ORCID Profile
0000-0001-9139-9835
Current Organisation
University of Queensland
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
In Research Link Australia (RLA), "Research Topics" refer to ANZSRC FOR and SEO codes. These topics are either sourced from ANZSRC FOR and SEO codes listed in researchers' related grants or generated by a large language model (LLM) based on their publications.
Functional materials | Materials engineering | Composite and hybrid materials | Chemical engineering not elsewhere classified | Wastewater Treatment Processes | Catalysis and mechanisms of reactions | Supramolecular chemistry | Electrochemistry | Carbon Capture Engineering (excl. Sequestration) | Membrane and Separation Technologies | Chemical Engineering | Nanofabrication growth and self assembly | Physical chemistry | Nanomaterials | Functional Materials | Materials Engineering | Composite and Hybrid Materials | Nanotechnology not elsewhere classified | Electrochemical energy storage and conversion
Expanding Knowledge in the Chemical Sciences | Biofuel (Biomass) Energy | Solar-Photovoltaic Energy | Expanding Knowledge in the Environmental Sciences | Expanding Knowledge in Engineering |
Publisher: Royal Society of Chemistry (RSC)
Date: 2022
DOI: 10.1039/D1NR08377E
Abstract: A quick, verstile and binder-free technique to generate MOF coatings on various substrates.
Publisher: Elsevier BV
Date: 03-2016
Publisher: MDPI AG
Date: 21-11-2021
Abstract: Non-alcoholic fatty liver disease (NAFLD) is becoming the leading cause of liver morbidity worldwide and, as such, represents the pathogenic background for the increasing incidence of hepatocellular carcinoma (HCC). The annual incidence of NAFLD-related HCC is expected to increase by 45–130% by 2030. Diabetes mellitus is the most important risk factor for HCC development in NAFLD, with the risk further increased when associated with other metabolic traits, such as obesity, arterial hypertension and dyslipidemia. The highest risk of HCC exists in patients with advanced fibrosis or cirrhosis, although 20–50% of HCC cases arise in NAFLD patients with an absence of cirrhosis. This calls for further investigation of the pathogenic mechanisms that are involved in hepatocarcinogenesis, including genetics, metabolomics, the influence of the gut microbiota and immunological responses. Early identification of patients with or at risk of NAFLD is of utmost importance to improve outcomes. As NAFLD is highly prevalent in the community, the identification of cases should rely upon simple demographic and clinical characteristics. Once identified, these patients should then be evaluated for the presence of advanced fibrosis or cirrhosis and subsequently enter HCC surveillance programs if appropriate. A significant problem is the early recognition of non-cirrhotic NAFLD patients who will develop HCC, where new biomarkers and scores are potential solutions to tackle this issue.
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C8TA07234E
Abstract: This work demonstrates the use of a bottom-up templated growth technique to prepare a continuous, vertically aligned 2D MOF coating.
Publisher: Wiley
Date: 11-03-2019
Publisher: Wiley
Date: 24-08-2023
Abstract: Lead mixed‐halide perovskites offer tunable bandgaps for optoelectronic applications, but illumination‐induced phase segregation can quickly lead to changes in their crystal structure, bandgaps, and optoelectronic properties, especially for the Br–I mixed system because CsPbI3 tends to form a non‐perovskite phase under ambient conditions. These behaviors can impact their performance in practical applications. By embedding such mixed‐halide perovskites in a glassy metal‐organic framework, a family of stable nanocomposites with tunable emission is created. Combining cathodoluminescence with elemental mapping under a transmission electron microscope, this research identifies a direct relationship between the halide composition and emission energy at the nanoscale. The composite effectively inhibits halide ion migration, and consequently, phase segregation even under high‐energy illumination. The detailed mechanism, studied using a combination of spectroscopic characterizations and theoretical modeling, shows that the interfacial binding, instead of the nanoconfinement effect, is the main contributor to the inhibition of phase segregation. These findings pave the way to suppress the phase segregation in mixed‐halide perovskites toward stable and high‐performance optoelectronics.
