ORCID Profile
0000-0003-3610-420X
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
In Research Link Australia (RLA), "Research Topics" refer to ANZSRC FOR and SEO codes. These topics are either sourced from ANZSRC FOR and SEO codes listed in researchers' related grants or generated by a large language model (LLM) based on their publications.
Forensic Chemistry | Other Chemical Sciences | Detection And Prevention Of Crime; Security Services | Criminology | Analytical Chemistry | Analytical Spectrometry | Nanotechnology | Organic Chemistry | Genetics Not Elsewhere Classified | Separation Science | Organic Chemical Synthesis | Chemical Sciences Not Elsewhere Classified | Electroanalytical Chemistry | Biological (Physical) Anthropology | Crime Policy | Archaeological Science | Criminology | Justice Systems And Administration | Police Administration, Procedures And Practice | Evidence And Procedure | Biophysics | Industrial Chemistry | Biological Sciences Not Elsewhere Classified | Industrial Biotechnology | Analytical Chemistry Not Elsewhere Classified | Criminology not elsewhere classified | Industrial Biotechnology Diagnostics (incl. Biosensors) | Condensed Matter Physics—Structural Properties |
Law Enforcement | Justice and the law not elsewhere classified | Law enforcement | Chemical sciences | Technological and organisational innovation | Other | Criminal Justice | National Security | Biological sciences | Physical sciences | Scientific instrumentation | Expanding Knowledge in the Chemical Sciences | Diagnostics | Health Protection and/or Disaster Response
Publisher: Elsevier BV
Date: 12-2021
Publisher: Informa UK Limited
Date: 17-01-2018
Publisher: Wiley
Date: 09-02-2011
DOI: 10.1111/J.1556-4029.2010.01654.X
Abstract: Circumstances of criminal activities involving radioactive materials may mean fiber evidence recovered from a crime scene could have been exposed to materials emitting ionizing radiation. The consequences of radiation exposed fibers on the result of the forensic analysis and interpretation is explored. The effect of exposure to 1-1000 kGy radiation doses in natural and synthetic fibers was noticeable using comparative forensic examination methods, such as optical microscopy, microspectrophotometry, and thin-layer chromatography. Fourier transform infrared spectroscopy analysis showed no signs of radiation-induced chemical changes in any of the fiber structures. The outcome of the comparative methods highlights the risk of "false negatives" associated in comparing colors of recovered fibers that may have been exposed to unknown radiation doses. Consideration of such results supports the requirement to know the context, including the environmental conditions, as much as possible before undertaking a forensic fiber examination.
Publisher: Wiley
Date: 09-2006
DOI: 10.1111/J.1556-4029.2007.00539.X
Abstract: In the present age of heightened emphasis on counter terrorism, law enforcement and forensic science are constantly evolving and adapting to the motivations and capabilities of terrorist groups and in iduals. The use of biological agents on a population, such as anthrax spores, presents unique challenges to the forensic investigator, and the processing of contaminated evidence. In this research, a number of porous and non-porous items were contaminated with viable [corrected] spores and marked with latent fingermarks. The test s les were then subjected to a standard formulation of formaldehyde gas. Latent fingermarks were then recovered post decontamination using a range of methods. Standard fumigation, while effective at destroying viable spores, contributed to the degradation of amino acids leading to loss of ridge detail. A new protocol for formaldehyde gas decontamination was developed which allows for the destruction of viable spores and the successful recovery of latent marks, all within a rapid response time of less than 1 h.
Publisher: Wiley
Date: 15-05-2019
DOI: 10.1002/WFS2.1338
Abstract: Fingermark detection is a very active field of research in forensic science, with many different strategies currently investigated to always improve detection rate. However, each new technique has first to be optimized, assessed and validated with many fingermarks from multiple donors across a wide variety of substrates before being included into laboratories operating procedures. This process often requires the collaboration of research groups and operational laboratories from different countries, and it takes several years for a new method to be applied routinely in casework. One particular challenge that makes the process from R& D to operations complicated is the significant intrinsic within‐ and between‐source variability of fingermarks. Many studies partially addressing fingermark variability have been reported but a comprehensive approach to the problem is yet to be found. This review describes the factors of fingermark variability and provides an extensive overview of various strategies implemented to control it. The use of artificial fingermarks or simulants, containing some of the most abundant compounds found in fingermark residue has been investigated by some research teams. However, most of these formulations are too simplistic and can only be used to assess a restrictive number of detection techniques, such as amino acid reagents. Practical applications of artificial fingermarks such as test strips and proficiency testing are reviewed. The advantage and challenges of using artificial fingermarks in the first stages of fingermark detection research are presented. This article is categorized under: Forensic Chemistry and Trace Evidence Fingermarks and Other Marks
Publisher: SAGE Publications
Date: 13-09-2019
Abstract: Internet access has provided new ways to trade goods. Unlike conventional legal sale sites, cryptomarkets facilitate exchanges in a context where the anonymity of participants is warranted. The aim of this article was to obtain a better understanding of the trafficking of prescription drugs and medicine on the AlphaBay cryptomarket. The results showed that alprazolam, oxycodone, and Adderall were the most offered prescription drugs while alprazolam, diazepam, and oxycodone were the most sold substances. The sale was dominated by North America, Australia, and Western European countries. The revenue of prescription drugs was estimated to be more than US$65 million since the creation of AlphaBay, a small market in comparison with the worldwide legal pharmaceutical market’s estimate of US$1.3 trillion in 2020. Digital traces offer a complementary way to understand the trafficking of prescription drugs and medicine and to identify the most prolific vendors and their implication in this trafficking.
Publisher: Elsevier BV
Date: 12-2015
DOI: 10.1016/J.FORSCIINT.2015.06.034
Abstract: Physical developer (PD) is a fingermark development technique that involves the selective reduction of silver onto fingermark residue. PD can develop marks on porous substrates even if they have been wet, leading to the logical, long held belief that the reagent targets the water insoluble constituents in the fingermark residue. The present research has tested this hypothesis as part of a broader study that aims to identify the targets of physical developer. Spot tests of some fatty acids, cholesterol and squalene, treated with PD, showed that only cholesterol produced significant silver deposition. PD is known to be particularly effective on aged marks, however cholesterol degrades over time. These observations indicate that PD reactivity with fingermarks cannot solely be due to the presence of cholesterol. Fingermarks were deposited on paper and washed with various organic solvents before being treated with PD. PD effectiveness was intermittent on both solvent washed and unwashed sides of both natural and groomed marks however, it was seen to effectively develop groomed s les that had been exposed to common lipid extraction solvents, shown to have removed the lipids by visualisation using the lipid stain Nile red. PD effectiveness was most affected by exposure of s les to solvents that could dissolve water soluble components, showing that the removal of these constituents (by either water, or other solvents) decreases the amount of silver deposited on the fingermark residue by the working solution. Close observation of PD developed s les showed variation in silver deposition uniformity when comparing a developed ridge to a pore site located on that ridge. Some s les showed an absence of silver, and other showed an increase of silver at pore locations. This indicates that the material excreted by the pores on the finger has an effect on silver deposition, suggesting that PD may be specifically targeting eccrine constituents that are present along the ridges but are more concentrated at the pore locations. These findings indicate that PD is not targeting the lipids in the fingermark residue per se, and may instead be targeting eccrine constituents or a more complex mixture of both eccrine and lipid constituents. Further investigation is underway within our group to investigate the components targeted by PD to gain a better understanding of what is a notoriously sensitive and hard to employ technique in the hope that it can be improved or simplified, or alternatives identified.
Publisher: Elsevier BV
Date: 2020
Publisher: Elsevier BV
Date: 03-2014
DOI: 10.1016/J.FORSCIINT.2013.12.028
Abstract: It is generally accepted that the amino acid reagent consisting of 1,2-indanedione and a catalytic amount of zinc chloride, referred to as IND-Zn, is the single best method for the detection of latent fingermarks on paper substrates and that ninhydrin is of limited value when used in sequence after this reagent. However, recent research has suggested that the sequence 1,8-diazafluoren-9-one (DFO) followed by ninhydrin may actually produce a greater number of fingermarks than IND-Zn on its own or IND-Zn followed by ninhydrin. This study focussed on the evaluation of two fingermark detection sequences for porous surfaces: (1) IND-Zn followed by ninhydrin, physical developer (PD) and the lipid stain nile red and (2) DFO followed by ninhydrin, PD and nile red. The evaluation was undertaken using a range of latent fingermark donors and on a number of paper substrates that are commonly encountered in Australia. In addition, a pseudo-operational trial was completed on 5-year-old university examination booklets. Parallel studies were undertaken at two locations: Sydney (temperate, coastal climate) and Canberra (relatively dry, continental climate). The results of the donor study indicated that there was a negligible difference in performance between the two sequences across all paper types and all time periods evaluated. When considering in idual reagents, IND-Zn generally developed better quality fingermarks compared to DFO however, ninhydrin had a greater enhancement effect on DFO developed marks than after IND-Zn. In the pseudo-operational trials, the IND-Zn sequence outperformed the DFO sequence. Nile red did not develop any additional marks at the end of each sequence and, as a result, the use of this technique at the end of a full sequence is of questionable value. The overall outcome was that the sequence IND-Zn followed by ninhydrin and PD is recommended for the processing of common paper substrates under the conditions typically experienced at the two locations studied.
Publisher: Elsevier BV
Date: 04-2017
DOI: 10.1016/J.FORSCIINT.2017.02.018
Abstract: Hand sanitizers have seen a rapid increase in popularity amongst the general population and this increased use has led to the belief that hand sanitizers may have an effect on subsequent fingermark detection. Based on this hypothesis, three alcoholic and two non-alcoholic hand sanitizers were evaluated to determine the effect they had on the detection of fingermarks deposited after their use. The following fingermark detection methods were applied: 1,2-indanedione-zinc, ninhydrin, physical developer (porous substrate) and cyanoacrylate, rhodamine 6G, magnetic powder (non-porous substrate). Comparison between hand sanitized fingermarks and non-hand sanitized fingermarks showed that the alcohol-based hand sanitizers did not result in any visible differences in fingermark quality. The non-alcoholic hand sanitizers, however, improved the quality of fingermarks developed with 1,2-indanedione-zinc and ninhydrin, and marginally improved those developed with magnetic powder. Different parameters, including time since hand sanitizer application prior to fingermark deposition and age of deposited mark, were tested to determine the longevity of increased development quality. The non-alcoholic hand sanitized marks showed no decrease in quality when aged for up to two weeks. The time since sanitizer application was determined to be an important factor that affected the quality of non-alcoholic hand sanitized fingermarks. It was hypothesized that the active ingredient in non-alcoholic hand sanitizers, benzalkonium chloride, is responsible for the increase in fingermark development quality observed with amino acid reagents, while the increased moisture content present on the ridges resulted in better powdered fingermarks.
Publisher: Elsevier BV
Date: 12-2009
DOI: 10.1016/J.FSIGEN.2009.04.002
Abstract: The successful recovery of trace or contact DNA is highly variable. It is seemingly dependent on a wide range of factors, from the characteristics of the donor, substrate and environment, to the delay between contact and recovery. There is limited research on the extent of the effect these factors have on trace DNA analysis. This study investigated the persistence of trace DNA on surfaces relevant to the investigation of burglary and robbery offences. The study aimed to limit the number of variables involved to solely determine the effect of time on DNA recovery. Given that it is difficult to control the quantity of DNA deposited during a hand contact, human buffy coat and DNA control solution were chosen as an alternative to give a more accurate measure of quantity. Set volumes of these solutions were deposited onto outdoor surfaces (window frames and vinyl material to mimic burglary and 'bag snatch' offences) and sterile glass slides stored in a closed environment in the laboratory, for use as a control. Trace DNA casework data was also scrutinised to assess the effect of time on DNA recovery from real s les. The amount of DNA recovered from buffy coat on the outdoor surfaces declined by approximately half over two weeks, to a negligible amount after six weeks. Profiles could not be obtained after two weeks. The s les stored in the laboratory were more robust, and full profiles were obtained after six weeks, the longest time period tested in these experiments. It is possible that profiles may be obtained from older s les when kept in similarly favourable conditions. The experimental results demonstrate that the ability to recover DNA from human cells on outdoor surfaces decreases significantly over two weeks. Conversely, no clear trends were identified in the casework data, indicating that many other factors are involved affecting the recovery of trace DNA. Nevertheless, to ensure that valuable trace evidence is not lost, it is recommended that crime scenes are processed expeditiously.
Publisher: Elsevier BV
Date: 2017
DOI: 10.1016/J.FORSCIINT.2016.09.003
Abstract: The traces produced when a firearm is discharged can provide important information in cases when questions regarding a possible association of the firearm with a person of interest (POI), time since discharge or shooting distance are raised. With advances in technology, the forensic challenges presented by these traces, known as gunshot residues (GSR), are moving from the analytical domain to the interpretation of the analytical results. Different interpretation frameworks are currently competing. Formal classification of particles, using standards such as that produced by ASTM, focusses only on evaluation of evidence at the sub-source level. Another approach, based on the application of Bayesian reasoning - namely the case-by-case approach - has been proposed that allows evaluation of evidence in regards to activity-related questions. This alternative approach allows an evaluation of the evidence that is more closely aligned to judicial and investigative aims. This paper critically presents the state of the art in regards to GSR interpretation in a holistic manner.
Publisher: Elsevier BV
Date: 05-2018
DOI: 10.1016/J.FORSCIINT.2018.02.015
Abstract: Fingermarks can be exploited for both their ridge detail and touch DNA. One-step luminescent cyanoacrylate (CA) fuming techniques used for fingermark enhancement, such as PolyCyano UV (Foster+Freeman Ltd) and Lumicyano™ (Crime Science Technology), claim to be compatible with DNA analysis as they reduce the need for post-staining to increase contrast of the developed fingermark. The aim of this study was to determine the impact that these one-step luminescent cyanoacrylates have on DNA analysis and how they compare to conventional CA techniques. Four donors each deposited five sets of natural fingermarks, to which a known amount of washed saliva cells was dispensed onto half of each set of fingermarks. Each set was treated with either a conventional CA technique or a one-step luminescent CA technique prior to collection and processing of DNA, with one set left as a non-fumed control. It was found that DNA was still recoverable and detectable following each of the treatments. Lumicyano™ had a similar impact on DNA profiles as conventional CA fuming and with post-stain, however, the degradation effect of PolyCyano UV on DNA was greater than the conventional treatments. For quantities of DNA such as that from touch DNA, the use of PolyCyano UV to enhance fingermarks may impact subsequent DNA analysis by causing allele drop out at larger fragment sizes.
