ORCID Profile
0000-0003-2013-8720
Current Organisation
RMIT University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
In Research Link Australia (RLA), "Research Topics" refer to ANZSRC FOR and SEO codes. These topics are either sourced from ANZSRC FOR and SEO codes listed in researchers' related grants or generated by a large language model (LLM) based on their publications.
Structural engineering | Civil engineering | Infrastructure engineering and asset management | Construction materials
Publisher: Elsevier BV
Date: 04-2022
Publisher: American Concrete Institute
Date: 2020
DOI: 10.14359/51725989
Publisher: Elsevier BV
Date: 03-2023
Publisher: Elsevier BV
Date: 03-2018
Publisher: American Society of Civil Engineers (ASCE)
Date: 11-2018
Publisher: Informa UK Limited
Date: 29-01-2022
Publisher: Springer Science and Business Media LLC
Date: 21-02-2020
Publisher: Informa UK Limited
Date: 20-04-2022
Publisher: American Society of Civil Engineers (ASCE)
Date: 07-2021
Publisher: Elsevier BV
Date: 10-2021
Publisher: MDPI AG
Date: 09-01-2022
DOI: 10.3390/SU14020695
Abstract: Concrete has always been indispensable as a material for the engineering and construction of hydraulic structures (e [...]
Publisher: Informa UK Limited
Date: 17-09-2019
Publisher: MDPI AG
Date: 19-01-2023
Abstract: This review presents the research conducted to date in the field of cement-based composites reinforced with waste paper-based cellulose fibres, focusing on their composition, mechanical properties, and durability characteristics. The literature demonstrates that the properties of raw material (depending on their own chemical composition) significantly influence the formation of the cement composite binders. When considering fresh properties, the presence of silica and magnesium compounds generally lead to favourable effects on the setting of the cement composite when combined with waste paper cellulose fibre. Reduction in density values, i.e., approximately 25%, was observed with the inclusion of waste paper fibres from 20 to 80% in cement composites. The homogeneous dispersion of fibres in the matrix is one of the crucial factors to achieve in order to develop composites with well-balanced mechanical properties incorporating waste paper cellulose fibres. Hence, dispersion of fibres can be improved by increasing water quantity corresponding to the optimal value, which was a water/cement ratio of 0.64 leading to optimum strength properties of the composite. Even though the effect of fibre dispersion in the matrix improves with the addition of water, higher porosity and voids govern the strength properties beyond an optimum water-to-cement ratio. Higher porosity leads to an increase in the water absorption and a lowering of the thermal conductivity properties with the addition of paper fibre in cement binders. Paper fibre absorbs a high amount of water leading to higher water absorption. This phenomenon is related to the hydrophilic nature of cellulosic fibres absorbing some volume of water due to their microporous structure.
Publisher: MDPI AG
Date: 08-05-2023
DOI: 10.3390/SU15097718
Abstract: Traditionally, the construction industry has predominantly used Portland cement (PC) to manufacture bricks, as it is one of the most-commonly available building materials. However, the employment of waste industrial material for brick production can lead to a significant improvement in terms of sustainability within the construction sector. Geopolymer bricks made from brown coal fly ash, a promising industrial waste by-product, serve as a potential alternative. Conducting a life cycle assessment (LCA), this study thoroughly evaluated the entire manufacturing process’s environmental impact, from source material acquisition and transportation to brick manufacturing, distribution, usage, and end-of-life, for brown coal bricks as compared to PC bricks. The LCA of the brown coal bricks revealed that their primary environmental impacts stemmed from the raw material manufacturing and usage, while exhibiting substantial reductions in ozone depletion, water depletion, and metal depletion. These findings highlighted the environmental advantages of the brown coal bricks and their potential to revolutionize sustainable construction practices.
