferentially attached to the nanometer‐scale regions of the pattern without PEG‐PALD.
Publisher: Springer Science and Business Media LLC
Date: 21-10-2020
DOI: 10.1007/S00394-019-02118-X
Abstract: Application of intelligent formulation design has the ability to address the poor bioavailability and improve the fasted state bioavailability of fish oils. In this study we assessed the ability of a self-emulsifying drug delivery system (SEDDS), AquaCelle Eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) EE were formulated with AquaCelle The AquaCelle Formulating Omega-3 EE with a SEDSS concentrate (AquaCelle
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C4SM02669A
Abstract: A colloid-probe AFM based approach investigates the interaction between protein coatings on colloid probes and surfaces decorated with close-packed colloidal crystal layers.
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C6RA28491D
Abstract: We demonstrate the applicability of colloid-probe AFM to detect different surface chemistries on binary colloidal crystal layers of different chemical and protein patterns.
Publisher: Elsevier BV
Date: 10-2004
Publisher: American Chemical Society (ACS)
Date: 09-02-2002
DOI: 10.1021/MA010051W
Publisher: Elsevier BV
Date: 06-2013
DOI: 10.1016/J.COLSURFB.2013.01.052
Abstract: Addition of ionized terminal groups to PEG graft layers may cause additional interfacial forces to modulate the net interfacial interactions between PEG graft layers and proteins. In this study we investigated the effect of terminal sulfonate groups, characterizing PEG-aldehyde (PEG-CHO) and sulfonated PEG (PEG-SO3) graft layers by XPS and colloid probe AFM interaction force measurements as a function of ionic strength, in order to determine surface forces relevant to protein resistance and models of bio-interfacial interaction of such graft coatings. On the PEG-CHO surface the measured interaction force does not alter with ionic strength, typical of a repulsive steric barrier coating. An analogous repulsive interaction force of steric origin was also observed on the PEG-SO3 graft coating however, the net interaction force changed with ionic strength. Interaction forces were modelled by steric and electrical double layer interaction theories, with fitting to a scaling theory model enabling determination of the spacing and stretching of the grafted chains. Albumin, fibrinogen, and lysozyme did not adsorb on the PEG-CHO coating, whereas the PEG graft with terminal sulfonate groups showed substantial adsorption of albumin but not fibrinogen or lysozyme from 0.15 M salt solutions. Under lower ionic strength conditions albumin adsorption was again minimized as a result of the increased electrical double-layer interaction observed with the PEG-SO3 modified surface. This unique and unexpected adsorption behaviour of albumin provides an alternative explanation to the "negative cilia" model used by others to rationalize observed thromboresistance on PEG-sulfonate coatings.
Publisher: Elsevier BV
Date: 2001
DOI: 10.1016/S0001-8686(00)00059-2
Abstract: The diffusion coefficients of polystyrene latex spheres and hematite particles in both Newtonian and elastic liquids have been measured using dynamic light scattering. The diffusion coefficients of the latex particles measured in glycerol/water (Newtonian) solutions obey Stokes-Einstein behaviour over a range of solvent viscosities and temperatures. Two apparent diffusion coefficients for the particles are measured in visco-elastic polyacrylamide and polyacrylate solutions and are designated Dfast and Dslow. The apparent fast diffusion coefficients measured in the elastic solutions show an increase to a maximum, above that measured in the solvent water, with increasing polyelectrolyte concentration. At higher polyelectrolyte concentrations the observed Dfast values decrease below the value obtained in the solvent water. Dfast increases with the scattering vector squared (q2) while Dslow, is independent of q2.
Publisher: Royal Society of Chemistry (RSC)
Date: 2014
DOI: 10.1039/C4CP03335C
Abstract: Incorporation of hydrophobic curcumin (yellow discs) into a polyelectrolyte multilayer made from PDADMAC and PSS requires the use of water : ethanol solution. Release from the multilayer only occurs if the multilayer is dried prior to immersion in the electrolyte release solution.
