ORCID Profile
0000-0001-6412-6057
Current Organisation
Flinders University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Elsevier BV
Date: 08-2015
DOI: 10.1016/J.CLINBIOMECH.2015.05.008
Abstract: Excessive deformation of soft tissues is considered to be one of the major contributing factors to discomfort and injury for in iduals who sit for long periods of time. Soft tissue deformation in research has been measured under the assumption that tissues deform uniaxially below the ischium, with very small or negligible deformations taking place in other directions. Therefore, this study describes the deformation of the gluteus maximus muscle and surrounding fat tissues in the buttock region for seated subjects. In vivo measurements of the deformation for the gluteal soft tissues were obtained from MRI scans of six seated subjects. Each subject was scanned in weight-bearing and non-weight-bearing sitting postures using a Positional MRI scanner (Fonar 0.6 Tesla Indomitable™). Deformations were measured below the ischium and the proximal femur. Deformation of the gluteus maximus was also measured in the distal direction along the thigh for each subject. Our data suggest that soft tissues undergo three-dimensional deformation with considerable components below the ischium (mean of 21.4mm) and in the distal direction along the thigh (mean of 20.3mm). Differences in muscle deformation below the ischium were also observed between obese (mean of 27.4mm) and non-obese subjects (mean of 16.5mm). Findings of this study demonstrate that tissue deformations in sitting include complex three-dimensional motions that are not well approximated by two-dimensional models.
Publisher: Springer Science and Business Media LLC
Date: 13-07-2021
Publisher: Wiley
Date: 13-02-2018
DOI: 10.1002/JOR.23851
Abstract: Traditionally, diaphyseal stems have been utilized to augment the stability of revision total knee replacement (rTKR) implants. More recently metaphyseal augments, such as sleeves, have been introduced to further augment component fixation. The effect of augments such as stems and sleeves have on the primary stability of a rTKR implant is poorly understood, however it has important implications on the complexity, costs and survivorship of the procedure. Finite element analysis was used to investigate the primary stability and strain distribution of various size stems and sleeves used in conjunction with a cementless revision tibial tray. The model was built from computer tomography images of a single healthy tibia obtained from an 81-year-old patient to which an Anderson Orthopaedic Research Institute (AORI) IIA defect was virtually added. The influences of varying body mass index (BMI) and bone modulus were also investigated. Stemless sleeves were found to provided adequate primary implant stability (average implant micro-motion <50 μm) for the studied defect. Addition of a stem did not enhance the primary stability. Furthermore, this study found that varying BMI and bone modulus had a considerable effect on strain distribution but negligible effect on micro-motion in the sleeve area. In conclusion, the addition of diaphyseal stem to a metaphyseal sleeve had little benefit in enhancing the primary stability of tibial trays augmented when simulating reconstructions of AORI IIA tibial defects. Additional studies are required to determine the relative benefit of the diaphyseal stem when using metaphyseal sleeves defects with more extensive bone loss. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1876-1886, 2018.
Publisher: ASME International
Date: 24-05-2018
DOI: 10.1115/1.4039824
Abstract: Successful designs of total hip replacement (THR) need to be robust to surgical variation in sizing and positioning of the femoral stem. This study presents an automated method for comprehensive evaluation of the potential impact of surgical variability in sizing and positioning on the primary stability of a contemporary cementless femoral stem (Corail®, DePuy Synthes). A patient-specific finite element (FE) model of a femur was generated from computed tomography (CT) images from a female donor. An automated algorithm was developed to span the plausible surgical envelope of implant positions constrained by the inner cortical boundary. The analysis was performed on four stem sizes: oversized, ideal (nominal) sized, and undersized by up to two stem sizes. For each size, Latin hypercube s ling was used to generate models for 100 unique alignment scenarios. For each scenario, peak hip contact and muscle forces published for stair climbing were scaled to the donor's body weight and applied to the model. The risk of implant loosening was assessed by comparing the bone–implant micromotion/strains to thresholds (150 μm and 7000 με) above which fibrous tissue is expected to prevail and the periprosthetic bone to yield, respectively. The risk of long-term loosening due to adverse bone resorption was assessed using bone adaptation theory. The range of implant positions generated effectively spanned the available intracortical space. The Corail stem was found stable and robust to changes in size and position, with the majority of the bone–implant interface undergoing micromotion and interfacial strains that are well below 150 μm and 7000 με, respectively. Nevertheless, the range of implant positions generated caused an increase of up to 50% in peak micromotion and up to 25% in interfacial strains, particularly for retroverted stems placed in a medial position.
