ORCID Profile
0000-0003-3387-0531
Current Organisations
Monash University
,
Leiden University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: AIP Publishing
Date: 02-05-2023
DOI: 10.1063/5.0147376
Abstract: Epitaxial graphene (EG) on cubic silicon carbide (3C-SiC) on silicon holds the promise of tunable nanoelectronic and nanophotonic devices, some uniquely unlocked by the graphene/cubic silicon carbide combination, directly integrated with the current well-established silicon technologies. Yet, the development of graphene field-effect devices based on the 3C-SiC/Si substrate system has been historically hindered by poor graphene quality and coverage, as well as substantial leakage issues of the heteroepitaxial system. We address these issues by growing EG on 3C-SiC on highly resistive silicon substrates using an alloy-mediated approach. In this work, we demonstrate a field-effect transistor based on EG/3C-SiC/Si with gate leakage current 6 orders of magnitude lower than the drain current at room temperature, which is a vast improvement on the current literature, opening the possibility for dynamically tunable nanoelectronic and nanophotonic devices on silicon at the wafer level.
Publisher: AIP Publishing
Date: 07-08-2017
DOI: 10.1063/1.4998464
Abstract: We report a detailed study on low-frequency 1/f-noise in large-area molecular-beam epitaxy grown thin (∼10 nm) films of topological insulators as a function of temperature, gate voltage, and magnetic field. When the Fermi energy is within the bulk valence band, the temperature dependence reveals a clear signature of generation-recombination noise in the defect states in the bulk band gap. However, when the Fermi energy is tuned to the bulk band gap, the gate voltage dependence of noise shows that the resistance fluctuations in surface transport are caused by correlated mobility-number density fluctuations due to the activated defect states present in the bulk of the topological insulator crystal with a density of Dit=3.2×1017 cm−2 eV−1. In the presence of the magnetic field, noise in these materials follows a parabolic dependence, which is qualitatively similar to mobility and charge-density fluctuation noise in non-degenerately doped trivial semiconductors. Our studies reveal that even in thin films of (Bi,Sb)2Te3 with thickness as low as 10 nm, the internal bulk defects are the dominant source of noise.
Publisher: American Physical Society (APS)
Date: 06-07-2020
Publisher: Wiley
Date: 04-12-2021
Abstract: Atomically thin transition metal dichalcogenide crystals (TMDCs) have extraordinary optical properties that make them attractive for future optoelectronic applications. Integration of TMDCs into practical all‐dielectric heterostructures hinges on the ability to passivate and protect them against necessary fabrication steps on large scales. Despite its limited scalability, encapsulation of TMDCs in hexagonal boron nitride (hBN) currently has no viable alternative for achieving high performance of the final device. Here, it is shown that the novel, ultrathin Ga 2 O 3 glass is an ideal centimeter‐scale coating material that enhances optical performance of the monolayers and protects them against further material deposition. In particular, Ga 2 O 3 capping of monolayer WS 2 outperforms commercial‐grade hBN in both scalability and optical performance at room temperature. These properties make Ga 2 O 3 highly suitable for large‐scale passivation and protection of monolayer TMDCs in functional heterostructures.
Publisher: Springer Science and Business Media LLC
Date: 24-01-2020
Publisher: Springer Science and Business Media LLC
Date: 03-04-2017
Abstract: The zigzag edges of single- or few-layer graphene are perfect one-dimensional conductors owing to a set of gapless states that are topologically protected against backscattering. Direct experimental evidence of these states has been limited so far to their local thermodynamic and magnetic properties, determined by the competing effects of edge topology and electron-electron interaction. However, experimental signatures of edge-bound electrical conduction have remained elusive, primarily due to the lack of graphitic nanostructures with low structural and/or chemical edge disorder. Here, we report the experimental detection of edge-mode electrical transport in suspended atomic-scale constrictions of single and multilayer graphene created during nanomechanical exfoliation of highly oriented pyrolytic graphite. The edge-mode transport leads to the observed quantization of conductance close to multiples of G
Publisher: Wiley
Date: 29-06-2021
Abstract: Inducing long‐range magnetic order in 3D topological insulators can gap the Dirac‐like metallic surface states, leading to exotic new phases such as the quantum anomalous Hall effect or the axion insulator state. These magnetic topological phases can host robust, dissipationless charge and spin currents or unique magnetoelectric behavior, which can be exploited in low‐energy electronics and spintronics applications. Although several different strategies have been successfully implemented to realize these states, to date these phenomena have been confined to temperatures below a few Kelvin. This review focuses on one strategy: inducing magnetic order in topological insulators by proximity of magnetic materials, which has the capability for room temperature operation, unlocking the potential of magnetic topological phases for applications. The unique advantages of this strategy, the important physical mechanisms facilitating magnetic proximity effect, and the recent progress to achieve, understand, and harness proximity‐coupled magnetic order in topological insulators are discussed. Some emerging new phenomena and applications enabled by proximity coupling of magnetism and topological materials, such as skyrmions and the topological Hall effect, are also highlighted, and the authors conclude with an outlook on remaining challenges and opportunities in the field.