Publisher: Elsevier BV
Date: 11-2010
DOI: 10.1016/J.JHIN.2010.07.001
Abstract: Established methods for cleaning and sterilising biomedical devices may achieve removal of bioburden only at the macroscopic level while leaving behind molecular levels of contamination (mainly proteinaceous). This is of particular concern if the residue might contain prions. We investigated at the molecular level the removal of model and real-life proteinaceous contamination from model and practical surfaces by air plasma (ionised air) treatment. The surface-sensitive technique of X-ray photoelectron spectroscopy (XPS) was used to assess the removal of proteinaceous contamination, with the nitrogen (N1s) photoelectron signal as its marker. Model proteinaceous contamination (bovine serum albumin) adsorbed on to a model surface (silicon wafer) and the residual proteinaceous contamination resulting from incubating surgical stainless steel (a practical biomaterial) in whole human blood exhibited strong N1s signals [16.8 and 18.5 atomic percent (at.%), respectively] after thorough washing. After 5min air plasma treatment, XPS detected no nitrogen on the s le surfaces, indicating complete removal of proteinaceous contamination, down to the estimated XPS detection limit 10ng/cm(2). Applying the same plasma treatment, the 7.7at.% nitrogen observed on a clinically cleaned dental bur was reduced to a level reflective of new, as-received burs. Contact angle measurements and atomic force microscopy also indicated complete molecular-level removal of the proteinaceous contamination upon air plasma treatment. This study demonstrates the effectiveness of air plasma treatment for removing proteinaceous contamination from both model and practical surfaces and offers a method for ensuring that no molecular residual contamination such as prions is transferred upon re-use of surgical and dental instruments.
Publisher: Elsevier BV
Date: 03-2005
DOI: 10.1016/J.JCIS.2004.09.048
Abstract: Interfacial chemistry and rheological behavior of talc suspensions as a function of pH, talc solid content, and type and concentration of ions have been investigated using electrokinetic measurements, rheology, settling behavior, and solution analysis. Zeta potential measurements show a strong dependence on the pH history of the talc suspension that only occurs when the surface area (solid content) of the talc is high. Particle interactions measured through dispersion yield stress measurements show a similar dependence. Talc is a magnesium silicate mineral and the dependence seen in the electrokinetic properties in this study has been attributed to Mg(II) dissolution at low pH, and has been confirmed by solution analysis. At high solid content (>20 wt%), pronounced Mg(II) ion dissolution occurs at low pH values. Formation and adsorption of electropositive Mg(II) hydrolysis products occurs at high pH (>9), and these lead to zeta potential reduction and, at high solid contents, charge reversal. Particle interactions reflect the surface chemistry behavior. Consequently, for a freshly prepared suspension at high pH, the yield stress is lower compared to after the pH has been taken to 5 and subsequently increased.
Publisher: Elsevier BV
Date: 03-2002
Abstract: The diffusion coefficients of hematite particles in polyelectrolyte solution have been investigated using dynamic light scattering. Two apparent diffusion coefficients, a fast and a slow diffusional mode, are observed for the hematite particles in high-molecular-weight sodium polyacrylate solution at pH 10.5. The slow diffusion coefficient (Dslow) shows a decrease with increase in polyelectrolyte concentration. The fast diffusion coefficient (Dfast) shows an increase to a maximum with increasing polyelectrolyte concentration and then a rapid decrease as the polyelectrolyte concentration increases further. With an increase in ionic strength from 10(-4) to 0.1 M NaNO3, the maximum value of Dfast increased in magnitude, while the polyacrylate concentration at which the maximum occurs is seen to increase. The dependence of Dfast on the measurement angle indicates that it is coupled to the fluctuations of the chains. The observed behavior is attributed to the hematite probe particle sensing both macroscopic (viscous) and elastic fluctuations associated with the polyelectrolyte motion.
Publisher: American Chemical Society (ACS)
Date: 07-10-2015
DOI: 10.1021/ACS.LANGMUIR.5B01812
Abstract: The formation of fucoidan/chitosan-based polyelectrolyte multilayers (PEMs) has been studied with in situ Fourier transform infrared (FTIR) spectroscopy. Attenuated total reflectance (ATR) FTIR spectroscopy has been used to follow the sequential build-up of the multilayer, with peaks characteristic of each polymer being seen to increase in intensity with each respective adsorption stage. In addition, spectral processing has allowed for the extraction of spectra from in idual adsorbed layers, which have been used to provide unambiguous determination of the adsorbed mass of the PEM at each stage of formation. The PEM was seen to undergo a transition in growth regimes during build-up: from supra-linear to linear. In addition, the wettability of the PEM has been probed at each stage of the build-up, using the captive bubble contact angle technique. The contact angles were uniformly low, but showed variation in value depending on the nature of the outer polymer layer, and this variation correlated with the overall percentage hydration of the PEM (determined from FTIR and quartz crystal microbalance data). The nature of the hydration water within the polyelectrolyte multilayer has also been studied with FTIR spectroscopy, specifically in situ synchrotron ATR FTIR microscopy of the multilayer confined between two solid surfaces. The acquired spectra have enabled the hydrogen bonding environment of the PEM hydration water to be determined. The PEM hydration water is seen to have an environment in which it is subject to fewer hydrogen bonding interactions than in bulk electrolyte solution.