Publisher: Elsevier BV
Date: 04-2017
DOI: 10.1016/J.FORSCIINT.2017.02.013
Abstract: This article describes the development of a horizontal stabbing machine with an interchangeable knife holder to simulate stab events. The machine consists of a motorised arm with a pneumatic system designed to deliver 60 unique stabbing positions. The mechanics were robust and the positioning system highly reproducible with standard deviations of less than 1.0mm in the x-axis and 2.3mm in the y-axis for a given stab position. The force of the instrument may be varied by the operator to a maximum of approximately 221N. The suitability of the instrument for simulating stab events was evaluated by measuring the severance length and textile damage from stab delivered from four different knives and nine penetrating angles.
Publisher: Elsevier BV
Date: 09-2020
Publisher: Elsevier BV
Date: 06-2009
DOI: 10.1016/J.SCIJUS.2009.04.005
Abstract: An evaluation was undertaken to determine if isotope ratio mass spectrometry (IRMS) could assist in the investigation of complex forensic cases by providing a level of discrimination not achievable utilising traditional forensic techniques. The focus of the research was on ammonium nitrate (AN), a common oxidiser used in improvised explosive mixtures. The potential value of IRMS to attribute Australian AN s les to the manufacturing source was demonstrated through the development of a preliminary AN classification scheme based on nitrogen isotopes. Although the discrimination utilising nitrogen isotopes alone was limited and only relevant to s les from the three Australian manufacturers during the evaluated time period, the classification scheme has potential as an investigative aid. Combining oxygen and hydrogen stable isotope values permitted the differentiation of AN prills from three different Australian manufacturers. S les from five different overseas sources could be differentiated utilising a combination of the nitrogen, oxygen and hydrogen isotope values. Limited differentiation between Australian and overseas prills was achieved for the s les analysed. The comparison of nitrogen isotope values from intact AN prill s les with those from post-blast AN prill residues highlighted that the nitrogen isotopic composition of the prills was not maintained post-blast hence, limiting the technique to analysis of un-reacted explosive material.
Publisher: Elsevier BV
Date: 02-2021
Publisher: Elsevier BV
Date: 07-2018
DOI: 10.1016/J.FORSCIINT.2018.05.002
Abstract: Technology provides new ways to access customers and suppliers while enhancing the security of off-line criminal activity. Since the first cryptomarket, Silk Road, in 2011, cryptomarkets have transformed the traditional drug sale by facilitating the creation of a global network of vendors and buyers. Due to the fragmented nature of traces that result from illegal activities, combining the results of concurrent processes based on traces of different nature should provide supplementary benefit to understand the drug market. This article compares the data of the Australian virtual market (in particular data extracted from cryptomarkets) to the data related to traditional market descriptors, namely national seizures and arrests, prevalence data, shipping countries of seized post shipments as well as outcomes of specific surveys targeting users' behaviour online. Results revealed the domestic nature of the online illicit drug trade in Australia which is dominated by hetamine-type substances (ATS), in particular methyl hetamine and cannabis. These illicit drugs were also the most seized drugs on the physical market. This article shows that the combination of different information offers a broader perspective of the illicit drug market in Australia and thus provides stronger arguments for policy makers. It also highlights the links between the virtual and physical markets.
Publisher: Elsevier BV
Date: 06-2016
DOI: 10.1016/J.FORSCIINT.2016.03.054
Abstract: Forensic intelligence has recently gathered increasing attention as a potential expansion of forensic science that may contribute in a wider policing and security context. Whilst the new avenue is certainly promising, relatively few attempts to incorporate models, methods and techniques into practical projects are reported. This work reports a practical application of a generalised and transversal framework for developing forensic intelligence processes referred to here as the Transversal model adapted from previous work. Visual features present in the images of four datasets of false identity documents were systematically profiled and compared using image processing for the detection of a series of modus operandi (M.O.) actions. The nature of these series and their relation to the notion of common source was evaluated with respect to alternative known information and inferences drawn regarding respective crime systems. 439 documents seized by police and border guard authorities across 10 jurisdictions in Switzerland with known and unknown source level links formed the datasets for this study. Training sets were developed based on both known source level data, and visually supported relationships. Performance was evaluated through the use of intra-variability and inter-variability scores drawn from over 48,000 comparisons. The optimised method exhibited significant sensitivity combined with strong specificity and demonstrates its ability to support forensic intelligence efforts.
Publisher: Wiley
Date: 21-04-2009
DOI: 10.1111/J.1556-4029.2009.01016.X
Abstract: Continual reports of illicit trafficking incidents involving radioactive materials have prompted authorities to consider the likelihood of forensic evidence being exposed to radiation. In this study, we investigated the ability to recover latent fingermark evidence from a variety of substrates that were exposed to ionizing radiation. Fingermarks deposited on common surfaces, including aluminum, glass, office paper, and plastic, were exposed to doses ranging from 1 to 1000 kGy, in an effort to simulate realistic situations where evidence is exposed to significant doses of radiation from sources used in a criminal act. The fingermarks were processed using routine fingermark detection techniques. With the exception of glass and aluminum substrates, radiolysis had a considerable effect on the quality of the developed fingermarks. The damage to ridge characteristics can, in part, be attributed to chemical interactions between the substrate and the components of the fingermark secretions that react with the detection reagents.
Publisher: Informa UK Limited
Date: 09-2010
Publisher: Elsevier BV
Date: 02-2001
DOI: 10.1016/S0379-0738(00)00358-3
Abstract: Ninhydrin developed fingerprints can be enhanced by treatment with a zinc or cadmium salt. The resulting fingerprint luminescence has been attributed to the induced coplanarity of the bicyclic indanedione rings of Ruhemann's purple due to complexation with the metal ions. This paper explores whether this effect also occurs in the 1,8-diaza-9-fluorenone (DFO)-amino acid adduct (1), formed from the reaction of DFO with amino acids. Molecular modeling studies of (1) indicate a relatively small out-of-plane angle of 24 degrees. 1H NMR studies indicate (1) is asymmetric about the C2 axis in contrast to what has been previously reported. Little, if any, enhancement of luminescence was observed with Zn, Cd, Ru or Eu treated DFO developed latent fingerprints. This lack of enhancement was also borne out by solution luminescence studies. Given this lack of enhancement of luminescence, solutions of (1) and the four metal ions above were analyzed by electrospray mass spectrometry (ESMS). This indicated the formation of predominantly 1:1 complexes of (1) with both Zn and Cd, and the 2:1 complex with ruthenium. No evidence of a Eu complex was found by ESMS.
Publisher: Elsevier BV
Date: 11-2018
DOI: 10.1016/J.FORSCIINT.2018.08.036
Abstract: Gunshot residues (GSR) are a potential form of forensic traces in firearm-related events. In most forensic laboratories, GSR analyses focus on the detection and characterisation of the inorganic components (IGSR), which are mainly particles containing mixtures of lead, barium and antimony originating from the primer. The increasing prevalence of heavy metal-free ammunition challenges the current protocols used for IGSR analysis. To provide complementary information to IGSR particles, the current study concentrated on the organic components (OGSR) arising from the combustion of the propellant. The study focused on four compounds well-known as being part of OGSR: ethylcentralite (EC), methylcentralite (MC), diphenylamine (DPA), N-nitrosodiphenylamine (N-nDPA). This study assessed the retention of these OGSR traces on a shooter's hands. The overall project aim was to provide appropriate information regarding OGSR persistence, which can be suitable to be integrated into the interpretation framework of OGSR as recommended by the recent ENFSI Guideline for Evaluative Reporting in Forensic Science. The persistence was studied through several intervals ranging from immediately after discharge to four hours and two ammunition calibres were chosen: .40 S&W calibre, used by the NSW Police Force and .357 Magnum, which is frequently encountered in Australian casework. This study successfully detected the compounds of interest up to four hours after discharge. The trends displayed a large decrease in the amount detected during the first hour. A large variability was also observed due to numerous factors involved in the production, deposition and collection of OGSR.
Publisher: Consortium Erudit
Date: 17-12-2020
DOI: 10.7202/1074188AR
Abstract: L’article propose un modèle continu, non linéaire, itératif et collaboratif de l’enquête. Celui-ci décrit le processus d’enquête appliqué au traitement des problèmes criminels et sécuritaires, faisant appel à des notions clés telles que l’entropie, le raisonnement hypothético-déductif, la méthode scientifique et la pensée itérative. Le modèle se concentre sur la démarche inférentielle et intellectuelle de l’enquête plutôt que sur les aspects procéduraux, qui varient selon les pays et les juridictions ou selon les types de crime. Inspiré de théories préexistantes de l’enquête, ce modèle offre un cadre cohérent et intégratif aux différentes méthodes d’enquête qui concourent au traitement de l’information et à la compréhension des évènements et des phénomènes. Le modèle permet aux enquêteurs, au sens large, de guider leur raisonnement et leur prise de décisions, ainsi que de situer leurs contributions tout au long du processus d’enquête. Il facilite ainsi la collaboration entre tous les acteurs, à commencer par les inspecteurs, les analystes criminels, les investigateurs numériques et les criminalistes, pour atteindre leurs objectifs communs au service de la justice, de la sécurité et de la société. À l’appui d’exemples issus de notre pratique, nous traçons ici le cheminement intellectuel qui amène à poser ce modèle progressif et collaboratif. Cette vision, qui place les intersections en son centre, ébranle les barrières classiques érigées dans les théories et la pratique. Nous décrivons les enjeux, les avantages et les limites de ce modèle.
Publisher: Elsevier BV
Date: 07-2016
DOI: 10.1016/J.FORSCIINT.2016.04.014
Abstract: Fingermark enhancement reagents capable of molecular recognition offer a highly selective and sensitive method of detection. Antibodies and aptamers provide a high degree of adaptability for visualisation, allowing for the selection of the most appropriate visualisation wavelength for a particular substrate without the need for specialist equipment or image processing. However, the major hurdle to overcome is the balance between sensitivity and selectivity. Single-target molecular recognition is highly specific, purported to have better detection limits than chemical reactions or stains, and can provide information about the donor or activity, but often results in incomplete ridge pattern development. Consequently, the development and evaluation of multi-target biomolecular reagents for fingermark enhancement was investigated, with the focus on endogenous eccrine secretions. To assess the suitability of the immunogenic reagents for potential operational use, a variety of parameters (i.e., processing time, fixing and working solution conditions) were optimised on a wide range of non-porous and semi-porous substrates. The relative performance of immunogenic reagents was compared to that of routine techniques applied to latent marks and marks in blood, semen and saliva. The incorporation of these novel reagents into routine technique sequences was also investigated. The experimental results indicated that the multi-target immunogenic reagents were not a suitable alternative to routine detection methods or sequences, but may have promise as a "last resort" method for difficult substrates or cases.
Publisher: Elsevier BV
Date: 2005
DOI: 10.1016/J.FORSCIINT.2004.04.081
Abstract: The significance of the presence of petrol in motor vehicle fires has often been challenged due to the possibility of a natural occurrence of petrol residues inside the vehicle. Transfer and persistence studies were undertaken to investigate the potential transfer and persistence of petrol onto vehicle carpets through the 'normal' usage of motor vehicles. The results of the transfer study indicate that petrol may be transferred from the external environment in sufficient quantities via the shoes of drivers or passengers to be detected after a 24 h period, but not after 1 week. Low levels of petrol were detectable after 24 h on all carpet mats where the initial volume was 500 microL or more. The level of evaporation of the petrol detected increased with corresponding increases in the time period between transfer and analysis. The results of the persistence study indicate that small volumes of petrol (less than 100 microL) are unlikely to be detected on carpet after a 24 h period, and volumes of less than 1000 microL are unlikely to be detected on acoustic padding after this time period. Larger volumes may be detected after this period, but will generally not be detectable on either carpet or acoustic padding after 4 weeks. In each case, the petrol that is detected exhibits a chromatographic profile of greater than 60% evaporated petrol. These results demonstrate the significance of finding a large volume of fresh or slightly evaporated petrol on car carpet.
Publisher: Elsevier BV
Date: 04-2012
DOI: 10.1016/J.FORSCIINT.2011.10.030
Abstract: Several studies have indicated that there are potential environmental sources of particles resembling inorganic primer found in gunshot residues (GSR) as a consequence examiners are reluctant to unambiguously assign the origin of inorganic particles. If organic gunshot residues (OGSR) were found in combination with inorganic particles, the possibility of environmental sources could be potentially eliminated, thereby significantly enhancing the strength of the evidence. Methods have been previously described whereby GSR specimens can be analysed for the presence of OGSR or inorganic GRS (IGSR). However, no methods have been reported that allow the analysis of both OGSR and IGSR on the same specimen. Described in this article is a direct method using desorption electrospray ionisation-mass spectrometry (DESI-MS) for the detection of methyl centralite (MC), ethyl centralite (EC) and diphenylamine (DPA) on adhesive tape GSR stubs typically used for scanning electron microscopy-energy-dispersive X-ray (SEM-EDX) analysis. The optimisation of numerous parameters was conducted using an experimental design. The results indicate that direct analysis of these organic components of GSR is possible although some limitations were also identified. This initial investigation has also indicated that subjecting stubs to DESI analysis does not interfere with subsequent SEM-EDX analysis of primer residues therefore the technique described herein allows a comprehensive examination of GSR that would be highly probative in the event that both OGSR and IGSR are detected in the same specimen.
