Sheikh Ahmad Izaddin Sheikh Mohd Ghazali

Adsorption-Desorption Profile of Methylene Blue Dye on Raw and Acid Activated Kaolinite

Publisher: Universitas Gadjah Mada

Date: 10-06-2020

DOI: 10.22146/IJC.43552

Abstract: The efficiencies of raw (RK) and acid activated (0.5 M AAK) kaolinite clay minerals to remove methylene blue (MB) dyes in aqueous solution were investigated and compared. The 0.5 M AAK was prepared by treatment of RK in dilute 0.5 M HCl aqueous solution under reflux. Kaolinite adsorbents were characterized and their MB removal performances were evaluated via the batch method. MB desorption from spent kaolinites was investigated at pH 4 to 8. The MB removal was increased with increasing initial dye concentration, agitation speed and adsorbent dosage in 60 min reaction time at pH 6. Both kaolinites showed high MB removal (up to 97%). The Freundlich model has the best-fit equilibrium adsorption isotherm model for RK and 0.5 M AAK. The kinetic data for both adsorbents showed strong agreement with the pseudo second order kinetic model (r2 0.98). Nevertheless, the spent RK adsorbent demonstrated a significant higher MB retention than 0.5 M AAK in desorption experiments. Kaolinite clays have great potential as cost-effective materials for dyes removal in wastewater treatment.

Magnesium-Impregnated Biochar for the Removal of Total Phosphorous from Artificial Human Urine

Publisher: Science Publishing Corporation

Date: 21-07-2018

DOI: 10.14419/IJET.V7I3.11.15966

Abstract: Biochar has an alkaline and porous structure that could be a potential material for recycling phosphorous (P) from urine. Sawdust (SD) was pyrolyzed to produce sawdust biochar (SDB), and then impregnated with magnesium (Mg) to produce Mg-impregnated biochar (SDBM). Artificial human urine (AHU) solution was used for a batch sorption study, and various sorption parameters (i.e., sorbent/solution ratio, pH of AHU, and initial total P concentration of AHU) were optimized. The concentration of total P was measured using an inductively coupled plasma-optical emission spectroscopy (ICP-OES). The surface morphology and elemental analysis for SDB, SDBM and the struvite-loaded SDBM (SMSDB) were investigated using scanning electron spectroscopy-energy dispersive x-ray spectroscopy (SEM-EDX). The total P sorption capacity for SDBM (32755 mg/g) was higher than that of SDB (7782 mg/g) and SD (10682 mg/g). The optimum total P removal for SDBM (21.2%) was achieved at a sorbent/solution ratio of 0.06g/L at pH 9. Sorption of total P may have occurred on the heterogeneous surface of SDBM. The presence of struvite crystals indicates that phosphate was adsorbed and then precipitated on the surface of SDBM.

Universiti Teknologi MARA Negeri Sembilan - Kampus Kuala Pilah

Location: Malaysia

View Organisation

Universiti Teknologi MARA

Location: Malaysia

View Organisation

Universiti Putra Malaysia

Location: Malaysia

View Organisation