Publisher: Wiley
Date: 20-01-2022
Abstract: Biological ion channels feature angstrom‐scale asymmetrical cavity structures, which are the key to achieving highly efficient separation and sensing of alkali metal ions from aqueous resources. The clean energy future and lithium‐based energy storage systems heavily rely on highly efficient ionic separations. However, artificial recreation of such a sophisticated biostructure has been technically challenging. Here, a highly tunable design concept is introduced to fabricate monovalent ion‐selective membranes with asymmetric sub‐nanometer pores in which energy barriers are implanted. The energy barriers act against ionic movements, which hold the target ion while facilitating the transport of competing ions. The membrane consists of bilayer metal‐organic frameworks (MOF‐on‐MOF), possessing a 6 to 3.4‐angstrom passable cavity structure. The ionic current measurements exhibit an unprecedented ionic current rectification ratio of above 100 with exceptionally high selectivity ratios of 84 and 80 for K + /Li + and Na + / Li + , respectively (1.14 Li + mol m −2 h −1 ). Furthermore, using quantum mechanics/molecular mechanics, it is shown that the combined effect of spatial hindrance and nucleophilic entrapment to induce energy surge baffles is responsible for the membrane's ultrahigh selectivity and ion rectification. This work demonstrates a striking advance in developing monovalent ion‐selective channels and has implications in sensing, energy storage, and separation technologies.
Publisher: Elsevier BV
Date: 11-2018
Publisher: Springer Science and Business Media LLC
Date: 12-06-2019
DOI: 10.1038/S41467-019-10470-Z
Abstract: The majority of research into metal-organic frameworks (MOFs) focuses on their crystalline nature. Recent research has revealed solid-liquid transitions within the family, which we use here to create a class of functional, stable and porous composite materials. Described herein is the design, synthesis, and characterisation of MOF crystal-glass composites, formed by dispersing crystalline MOFs within a MOF-glass matrix. The coordinative bonding and chemical structure of a MIL-53 crystalline phase are preserved within the ZIF-62 glass matrix. Whilst separated phases, the interfacial interactions between the closely contacted microdomains improve the mechanical properties of the composite glass. More significantly, the high temperature open pore phase of MIL-53, which spontaneously transforms to a narrow pore upon cooling in the presence of water, is stabilised at room temperature in the crystal-glass composite. This leads to a significant improvement of CO 2 adsorption capacity.
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C5TA06013C
Abstract: Formation of water permeable microflow channels between graphene sheets with the addition of halloysite nanotubes.
Publisher: Wiley
Date: 15-02-2016
Publisher: American Association for the Advancement of Science (AAAS)
Date: 29-10-2021
Abstract: Lead halide perovskites can exhibit bright, narrow band photoluminescence but have stability issues related to formation of inactive phases and the loss of lead ions. Hou et al . show that the black, photoactive phase of cesium lead iodide can be stabilized by forming a composite with a glassy phase of a metal-organic framework through liquid-phase sintering. The photoluminescence is at least two orders of magnitude greater than that of the pure perovskite. The glass stabilizes the perovskite under high laser excitation, and about 80% of the photoluminescence was maintained after 10,000 hours of water immersion. —PDS
Publisher: MDPI AG
Date: 19-08-2017
DOI: 10.3390/APP7080856
Publisher: Elsevier BV
Date: 05-2018
Publisher: Elsevier BV
Date: 07-2022
Publisher: Elsevier BV
Date: 09-2019
Publisher: American Chemical Society (ACS)
Date: 06-09-2019
DOI: 10.1021/JACS.9B07557
Publisher: Authorea, Inc.
Date: 23-07-2023
DOI: 10.22541/AU.169014440.05935196/V1
Abstract: Metal-organic framework (MOF) glass is a versatile and processible material that retains its porous nature while transitioning between liquid and solid states. Incorporating composites into MOF glass can enhance its functionalities, but the effect on its state conversion remains understudied. This research explores the impact of silver ions on the properties of ZIF-62 glass, revealing their influence on phase conversion at varying ligand concentrations. The presence of silver enhances gas separation processes, particularly improving CO2 and hydrocarbon separation selectivity compared to pure ZIF-62 glass. These findings provide valuable insights for composite integration and highlight the potential of Ag-doped ZIF-62 glass in gas separation applications. Furthermore, this work paves the way for processing functional Ag-doped ZIF-62 glass films, enabling erse applications such as gas separation, film catalysis, and antimicrobial glass.