Publisher: Wiley
Date: 26-02-2013
Publisher: Elsevier BV
Date: 07-2013
DOI: 10.1016/J.FORSCIINT.2013.03.041
Abstract: This paper describes the application of a luminescent lipid stain, nile red, for the development of latent fingermarks on porous surfaces. An optimised formulation is presented that provides rapid development of latent fingermarks on porous surfaces that are or have been wet. A comparison with physical developer (PD), the method of choice to enhance such fingermarks, indicated that nile red was a simpler and more stable technique for the development of fingermarks. The nile red formulation showed similar performance to PD across a range of substrates and ageing conditions, although PD still showed greater sensitivity on five-year-old examination booklets used in a pseudo-operational study. The pseudo-operational trial also indicated that nile red consistently developed different fingermarks to those enhanced by PD, suggesting that it preferentially targets a different fraction of the latent fingermark deposit. Significantly, the compatibility of nile red in a detection sequence with indanedione-zinc, ninhydrin and PD is reported.
Publisher: Springer Science and Business Media LLC
Date: 22-09-2010
DOI: 10.1007/S00267-010-9564-5
Abstract: We compiled details of over 8000 assessments of protected area management effectiveness across the world and developed a method for analyzing results across erse assessment methodologies and indicators. Data was compiled and analyzed for over 4000 of these sites. Management of these protected areas varied from weak to effective, with about 40% showing major deficiencies. About 14% of the surveyed areas showed significant deficiencies across many management effectiveness indicators and hence lacked basic requirements to operate effectively. Strongest management factors recorded on average related to establishment of protected areas (legal establishment, design, legislation and boundary marking) and to effectiveness of governance while the weakest aspects of management included community benefit programs, resourcing (funding reliability and adequacy, staff numbers and facility and equipment maintenance) and management effectiveness evaluation. Estimations of management outcomes, including both environmental values conservation and impact on communities, were positive. We conclude that in spite of inadequate funding and management process, there are indications that protected areas are contributing to bio ersity conservation and community well-being.
Publisher: Elsevier BV
Date: 09-2014
DOI: 10.1016/J.FORSCIINT.2014.06.013
Abstract: Variation in the chemical composition of illicit tablets and powders is common among s les within a given drug seizure. Using microchip electrophoresis (ME), multiple tablets can be screened in a cost-effective and timely manner. This method could be used in conjunction with reporting methods that focus solely on statistical s ling to infer homogeneity or otherwise of a larger subset of tablets. Some frequently observed synthetic cathinones, often present in illicit tablets seized in New Zealand, were chosen for analysis. An ME device (Agilent Bioanalyzer 2100) was used to electrophoretically separate synthetic cathinones. The background electrolyte was composed of a 50 mM sodium tetraborate buffer with 50 mM sodium dodecyl sulphate at pH 9.66. Analytes were derivatised prior to analysis for 3 min at 90°C, employing fluorescein isothiocyanate isomer I (FITC). A characteristic fluorescent profile was obtained for each tablet, in terms of the number of constituents, relative peak height ratios and migration times. The repeatability of the developed method was assessed for a wide range of tablets and relative standard deviations of 0.4-5.2% and 1.6-5.5% were calculated for migration times and peak height ratios, respectively. The use of microchip tablet profiles in the forensic case comparison of illicit drug seizure s les in realistic scenarios is discussed.
Publisher: Elsevier BV
Date: 12-2009
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C5AY00306G
Abstract: A UHPLC method was developed for a broad range of OGSR compounds using ANNs and evaluated using simulated case s les.
Publisher: Wiley
Date: 29-10-2012
Publisher: Elsevier BV
Date: 12-2015
DOI: 10.1016/J.FORSCIINT.2015.08.029
Abstract: Physical developer (PD) is a fingermark development technique that deposits silver onto fingermark ridges. It is the only technique currently in routine operational use that gives results on porous substrates that have been wet. There is a reasonable understanding of the working solution chemistry, but the chemical constituent(s) contained in fingermark residue that are specifically targeted by PD are largely unknown. A better understanding of the PD technique will permit a more informed selection of alternative or complementary detection methods, and greater usage in operational laboratories. Recent research by our group has shown that PD does not selectively target the lipids present in the residue. This research investigated the hypothesis that PD targets the eccrine constituents in fingermark residue. This was tested by comparison of PD and indanedione-zinc (Ind-Zn) treated natural fingermarks that had been deposited successively, and marks that had been deposited with a ten second interval in between depositions. Such an interval allows for the regeneration of secretions from the pores located on the ridges of the fingers. On fingermark depletions with no time interval between depositions, PD and Ind-Zn treated depletions successively (and comparatively) decreased in development intensity as the amount of residue diminished. Short time intervals in between successive depletions resulted in additional secretions from the pores intermittently occurring, the increased development of which was visualised by treatment with both PD and Ind-Zn. The changes in development intensity were seen with both techniques on the same split depletions in a series, comparably and proportionately. These results indicate that the components targeted by PD are contained in the material excreted by the friction ridge pores through its mirrored development with Ind-Zn. Repetition of the experiments on marks that only contained eccrine material showed good Ind-Zn development but poor results with PD. This indicates that there are other constituents contained in "natural" fingermarks that are required to be present for PD to be able to target constituents in the eccrine sweat. It may be that the required constituents in the natural residues are non-water soluble, and that these protect the eccrine constituents from solubilisation in the aqueous washes employed in the PD method. Further research is being undertaken to determine whether PD is targeting specific compounds in the pore secretions, or a mixture of compounds consisting of the eccrine material, epidermal lipids and sebaceous lipids typically present in latent fingermark residues.
Publisher: Elsevier BV
Date: 12-2009
Publisher: Springer Science and Business Media LLC
Date: 31-10-2008
Publisher: Elsevier BV
Date: 03-2016
DOI: 10.1016/J.CHROMA.2016.01.054
Abstract: A novel microfluidic paper-based analytical device (μPAD) was designed to filter, extract, and pre-concentrate explosives from soil for direct analysis by a lab on a chip (LOC) device. The explosives were extracted via immersion of wax-printed μPADs directly into methanol soil suspensions for 10min, whereby dissolved explosives travelled upwards into the μPAD circular s ling reservoir. A chad was punched from the s ling reservoir and inserted into a LOC well containing the separation buffer for direct analysis, avoiding any further extraction step. Eight target explosives were separated and identified by fluorescence quenching. The minimum detectable amounts for all eight explosives were between 1.4 and 5.6ng with recoveries ranging from 53-82% from the paper chad, and 12-40% from soil. This method provides a robust and simple extraction method for rapid identification of explosives in complex soil s les.
Publisher: Elsevier BV
Date: 11-2014
DOI: 10.1016/J.FORSCIINT.2014.08.028
Abstract: An oil-in-water microemulsion containing a luminescent dye, nile red, has been synthesised using a solvent-diffusion method. This has been demonstrated to be effective in developing fresh latent fingermarks on porous surfaces. The working solution is made using a binary surfactant solution to create a lactescent dual organic-aqueous phase intermediate, which subsequently results in a transparent microemulsion after the organic solvent has evaporated. The solution is non-toxic and performs comparatively with a previously published methanolic formulation but at a much lower cost and with an extended shelf life. The microemulsion outperforms a previously reported aqueous nile blue formulation for the development of both charged and natural fresh fingermarks, and requires lower exposure times for image recording.
Publisher: Elsevier BV
Date: 08-2017
DOI: 10.1016/J.FORSCIINT.2017.06.013
Abstract: The main goal of the present study was to determine the amounts and distribution of organic gunshot residues (OGSR) on the shooter's upper body and clothing after discharging a pistol. A preliminary study was also performed to evaluate the prevalence of OGSR in the general population as well as in a police laboratory environment. In the transfer study, results indicated that OGSR are not only transferred to the hand of the shooter, but also to other parts of the upper body. Thus, wrists and forearms also represent interesting targets as they are washed less frequently than hands. S les from the face and hair of the shooters resulted in no OGSR detection just after firing. It was also observed that the concentrations recovered from clothing are generally higher compared to the same skin area. Prevalence in both general (n=27) and police populations (n=25) was low. No OGSR was detected in the s les from the general population and only two s les from the police population were found positive.
Publisher: Elsevier BV
Date: 04-2012
DOI: 10.1016/J.FORSCIINT.2011.10.033
Abstract: This article describes the use of an anti-Stokes luminescent material (upconverter), yttrium vanadate doped with ytterbium and erbium (YVO(4):Er,Yb), for the development of latent fingermarks on a range of non-porous surfaces. Anti-Stokes luminescent materials emit light at shorter wavelengths than the excitation wavelength. This property is unusual in both natural and artificial materials commonly found as exhibits in forensic science casework. As a result, fingermark detection techniques based on anti-Stokes luminescence are potentially extremely sensitive and selective. Latent fingermarks on non-luminescent and inherently luminescent substrates, including Australian polymer banknotes (a well-known 'difficult' surface), were developed with YVO(4):Er,Yb by dry powder and wet powder techniques. The effectiveness of YVO(4):Er,Yb for fingermark detection was compared with that of cyanoacrylate fuming and of sodium yttrium tetrafluoride doped with ytterbium and erbium (NaYF(4):Er,Yb). The results illustrate some benefit of luminescent up-converting phosphors over traditional luminescence techniques for the detection of latent fingermarks.
Publisher: Elsevier
Date: 2013
Publisher: Elsevier BV
Date: 08-2008
Publisher: Elsevier BV
Date: 05-2005
DOI: 10.1016/J.FORSCIINT.2004.06.036
Abstract: This study investigated the application of chemical imaging to the detection of latent fingerprints using the Condor macroscopic chemical imaging system (ChemImage Corp., Pittsburgh, USA). Methods were developed and optimised for the visualisation of untreated latent fingerprints and fingerprints processed with DFO, ninhydrin, cyanoacrylate, and cyanoacrylate plus rhodamine 6G stain. The results obtained with chemical imaging were compared to the detection achieved using conventional imaging techniques. The Condor significantly improved the detection of many prints, especially those that might be considered poor quality or borderline prints. Prints on newspaper treated with ninhydrin and DFO, and prints on white and yellow paper treated with ninhydrin, benefited the most from chemical imaging detection. In many cases, fingerprints undetectable using conventional imaging techniques could be visualised with chemical imaging. Ridge detail from untreated prints on yellow paper was also detected using the Condor. When prints of high quality were examined, both detection techniques produced quality results. The results of this project demonstrate that chemical imaging offers advantages over conventional visualisation techniques when examining latent fingerprints, especially those that would be considered difficult, such as weak prints or prints on surfaces that produce highly luminescent backgrounds. Standard testing procedures for the detection and enhancement of fingerprints by chemical imaging are presented and discussed.
Publisher: Wiley
Date: 21-02-2022
DOI: 10.1111/ADD.15832
Abstract: The current phase of the North American ‘opioid crisis’ is characterised by illicit fentanyl use however, the presence of illicit fentanyl in Australia is unknown. This study aimed to monitor unintentional fentanyl consumption in Australia. Rapid urine drug screens (UDS) paired with surveys conducted within supervised injecting facilities (SIFs) and confirmatory laboratory testing. Sydney and Melbourne, Australia. Clients who used heroin within the past 2 days ( n = 911 tests, 2017–2021). Participants were demographically similar to the overall client base (median age 43, 72% male). UDS were conducted using BTNX Rapid Response fentanyl urine strip tests with cross‐reactivity to numerous fentanyl analogues. Positive urine s les were analysed using liquid chromatography coupled with tandem mass spectrometry. Surveys covered past 3 day drug use and lifetime report of fentanyl in heroin. Two percent of participants reported intentional use of fentanyl, mostly through fentanyl patches. Of the 911 rapid UDS conducted, 17 (1.9%) yielded positive results. Eight of these (all from Melbourne) were not explained by survey‐reported fentanyl use in the past 3 days. Of these 8 unexplained positives, confirmatory laboratory analysis was conducted on 6, with 4 deemed to be false positives, and 2 confirmed for the presence of fentanyl. This represents the first confirmation of unintended use of fentanyl type substances in this population. There is limited evidence of unintentional fentanyl use among people in Sydney and Melbourne, Australia who regularly inject heroin, suggesting that, currently, there is very little illicit fentanyl in Australian drug markets accessed by supervised injecting facilities attendees. This study demonstrates the feasibility of quick onsite testing to cost‐effectively screen large s les for fentanyl however, the high false positive rate emphasises the need for confirmation of positive tests through advanced analytical techniques.
Publisher: Elsevier BV
Date: 11-2001
DOI: 10.1016/S0379-0738(01)00507-2
Abstract: A previously identified difficulty with the development of latent fingerprints on low-density polyethylene (LDPE) by vacuum metal deposition (VMD) is that excess gold deposition prevents effective zinc deposition and so inhibits latent print development [1]. The investigation of a means to correct for excess gold deposition was the basis for this study. Exposure to zinc and the readmission of air into the vacuum chamber followed by VMD development results in the deactivation of the initial gold clusters due to the formation of zinc oxide and the adsorption of air and water molecules. As a result, the majority of the gold deposited during the second treatment creates new gold clusters rather than adding to the gold clusters previously formed. After excess gold deposition on LDPE, the deposition of 1.5 times the optimum gold amount will result in good-quality normal development. The results also indicate that, on all surfaces, at least twice the initial gold count should be used for re-treatment when further development is required after air has been readmitted to the chamber.
Publisher: Wiley
Date: 23-07-2010
Abstract: CE with capacitively coupled contactless conductivity detection (C(4)D) was employed for the separation and detection of seven hetamine analogues as well as hetamine, dextro hetamine, meth hetamine and 3,4-methylenedioxymeth hetamine. The separation electrolyte was 30 mM hydroxypropyl-beta-cyclodextrin (HPbetaCD) in a 75 mM acetic acid+25 mM sodium acetate buffer adjusted to pH 4.55. Conductivity detection was compared with UV detection using this same electrolyte. Average detection limits for C(4)D and UV were 1.3 and 1.0 ppm, respectively. The effects of HPbetaCD concentration and BGE composition on the selectivity of the separation were also investigated. An illicit, street-grade s le of 3,4-methylenedioxymeth hetamine (Ecstasy) and a prescription dextro hetamine tablet were also analysed.