Publisher: Elsevier BV
Date: 07-2006
DOI: 10.1016/J.JCIS.2006.03.015
Abstract: The mechanisms of high-molecular-weight polyacrylamide nonionic homopolymer and 25 mol% anionic acrylate-substituted copolymer adsorption onto iron oxide particles were investigated via DRIFT and UV-vis spectroscopies at three pH values (6, 8.5, and 11). While electrostatic interactions play an important role in charged polymer adsorption, this information is not spectroscopically available. At pH values above and below pH 8.5 (the isoelectric point for the anionic polymer), bidentate chelation and hydrogen bonding were the main adsorption mechanisms. At the isoelectric point, monodentate chelation was observed to be the main mode of adsorption, along with hydrogen bonding. For the nonionic polymer, in all cases, hydrogen bonding through the carbonyl group was the main mode of adsorption. The adsorption of both polymers conformed well to the Freundlich model, suggesting that the adsorbed polymer amount increases with increasing polymer concentration up to 7500 g/t solid, rather than approaching monolayer coverage. Spectroscopic evidence was found to suggest that hydrolysis of nonionic polyacrylamide occurs at high pH.
Publisher: Elsevier BV
Date: 2017
DOI: 10.1016/J.EJPS.2016.10.026
Abstract: Oral absorption of weakly basic drugs (e.g. cinnarizine (CIN)) is limited by their pH dependent precipitation in intestinal conditions. To overcome this challenge, a novel drug delivery system composed of solid lipid and porous silica, namely silica encapsulated solid lipid (SESL) particles, was developed via hot homogenization of melted lipid dispersion, followed by ultra-sonication of the silica stabilized homogenized melted lipid dispersion. Scanning electron microscope (SEM) images of the SESL formulation revealed non-spherical and aggregated hybrid particles, with rough exterior and structured nanoparticles visible on the surface. A 1.5, 2.2 and 7-fold improvement in the dissolution of CIN was observed for the SESL particles, under simulated intestinal non-digesting conditions, in comparison to the drug loaded in solid lipid (CIN-SL) matrix, drug loaded in porous silica (CIN-PS) and pure drug powder. Under simulated intestinal digestive condition, significant improvement in the drug solubilization was reported for the SESL formulation in compared to the in idual drug loaded systems i.e. CIN-PS and CIN-SL. Thereby, silica encapsulated solid lipid system provides a promising oral delivery approach for poorly water soluble weakly basic drugs.
Publisher: Elsevier BV
Date: 02-2013
DOI: 10.1002/JPS.23406
Publisher: MDPI AG
Date: 04-07-2023
DOI: 10.3390/PHARMACEUTICS15071886
Abstract: Paclitaxel (PTX) and 5-fluorouracil (5-FU) are clinically relevant chemotherapeutics, but both suffer a range of biopharmaceutical challenges (e.g., either low solubility or permeability and limited controlled release from nanocarriers), which reduces their effectiveness in new medicines. Anticancer drugs have several major limitations, which include non-specificity, wide biological distribution, a short half-life, and systemic toxicity. Here, we investigate the potential of liposome-micelle-hybrid (LMH) carriers (i.e., drug-loaded micelles encapsulated within drug-loaded liposomes) to enhance the co-formulation and delivery of PTX and 5-FU, facilitating new delivery opportunities with enhanced chemotherapeutic performance. We focus on the combination of liposomes and micelles for co-delivery of PTX and 5_FU to investigate increased drug loading, improved solubility, and transport ermeability to enhance chemotherapeutic potential. Furthermore, combination chemotherapy (i.e., containing two or more drugs in a single formulation) may offer improved pharmacological performance. Compared with in idual liposome and micelle formulations, the optimized PTX-5FU-LMH carriers demonstrated increased drug loading and solubility, temperature-sensitive release, enhanced permeability in a Caco-2 cell monolayer model, and cancer cell eradication. LMH has significant potential for cancer drug delivery and as a next-generation chemotherapeutic.