Publisher: Elsevier BV
Date: 02-2017
Publisher: Wiley
Date: 23-02-2016
Abstract: Metal-organic framework (MOF) materials have an enormous potential in separation applications, but to realize their potential as semipermeable membranes they need to be assembled into thin continuous macroscopic films for fabrication into devices. By using a facile immersion technique, we prepared ultrathin, continuous zeolitic imidazolate framework (ZIF-8) membranes on titania-functionalized porous polymeric supports. The coherent ZIF-8 layer was surprisingly flexible and adhered well to the support, and the composite membrane could sustain bending and elongation. The membranes exhibited molecular sieving behavior, close to the theoretical permeability of ZIF-8, with hydrogen permeance up to 201×10(-7) mol m(-2) s(-1) Pa(-1) and an ideal H2 /CO2 selectivity of 7:1. This approach offers significant opportunities to exploit the unique properties of MOFs in the fabrication of separation and sensing devices.
Publisher: American Chemical Society (ACS)
Date: 12-2017
Abstract: Though enzymatic cascade reactors have been the subject of intense research over the past few years, their application is still limited by the complicated fabrication protocols, unsatisfactory stability and lack of effective reactor designs. In addition, the spatial positioning of the cascade reactor has so far not been investigated, which is of significant importance for biphase catalytic reaction systems. Inspired by the Janus properties of the lipid cellular membrane, here we show a highly efficient Janus gas-liquid reactor for CO
Publisher: Wiley
Date: 02-2022
Abstract: Doping is an effective strategy for tuning metal oxide‐based semiconductors for solar‐driven photoelectrochemical (PEC) water splitting. Despite decades of extensive research effort, the dopant selection is still largely dependent on a trial‐and‐error approach. Machine learning (ML) is promising in providing predictable insights on the dopant selection for high‐performing PEC systems because it can uncover correlations from the seemingly ambiguous linkages between vast features of dopants and the PEC performance of doped photoelectrodes. Herein, the authors successfully build ML model to predict the doping effect of 17 metal dopants into hematite (Fe 2 O 3 ), a prototype photoelectrode material. Their findings disclose the critical parameters from the 10 intrinsic features of each dopant. The model is further experimentally validated by the coherent prediction on Y and La dopants’ behaviors. Further interpretation of the ML model suggests that the chemical state is the most significant selection criteria, meanwhile, dopants with higher metal–oxygen bond formation enthalpy and larger ionic radius are favored in improving the charge separation and transfer (CST) in the Fe 2 O 3 photoanodes. The generic feature of this ML guided selection criteria has been further extended to CuO‐based photoelectrodes showing improved CST by alkaline metal ions doping.
Publisher: American Chemical Society (ACS)
Date: 27-04-2020
Publisher: Wiley
Date: 17-09-2020
Abstract: This Review examines how the intermarriage of perovskite and metal‐organic framework crystals brings new paradigms for material design and functionality. The strategic combination of halide perovskites and metal–organic frameworks (MOFs) has generated a new family of porous composite materials that will enable new applications, including optoelectronic, catalysis, sensing, and data encryption. This Review surveys the current progress of this exciting new area. Fundamental aspects, including perovskite nucleation and growth, heterojunction electron–hole transfer, electronic structure, and luminescence within confined spaces, are highlighted, with suggestions of approaches by which guest confinement within MOFs can be synthetically designed. We further address the underlying principles and discuss the new insights and tools for the manipulation of these composite materials for the development of synthetic microporous semiconducting composites, as well as new strategies for host–guest interfacial engineering.