Publisher: Elsevier BV
Date: 09-2021
Publisher: Elsevier BV
Date: 08-2018
DOI: 10.1016/J.FORSCIINT.2018.06.014
Abstract: The primary aims of fingermark detection research are to improve the quality and increase the rate of detection of identifiable impressions. This is usually performed through the development of new methods and technologies to provide alternatives to or improve current procedures. While research of this nature is important to pursue, it fails to address the underlying question related to the factors that affect the detection of a latent fingermark. There has been significant research that has examined the differences between techniques, donors and fingermark age, as well as the composition of latent fingermarks. However, they tend not to focus on determining how these factors influence the quality of the developed mark. This study involved the development and evaluation of over 14,000 natural fingermarks deposited on a variety of surfaces to examine the effect of substrate, age, donor variability (both inter- and intra-), depletions and type of finger on fingermark development. Fingermarks were deposited on four substrates (two non-porous and two porous) and developed with either indanedione-zinc (IND-Zn) or cyanoacrylate followed by rhodamine 6G staining (CA+R6G). Three independent assessors graded each mark on the quality of development using an absolute scale proposed by the UK Centre for Applied Science and Technology (CAST). The data generated from these assessments were then analysed for trends or other useful insights. The results from this work reaffirm that in idual substrate characteristics (and the choice of development technique) play a significant role in determining the number and quality of marks developed. It was found that fingermarks were more likely to be detected on porous substrates and to also be of a higher quality than on non-porous. The effect of fingermark donor variability was also explored, with significant differences observed between donors and within donors. This research shows that current detection techniques do not detect all available fingermarks, reinforcing the need for further research into the fundamentals of fingermark detection in order to gain a better understanding of the techniques currently used. The study has identified considerations for the development of novel techniques and how we need to account for variability when designing fingermark research experiments.
Publisher: Elsevier BV
Date: 2015
DOI: 10.1016/J.FORSCIINT.2014.10.041
Abstract: This study focuses on methyl hetamine (MA) seizures made by the Australian Federal Police (AFP) to investigate the use of chemical profiling in an intelligence perspective. Correlation coefficients were used to obtain a similarity degree between a population of linked s les and a population of unlinked s les. Although it was demonstrated that a general framework can be followed for the use of any forensic case data in an intelligence-led perspective, threshold values have to be re-evaluated for each type of illicit drug investigated. Unlike the results obtained in a previous study on 3,4-methylenedioxymethyl hetamine (MDMA) seizures, chemical profiles of MA s les coming from the same seizure showed relative inhomogeneity, limiting their ability to link seizures. Different hypotheses were investigated to obtain a better understanding of this inhomogeneity although no trend was observed. These findings raise an interesting discussion in regards to the homogeneity and representativeness of illicit drug seizures (for intelligence purposes). Further, it also provides some grounds to discuss the initial hypotheses and assumptions that most forensic science studies are based on.
Publisher: Elsevier BV
Date: 06-2016
DOI: 10.1016/J.FORSCIINT.2016.04.007
Abstract: One-step luminescent cyanoacrylates have recently been introduced as an alternative to the conventional cyanoacrylate fuming methods. These new techniques do not require the application of a luminescent post-treatment in order to enhance cyanoacrylate-developed fingermarks. In this study, three one-step polymer cyanoacrylates: CN Yellow Crystals (Aneval Inc.), PolyCyano UV (Foster+Freeman Ltd.) and PECA Multiband (BVDA), and one monomer cyanoacrylate: Lumikit™ (Crime Scene Technology), were evaluated against a conventional two-step cyanoacrylate fuming method (Cyanobloom (Foster+Freeman Ltd.) with rhodamine 6G stain). The manufacturers' recommended conditions or conditions compatible with the MVC™ 1000/D (Foster+Freeman Ltd.) were assessed with fingermarks aged for up to 8 weeks on non-porous and semi-porous substrates. Under white light, Cyanobloom generally gave better development than the one-step treatments across the substrates. Similarly when viewed under the respective luminescent conditions, Cyanobloom with rhodamine 6G stain resulted in improved contrast against the one-step treatments except on polystyrene, where PolyCyano UV and PECA Multiband gave better visualisation. Rhodamine 6G post-treatment of one-step s les did not significantly enhance the contrast of any of the one-step treatments against Cyanobloom/rhodamine 6G-treated s les.
Publisher: CRC Press
Date: 12-2017
Publisher: Elsevier BV
Date: 09-2016
DOI: 10.1016/J.FORSCIINT.2016.07.012
Abstract: Impurities that are transferred to a crime scene or a body can have a significant negative impact on the investigation if the existence of the contamination is not known, and the source of the contamination is not identified. Forensic consumables, such as DNA swabs, have been known to have caused contaminations, wrongfully linking crimes throughout Europe. In that context, this study focused on body bags, widely used to transfer a corpse from the crime scene to the morgue. Our preliminary survey showed that several countries and Australian Jurisdictions are conducting the s ling of trace evidence at the morgue after the transportation of the body. Potential impurities present in body bags could thus interfere with pertinent traces. The aim of this work was to qualify and quantify the background contamination of trace evidence in body bags used within Australia. Fifteen body bags from four Australian Jurisdictions or laboratories were searched for micro traces. Impurities such as fibres and unidentified particles were detected in each examined body bag, with an estimated average of 3603 coloured fibres and 1429 unidentified particles. This number of fibres is similar to the amount found on a vinyl cinema seat in other studies. Various other contaminants such as pieces of fabric, hairs, parts of insects or feathers were also observed. It is hypothesised that these impurities are introduced during the manufacturing process. This high number of impurities can lead to incorrect conclusions and misleading investigative leads. This paper presents an overview of the problems these impurities can cause and proposes several strategies to prevent future issues.
Publisher: Elsevier BV
Date: 02-2022
DOI: 10.1016/J.FORSCIINT.2021.111166
Abstract: Fingermark variability is a critical parameter. To mitigate the effects of this variability, synthetic secretions in the form of simple mixtures of target compounds found in eccrine sweat have been described in the literature, but they are usually reactive towards only a minimal range of detection techniques. If this approach is acceptable for the production of single-technique test strips, such artificial secretions cannot be considered as reliable fingermark simulants because they do not reproduce the complex matrix that makes up real secretions. Research has shown that sebaceous and eccrine compounds are probably present simultaneously in fingermark residue in the form of an emulsion. This paper is the first part of a research project that aims at producing realistic artificial fingermarks containing an extensive range of eccrine and sebaceous compounds. This first study aimed to reproduce and compare two synthetic fingermark residues formulations and assess their potential to be used as fingermark simulants. Spot tests of the artificial secretions were deposited on paper substrates, and their reactivity with four common detection techniques was tested: 1,2-indanedione-zinc, ninhydrin, oil red O, and physical developer. Both formulations showed very good results when processed with the two amino acid reagents, as well as oil red O, and no obvious differences were observed between the two versions. The results obtained with the physical developer were inconsistent and demonstrated that the fundamental working principle of physical developer needs to be further understood. The results were extremely promising as they showed the potential of such reproducible artificial secretions to be used to assess an extensive range of detection techniques, which would be highly beneficial to guarantee better research and quality control in fingermark detection. The use of spot tests to deposit the simulant was shown to be unreliable and a more controllable and reproducible deposition method using an inkjet printer will be presented in the second part of this research.
Publisher: Elsevier BV
Date: 05-2020
Publisher: Informa UK Limited
Date: 12-2011
Publisher: Elsevier BV
Date: 05-2007
DOI: 10.1016/J.FORSCIINT.2006.06.006
Abstract: 1,2-indanedione is an emerging fingermark reagent used on porous surfaces. The general consensus is that this reagent is at least as sensitive as DFO, with some research showing higher sensitivity for 1,2-indanedione as opposed to DFO. However, a number of discrepancies existed in the literature as to which formulation and which development procedure produces optimal results. This project set out to investigate the best formulation and development procedure under Australian conditions, encompassing all published recommendations as well as some novel approaches. 1,2-indanedione formulations were compared with respect to initial colour, fluorescence, concentration of reagent, acetic acid concentration, and the effect of different carrier solvents. Numerous development conditions were investigated, including a conventional oven, a heat press and humidity. Further enhancement using metal salt treatment and liquid nitrogen was also evaluated. The heat press set at 165 degrees C for 10s proved to give the best initial colour and most intense luminescence. Secondary metal salt treatment improved initial colour and luminescence. The Polilight, the VSC 2000, and the Condor Chemical Imaging macroscope have been used to detect the fingerprints developed with 1,2-indanedione on a variety of high- and low-quality porous and semi-porous surfaces, with impressive results overall. Laboratory and field tests were conducted to compare 1,2-indanedione with DFO and ninhydrin as well as to investigate the position of 1,2-indanedione in the sequence of reagents for fingermark detection on porous surfaces. Overall, 1,2-indanedione proved to be a viable alternative to traditional methods for the detection of fingermarks on porous surfaces, with more fingermarks being developed using this reagent on real s les than both DFO and ninhydrin and a combination of the two reagents.
Publisher: Elsevier BV
Date: 15-08-2005
DOI: 10.1016/J.TALANTA.2005.03.042
Abstract: This study investigated various chemical imaging methods for the forensic analysis of paints, tapes and adhesives, inks and firearm propellants (absorption and photoluminescence in the UV-vis-NIR regions). Results obtained using chemical imaging technology were compared with those obtained using traditional techniques. The results show that chemical imaging offers significant advantages in the forensic context, for ex le the ability to display visual and spectral results side by side and to reduce s le preparation, hence minimizing the risk of contamination. Chemical imaging produced a greater discriminating power than traditional techniques for most evidence types. Chemical imaging also eliminated different brands of ammunition based on the fluorescence characteristics of the propellant grains preserving the evidence for further analysis. It is expected that this technology will find broader forensic applications in the future.
Publisher: Elsevier BV
Date: 15-08-2005
DOI: 10.1016/J.TALANTA.2005.03.041
Abstract: Artificial neural networks (ANNs) were utilised to validate illicit drug classification in the profiling method used at "Institut de Police Scientifique" of the University of Lausanne (IPS). This method established links between s les using a combination of principal component analysis (PCA) and calculation of a correlation value between s les. Heroin seizures sent to the IPS laboratory were analysed using gas chromatography (GC) to separate the major alkaloids present in illicit heroin. Statistical analysis was then performed on 3371 s les. Initially, PCA was performed as a preliminary screen to identify s les of a similar chemical profile. A correlation value was then calculated for each s le previously identified with PCA. This correlation value was used to determine links between drug s les. These links were then recorded in an Ibase((R)) database. From this database the notion of "chemical class" arises, where s les with similar chemical profiles are grouped together. Currently, about 20 "chemical classes" have been identified. The normalised peak areas of six target compounds were then used to train an ANN to classify each s le into its appropriate class. Four hundred and sixty-eight s les were used as a training data set. Sixty s les were treated as blinds and 370 as non-linked s les. The results show that in 96% of cases the neural network attributed the seizure to the right "chemical class". The application of a neural network was found to be a useful tool to validate the classification of new drug seizures in existing chemical classes. This tool should be increasingly used in such situations involving profile comparisons and classifications.
Publisher: Wiley
Date: 2010
DOI: 10.1111/J.1556-4029.2009.01242.X
Abstract: Comparability of data over time and between laboratories is a key issue for consideration in the development of global databases, and more broadly for quality assurance in general. One mechanism that can be utilized for evaluating traceability is an inter-laboratory trial. This paper addresses an inter-laboratory trial conducted across a number of Australian and New Zealand isotope ratio mass spectrometry (IRMS) laboratories. The main objective of this trial was to determine whether IRMS laboratories in these countries would record comparable values for the distributed s les. Four carbon containing and four nitrogen containing compounds were distributed to seven laboratories in Australia and one in New Zealand. The laboratories were requested to analyze the s les using their standard procedures. The data from each laboratory was evaluated collectively using International Standard ISO 13528 (Statistical methods for use in proficiency testing by inter-laboratory comparisons). "Warning signals" were raised against one participant in this trial. "Action signals" requiring corrective action were raised against four participants. These participants reviewed the data and possible sources for the discrepancies. This inter-laboratory trial was successful in providing an initial snapshot of the potential for traceability between the participating laboratories. The statistical methods described in this article could be used as a model for others needing to evaluate stable isotope results derived from multiple laboratories, e.g., inter-laboratory trials roficiency testing. Ongoing trials will be conducted to improve traceability across the Australian and New Zealand IRMS community.
Publisher: Elsevier
Date: 2013
Publisher: Informa UK Limited
Date: 06-2008
Publisher: Elsevier BV
Date: 2019
DOI: 10.1016/J.FORSCIINT.2018.10.032
Abstract: Single metal deposition (SMD II) is a fingermark detection technique based on the use of colloidal gold. The technique has been simplified and optimised over the years to become more reliable, sensitive and user-friendly. Physical developer (PD) is a well-established detection method based on silver deposition from a redox solution. This study presents an extensive comparison of SMD II against PD for fingermark detection on porous substrates. The two techniques were compared as (i) standalone methods, (ii) in sequence after the application of routine amino acids reagents (1,2-indanedione/zinc followed by ninhydrin), and (iii) after the substrates have been wet. More than 1000 fingermark specimens were processed. Overall, the performance of SMD II was judged to be inferior to that of PD therefore, SMD II cannot be recommended as a valid replacement for fingermark detection on porous substrates. Indanedione/zinc and ninhydrin application negatively impacts on SMD II performance and the technique gave inconsistent results across the selected range of porous substrates. Moreover, the detected fingermarks lacked contrast making their visualisation difficult. However, even if PD remains the technique of choice, SMD II showed significant potential. It proved to be less affected by donor variability and it can be applied on both porous and non-porous substrates. It did not lead to uncontrolled background staining that commonly occurs with PD. If contrast and consistency issues can be addressed in future research, SMD II may become a viable alternative to PD.