Publisher: Springer Science and Business Media LLC
Date: 11-08-2022
Publisher: Springer Science and Business Media LLC
Date: 05-11-2020
Publisher: Informa UK Limited
Date: 10-05-2021
Publisher: Elsevier BV
Date: 10-2016
Publisher: MDPI AG
Date: 28-07-2020
DOI: 10.3390/APP10155207
Abstract: Quarry aggregate reserves are depleting rapidly within Australia and the rest of the world due to an increasing demand for aggregates driven by expansion in construction. The annual production of premix concrete in Australia is approximately 30 million cubic meters, while 3–5% of concrete delivered to site remains unused and is disposed of in landfill or crushing plants. The production of coarse aggregates using this waste concrete is potentially a sustainable approach to reduce environmental and economic impact. A testing program has been conducted to investigate mechanical performance and permeation characteristics of concrete produced using a novel manufactured coarse aggregate recycled directly from fresh premix concrete. The recycled coarse aggregate (RCA) concrete satisfied the specified 28-day design strength of 25 MPa and 40 MPa at 28 days and a mean compressive strength of 60 MPa at 90 days. Aggregate grading was observed to determine strength development, while low water absorption, low drying shrinkage, and higher packing density indicate that the RCA concrete is a high-quality material with a dense pore structure. The rough fracture surface of the aggregate increased the bond between C-S-H gel matrix and RCA at the interfacial transition zone. Furthermore, a good correlation was observed between compressive strength and all other mechanical properties displayed by the quarried aggregate concrete. The application of design equations as stated in Australian standards were observed to provide a conservative design for RCA concrete structures based on the mechanical properties.
Publisher: MDPI AG
Date: 06-06-2021
Abstract: Incorporating recycled plastic waste in concrete manufacturing is one of the most ecologically and economically sustainable solutions for the rapid trends of annual plastic disposal and natural resource depletion worldwide. This paper comprehensively reviews the literature on engineering performance of recycled high-density polyethylene (HDPE) incorporated in concrete in the forms of aggregates or fiber or cementitious material. Optimum 28-days’ compressive and flexural strength of HDPE fine aggregate concrete is observed at HDPE-10 and splitting tensile strength at HDPE-5 whereas for HDPE coarse aggregate concrete, within the range of 10% to 15% of HDPE incorporation and at HDPE-15, respectively. Similarly, 28-days’ flexural and splitting tensile strength of HDPE fiber reinforced concrete is increased to an optimum of 4.9 MPa at HDPE-3 and 4.4 MPa at HDPE-3.5, respectively, and higher than the standard lain concrete matrix (HDPE-0) in all HDPE inclusion levels. Hydrophobicity, smooth surface texture and non-reactivity of HDPE has resulted in weaker bonds between concrete matrix and HDPE and thereby reducing both mechanical and durability performances of HDPE concrete with the increase of HDPE. Overall, this is the first ever review to present and analyze the current state of the mechanical and durability performance of recycled HDPE as a sustainable construction material, hence, advancing the research into better performance and successful applications of HDPE concrete.
Publisher: American Society of Civil Engineers (ASCE)
Date: 09-2020
Publisher: Informa UK Limited
Date: 16-02-2021
Publisher: Informa UK Limited
Date: 11-03-2022
Publisher: MDPI AG
Date: 12-02-2021
DOI: 10.3390/APP11041648
Abstract: The potential application of alkali-activated material (AAM) as an alternative binder in concrete to reduce the environmental impact of cement production has now been established. However, as the production and availability of the primarily utilized waste materials, such as fly Ash and blast furnace slag, decrease, it is necessary to identify alternative materials. One such material is clay, which contains aluminosilicates and is abundantly available across the world. However, the reactivity of untreated low-grade clay can be low. Calcination can be used to activate clay, but this can consume significant energy. To address this issue, this paper reports the investigation of two calcination methodologies, utilizing low-temperature and high-temperature regimes of different durations, namely 24 h heating at 120 °C and 5 h at 750 °C and, and the results are compared with those of the mechanical performance of the AAM produced with untreated low-grade clay. The investigation used two alkali dosages, 10% and 15%, with an alkali modulus varying from 1.0 to 1.75. An increase in strength was observed with calcination of the clay at both 120 and 750 °C compared to untreated clay. Specimens with a dosage of 10% showed enhanced performance compared to those with 15%, with Alkali Modulus (AM) of 1.0 giving the optimal strength at 28 days for both dosages. The strengths achieved were in the range 10 to 20 MPa, suitable for use as concrete masonry brick. The conversion of Al (IV) is identified as the primary factor for the observed increase in strength.