Publisher: British Editorial Society of Bone & Joint Surgery
Date: 2023
DOI: 10.1302/2633-1462.41.BJO-2022-0147.R1
Abstract: Iliopsoas impingement occurs in 4% to 30% of patients after undergoing total hip arthroplasty (THA). Despite a relatively high incidence, there are few attempts at modelling impingement between the iliopsoas and acetabular component, and no attempts at modelling this in a representative cohort of subjects. The purpose of this study was to develop a novel computational model for quantifying the impingement between the iliopsoas and acetabular component and validate its utility in a case-controlled investigation. This was a retrospective cohort study of patients who underwent THA surgery that included 23 symptomatic patients diagnosed with iliopsoas tendonitis, and 23 patients not diagnosed with iliopsoas tendonitis. All patients received postoperative CT imaging, postoperative standing radiography, and had minimum six months’ follow-up. 3D models of each patient’s prosthetic and bony anatomy were generated, landmarked, and simulated in a novel iliopsoas impingement detection model in supine and standing pelvic positions. Logistic regression models were implemented to determine if the probability of pain could be significantly predicted. Receiver operating characteristic curves were generated to determine the model’s sensitivity, specificity, and area under the curve (AUC). Highly significant differences between the symptomatic and asymptomatic cohorts were observed for iliopsoas impingement. Logistic regression models determined that the impingement values significantly predicted the probability of groin pain. The simulation had a sensitivity of 74%, specificity of 100%, and an AUC of 0.86. We developed a computational model that can quantify iliopsoas impingement and verified its accuracy in a case-controlled investigation. This tool has the potential to be used preoperatively, to guide decisions about optimal cup placement, and postoperatively, to assist in the diagnosis of iliopsoas tendonitis. Cite this article: Bone Jt Open 2023 (1):3–12.
Publisher: Wiley
Date: 11-2017
DOI: 10.1002/JOR.23744
Abstract: For cementless femoral stems, there is debate as to whether a collar enhances primary stability and load transfer compared to collarless designs. Finite Element (FE) analysis has the potential to compare stem designs within the same cohort, allowing for subtle performance differences to be identified, if present. Subject-specific FE models of intact and implanted femora were run for a erse cohort (21 males, 20 females BMI 16.4-41.2 kg/m
Publisher: Wiley
Date: 19-02-2023
DOI: 10.1002/JOR.25526
Abstract: Tibiofemoral geometry influences knee passive motion and understanding their relationship can provide insight into knee function and mechanisms of injury. However, the complexity of the geometric constraints has made characterizing the relationship challenging. The aim of this study was to determine the tibiofemoral bone geometries that explain the variation in passive motion using a partial least squares regression (PLSR) model. The PLSR model was developed for 29 healthy cadaver specimens (10 female, 19 male) with femur and tibia geometries retrieved from MRI images and six degree‐of‐freedom tibiofemoral kinematics determined during a flexion cycle with minimal medial pressure. The first 13 partial least squares (PLS) components explained 90% of the variation in the kinematics and accounted for 89% of the variation in geometry. The first three PLS components which shared geometric changes to particular surface congruencies of the tibial and femoral condyles explained the most amount of variation in the kinematics, primarily in anterior–posterior translation. Meanwhile, variations in femoral condyle width and the intercondylar space, tibia plateau size and conformity, and tibia eminences heights in PLS 2 and 4 explained the greatest amount of variation in internal–external rotation. PLS 4 exhibiting variation in overall size of the knee accounted for greatest amount of variation in geometry (50%) and had the greatest influence on the abduction–adduction motion and some on internal–external rotation but, overall, explained only a small proportion of the kinematics (10%). Elucidating the complex relationship between tibiofemoral bone geometry and passive kinematics may help personalize treatments for improved functional outcomes in patients.
Publisher: Elsevier BV
Date: 12-2017
DOI: 10.1016/J.CLINBIOMECH.2017.09.017
Abstract: The design of seating systems to improve comfort and reduce injury would benefit from improved understanding of the deformation and strain patterns in soft tissues, particularly in the gluteal region. Ten healthy men were positioned in a semi-recumbent posture while their pelvic and thigh region was scanned using a wide-bore magnetic resonance imaging (MRI) scanner. Independent measurements of deformation for muscles and fat were taken for the transition from non-weight-bearing to weight-bearing loads in three stages. A weight-bearing load was achieved through having the subject supported by a flat, rigid surface. A non-weight-bearing condition was achieved by removing the support under the left buttock, leaving all soft tissue layers undeformed. An intermediate condition partially relieved the subject's left buttock by lowering the support relative to the pelvis by 20mm, which left the buttock partially deformed. For each of these conditions, the thicknesses of muscle and fat tissues below the ischial tuberosity and the greater trochanter were measured from the MRI data. In this dataset, the greatest soft tissue deformation took place below the ischial tuberosity, with muscles (mean=17.7mm, SD=4.8mm) deforming more than fat tissues (mean=4.3mm, SD=5.6mm). Muscles deformed through both steps of the transition from weight-bearing to non-weight-bearing conditions, while subcutaneous fat deformed little after the first transition from non-weight-bearing to partial-weight-bearing. High inter-subject variability in muscle and fat tissue strains was observed. Our findings highlight the importance of considering inter-subject variability when designing seating systems.