Publisher: Informa UK Limited
Date: 18-04-2018
Publisher: Elsevier BV
Date: 03-2003
DOI: 10.1016/S0379-0738(03)00002-1
Abstract: Detection and correct classification of gasoline is important for both arson and fuel spill investigation. Principal component analysis (PCA) was used to classify premium and regular gasolines from gas chromatography-mass spectrometry (GC-MS) spectral data obtained from gasoline sold in Canada over one calendar year. Depending upon the dataset used for training and tests, around 80-93% of the s les were correctly classified as either premium or regular gasoline using the Mahalanobis distances calculated from the principal components scores. Only 48-62% of the s les were correctly classified when the premium and regular gasoline s les were ided further into their winter/summer sub-groups. Artificial neural networks (ANNs) were trained to recognise premium and regular gasolines from the same GC-MS data. The best-performing ANN correctly identified all s les as either a premium or regular grade. Approximately 97% of the premium and regular s les were correctly classified according to their winter or summer sub-group.
Publisher: Elsevier BV
Date: 15-08-2005
DOI: 10.1016/J.TALANTA.2005.03.040
Abstract: Condoms may offer sexual assailants a simple and relatively effective means by which they may remove and dispose of the biological evidence of their contact with the victim. Without this valuable probative evidence, the investigator may need to turn to such alternative forms of physical evidence, such as the residue remaining from the condom lubricant, and any other additional lubricating substances, which may have been used by the assailant. In this study, 68 different condom and personal lubricant s les were analysed using micellar electrokinetic capillary chromatography (MEKC) with ultraviolet absorbance detection. The electropherograms were processed by principal component analysis (PCA) and classified with linear discriminant analysis. This classified 233 s les out of 263 into their correct s le group. An alternative method of classification in which the s le electropherograms were converted to vectors and a correlation was determined by the cosine of the angles between these vectors. This correctly classified 172 s les of the 296. Results indicate that the combination of CE with chemometric data treatment offers the potential of being a rapid and efficient means by which condom and personal lubricant s les may be differentiated. Although this analytical method at present lacks the sensitivity required for sexual assault swab analysis, it is hoped that future developments in instrumentation detection capabilities will permit its use one day as a routine casework tool.
Publisher: Elsevier BV
Date: 11-2016
Publisher: Elsevier BV
Date: 05-2019
DOI: 10.1016/J.SCIJUS.2019.01.007
Abstract: Gunshot residues (GSR) are an important forensic trace in firearm-related events. Currently, routine GSR analyses focus on the detection and characterisation of the inorganic components (IGSR). The increasing prevalence of heavy metal-free ammunition challenges these current protocols and there is an increasing interest in how the organic components of GSR (OGSR) can provide complementary information. Similar to the situation with IGSR, OGSR compounds originally deposited on the shooter during the firing process may further be transferred onto another in idual or surface. Hence, the aim of this study was to provide additional information regarding the risk of a secondary transfer of OGSR. Two scenarios were investigated, the first one related to the arrest process and the possibilities of a secondary transfer arising between a shooter onto a non-shooter (e.g. between a police officer and a person of interest (POI)). The second scenario concerned the transfer of OGSR onto the non-shooter after handling a firearm for few minutes without discharging it. One calibre was chosen, the .40 S&W calibre, used by several Australian State police forces. A secondary transfer was observed in all cases for the two scenarios investigated, for three compounds of interest: ethylcentralite (EC), diphenylamine (DPA), N-nitrosodiphenylamine (N-nDPA). The firearm handling scenario resulted in a larger secondary transfer to that of the arrest scenario. Overall, the amounts of OGSR detected on the non-shooter were generally lower than that detected on the shooter and controls after the arrest scenario. The results of this study provide complementary knowledge about OGSR, which can be further used to improve the current practice and the interpretation of OGSR evidence. In particular, it highlights that the secondary transfer proposition must be considered during the interpretation of forensic findings, especially when small amounts of OGSR target compounds are detected.
Publisher: Informa UK Limited
Date: 26-05-2023
Publisher: Elsevier BV
Date: 2008
DOI: 10.1016/J.FSIGEN.2007.07.001
Abstract: Since 1997 the analysis of DNA recovered from handled objects, or 'trace' DNA, has become routine and is frequently demanded from crime scene examinations. However, this analysis often produces unpredictable results. The factors affecting the recovery of full profiles are numerous, and include varying methods of collection and analysis. Communication between forensic laboratories in Australia and New Zealand has been limited in the past, due in some part to sheer distance. Because of its relatively small population and low number of forensic jurisdictions this region is in an excellent position to provide a collective approach. However, the protocols, training methods and research of each jurisdiction had not been widely exchanged. A survey was developed to benchmark the current practices involved in trace DNA analysis, aiming to provide information for training programs and research directions, and to identify factors contributing to the success or failure of the analysis. The survey was ided in to three target groups: crime scene officers, DNA laboratory scientists, and managers of these staff. In late 2004 surveys were sent to forensic organisations in every Australian jurisdiction and New Zealand. A total of 169 completed surveys were received with a return rate of 54%. Information was collated regarding s ling, extraction, lification and analysis methods, contamination prevention, s les collected, success rates, personnel training and education, and concurrent fingerprinting. The data from the survey responses provided an insight into aspects of trace DNA analysis, from crime scene to interpretation and management. Several concerning factors arose from the survey. Results collation is a significant issue being identified as poor and differing widely, preventing inter-jurisdictional comparison and intra-jurisdictional assessment of both the processes and outputs. A second point of note is the widespread lack of refresher training and proficiency testing, with no set standard for initial training courses. A common theme to these and other issues was the need for a collective approach to training and methodology in trace DNA analysis. Trace DNA is a small fraction of the evidence available in current investigations, and parallels to these results and problems will no doubt be found in other forensic disciplines internationally. The significant point to be realised from this study is the need for effective communication lines between forensic organisations to ensure that best practice is followed, ideally with a cohesive pan-jurisdictional approach.
Publisher: Elsevier BV
Date: 04-2020
Publisher: Elsevier BV
Date: 03-2010
DOI: 10.1016/J.SCIJUS.2009.11.005
Abstract: The recent report of the National Research Council of the U.S. National Academies "Strengthening Forensic Science in the United States: a Path Forward" found evidence that the level of scientific development and evaluation varies substantially among the forensic science disciplines. In this paper the status of trace evidence will be reviewed from an international perspective with particular reference to case studies. The paper will argue that the trace evidence discipline needs to learn from past experience and that serious coordinated action is required at an international level if trace evidence is to continue to meet the standards expected of forensic science in the future. The paper concludes that it is vital that trace evidence remains a key component of forensic investigation due to its important role in addressing the 'what happened' question.
Publisher: Hindawi Limited
Date: 2014
DOI: 10.1155/2014/965403
Abstract: In recent years, forensic scientists have become increasingly interested in the detection and interpretation of organic gunshot residues (OGSR) due to the increasing use of lead- and heavy metal-free ammunition. This has also been prompted by the identification of gunshot residue- (GSR-) like particles in environmental and occupational s les. Various techniques have been investigated for their ability to detect OGSR. Mass spectrometry (MS) coupled to a chromatographic system is a powerful tool due to its high selectivity and sensitivity. Further, modern MS instruments can detect and identify a number of explosives and additives which may require different ionization techniques. Finally, MS has been applied to the analysis of both OGSR and inorganic gunshot residue (IGSR), although the “gold standard” for analysis is scanning electron microscopy with energy dispersive X-ray microscopy (SEM-EDX). This review presents an overview of the technical attributes of currently available MS and ionization techniques and their reported applications to GSR analysis.
Publisher: Elsevier BV
Date: 2017
DOI: 10.1016/J.FORSCIINT.2016.11.027
Abstract: The current trend towards the implementation of organic gunshot residue (OGSR) analysis into gunshot residue (GSR) investigation protocols typically involves the sequential analysis of inorganic and organic GSR. However, to allow for the consecutive analysis of inorganic and organic GSR, specimens will often be stored for different lengths of time which may result in compounds of interest degrading. In order to optimise storage conditions, it is important to consider compound degradation on collection devices during storage. This study investigated the degradation over time of compounds potentially present in smokeless powders and OGSR on two collection devices, alcohol swabs and GSR stubs. Over a period of 63 days, the highest degree of degradation was found in the first four days. Interestingly, energetic compounds were generally found to be more stable than smokeless powder additives such as stabilisers including diphenylamine and ethyl centralite, which might be problematic considering that these compounds are common targets for OGSR. The findings can provide valuable information to operational forensic laboratories to optimise their storage durations.
Publisher: Elsevier BV
Date: 03-2013
DOI: 10.1016/J.FORSCIINT.2013.01.011
Abstract: Desorption electrospray ionisation mass spectrometry (DESI-MS) is an emerging analytical technique that enables in situ mass spectrometric analysis of specimens under ambient conditions. It has been successfully applied to a large range of forensically relevant materials. This review assesses and highlights forensic applications of DESI-MS including the analysis and detection of illicit drugs, explosives, chemical warfare agents, inks and documents, fingermarks, gunshot residues and drugs of abuse in urine and plasma specimens. The minimal specimen preparation required for analysis and the sensitivity of detection achieved offer great advantages, especially in the field of forensic science.
Publisher: Elsevier BV
Date: 10-2018
DOI: 10.1016/J.FORSCIINT.2018.08.005
Abstract: Metal-Organic Frameworks (MOFs) are porous crystalline structures, currently used as sensors, separation membranes, and as catalysts. Due to their physicochemical and optical properties, they have been recently proposed for fingermark detection. This study further explored their potential for fingermark detection. Natural fingermarks, as well as charged and protein-enriched marks, were used to test the efficiency of the technique. Various parameters, such as precursor concentration, pH, immersion time and detection protocols, were investigated and optimised. The performance of the optimised MOF-based method was then compared to that of routinely used techniques. The results obtained indicated that MOFs can effectively detect fingermarks, especially protein-rich marks such as marks contaminated with body fluids. However, after comparison and evaluation against benchmark techniques, results were judged to be inferior to those from currently employed detection methods. However, with further research and optimisation MOFs may be promising as an alternative to current powder suspension techniques.
Publisher: Elsevier BV
Date: 05-2023
Publisher: Informa UK Limited
Date: 20-06-2021
Publisher: Elsevier BV
Date: 04-1995
Publisher: Elsevier
Date: 2013
Publisher: Elsevier BV
Date: 05-1999
Publisher: Elsevier BV
Date: 2019
DOI: 10.1016/J.SCIJUS.2018.08.007
Abstract: The present study aimed at providing data to assess the secondary transfer of organic gunshot residues (OGSR). Three scenarios were evaluated in controlled conditions, namely displacing a firearm from point A to point B, a simple handshake and an arrest involving handcuffing on the ground. Specimens were collected from the firearm, the hands of the shooter and the non-shooter undergoing the secondary transfer in order to compare the amounts detected. Secondary transfer was observed for the three scenarios, but to a different extent. It was found that displacing a firearm resulted in secondary transfer in <50% of the experiments. The firearm also had an influence, as contrary to the pistol, no secondary OGSR were detected using the revolver. Shaking the hand of the shooter also transferred OGSR to the non-shooter's hand. In that case, the amount of OGSR was generally higher on the shooter than on the non-shooter. Finally, the largest secondary transfer was observed after the arrest with handcuffing with positive results in all cases using the pistol. In that scenario, the amounts on the shooter and the non-shooter were in the same range. This study highlights that the secondary transfer must be taken into account in the interpretation of OGSR. Indeed, an in idual's hands might be contaminated by handling a firearm or having physical contact with a shooter.
Publisher: Elsevier BV
Date: 04-2018
DOI: 10.1016/J.FORSCIINT.2018.01.024
Abstract: As a result of the worldwide deployment of surveillance cameras, authorities have gained a powerful tool that captures footage of activities of people in public areas. Surveillance cameras allow continuous monitoring of the area and allow footage to be obtained for later use, if a criminal or other act of interest occurs. Following this, a forensic practitioner, or expert witness can be required to analyse the footage of the Person of Interest. The examination ultimately aims at evaluating the strength of evidence at source and activity levels. In this paper, both source and activity levels are inferred from the trace, obtained in the form of CCTV footage. The source level alludes to features observed within the anatomy and gait of an in idual, whilst the activity level relates to activity undertaken by the in idual within the footage. The strength of evidence depends on the value of the information recorded, where the activity level is robust, yet source level requires further development. It is therefore suggested that the camera and the associated distortions should be assessed first and foremost and, where possible, quantified, to determine the level of each type of distortion present within the footage. A review of the 'forensic image analysis' review is presented here. It will outline the image distortion types and detail the limitations of differing surveillance camera systems. The aim is to highlight various types of distortion present particularly from surveillance footage, as well as address gaps in current literature in relation to assessment of CCTV distortions in tandem with gait analysis. Future work will consider the anatomical assessment from surveillance footage.
Publisher: Elsevier BV
Date: 10-2015
DOI: 10.1016/J.FORSCIINT.2015.05.027
Abstract: Despite significant ongoing research, a substantial proportion of latent fingermarks remain undetected in casework. Therefore, to improve existing detection techniques and to allow the development of new approaches, it is important to gain a better understanding of detection mechanisms rather than solely focusing on method formulations. As a starting point, it is crucial to gain a deeper understanding of the fingermark residue itself. Even if the chemical composition is reasonably well understood, little research has been reported on the physical aspects related to the deposition of fingermarks and their interactions with the environment and underlying substrates. This study aimed at exploring various techniques that can be used for the non-destructive visualisation of fingermarks before applying detection techniques. Both light and electron microscopy were investigated. Phase contrast imaging and environmental scanning electron microscopy, coupled with energy-dispersive X-ray spectrometry, proved to be essential tools for the study of latent fingermark deposits. These methods can be used to gather fundamental information that will add to our body of knowledge in this field.