Publisher: Elsevier BV
Date: 06-2021
Publisher: American Concrete Institute
Date: 2020
DOI: 10.14359/51727019
Publisher: Elsevier BV
Date: 11-2021
Publisher: Springer Science and Business Media LLC
Date: 09-12-2022
Publisher: American Society of Civil Engineers (ASCE)
Date: 2023
Publisher: American Society of Civil Engineers (ASCE)
Date: 05-2020
Publisher: Elsevier BV
Date: 2023
Publisher: Elsevier BV
Date: 2021
Publisher: MDPI AG
Date: 02-08-2019
DOI: 10.3390/APP9153138
Abstract: This study reports the effect of heat curing at 120 °C on the geopolymeric reaction and strength evolution in brown coal fly ash based geopolymer mortar and concrete. Moreover, an examination of this temperature profile of large size geopolymer concrete specimens is also reported. The specimen temperature and size were observed to influence the conversion from the glassy (amorphous) phases to the crystalline phases and the microstructure development of the geopolymer. The temperature profile could be ided into three principal stages which correlated well with the proposed reaction mechanism for class F fly ash geopolymers. The geopolymerisation progressed more rapidly for the mortar specimens than the concrete specimens with 12 to 14 h providing an optimum curing time for the 50 mm mortar cubes and 24 h being the optimum time for the 100 mm concrete cubes. The 50 mm and 100 mm concrete specimens’ compressive strengths in excess of 30 MPa could be obtained at 7 days. The structural integrity was not achieved at the center of 200 mm and 300 mm concrete specimens following 24 h curing at 120 °C. Hence, the optimal curing time required to achieve the best compressive strength for brown coal geopolymer was identified as being dependent on the specimen size.
Publisher: American Concrete Institute
Date: 10-2017
DOI: 10.14359/51689779
Publisher: Elsevier BV
Date: 09-2020
Publisher: American Society of Civil Engineers (ASCE)
Date: 12-2017
Publisher: Elsevier BV
Date: 08-2020
Publisher: American Society of Civil Engineers (ASCE)
Date: 04-2023
Publisher: Elsevier BV
Date: 12-2018
Publisher: Elsevier BV
Date: 10-2020
Publisher: Elsevier BV
Date: 10-2015
Publisher: Elsevier BV
Date: 07-2017
Publisher: MDPI AG
Date: 15-03-2021
Abstract: Despite extensive in-depth research into high calcium fly ash geopolymer concretes and a number of proposed methods to calculate the mix proportions, no universally applicable method to determine the mix proportions has been developed. This paper uses an artificial neural network (ANN) machine learning toolbox in a MATLAB programming environment together with a Bayesian regularization algorithm, the Levenberg-Marquardt algorithm and a scaled conjugate gradient algorithm to attain a specified target compressive strength at 28 days. The relationship between the four key parameters, namely water/solid ratio, alkaline activator/binder ratio, Na2SiO3/NaOH ratio and NaOH molarity, and the compressive strength of geopolymer concrete is determined. The geopolymer concrete mix proportions based on the ANN algorithm model and contour plots developed were experimentally validated. Thus, the proposed method can be used to determine mix designs for high calcium fly ash geopolymer concrete in the range 25–45 MPa at 28 days. In addition, the design equations developed using the statistical regression model provide an insight to predict tensile strength and elastic modulus for a given compressive strength.
Publisher: American Concrete Institute
Date: 09-2019
DOI: 10.14359/51716815
Start Date: 03-2023
End Date: 02-2026
Amount: $431,154.00
Funder: Australian Research Council
View Funded ActivityStart Date: 2023
End Date: 12-2027
Amount: $5,000,000.00
Funder: Australian Research Council
View Funded Activity