Publisher: Elsevier BV
Date: 2018
Publisher: Elsevier BV
Date: 2017
Publisher: Elsevier BV
Date: 12-2016
Publisher: Elsevier BV
Date: 12-2016
Publisher: American Chemical Society (ACS)
Date: 10-01-2019
Abstract: Pure metal-organic framework (MOF) layers deposited on porous supports are important candidates for molecular sieving membranes, but their performance usually deviates from theoretical estimations. Here, we combine step-wise scanning electron microscopy imaging, time-resolved synchrotron X-ray scattering, terahertz infrared spectroscopy, and density functional theory calculation to investigate the ZIF-8 membrane formation on two types (polydopamine and TiO
Publisher: American Chemical Society (ACS)
Date: 16-01-2020
DOI: 10.1021/ACS.NANOLETT.9B04732
Abstract: Vibrational spectroscopies directly record details of bonding in materials, but spatially resolved methods have been limited to surface techniques for mapping functional groups at the nanoscale. Electron energy loss spectroscopy (EELS) in the scanning transmission electron microscope presents a route to functional group analysis from nanoscale volumes using transmitted subnanometer electron probes. Here, we now use vibrational EELS to map distinct carboxylate and imidazolate linkers in a metal-organic framework (MOF) crystal-glass composite material. Domains <100 nm in size are observed using vibrational EELS, with recorded spatial resolution <15 nm at interfaces in the composite. This nanoscale functional group mapping is confirmed by correlated EELS at core ionization edges as well as X-ray energy dispersive spectroscopy for elemental mapping of the metal centers of the two constituent MOFs. These results present a complete nanoscale analysis of the building blocks of the MOF composite and establish spatially resolved functional group analysis using electron beam spectroscopy for crystalline and amorphous organic and metal-organic solids.
Publisher: Elsevier BV
Date: 03-2019
Publisher: Elsevier BV
Date: 10-2014
DOI: 10.1016/J.BIORTECH.2014.07.031
Abstract: The removal of micropollutant in wastewater treatment has become a key environmental challenge for many industrialized countries. One approach is to use enzymes such as laccase for the degradation of micropollutants such as bisphenol-A. In this work, laccase was covalently immobilized on APTES modified TiO2 nanoparticles, and the effects of particle modification on the bio-catalytic performance were examined and optimized. These bio-catalytic particles were then suspended in a hybrid membrane reactor for BPA removal with good BPA degradation efficiency observed. Substantial improvement in laccase stability was achieved in the hybrid system compared with free laccase under simulated harsh industrial wastewater treatment conditions (such as a wide range of pH and presence of inhibitors). Kinetic study provided insight of the effect of immobilization on the bio-degradation reaction.
Publisher: Springer Science and Business Media LLC
Date: 22-03-2019
DOI: 10.1038/S41467-019-08972-X
Abstract: Geometric or electronic confinement of guests inside nanoporous hosts promises to deliver unusual catalytic or opto-electronic functionality from existing materials but is challenging to obtain particularly using metastable hosts, such as metal–organic frameworks (MOFs). Reagents (e.g. precursor) may be too large for impregnation and synthesis conditions may also destroy the hosts. Here we use thermodynamic Pourbaix diagrams (favorable redox and pH conditions) to describe a general method for metal-compound guest synthesis by rationally selecting reaction agents and conditions. Specifically we demonstrate a MOF-confined RuO 2 catalyst (RuO 2 @MOF-808-P) with exceptionally high catalytic CO oxidation below 150 °C as compared to the conventionally made SiO 2 -supported RuO 2 (RuO 2 /SiO 2 ). This can be caused by weaker interactions between CO/O and the MOF-encapsulated RuO 2 surface thus avoiding adsorption-induced catalytic surface passivation. We further describe applications of the Pourbaix-enabled guest synthesis (PEGS) strategy with tutorial ex les for the general synthesis of arbitrary guests (e.g. metals, oxides, hydroxides, sulfides).
Publisher: Elsevier BV
Date: 03-2018
Publisher: Elsevier BV
Date: 12-2016
Publisher: Wiley
Date: 09-01-2018
Publisher: Royal Society of Chemistry (RSC)
Date: 2023
DOI: 10.1039/D3TA03192F
Abstract: Metal-organic frameworks (MOFs) are a group of highly tunable porous materials composed of metal nodes and organic linkers. Although MOF research has predominantly focused on crystalline frameworks, amorphous MOFs with...
Publisher: American Chemical Society (ACS)
Date: 28-04-2016
Publisher: Royal Society of Chemistry (RSC)
Date: 2020
DOI: 10.1039/D0CC04001K
Abstract: The dynamic structural transformation of Cu-MOFs during cell discharge and recharge involves irreversible frame-work amorphization and interconvertible single copper cations.