Publisher: Elsevier BV
Date: 10-2020
Publisher: The Royal Society
Date: 05-08-2015
Abstract: The dominant conception of forensic science as a patchwork of disciplines primarily assisting the criminal justice system (i.e. forensics) is in crisis or at least shows a series of anomalies and serious limitations. In recent years, symptoms of the crisis have been discussed in a number of reports by various commentators, without a doubt epitomized by the 2009 report by the US National Academies of Sciences (NAS 2009 Strengthening forensic science in the United States: a path forward). Although needed, but viewed as the solution to these drawbacks, the almost generalized adoption of stricter business models in forensic science casework compounded with ever-increasing normative and compliance processes not only place additional pressures on a discipline that already appears in difficulty, but also induce more fragmentation of the different forensic science tasks, a tenet many times denounced by the same NAS report and other similar reviews. One may ask whether these issues are not simply the result of an unfit paradigm. If this is the case, the current problems faced by forensic science may indicate future significant changes for the discipline. To facilitate broader discussion this presentation focuses on trace evidence, an area that is seminal to forensic science both for epistemological and historical reasons. There is, however, little doubt that this area is currently under siege worldwide. Current and future challenges faced by trace evidence are discussed along with some possible answers. The current situation ultimately presents some significant opportunities to re-invent not only trace evidence but also forensic science. Ultimately, a distinctive, more robust and more reliable science may emerge through rethinking the forensics paradigm built on specialisms, revisiting fundamental forensic science principles and adapting them to the twenty-first century.
Publisher: Elsevier BV
Date: 04-2020
Publisher: Royal Society of Chemistry (RSC)
Date: 2013
DOI: 10.1039/C3LC50609F
Abstract: A new technique for the detection of explosives has been developed based on fluorescence quenching of pyrene on paper-based analytical devices (μPADs). Wax barriers were generated (150 °C, 5 min) using ten different colours. Magenta was found as the most suitable wax colour for the generation of the hydrophobic barriers with a nominal width of 120 μm resulting in fully functioning hydrophobic barriers. One microliter of 0.5 mg mL(-1) pyrene dissolved in an 80:20 methanol-water solution was deposited on the hydrophobic circle (5 mm diameter) to produce the active microchip device. Under ultra-violet (UV) illumination, ten different organic explosives were detected using the μPAD, with limits of detection ranging from 100-600 ppm. A prototype of a portable battery operated instrument using a 3 W power UV light-emitting-diode (LED) (365 nm) and a photodiode sensor was also built and evaluated for the successful automatic detection of explosives and potential application for field-based screening.
Publisher: Elsevier BV
Date: 08-2003
DOI: 10.1016/S0379-0738(03)00180-4
Abstract: The Maxcan fibre finder system is a product of Cox Analytical Systems, Sweden, and has been developed for the primary purpose of searching for fibres on tape lifts. This paper evaluates the ability of the Maxcan system to search for different fibre types and colours under varying conditions. The system performed effectively in most situations, although it did have problems with some search combinations that a human operator would also find difficult in a manual search. The Maxcan system has the added advantages of being objective, consistent and able to do large batch searches unattended. These attributes make it very useful where a large number of tapes need to be searched in casework and also in research where large quantities of data need to be gathered within a reasonable time.
Publisher: Elsevier BV
Date: 2014
DOI: 10.1016/J.SCIJUS.2013.08.006
Abstract: Traditional forensic drug profiling involves numerous analytical techniques, and the whole process is typically costly and may be time consuming. The aim of this study was to investigate the possibility of prioritising techniques utilised at the Australian Federal Police (AFP) for the chemical profiling of 3,4-methylenedioxymethyl hetamine (MDMA). The outcome would provide the AFP with the ability to obtain more timely and valuable results that could be used in an intelligence perspective. Correlation coefficients were used to obtain a similarity degree between a population of linked s les (within seizures) and a population of unlinked s les (between different seizures) and discrimination between the two populations was ultimately achieved. The results showed that gas chromatography-mass spectrometry (GC-MS) was well suited as a single technique to detect links between seizures and could be used in priority for operational intelligence purposes. Furthermore, the method was applied to seizures known or suspected (through their case information) to be linked to each other to assess the chemical similarity between s les. It was found that half of the seizures previously linked by the case number were also linked by the chemical profile. This procedure was also able to highlight links between cases that were previously unsuspected and retrospectively confirmed by circumstantial information. The findings are finally discussed in the broader forensic intelligence context, with a focus on how they could be successfully incorporated into investigations and in an intelligence-led policing perspective in order to understand trafficking markets.
Publisher: Elsevier BV
Date: 06-2022
DOI: 10.1016/J.FORSCIINT.2022.111267
Abstract: The analysis of gunshot residues (GSR) can provide important information with regard to the involvement of a person of interest (POI) in a firearm-related incident. Organic gunshot residues (OGSR) have been investigated in order to provide additional and complementary information to the traditional inorganic gunshot residue (IGSR) particles detected by scanning electron microscopy (SEM). Currently, many procedures and analytical methods have been developed to detect OGSR-related compounds collected from the shooter's hands. However, such studies provide no information regarding the inclusion of such results in an activity level evaluation for discharging a firearm. The aim of this article is to assess the feasibility of using the likelihood ratio (LR) approach as a tool to evaluate OGSR results for activity level propositions. The developed model focuses on the assignment of an LR for several compounds detected in OGSR. A simple worst-case simulation was investigated in order to assess the applicability of the LR approach to evaluate OGSR traces. This simulation highlighted the importance of addressing an appropriate pair of activity level propositions when evaluating the results.
Publisher: Wiley
Date: 2010
DOI: 10.1111/J.1556-4029.2009.01241.X
Abstract: A significant amount of research has been conducted into the use of stable isotopes to assist in determining the origin of various materials. The research conducted in the forensic field shows the potential of isotope ratio mass spectrometry (IRMS) to provide a level of discrimination not achievable utilizing traditional forensic techniques. Despite the research there have been few, if any, publications addressing the validation and measurement uncertainty of the technique for forensic applications. This study, the first in a planned series, presents validation data for the measurement of bulk nitrogen isotope ratios in ammonium nitrate (AN) using the DELTA(plus)XP (Thermo Finnigan) IRMS instrument equipped with a ConFlo III interface and FlashEA 1112 elemental analyzer (EA). Appropriate laboratory standards, analytical methods and correction calculations were developed and evaluated. A validation protocol was developed in line with the guidelines provided by the National Association of Testing Authorities, Australia (NATA). Performance characteristics including: accuracy, precision/repeatability, reproducibility/ruggedness, robustness, linear range, and measurement uncertainty were evaluated for the measurement of nitrogen isotope ratios in AN. AN (99.5%) and ammonium thiocyanate (99.99+%) were determined to be the most suitable laboratory standards and were calibrated against international standards (certified reference materials). All performance characteristics were within an acceptable range when potential uncertainties, including the manufacturer's uncertainty of the technique and standards, were taken into account. The experiments described in this article could be used as a model for validation of other instruments for similar purposes. Later studies in this series will address the more general issue of demonstrating that the IRMS technique is scientifically sound and fit-for-purpose in the forensic explosives analysis field.
Publisher: Oxford University Press (OUP)
Date: 09-06-2017
Publisher: Elsevier BV
Date: 03-2013
DOI: 10.1016/J.FORSCIINT.2013.01.003
Abstract: To date, forensic science has predominantly focused on generating evidence for judicial proceedings. While many recognise its broader and important contribution to the initial stages of the forensic process, resources do not seem to be employed efficiently. It is often discovered retrospectively that necessary information was previously available in a database or within existing files. Such information could have been proactively used in order to solve a particular case, a number of linked cases or better understand the criminal activity as a whole. This article reviews this broader contribution of forensic science, with a particular emphasis on drug intelligence at the Australian Federal Police (AFP) in Australia. Using the AFP as a model organisation, an overview of the current situation and the contribution of physical and chemical profiling are first discussed. The situation in Europe, and in particular in Switzerland, is also presented. It is argued that a change of attitude towards a more intelligence-led perspective is required in forensic science in general, and in drug profiling in particular.
Publisher: Informa UK Limited
Date: 12-2011
Publisher: Elsevier
Date: 2013
Publisher: Elsevier BV
Date: 2001
DOI: 10.1016/S0379-0738(00)00310-8
Abstract: Vacuum metal deposition (VMD) is an established technique for the development of latent fingerprints on non-porous surfaces. VMD has advantages over cyanoacrylate fuming, especially in circumstances where prints are old, have been exposed to adverse environmental conditions, or are present on semi-porous surfaces. Under normal circumstances, VMD produces 'negative' prints as zinc deposits onto the background substrate and not the print ridges themselves. A phenomenon of 'reverse' development, when zinc deposits onto the print ridges and not the background, has been reported by many authors but its causes have not been conclusively identified. Four plastic substrates were used in this study and these could be easily ided into two groups based on the types of development observed as the amount of deposited gold was increased. On group I plastics, identified as low-density polyethylene (LDPE), normal development then reverse development and finally no development resulted with increasing gold. On group II plastics, identified as high-density polyethylene (HDPE), normal development then over-development and finally poor-quality normal development resulted with increasing gold. Our results suggest that the difference between these plastic types causes variations in the gold film structure which in turn dictates the nature of the zinc deposition. On group I plastics, the structure and thickness of the gold film has been identified as the critical factor in the occurrence of normal or reverse development. Thin gold films on plastic substrates form small 'clusters' (or agglomerates) rather than the atoms being uniformly spread over the surface. The size and shape of these clusters is critical. Once the clusters reach a certain morphology, they no longer act as nucleation sites for zinc, and hence, zinc will not deposit onto the substrate. On group II plastics, results suggest that the gold clusters are smaller and more densely packed. Hence, even though the same amount of gold has been deposited, the gold clusters in this case do not reach the critical morphology and so continue to act as nucleation sites for zinc.Typically, zinc will not deposit onto the fingerprint ridges as the gold nucleation sites are buried within the print residue. However, when more gold is deposited, gold emerges at the surface of the latent print allowing zinc deposition onto the ridges. The rate of gold evaporation was found not to affect the structure of the gold film, although a slower rate of evaporation resulted in more effective deposition.
Publisher: Wiley
Date: 02-11-2021
DOI: 10.1002/DTA.3181
Abstract: In the area of illicit drugs, forensic case data have proven effective at detecting links between seizures and providing greater insights into illicit drug markets. This research explored the application of mathematical and statistical techniques to several chemical profiles of Australian methyl hetamine seizures. The main aim was to create and deliver a method that would expand the use of illicit drug profiling for strategic intelligence purposes, contributing to the fight against illicit drug trafficking. The use of comparison metrics and clustering analysis to determine links between existing illicit drug specimens and subsequent new specimens was evaluated and automated. Relational, temporal and spatial analyses were subsequently used to gain an insight into illicit drug markets. Relational analysis identified clusters of seizures central to the network. Temporal analysis then provided insights into the behaviour of distribution markets, specifically the emergence and extinction of certain clusters of seizures over time. Spatial analysis aided the understanding of the inter‐jurisdictional nature of illicit drug markets. These analyses allowed for the generation of strategic intelligence relating to when and where the Australian methyl hetamine illicit drug market was the most active. Additionally, the strategic level trends identified clusters of seizures that were worth investigating further. These clusters were explored through a case study, which exploited additional chemical profiling data to provide drug market knowledge at an operational level. In turn, the intelligence produced at various levels could allow relevant law enforcement agencies to take necessary measures in disrupting markets.
Publisher: Elsevier BV
Date: 06-2009
DOI: 10.1016/J.SCIJUS.2009.03.004
Abstract: The application of isotopic techniques to investigations requiring the provision of evidence to a Court is limited. The objective of this research was to investigate the application of light stable isotopes and isotope ratio mass spectrometry (IRMS) to solve complex forensic cases by providing a level of discrimination not achievable utilising traditional forensic techniques. Due to the current threat of organic peroxide explosives, such as triacetone triperoxide (TATP), research was undertaken to determine the potential of IRMS to differentiate s les of TATP that had been manufactured utilising different starting materials and/or manufacturing processes. In addition, due to the prevalence of pentaerythritoltetranitrate (PETN) in detonators, detonating cord, and boosters, the potential of the IRMS technique to differentiate PETN s les from different sources was also investigated. Carbon isotope values were measured in fourteen TATP s les, with three definite groups appearing in the initial s le set based on the carbon data alone. Four additional TATP s les (in a second set of s les) were distinguishable utilising the carbon and hydrogen isotopic compositions in idually, and also in combination with the oxygen isotope values. The 3D plot of the carbon, oxygen and hydrogen data demonstrated the clear discrimination of the four s les of TATP. The carbon and nitrogen isotope values measured from fifteen PETN s les, allowed s les from different sources to be readily discriminated. This paper demonstrates the successful application of IRMS to the analysis of explosives of forensic interest to assist in discriminating s les from different sources. This research represents a preliminary evaluation of the IRMS technique for the measurement of stable isotope values in TATP and PETN s les, and supports the dedication of resources for a full evaluation of this application in order to achieve Court reportable IRMS results.
Publisher: Informa UK Limited
Date: 06-12-2022
Publisher: Informa UK Limited
Date: 06-2009
Publisher: Royal Society of Chemistry (RSC)
Date: 2011
DOI: 10.1039/C1AY05078H
Publisher: Springer Science and Business Media LLC
Date: 12-02-2016
DOI: 10.1007/S00216-016-9357-7
Abstract: The detection and interpretation of gunshot residues (GSR) plays an important role in the investigation of firearm-related events. Commonly, the analysis focuses on inorganic particles incorporating elements derived from the primer. However, recent changes in ammunition formulations and possibility that particles from non-firearm sources can be indistinguishable from certain primer particles challenge the standard operational protocol and call for adjustments, namely the combination of inorganic and organic GSR analysis. Two protocols for the combined collection and subsequent analysis of inorganic and organic GSR were developed and optimised for 15 compounds potentially present in organic GSR (OGSR). These protocols were conceptualised to enable OGSR analysis by ultrahigh-performance liquid chromatography (UHPLC) coupled with UV detection and triple quadrupole tandem mass spectrometry (confirmation) and IGSR analysis by scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX). Using liquid extraction, the extraction recoveries from spiked swabs and stubs were ~80 % (50-98 % for swabs, 64-98 % for stubs). When the mixed OGSR standard was applied to the hands and recovered in the way that is usual for IGSR collection, GSR stubs performed significantly better than swabs (~30 %) for the collection of OGSR. The optimised protocols were tested and compared for combined OGSR and inorganic GSR analysis using s les taken at a shooting range. The most suitable protocol for combined collection and analysis of IGSR and OGSR involved collection using GSR stubs followed by SEM-EDX analysis and liquid extraction using acetone followed by analysis with UHPLC.