Publisher: Elsevier BV
Date: 1999
Publisher: MDPI AG
Date: 23-03-2023
DOI: 10.3390/PHARMACEUTICS15041037
Abstract: Intracellular bacteria are inaccessible and highly tolerant to antibiotics, hence are a major contributor to the global challenge of antibiotic resistance and recalcitrant clinical infections. This, in tandem with stagnant antibacterial discovery, highlights an unmet need for new delivery technologies to treat intracellular infections more effectively. Here, we compare the uptake, delivery, and efficacy of rif icin (Rif)-loaded mesoporous silica nanoparticles (MSN) and organo-modified (ethylene-bridged) MSN (MON) as an antibiotic treatment against small colony variants (SCV) Staphylococcus aureus (SA) in murine macrophages (RAW 264.7). Macrophage uptake of MON was five-fold that of equivalent sized MSN and without significant cytotoxicity on human embryonic kidney cells (HEK 293T) or RAW 264.7 cells. MON also facilitated increased Rif loading with sustained release, and seven-fold increased Rif delivery to infected macrophages. The combined effects of increased uptake and intracellular delivery of Rif by MON reduced the colony forming units of intracellular SCV-SA 28 times and 65 times compared to MSN-Rif and non-encapsulated Rif, respectively (at a dose of 5 µg/mL). Conclusively, the organic framework of MON offers significant advantages and opportunities over MSN for the treatment of intracellular infections.
Publisher: Springer Science and Business Media LLC
Date: 05-04-2016
DOI: 10.1208/S12248-015-9864-Z
Abstract: Low dissolution of drugs in the intestinal fluid can limit their effectiveness in oral therapies. Here, a novel porous silica-supported solid lipid system was developed to optimize the oral delivery of drugs with limited aqueous solubility. Using lovastatin (LOV) as the model poorly water-soluble drug, two porous silica-supported solid lipid systems (SSL-A and SSL-S) were fabricated from solid lipid (glyceryl monostearate, GMS) and nanoporous silica particles Aerosil 380 (silica-A) and Syloid 244FP (silica-S) via immersion/solvent evaporation. SSL particles demonstrated significantly higher rate and extent of lipolysis in comparison with the pure solid lipid, depending on the lipid loading levels and the morphology. The highest lipid digestion was observed when silica-S was loaded with 34% (w/w) solid lipid, and differential scanning calorimeter (DSC) analysis confirmed the encapsulation of up to 2% (w/w) non-crystalline LOV in this optimal SSL-S formulation. Drug dissolution under non-digesting intestinal conditions revealed a three- to sixfold increase in dissolution efficiencies when compared to the unformulated drug and a LOV-lipid suspension. Furthermore, the SSL-S provided superior drug solubilization under simulated intestinal digesting condition in comparison with the drug-lipid suspension and drug-loaded silica. Therefore, solid lipid and nanoporous silica provides a synergistic effect on optimizing the solubilization of poorly water-soluble compound and the solid lipid-based porous carrier system provides a promising delivery approach to overcome the oral delivery challenges of poorly water-soluble drugs.
Publisher: American Chemical Society (ACS)
Date: 09-04-2005
DOI: 10.1021/LA047352U
Abstract: The adsorption of a polyacrylamide (MW 14600) and two polysaccharides (MW 9260 and 706 x 10(3)) onto model silica surfaces of different hydrophobicities was investigated. In all cases, adsorption adhered to the Freundlich isotherm, reflecting the heterogeneous character of the solid substrates. The latter strongly influenced the character of the adsorbed polymer, with morphologies from chainlike structures to thin films and patches being observed. Surface roughness, polymer type, and molecular weight also play roles in controlling adsorbed polymer morphology. Surface wettability is strongly influenced by the thickness of the adsorbed layer.