Publisher: Wiley
Date: 06-2023
DOI: 10.1002/EXP.20220145
Abstract: The past few decades have seen increasingly rapid advances in the field of sustainable energy technologies. As a new bio‐ and eco‐friendly energy source, enzymatic biofuel cells (EBFCs) have garnered significant research interest due to their capacity to power implantable bioelectronics, portable devices, and biosensors by utilizing biomass as fuel under mild circumstances. Nonetheless, numerous obstacles impeded the commercialization of EBFCs, including their relatively modest power output and poor long‐term stability of enzymes. To depict the current progress of EBFC and address the challenges it faces, this review traces back the evolution of EBFC and focuses on contemporary advances such as newly emerged multi or single enzyme systems, various porous framework‐enzyme composites techniques, and innovative applications. Besides emphasizing current achievements in this field, from our perspective part we also introduced novel electrode and cell design for highly effective EBFC fabrication. We believe this review will assist readers in comprehending the basic research and applications of EBFCs as well as potentially spark interdisciplinary collaboration for addressing the pressing issues in this field.
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C6TA10395B
Abstract: Graphene oxide (GO) has been considered as a promising candidate for molecular separation because of its capability to form highly efficient gas flow intergalleries within an ultrathin composite membrane.
Publisher: Wiley
Date: 20-07-2018
Abstract: Membranes are recognized as a key component in many environment and energy-related applications, but conventional membranes are challenged to satisfy the growing demand for ever more energy-efficient processes. Janus membranes, a novel class with asymmetric properties on each side, have recently emerged and represent enticing opportunities to address this challenge. With an inner driving force arising from their asymmetric configuration, Janus membranes are appealing for enhancing energy efficiency in a variety of membrane processes by promoting the desired transport. Here, the fundamental principles to prepare Janus membranes with asymmetric surface wettability and charges are summarized, and how they work in conventional and unconventional membrane processes is demonstrated.
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C9EN00692C
Abstract: NF membranes functionalized through bio-deposition of g-C 3 N 4 nanosheets have enhanced water permeability, dye retention and salt transmission, showing great potential for sustainable treatment of highly saline textile wastewater.
Publisher: Wiley
Date: 26-01-2022
DOI: 10.1111/ECI.13750
Abstract: To evaluate two‐dimensional shear wave elastography (2DSWE) in parallel with transient elastography (TE) for diagnosing clinically significant portal hypertension (CSPH) and high‐risk varices (HRV) in patients with chronic liver disease. Consecutive patients with suspicion of compensated advanced chronic liver disease (cACLD) [liver stiffness measurement (LSM) ≥ 10 kPa by TE, or morphological signs suggestive of cACLD on imaging], with no history of liver decompensation, underwent hepatic venous pressure gradient (HVPG) measurement, transjugular liver biopsy and esophagogastroduodenoscopy, which served as the reference methods for diagnosing CSPH, cACLD and HRV. All patients underwent LSM and spleen stiffness measurements (SSM) by 2DSWE and TE. Seventy‐six (76) patients were included (78% men, mean age 62 years, body mass index 28.3 kg/m 2 , 36.8% alcoholic, 30.3% non‐alcoholic fatty liver disease, 14.5% viral hepatitis). Of them, 80.3%, 69.7%, 52.6% and 22.4% had cACLD, cirrhosis, CSPH and HRV respectively. LSM performed better than SSM in diagnosing CSPH and HRV. For CSPH, AUROCs (0.926 vs. 0.866), optimal cut‐offs (20.1 vs. 20.2 kPa) and sensitivity/specificity (80.5%/94.3% vs. 77.5% /86.1%) were comparable for 2DSWE and TE. Ruling‐out of CSPH by 2DSWE (LSM at cut‐off with ≥90% sensitivity (13.5 kPa) and platelets ≥ 150 x 10 9 /L) performed comparably to TE, with 1/24 cases falsely classified as negative. For HRV, AUROCs were similar (0.875 2DSWE, 0.851 TE) with similar optimal LSM cut‐offs enabling 100% sensitivity and ruling‐out HRV. Liver stiffness measurement by 2DSWE appears to perform equally well as TE for diagnosing CSPH and ruling‐out HRV in compensated chronic liver disease.
Publisher: Royal Society of Chemistry (RSC)
Date: 2023
DOI: 10.1039/D2CS00315E
Abstract: This tutorial review presents an overview of the emerging metal–organic framework glass nanocomposite materials with special emphasis on demonstrating configuration, fabrication, and interfacial engineering techniques.