Publisher: Wiley
Date: 07-04-2019
DOI: 10.1002/JOR.24232
Abstract: Metaphyseal augments, such as sleeves, have been introduced to augment the fixation of revision total knee replacement (rTKR) components, and can be used with or without a stem. The effect of sleeve size in combination with stems on the primary stability and load transfer of a rTKR implant in AORI type IIB defects where the defect involves both condyles are poorly understood. The aim of this study was to examine the primary stability of revision tibial tray augmented with a sleeve in an AORI type IIB defect which involves both condyles with loss of cortical and cancellous bone. Finite element models were generated from computed tomography (CT) scans of nine in iduals. All the bones used in the study had an AORI type IIB defect. The cohort included eight females (mean weight: 64 kg, height: 1.6 m). Material properties were s led from CT data and assigned to the FE model. Joint contact forces for level gait, stair descent, and squat were applied. Stemless sleeved implants under various loading conditions were shown to have adequate primary stability in all AORI type IIB defects investigated. Adding a stem only marginally improved the primary stability of the implant but reduced the strain in the metaphysis compared to stemless implants. Once good initial mechanical stability was established with a sleeve, there was no benefit, in terms of primary stability or bone strains, from increasing sleeve size. This study suggests that metaphyseal sleeves, without a stem, can provide the required primary stability required by a rTKR tibial implant, to reconstruct an AORI type IIB defect. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res.
Publisher: Springer Science and Business Media LLC
Date: 08-02-2016
DOI: 10.1007/S10439-016-1560-3
Abstract: Current practices for designing new cushions for seats depend on superficial measurements, such as pressure mapping, which do not provide sufficient information about the condition of sub-dermal tissues. Finite element (FE) modelling offers a unique alternative to integrate assessment of sub-dermal tissue condition into seat/cushion design and development processes. However, the development and validation of such FE models for seated humans requires accurate representation of the anatomy and material properties, which remain challenges that are yet to be addressed. This paper presents the development and validation of a detailed 3D FE model with high anatomical fidelity of the buttock and thigh, for a specific seated subject. The developed model consisted of 28 muscles, the pelvis, sacrum, femur, and one layer of inter-muscular fat, subcutaneous fat and skin. Validation against in vivo measurements from MRI data confirmed that the FE model can simulate the deformation of soft tissues under sitting loads with an accuracy of (mean ± SD) 4.7 ± 4.4 mm. Simulation results showed that the maximum strains (compressive, shear and von-Mises) on muscles (41, 110, 79%) were higher than fat tissues (21, 62, 41%). The muscles that experienced the highest mechanical loads were the gluteus maximus, adductor magnus and muscles in the posterior aspect of the thighs (biceps femoris, semitendinosus and semimembranosus muscles). The developed FE model contributes to the progression towards bio-fidelity in modelling the human body in seated postures by providing insight into the distribution of stresses/strains in in idual muscles and inter-muscular fat in the buttock and thigh of seated in iduals. Industrial applications for the developed FE model include improving the design of office and household furniture, automotive and airplane seats and wheelchairs as well as customisation and assessment of sporting and medical equipment to meet in idual requirements.
Publisher: Elsevier BV
Date: 11-2018
DOI: 10.1016/J.CLINBIOMECH.2018.09.002
Abstract: Restoring the original femoral offset is desirable for total hip replacements as it preserves the original muscle lever arm and soft tissue tensions. This can be achieved through lateralised stems, however, the effect of variation in the hip centre offset on the primary stability remains unclear. Finite element analysis was used to compare the primary stability of lateralised and standard designs for a cementless femoral stem (Corail®) across a representative cohort of male and female femora (N = 31 femora age from 50 to 80 years old). Each femur model was implanted with three designs of the Corail® stem, each designed to achieve a different degree of lateralisation. An automated algorithm was used to select the size and position that achieve maximum metaphyseal fit for each of the designs. Joint contact and muscle forces simulating the peak forces during level gait and stair climbing were scaled to the body mass of each subject. The study found that differences in restoring the native femoral offset introduce marginal differences in micromotion (differences in peak micromotion 3000 με) was achieved for some subjects when lateralized stems were used. Findings of this study suggest that, with the appropriate size and alignment, the standard offset design is likely to be sufficient for primary stability, in most cases. Nonetheless, appropriate use of lateralised stems has the potential reduce the risk of peri-prosthetic bone damage. This highlights the importance of appropriate implant selection during the surgical planning stage.
Publisher: Wiley
Date: 12-09-2017
DOI: 10.1002/JOR.23709
Abstract: The primary stability achieved during total hip arthroplasty determines the long-term success of cementless acetabular cups. Pre-clinical finite element testing of cups typically use a model of a single patient and assume the results can be extrapolated to the general population. This study explored the variability in predicted primary stability of a Pinnacle
No related grants have been discovered for Rami Al-Dirini.