Publisher: Wiley
Date: 20-05-2005
DOI: 10.1002/JBM.A.30364
Abstract: Vitronectin (Vn) is an adhesive protein in the plasma serum and plays an important role in cell attachment, spreading, and proliferation. The interactions between protein bovine vitronectin layers adsorbed onto a silica probe and a mica surface have been investigated with the use of atomic force microscopy (AFM). Adsorption of vitronectin was confirmed by XPS surface analysis. The force-separation curves and pull-off forces were measured as a function of ionic strength and solution pH. The pull-off force (adhesion force) decreased as the salt concentration increased, which suggests that some binding domains of this protein may associate with the ionic species and reduce its binding ability. Discrete jumps, or discontinuities, in the separation force curve were observed to extend to a maximum of 300 nm, evidence that the protein molecules bridge between the surfaces. As a function of pH, the adhesion force on separation of the protein-coated surfaces showed a maximum at pH 5 (i.e.p. of vitronectin), decreasing in magnitude at lower and higher pH values. At pH 5, the approaching curves illustrated a jump-in force whereas for pH values away from 5, the approaching force curves were repulsive. Correlation of the interaction forces with Vn conformational changes in different pH environments, directly visualized with the use of AFM imaging, was developed. In its i.e.p. region, the Vn molecular conformation appeared to be dense and compact. Significantly, at wounds/injured sites the pH is low (approximately 5) which this study discovered to facilitate adsorption and formation of vitronectin aggregates, known to trigger their subsequent biological functions.
Publisher: Elsevier BV
Date: 2005
Publisher: Elsevier BV
Date: 09-2020
Publisher: MDPI AG
Date: 18-01-2022
DOI: 10.3390/PHARMACEUTICS14020221
Abstract: Liposomes are widely used as carriers for anticancer drugs due to their ability to prolong the retention of encapsulated drugs in blood plasma while directing their distribution increasingly into tumor tissue. We report on the development of stealth liposomal formulations for the common chemotherapy drug 5-fluorouracil, where pharmacokinetic studies were undertaken using a microdialysis probe to specifically quantify drug accumulation in tumor, which was contrasted to drug exposure to healthy tissue. Greater accumulation of the drug into the tumor than into healthy subcutaneous tissue was observed for neutral and cationic liposomal 5-fluorouracil polymer complexes in comparison to the conventional delivery by an injected solution. Increased drug accumulation in tumor also correlated to reduced tumor growth. This research has generated new mechanistic insight into liposomal-specific delivery to tumors with potential to improve the efficacy and reduce the toxicity of chemotherapy.
Publisher: Informa UK Limited
Date: 20-11-2019
DOI: 10.1080/03639045.2018.1542709
Abstract: Porous silica-based drug delivery systems have shown considerable promise for improving the oral delivery of poorly water-soluble drugs. More specifically, micro- and meso-porous silica carriers have high surface areas with associated ability to physically adsorb high-drug loads in a molecular or amorphous form this allows molecular state drug release in aqueous gastrointestinal environments, potential for supersaturation, and hence facilitates enhanced absorption and increased bioavailability. This review focuses primarily on the ability of porous silica materials to modulate in vitro drug release and enhance in vivo biopharmaceutical performance. The key considerations identified and addressed are the physicochemical properties of the porous silica materials (e.g. the particle and pore size, shape, and surface chemistry), drug specific properties (e.g. pKa, solubility, and nature of interactions with the silica carrier), potential for both immediate and controlled release, drug release mechanisms, potential for surface functionalization and inclusion of precipitation inhibitors, and importance of utilizing relevant and effective in vitro dissolution methods with discriminating dissolution media that provides guidance for in vivo outcomes (i.e. IVIVC).
Publisher: Elsevier BV
Date: 08-1998
Publisher: MDPI AG
Date: 21-07-2020
DOI: 10.3390/PHARMACEUTICS12070687
Abstract: The unique nanostructured matrix obtained by silica-lipid hybrids (SLHs) is well known to improve the dissolution, absorption, and bioavailability of poorly water-soluble drugs (PWSDs). The aim of this study was to investigate the impact of: (i) drug load: 3–22.7% w/w, (ii) lipid type: medium-chain triglyceride (Captex 300) and mono and diester of caprylic acid (Capmul PG8), and (iii) silica nanostructure: spray dried fumed silica (FS) and mesoporous silica (MPS), on the in vitro dissolution, solubilization, and solid-state stability of the model drug fenofibrate (FEN). Greater FEN crystallinity was detected at higher drug loads and within the MPS formulations. Furthermore, an increased rate and extent of dissolution was achieved by FS formulations when compared to crystalline FEN (5–10-fold), a commercial product APO-fenofibrate (2.4–4-fold) and corresponding MPS formulations (2–4-fold). Precipitation of FEN during in vitro lipolysis restricted data interpretation, however a synergistic effect between MPS and Captex 300 in enhancing FEN aqueous solubilization was attained. It was concluded that a balance between in vitro performance and drug loading is key, and the optimum drug load was determined to be between 7–16% w/w, which corresponds to (200–400% equilibrium solubility in lipid Seq). This study provides valuable insight into the impact of key characteristics of SLHs, in constructing optimized solid-state lipid-based formulations for the oral delivery of PWSDs.