Publisher: AIP Publishing
Date: 22-02-2016
DOI: 10.1063/1.4942412
Abstract: We report detailed temperature and gate-voltage dependence of 1/f resistance noise in magnetically doped topological insulators (TI) Crx(Bi,Sb)2−xTe3. The noise is remarkably sensitive to the gate voltage, increasing rapidly as the chemical potential is moved towards the charge neutrality point. Unlike in identically prepared (Bi,Sb)2Te3 films, where mobility-fluctuations in the surface states is the dominant mechanism, the noise in the magnetic Crx(Bi,Sb)2−xTe3 originates from transport in the localized band tail of the bulk valence band. A strong increase in noise with decreasing temperature supports this scenario. At higher temperature (≥10 K), we observed large noise peaks at gate voltage-dependent characteristic temperature scales. In line with similar observations in other non-magnetic TI systems, we attribute these peaks to generation-recombination in the Cr-impurity band.
Publisher: arXiv
Date: 2022
Publisher: American Physical Society (APS)
Date: 28-06-2018
Publisher: American Chemical Society (ACS)
Date: 21-11-2022
DOI: 10.1021/ACS.NANOLETT.2C03492
Abstract: We demonstrate a large-area passivation layer for graphene by mechanical transfer of ultrathin amorphous Ga
Publisher: American Chemical Society (ACS)
Date: 19-11-2015
Abstract: Slow intrinsic fluctuations of resistance, also known as the flicker noise or 1/f-noise, in the surface transport of strong topological insulators (TIs) is a poorly understood phenomenon. Here, we have systematically explored the 1/f-noise in field-effect transistors (FET) of mechanically exfoliated Bi1.6Sb0.4Te2Se TI films when transport occurs predominantly via the surface states. We find that the slow kinetics of the charge disorder within the bulk of the TI induces mobility fluctuations at the surface, providing a new source of intrinsic 1/f-noise that is unique to bulk TI systems. At small channel thickness, the noise magnitude can be extremely small, corresponding to the phenomenological Hooge parameter γH as low as ≈10(-4), but it increases rapidly when channel thickness exceeds ∼1 μm. From the temperature (T)-dependence of noise, which displayed sharp peaks at characteristic values of T, we identified generation-recombination processes from interband transitions within the TI bulk as the dominant source of the mobility fluctuations in surface transport. Our experiment not only establishes an intrinsic microscopic origin of noise in TI surface channels, but also reveals a unique spectroscopic information on the impurity bands that can be useful in bulk TI systems in general.
Publisher: AIP Publishing
Date: 27-09-2021
DOI: 10.1063/5.0058267
Abstract: We investigate the effects of direct deposition of different dielectric materials (AlOx, SiOx, SiNx) onto atomically thin TMDC WS2 on its optical response using atomic layer deposition (ALD), electron beam evaporation (EBE), plasma-enhanced chemical vapor deposition (PECVD), and magnetron sputtering. The photoluminescence measurements reveal quenching of the excitonic emission after all deposition processes, which is linked to the increased level of charge doping and associated rise of the trion emission and/or the localized (bound) exciton emission. Furthermore, Raman spectroscopy allows us to clearly correlate the observed changes in excitonic emission with the increased levels of lattice disorder and defects. In particular, we show that the different doping levels in a monolayer WS2 capped by a dielectric material are strongly related to the defects in the WS2 crystal introduced by all capping methods, except for ALD. The strong charge doping in the ALD-capped s le seems to be caused by other factors, such as deviations in the dielectric layer stoichiometry or chemical reactions on the monolayer surface, which makes ALD distinct from all other techniques. Overall, the EBE process results in the lowest level of doping and defect densities and in the largest spectral weight of the exciton emission in the PL. Sputtering is revealed as the most aggressive dielectric capping method for WS2, fully quenching its optical response. Our results demonstrate and quantify the effects of direct deposition of dielectric materials onto monolayer WS2, which can provide valuable guidance for the efforts to integrate monolayer TMDCs into functional optoelectronic devices.
Publisher: American Physical Society (APS)
Date: 13-06-2019
Location: Australia
No related grants have been discovered for Semonti Bhattacharyya.