Publisher: Elsevier BV
Date: 12-2007
DOI: 10.1016/J.FORSCIINT.2006.09.014
Abstract: A new, highly fluorescent dye was synthesised using oleylamine combined with a perylene dianhydride compound. The new dye was characterised by 1H NMR, UV-vis spectroscopy and fluorescence spectroscopy as well as quantum yield. The dye was absorbed onto titanium dioxide nanoparticles for use as a fingerprint detection powder. The new fluorescent powder was applied to latent fingermarks deposited onto different non-porous surfaces and compared with commercial fluorescent powders. The powder exhibits strong fluorescence at 650-700 nm under excitation at 505 nm. On glass surfaces, the new powder gave images showing tertiary-level detail of the fingermark ridges with almost no background development. Compared with current magnetic fluorescent powders, the new powder was slightly weaker in fluorescence intensity but produced significantly less background development, resulting in good contrast between the fingermark and the substrate.
Publisher: Routledge
Date: 06-12-2017
Publisher: Elsevier BV
Date: 2017
DOI: 10.1016/J.FORSCIINT.2017.11.028
Abstract: Forensic science has traditionally focused the majority of its resources and objectives towards addressing Court-related questions. However, this view restricts the contribution of forensic science to one process and results in a loss of information as the investigative and intelligence roles are largely neglected. A forensic science discipline suffering from this imbalance is handwriting examination, which may be characterised as a time consuming and subjective process that is mostly carried out towards the end of the investigation for the purpose of judicial proceedings. In idual and habitual characteristics are the major handwriting features exploited, however alternate information concerning the author's native language could potentially be used as a key element in an intelligence framework. This research focussed on the detection of characteristics that differentiate Vietnamese and English Australian writers based on their English handwriting. The study began with the extraction of handwriting characteristics from the writing of people from the two populations. The data was analysed using a logistic regression model and a classification and regression tree (CRT). Each recognised four class characteristics that were capable of distinguishing between the two nationalities. The logistic regression and CRT models were both capable of correctly predicting 93% of cases. Their predictive capabilities were then tested and supported using blind exemplars in order to mirror casework settings. It appeared that when using their respective class characteristics, the two models were capable of differentiating English Australians from Vietnamese in the data set. This proof of concept research demonstrated the plausibility of exploiting this additional information from a handwriting trace and taking advantage of it in an intelligence-led framework.
Publisher: Elsevier BV
Date: 10-2020
Publisher: Elsevier BV
Date: 10-2017
DOI: 10.1016/J.FORSCIINT.2017.08.026
Abstract: Analysing and understanding cryptomarkets is essential to become proactive in the fight against the illicit drug trade. Such a research seeks to combine a ersity of indicators related to the virtual (darknet markets) and physical (the traditional "offline" market) aspects of the illicit drug trade to provide information on the distribution and consumption as well as to assess similarities/differences between the virtual and physical markets. This study analysed data that had previously been collected on cryptomarkets from December 2013 to March 2015. In this article, the data was extracted from two marketplaces, Evolution and Silk Road 2, and analysed to evaluate the illicit drug trade of the Australian virtual market (e.g. information about the supply and demand, trafficking flows, prices of illicit drugs and market share) and highlight its specificities. The results revealed the domestic nature of the virtual Australian illicit drug trade (i.e. Australian sellers essentially ship their products to local customers). This may explain the coherence between supply and demand. Particularly, the virtual Australian illicit drug trade is dominated by hetamine-type substances (ATS), mainly meth hetamine and 3,4-methylenedioxymeth hetamine (MDMA), and cannabis. Australia, as a shipping country, accounts for half of the meth hetamine offered and purchased on Silk Road 2. Moreover, it was observed that the online price fixed by Australian sellers for the considered illicit drugs is higher than for any other shipping countries, which is in line with previous studies. Understanding the virtual and physical drug market necessitates the integration and fusion of different perspectives to capture the dynamic nature of drug trafficking, monitor its evolution and finally improve our understanding of the phenomenon so policy makers can make informed decisions.
Publisher: Elsevier BV
Date: 03-2014
DOI: 10.1016/J.FORSCIINT.2013.12.045
Abstract: Forensic intelligence is a distinct dimension of forensic science. Forensic intelligence processes have mostly been developed to address either a specific type of trace or a specific problem. Even though these empirical developments have led to successes, they are trace-specific in nature and contribute to the generation of silos which h er the establishment of a more general and transversal model. Forensic intelligence has shown some important perspectives but more general developments are required to address persistent challenges. This will ensure the progress of the discipline as well as its widespread implementation in the future. This paper demonstrates that the description of forensic intelligence processes, their architectures, and the methods for building them can, at a certain level, be abstracted from the type of traces considered. A comparative analysis is made between two forensic intelligence approaches developed independently in Australia and in Europe regarding the monitoring of apparently very different kind of problems: illicit drugs and false identity documents. An inductive effort is pursued to identify similarities and to outline a general model. Besides breaking barriers between apparently separate fields of study in forensic science and intelligence, this transversal model would assist in defining forensic intelligence, its role and place in policing, and in identifying its contributions and limitations. The model will facilitate the paradigm shift from the current case-by-case reactive attitude towards a proactive approach by serving as a guideline for the use of forensic case data in an intelligence-led perspective. A follow-up article will specifically address issues related to comparison processes, decision points and organisational issues regarding forensic intelligence (part II).
Publisher: Elsevier BV
Date: 05-2013
DOI: 10.1016/J.FORSCIINT.2013.01.036
Abstract: The clandestine manufacture of meth hetamine in New Zealand predominantly involves the reduction of pseudoephedrine, extracted from pharmaceutical preparations, using hydrogen iodide. This method of illicit manufacture leaves a variety of materials at the scene that are a rich source of information. Efficient processing and preliminary identification of extraction and reaction mixtures, precursors and products is essential to minimise exposure to potential hazardous materials and to provide investigative and intelligence information. In this study, we employed a portable lab-on-a-chip instrument for the rapid and cost effective screening of meth hetamine, pseudoephedrine and ephedrine in a variety of s le types found in typical clandestine laboratory scenarios.
Publisher: Wiley
Date: 25-07-2011
DOI: 10.1111/J.1556-4029.2011.01846.X
Abstract: In current casework, most post-cyanoacrylate stains rely on luminescence emission in the visible region (400-700 nm). While traditional stains such as rhodamine 6G work well under most circumstances, some surfaces may generate background luminescence under the same conditions. Detection in the near-infrared region (NIR > 700 nm) has shown to be effective in minimizing the interferences from such surfaces. The laser dye styryl 11 generated strongly luminescent fingermarks when applied after cyanoacrylate fuming on all surfaces tested. When compared to rhodamine 6G, the dye was superior only when viewed in the NIR. Styryl 11 was subsequently combined with rhodamine 6G, and the mixed stain formulation (named StaR 11 by the authors) induced stronger luminescence compared with styryl 11 alone with an ability to visualize in both the visible and NIR regions. Reliable and consistent results were obtained when using either styryl 11 alone or the STaR 11 mixture. The enhancement achieved did not otherwise vary depending on the source of the fingermark secretions. With visualization possible in both the visible and NIR regions, the styryl 11/rhodamine 6G mixture showed significant potential as a post-cyanoacrylate stain.
Publisher: Elsevier BV
Date: 07-2013
DOI: 10.1016/J.FORSCIINT.2012.10.034
Abstract: The development of statistical models for forensic fingerprint identification purposes has been the subject of increasing research attention in recent years. This can be partly seen as a response to a number of commentators who claim that the scientific basis for fingerprint identification has not been adequately demonstrated. In addition, key forensic identification bodies such as ENFSI [1] and IAI [2] have recently endorsed and acknowledged the potential benefits of using statistical models as an important tool in support of the fingerprint identification process within the ACE-V framework. In this paper, we introduce a new Likelihood Ratio (LR) model based on Support Vector Machines (SVMs) trained with features discovered via morphometric and spatial analyses of corresponding minutiae configurations for both match and close non-match populations often found in AFIS candidate lists. Computed LR values are derived from a probabilistic framework based on SVMs that discover the intrinsic spatial differences of match and close non-match populations. Lastly, experimentation performed on a set of over 120,000 publicly available fingerprint images (mostly sourced from the National Institute of Standards and Technology (NIST) datasets) and a distortion set of approximately 40,000 images, is presented, illustrating that the proposed LR model is reliably guiding towards the right proposition in the identification assessment of match and close non-match populations. Results further indicate that the proposed model is a promising tool for fingerprint practitioners to use for analysing the spatial consistency of corresponding minutiae configurations.
Publisher: Elsevier BV
Date: 02-2018
Publisher: Elsevier BV
Date: 09-2017
DOI: 10.1016/J.SCIJUS.2017.05.001
Abstract: Traditionally, forensic science has predominantly focused its resources and objectives on addressing court related questions. However, this view restricts the contribution of forensic science to one function and results in lost opportunities as investigative and intelligence roles are often overlooked. A change of perspective and expansion of the contributions of forensic science is required to take advantage of the benefits of abductive and inductive thought processes throughout the investigative and intelligence functions. One forensic discipline that has the potential to broaden its traditional focus is handwriting examination. Typically used in investigations that are focused on both criminal and civil cases, the examination procedure and outcome are time consuming and subjective, requiring a detailed study of the features of the handwriting in question. Traditionally, the major handwriting features exploited are characteristics that are often considered in idual (or at least highly polymorphic) and habitual. However, handwriting can be considered as an information vector in an intelligence framework. One such ex le is the recognition of key elements related to the author's native language. This paper discusses the traditional method generally used around the world and proposes a theoretical approach to expand the application of handwriting examination towards gaining additional information for intelligence purposes. This concept will be designed and tested in a future research project.
Publisher: Elsevier BV
Date: 09-2019
DOI: 10.1016/J.FORSCIINT.2019.109911
Abstract: The information generated through drug profiling can be used to infer a common source between one or several seizures as well as drug trafficking routes to provide insights into drug markets. Although well established, it is time-consuming and ineffective to compare all drug profiles manually. In recent years, there has been a push to automate processes to enable a more efficient comparison of illicit drug specimens. Various chemometric methods have been employed to compare and interpret forensic case data promptly. The intelligence that is produced can be used by decision-makers to disrupt or reduce the impact of illicit drug markets. This review highlights the most common chemometric techniques used in drug profiling and more specifically, the most efficient comparison metrics and pattern recognition techniques outlined in the literature.
Publisher: Informa UK Limited
Date: 06-2009
Publisher: Elsevier BV
Date: 04-2011
DOI: 10.1016/J.FORSCIINT.2010.09.020
Abstract: This article describes the first use of an anti-Stokes material, or up-converter, for the development of latent fingermarks on a range of non-porous surfaces. Anti-Stokes materials can absorb long-wavelength light and emit light at a shorter wavelength. This property is unusual in both natural and artificial materials and so fingermark detection techniques based on anti-Stokes luminescence are potentially sensitive and selective. Latent fingermarks on luminescent and non-luminescent substrates, including Australian polymer banknotes (a well-known 'difficult' surface), were developed with sodium yttrium tetrafluoride doped with erbium and ytterbium (NaYF(4):Er,Yb) by dry powder, wet powder, and cyanoacrylate staining techniques. This study illustrates the potential of up-converter phosphors for the detection of latent fingermarks.
Publisher: Elsevier BV
Date: 05-2019
DOI: 10.1016/J.FORSCIINT.2019.02.038
Abstract: The application of nanoparticles for latent fingermark detection has been reported in the literature over the past two decades. One of the nanoparticles that shows promise to become a routine technique is functionalised silicon oxide nanoparticles (SiO
Publisher: Elsevier BV
Date: 02-2006
DOI: 10.1016/J.FORSCIINT.2005.03.012
Abstract: The key role of a forensic scientist is to assist in determining whether a crime has been committed, and if so, assist in the identification of the offender. Many people hold the belief that a particular item can be conclusively linked to a specific person, place or object. Unfortunately, this is often not achievable in forensic science. In performing their role, scientists develop and test hypotheses. The significance of those hypotheses that cannot be rejected upon completion of all available examinations/analyses is then evaluated. Although one can generally identify the substances present using available techniques, it is generally not possible to distinguish one source of the same substance from another. In such circumstances, although a particular hypothesis cannot be rejected, it cannot be conclusively proven, i.e. the s les could still have originated from different sources. This limitation of not being able to distinguish between sources currently extends to the analysis of other forensic s les including, but not limited to, ignitable liquids, paints, adhesives, textile fibres, plastics, and illicit drugs. Stable isotope ratio mass spectrometry (IRMS) is an additional technique that can be utilised to test a given hypothesis. This technique shows the potential to be able to in idualise a range of materials of forensic interest. This paper provides a brief description of the technique, followed by a review of the various applications of IRMS in different scientific fields. The focus of this summary is on forensic applications of IRMS, in particular the analysis of explosives, ignitable liquids and illicit drugs.