Publisher: Elsevier BV
Date: 2006
DOI: 10.1016/J.JCIS.2005.06.034
Abstract: Orthokinetic flocculation of clay dispersions at pH 7.5 and 22 degrees C has been investigated to determine the influence of interfacial chemistry and shear on dewatering and particle interactions behavior. Modification of pulp chemistry and behavior was achieved by using kaolinite and Na-exchanged (swelling) smectite clay minerals, alent metal ions (Ca(II), Mn(II)) as coagulants and anionic polyacrylamide copolymer (PAM A) and non-ionic polyacrylamide homopolymer (PAM N) as flocculants. The pivotal role of shear, provided by a two-blade paddle impeller, was probed as a function of agitation rate (100-500 rpm) and time (15/60 s). Particle zeta potential and adsorption isotherms were measured to quantify the interfacial chemistry, whilst rheology and cryogenic SEM were used to investigate particle interactions and floc structure and aggregate network, respectively. Osmotic swelling, accompanied by the formation of "honeycomb" particle network structure and high yield stress, was produced by the Na-exchanged smectite, but not kaolinite, dispersions. Dispersion of the clay particles in 0.05 M Ca(II) or Mn(II) solution led to a marked reduction in particle zeta potential, complete suppression of swelling, honeycomb network structure collapse and a concomitant reduction in shear yield stress of smectite pulps. Optimum conditions for improved, orthokinetic flocculation performance of negatively charged clay particles, reflecting faster settling flocs comprised (i) coagulation, (ii) moderate agitation rate, (iii) shorter agitation time, and (iv) anionic rather than non-ionic PAM. The optimum dewatering rates were significantly higher than those produced by standard, manual-mixing flocculation techniques (plunging and cylinder inversion) commonly used in industry for flocculant trials. The optimum flocculation conditions did not, however, have a significant impact on the final sediment solid content of 20-22 wt%. Further application of shear to pre-sedimented pulps improved consolidation by 5-7 wt% solid. Higher shear yield stresses and greater settling rates were displayed by PAM A based than PAM N based pulps and this is attributed to the former's more expanded interfacial conformation and greater clay particles bridging ability. It appears that the intrinsic clay particles' physico-chemical properties and interactions limit compact pulp consolidation.
Publisher: Elsevier BV
Date: 06-2006
DOI: 10.1016/J.COLSURFB.2006.03.002
Abstract: Interaction forces, deformation and nano-rheology of in idual red blood cells in physiologically relevant solution conditions have been determined by colloid probe atomic force microscopy (AFM). On approach of the physically immobilised cell and silica glass spherical probe surfaces, deformation of the red blood cell was observed in the force curves. At low levels of deformation, spring constants were determined in the range 3-6 m Nm(-1), whereas for higher levels of deformation, the forces increase non-linearly and on retraction, significant force curve hysteresis is observed (i.e. lower forces upon retraction). The extent of force curve hysteresis was dependent on both the drive velocity and loading force, typical of a viscoelastic system. The response of the red blood cell has been described by viscoelastic theory, where the short and long time scale elastic moduli and relaxation times are determined, i.e. the cell's nano-rheological properties elucidated. In addition to a time independent elastic modulus of 4.0 x 10(3)Nm(-2) at low levels of deformation, time-dependent elastic moduli ranges are observed (3.5 x 10(4) to 5.5 x 10(4)Nm(-2) at intermediate levels of deformation and 1.5 x 10(5) to 3.0 x 10(5)Nm(-2) at higher levels of deformation). That is, one elastic and more than one viscoelastic response to the red blood cell deformation is evident, which is considered to reflect the cellular structure.
Publisher: American Chemical Society (ACS)
Date: 17-11-2005
DOI: 10.1021/LA052143A
Abstract: Interaction forces between surfaces designed to be protein resistant and fibrinogen (Fg) were investigated in phosphate-buffered saline with colloid probe atomic force microscopy. The surfaces of the silica probes were coated with a layer of fibrinogen molecules by adsorption from the buffer. The technique of low-power, pulsed AC plasma polymerization was used to make poly(ethylene glycol) (PEG)-like coatings on poly(ethylene teraphthalate) by using diethylene glycol vinyl ether as the monomer gas. The degree of PEG-like nature of the films was controlled by use of a different effective plasma power in the chamber for each coating, ranging from 0.6 to 3.6 W. This produced a series of thin films with a different number of ether carbons, as assessed by X-ray photoelectron spectroscopy. The interaction force measurements are discussed in relation to trends observed in the reduction of fibrinogen adsorption, as determined quantitatively by (125)I radio-labeling. The plasma polymer coatings with the greatest protein-repelling properties were the most PEG-like in nature and showed the strongest repulsion in interaction force measurements with the fibrinogen-coated probe. Once forced into contact, all the surfaces showed increased adhesion with the protein layer on the probe, and the strength and extension length of adhesion was dependent on both the applied load and the plasma polymer surface chemistry. When the medium was changed from buffer to water, the adhesion after contact was eliminated and only appeared at much higher loads. This indicates that the structure of the fibrinogen molecules on the probe is changed from an extended conformation in buffer to a flat conformation in water, with the former state allowing for stronger interaction with the polymer chains on the surface. These experiments underline the utility of aqueous surface force measurements toward understanding protein-surface interactions, and developing nonfouling surfaces that confer a steric barrier against protein adsorption.
Publisher: Elsevier BV
Date: 11-2005
Publisher: Elsevier BV
Date: 09-1999
Publisher: Elsevier BV
Date: 10-2021
Publisher: Elsevier BV
Date: 03-2006
Publisher: Elsevier BV
Date: 05-2022
DOI: 10.1016/J.IJPHARM.2022.121695
Abstract: The concomitant administration of oral drugs with food can result in significant changes in bioavailability, leading to variable pharmacokinetics and considerable clinical implications, such as over- or under-dosing. Consequently, there is increasing demand for bio-enabling formulation strategies to reduce variability in exposure between the fasted and fed state and/or mitigate the pharmaceutical food effect. The current review critically evaluates technologies that have been implemented to overcome the positive food effects of pharmaceutical drugs, including, lipid-based formulations, nanosized drug preparations, cyclodextrins, amorphisation and solid dispersions, prodrugs and salts. Additionally, improved insight into preclinical models for predicting the food effect is provided. Despite the wealth of research, this review demonstrates that application of optimal formulation strategies to mitigate the positive food effects and the evaluation in preclinical models is not a universal approach, and improved standardisation of models to predict the food effects would be desirable. Ultimately, the successful reformulation of specific drugs to eliminate the food effect provides a panoply of advantages for patients with regard to clinical efficacy and compliance.
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C4SM02552K
Abstract: Polyelectrolyte multilayers of fucoidan with chitosan have film characteristics that depend on the species of seaweed from which the fucoidan is extracted. Acetylation of the fucoidan (and altered molecular weight) is implicated in the formation of denser, less hydrated multilayers.
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C4AN01768D
Abstract: Depletion of .7% WBCs enabling tumor cell recovery from blood with nano-rough PDMS microfluidic negative enrichment devices functionalised with anti-CD45.
Publisher: American Chemical Society (ACS)
Date: 03-2006
DOI: 10.1021/LA052303I
Abstract: Advancing water contact angles were measured on freshly cleaved talc faces as well as on talc particles. The intrinsic hydrophobicity of talc was shown to be due to the dominance of the apolar components of the work of adhesion. Polyacrylamides and polysaccharides adsorb onto the surface of talc, displaying strikingly different morphologies. Adsorbed amount, apparent layer thickness, and polymer structure control talc wettability.
Publisher: Elsevier BV
Date: 09-2014
DOI: 10.1002/JPS.23914
Publisher: Elsevier BV
Date: 10-2005
Publisher: Wiley
Date: 28-01-2008
DOI: 10.1002/APJ.112
No related grants have been discovered for Kristen Bremmell.