Publisher: Springer Science and Business Media LLC
Date: 14-07-2018
DOI: 10.1007/S11657-018-0493-X
Abstract: Research on non-communicable diseases (NCD) in Indigenous Australians has mostly focused on diabetes mellitus and chronic kidney or cardiovascular disease. Osteoporosis, characterised by low bone mass and structural deterioration of bone tissue, and sarcopenia, the age-related loss of muscle mass and strength, often co-exist with these common NCDs-the combination of which will disproportionately increase bone fragility and fracture risk and negatively influence cortical and trabecular bone. Furthermore, the social gradient of NCDs, including osteoporosis and fracture, is well-documented, meaning that specific population groups are likely to be at greater risk of poorer health outcomes: Indigenous Australians are one such group. This review summarises the findings reported in the literature regarding the muscle and bone health of Indigenous Australians. There are limited data regarding the musculoskeletal health of Indigenous Australians however, areal bone mineral density (aBMD) measured by dual-energy X-ray absorptiometry (DXA) is reported to be greater at the hip compared to non-Indigenous Australians. Falls are the leading cause of injury-related hospitalisations in older Australians, particularly Indigenous Australians, with a great proportion suffering from fall-related fractures. Despite sparse data, it appears that Indigenous men and women have a substantially higher risk of hip fracture at a much younger age compared to non-Indigenous Australians. Data on more detailed musculoskeletal health outcomes are required in Indigenous Australians to better understand fracture risk and to formulate evidence-based strategies for fracture prevention and to minimise the risk of falls.
Publisher: American Chemical Society (ACS)
Date: 05-05-2014
DOI: 10.1021/AC403062Y
Abstract: A new microfluidic paper-based analytical device (μPAD) in conjunction with confirmation by a lab on chip analysis was developed for detection of three trinitro aromatic explosives. Potassium hydroxide was deposited on the μPADs (0.5 μL, 1.5 M), creating a color change reaction when explosives are present, with detection limits of approximately 7.5 ± 1.0 ng for TNB, 12.5 ± 2.0 ng for TNT and 15.0 ± 2.0 ng for tetryl. For confirmatory analysis, positive μPADs were s led using a 5 mm hole-punch, followed by extraction of explosives from the punched chad in 30 s using 20 μL borate/SDS buffer. The extractions had efficiencies of 96.5 ± 1.7%. The extracted explosives were then analyzed with the Agilent 2100 Bioanalyzer lab on a chip device with minimum detectable amounts of 3.8 ± 0.1 ng for TNB, 7.0 ± 0.9 ng for TNT, and 4.7 ± 0.2 ng for tetryl. A simulated in-field scenario demonstrated the feasibility of coupling the μPAD technique with the lab on a chip device to detect and identify 1 μg of explosives distributed on a surface of 100 cm(2).
Publisher: Informa UK Limited
Date: 12-2007
Publisher: Elsevier BV
Date: 10-2011
DOI: 10.1016/J.FORSCIINT.2011.06.004
Abstract: Cyanoacrylate fuming is one of the most common techniques employed for the detection of latent fingermarks on non-porous surfaces such as plastic and glass. The technique is generally applied by exposing items of interest to the vapours generated by heating a suitable quantity of commercial cyanoacrylate adhesive. In this study, the potential for highly toxic hydrogen cyanide (HCN) to be generated from the overheating of cyanoacrylate was investigated. Two commercial cyanoacrylate adhesives and two quantitative methods for the determination of HCN were employed: (i) the sodium picrate method and (ii) the picrate-resorcinol method. (13)C nuclear magnetic resonance (NMR) analysis was used to confirm the presence of cyanide. In addition, the thermal decomposition of cyanoacrylate was studied using simultaneous thermogravimetric and differential thermal analysis (TGA-DTA). It was determined that detectable and quantifiable amounts of HCN were generated from the thermal decomposition of cyanoacrylate monomer and polymer at temperatures as low as 200 °C. Using an optimised picrate-resorcinol method, it was shown that around 10 μg of HCN could be generated from the heating of 1g of cyanoacrylate monomer at 200 °C. For one of the adhesives tested, this increased to above 100 μg of HCN when 1g of cyanoacrylate monomer was heated at 280 °C. Recommendations are provided that, if followed, should ensure that the cyanoacrylate fuming process can be safely applied with minimal risk to the operator.
Publisher: Elsevier BV
Date: 12-2001
DOI: 10.1016/S0379-0738(01)00593-X
Abstract: This study investigated fingerprint development on five different polymer substrates using vacuum metal deposition (VMD). The conditions required for optimum development are shown to depend on a number of factors. No one set of conditions will result in good development in all situations. Polymer type has been confirmed as a major factor in determining the types of development that will occur and the optimum VMD conditions required. For more consistently successful VMD development, polymer type should be determined before selecting conditions. While polymer type is a key factor in determining optimum development conditions, there may be variation of the optimum conditions within a polymer type, most likely due to the presence of additives in the plastic. The heaviness of a latent print, i.e. amount of residue that constitutes the print, also affects the VMD conditions required. The donor, manner of deposition, and age of a print affect the heaviness of the deposit. The heavier the print, the higher the gold count necessary for successful VMD development. The occurrence of 'empty prints' (i.e. zinc deposition on the general background but not on or between the print ridges) was found to be related to polymer type and print heaviness. Heavy prints on PVC and PET are the most likely to be 'empty' after VMD treatment. The development of empty prints may be due to the diffusion of print residue into the print valleys. Pre-treatment with cyanoacrylate fuming was also found to affect VMD development. In particular, it was shown that cyanoacrylate pre-treatment was beneficial for print development on PET and PVC. The results of this study were used to formulate guidelines for use as an aid by laboratories using VMD in casework.
Publisher: Informa UK Limited
Date: 07-03-2014
Publisher: Elsevier BV
Date: 10-2011
DOI: 10.1016/J.FORSCIINT.2011.06.005
Abstract: Anecdotal evidence from forensic practitioners and studies conducted under controlled conditions have indicated that the reaction between 1,2-indanedione and the amino acids present in latent fingermark deposits is highly susceptible to ambient humidity. The addition of catalytic amounts of zinc chloride to the 1,2-indanedione working solution--usually in the order of 1:25 to 1:4 molar ratio (indanedione:zinc)--significantly improves the colour and luminescence of fingermarks treated under dry conditions but appears to have a negligible effect on fingermarks treated in humid environments. The results presented in this paper confirmed that zinc(II) ions added to the 1,2-indanedione working solution act as a Lewis acid catalyst, stabilising a key intermediate during a rate-limiting hydrolysis step. Furthermore, studying the reaction using a chromatography-grade cellulose substrate method previously reported confirmed that cellulose substrates play a major role in facilitating the indanedione-amino acid reaction by acting as a surface catalyst in the early stages of the reaction and by directing the formation of the desired luminescent product (Joullié's Pink).
Publisher: Elsevier BV
Date: 11-2001
DOI: 10.1016/S0379-0738(01)00520-5
Abstract: Frequency figures of the fibre population on textile cinema seats were measured in Sydney, Australia, in winter. Sixteen seats were analysed from a very popular cinema complex, with 3025 fibres classified according to colour, generic class and fluorescence properties (100 grey-black cotton fibres only). The recovered fibres were mostly natural fibres (84%) with cotton the most common generic type (70%). On the contrary, man made fibres were relatively rare (15%) with rayon constituting the majority of these (51%). The most common colour/generic class combinations were grey-black cotton (33%) and blue cotton (30%) accounting for 63% of the total population. All other frequencies were below 5%, most below 1% using only the two properties of colour and generic class. Fluorescence properties were found to be very discriminating as far as grey-black cotton fibres were concerned. These features are considered and discussed and in particular, to emphasise the significance of fibres as evidence of contact.
Publisher: Elsevier BV
Date: 06-2012
DOI: 10.1016/J.FORSCIINT.2012.01.006
Abstract: Conventional fingermark powders rely on contrast induced by absorption/reflection (e.g. black powder) or luminescence in the visible region (e.g. Blitz Green(®)). In most cases, these powders provide sufficient contrast however, in some circumstances surface characteristics can interfere with the visualisation of powdered fingermarks. Visualisation in the near infra-red (NIR) region, however, has been shown to eliminate interferences commonly encountered in the visible region. In this study, a mixture of rhodamine 6G and the NIR laser dye styryl 11 (STaR 11) was coated onto an aluminium oxide nanopowder and then mixed with silver magnetic powder to develop and visualise fingermarks in the NIR. When compared to Blitz Green(®), it was determined that the STaR 11 magnetic powder was better suited for marks deposited on textured surfaces and for older marks, whereas Blitz Green(®) performed better on smooth glossy surfaces. The ability of the STaR 11 mixed dye formulation to be visualised in both the visible and NIR regions also provides a significant advantage over conventional luminescent fingermark powders.
Publisher: Oxford University Press (OUP)
Date: 08-2004
DOI: 10.1017/S143192760488588X
Abstract: Extended abstract of a paper presented at Microscopy and Microanalysis 2004 in Savannah, Georgia, USA, August 1–5, 2004.
Publisher: Elsevier BV
Date: 11-2019
DOI: 10.1016/J.DRUGPO.2019.03.025
Abstract: The rapid emergence of new psychoactive substances (NPS) is a challenge for public health authorities and law enforcement. The phenomenon is strengthened since the increase of the Internet usage. Not only used to trade NPS, the Web is an important source of information for both potential drug consumers and experienced users. Discussion forums are among these sources of information. They are meeting points for different groups of users and include a wide range of trip reports, questions and consumption tips. Since the discussions are archived over a long period, they can be used to monitor the interest of consumers for particular substances over time. This research aims at understanding the contribution of data extracted from a major online discussion forum within a systematic monitoring process. Data were collected from a discussion forum (i.e. Drugs-forum). Within the sections of the forum, the titles, content of discussion, number of replies, and the date of the first discussion were crawled and stored in a dedicated database. The intensity of the discussions related to 42 substances considered as NPS was measured through an indicator allowing to assess the popularity of substances. Furthermore, the appearance of 15 substances on the forum was compared to the date of formal notification to the EU early warning system. An evolution of the different classes of substances, as well as an evolution of specific substances within a class were highlighted. Some substances were discussed for a long period of time (e.g. Kratom, 25i-NBOMe, MDPV) while others were discussed very briefly (e.g. 5-MeO-DPT, NM-2AI). Out of the fifteen substances subjected to a risk assessment from the European Monitoring Centre for Drugs and Drug Addiction (EMCDDA), nine of them appeared on the forum before or at the same time as their first date of notification to the EU early warning system. In line with previous research on doping products, this article shows the potential of the monitoring of online forums in the context of psychoactive substances. Besides, the system designed to collect the data is flexible and can be systematically updated to fuel a monitoring process. It informs not only on the presence/absence of a substance in discussions between consumers, but also on its evolution over time. Such results could benefit academic research and organizations studying the NPS phenomenon. Precisely, it could complement existing early warning systems and benefit law enforcement agencies and policy makers.
Publisher: Elsevier
Date: 2013
Publisher: Elsevier BV
Date: 05-2013
DOI: 10.1016/J.FORSCIINT.2015.02.021
Abstract: The development of forensic intelligence relies on the expression of suitable models that better represent the contribution of forensic intelligence in relation to the criminal justice system, policing and security. Such models assist in comparing and evaluating methods and new technologies, provide transparency and foster the development of new applications. Interestingly, strong similarities between two separate projects focusing on specific forensic science areas were recently observed. These observations have led to the induction of a general model (Part I) that could guide the use of any forensic science case data in an intelligence perspective. The present article builds upon this general approach by focusing on decisional and organisational issues. The article investigates the comparison process and evaluation system that lay at the heart of the forensic intelligence framework, advocating scientific decision criteria and a structured but flexible and dynamic architecture. These building blocks are crucial and clearly lay within the expertise of forensic scientists. However, it is only part of the problem. Forensic intelligence includes other blocks with their respective interactions, decision points and tensions (e.g. regarding how to guide detection and how to integrate forensic information with other information). Formalising these blocks identifies many questions and potential answers. Addressing these questions is essential for the progress of the discipline. Such a process requires clarifying the role and place of the forensic scientist within the whole process and their relationship to other stakeholders.
Publisher: Elsevier BV
Date: 10-2013
DOI: 10.1016/J.FORSCIINT.2013.07.005
Abstract: Over the last decade, the development of statistical models in support of forensic fingerprint identification has been the subject of increasing research attention, spurned on recently by commentators who claim that the scientific basis for fingerprint identification has not been adequately demonstrated. Such models are increasingly seen as useful tools in support of the fingerprint identification process within or in addition to the ACE-V framework. This paper provides a critical review of recent statistical models from both a practical and theoretical perspective. This includes analysis of models of two different methodologies: Probability of Random Correspondence (PRC) models that focus on calculating probabilities of the occurrence of fingerprint configurations for a given population, and Likelihood Ratio (LR) models which use analysis of corresponding features of fingerprints to derive a likelihood value representing the evidential weighting for a potential source.
Publisher: Royal Society of Chemistry (RSC)
Date: 2011
DOI: 10.1039/C0CC05748G
Abstract: This anti- l -amino acid antibody system can enhance aged eccrine-rich latent fingermarks on non-porous surfaces, an area unexploited by current techniques.
Publisher: Elsevier BV
Date: 06-2022
DOI: 10.1016/J.FORSCIINT.2022.111275
Abstract: Investigations into the application of carboxyl-functionalised silicon oxide nanoparticles doped with a ruthenium complex (RuBpy-doped CES-SiO
Publisher: Informa UK Limited
Date: 06-2013
No related organisations have been discovered for Claude Roux.
Start Date: 08-2016
End Date: 08-2021
Amount: $235,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 2001
End Date: 12-2002
Amount: $290,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 2009
End Date: 06-2015
Amount: $669,329.00
Funder: Australian Research Council
View Funded ActivityStart Date: 11-2009
End Date: 12-2013
Amount: $107,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 07-2013
End Date: 12-2017
Amount: $260,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 10-2008
End Date: 12-2011
Amount: $207,762.00
Funder: Australian Research Council
View Funded ActivityStart Date: 08-2016
End Date: 08-2020
Amount: $275,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 08-2016
End Date: 08-2020
Amount: $380,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 02-2005
End Date: 12-2006
Amount: $311,381.00
Funder: Australian Research Council
View Funded ActivityStart Date: 01-2004
End Date: 12-2004
Amount: $10,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 07-2015
End Date: 12-2015
Amount: $430,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 2001
End Date: 12-2002
Amount: $352,000.00
Funder: Australian Research Council
View Funded Activity