Publisher: Wiley
Date: 17-09-2020
Abstract: This Review examines how the intermarriage of perovskite and metal‐organic framework crystals brings new paradigms for material design and functionality. The strategic combination of halide perovskites and metal–organic frameworks (MOFs) has generated a new family of porous composite materials that will enable new applications, including optoelectronic, catalysis, sensing, and data encryption. This Review surveys the current progress of this exciting new area. Fundamental aspects, including perovskite nucleation and growth, heterojunction electron–hole transfer, electronic structure, and luminescence within confined spaces, are highlighted, with suggestions of approaches by which guest confinement within MOFs can be synthetically designed. We further address the underlying principles and discuss the new insights and tools for the manipulation of these composite materials for the development of synthetic microporous semiconducting composites, as well as new strategies for host–guest interfacial engineering.
Publisher: American Chemical Society (ACS)
Date: 22-05-2018
Abstract: Block copolymer materials have been considered as promising candidates to fabricate gas separation membranes. This microphase separation affects the polymer chain packing density and molecular separation efficiency. Here, we demonstrate a method to template microphase separation within a thin composite Pebax membrane, through the controllable self-assembly of one-dimensional halloysite nanotubes (HNTs) within the thin film via the solution-casting technique. Crystallization of the polyamide component is induced at the HNT surface, guiding subsequent crystal growth around the tubular structure. The resultant composite membrane possesses an ultrahigh selectivity (up to 290) for the CO
Publisher: American Chemical Society (ACS)
Date: 25-01-2019
Publisher: Elsevier BV
Date: 10-2020
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C9CC01468C
Abstract: This Feature Article reviews a range of amorphisation mechanisms of Metal–Organic Frameworks (MOFs) and presents recent advances to produce novel MOF materials including porous MOF glasses, MOF crystal–glass composites, flux melted MOF glasses and blended zeolitic imidazolate framework glasses.
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C8SC04044C
Abstract: We show flux melting by using a liquid MOF as a solvent for a secondary, non-melting MOF component.
Publisher: Elsevier BV
Date: 2019
DOI: 10.2139/SSRN.3365554
Publisher: Springer Science and Business Media LLC
Date: 05-11-2021
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C7TA10814A
Abstract: Two-dimensional nanomaterials are rapidly emerging as promising building blocks for the design of molecular sieving membranes with remarkable separation performance.
Publisher: American Chemical Society (ACS)
Date: 21-02-2019
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C7SC05175A
Abstract: The composite membranes with defective metal–organic frameworks (MOFs) show a significant increase in water flux, without compromising the high salt rejection.
Publisher: Elsevier BV
Date: 05-2017
Publisher: Elsevier BV
Date: 07-2016
Publisher: Elsevier BV
Date: 11-2020
Publisher: American Chemical Society (ACS)
Date: 24-01-2020
DOI: 10.1021/JACS.9B11639
Abstract: The synthesis of four novel crystalline zeolitic imidazolate framework (ZIF) structures using a mixed-ligand approach is reported. The inclusion of both imidazolate and halogenated benzimidazolate-derived linkers leads to glass-forming behavior by all four structures. Melting temperatures are observed to depend on both electronic and steric effects. Solid-state NMR and terahertz (THz)/far-IR demonstrate the presence of a Zn-F bond for fluorinated ZIF glasses. In situ THz/far-IR spectroscopic techniques reveal the dynamic structural properties of crystal, glass, and liquid phases of the halogenated ZIFs, linking the melting behavior of ZIFs to the propensity of the ZnN
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7TA03719H
Abstract: In this work, carbonic anhydrase (CA) molecules were embedded into metal–organic frameworks (MOFs) via physical absorption and chemical bonds, which could overcome the enzymatic inactivation and the poor separation property of pristine MOF materials.
Publisher: Elsevier BV
Date: 02-2019
Publisher: Elsevier BV
Date: 09-2017
DOI: 10.1016/J.JHAZMAT.2017.05.014
Abstract: High efficient enzyme immobilization on carbon based conductive supports could provide wide applications in energy and environmental science. Here, we synthesized a 3D flower-like structured self-assembly hybrid nanocomposite with copper phosphate, laccase, graphite oxide (GO) and carbon nanotubes (CNTs) via a facile one-pot strategy under mild conditions. The prepared nanocomposite exhibited very high enzyme loading and improved laccase activity. During the formation of the nanocomposite, the copper phosphate-laccase petals were interwined by CNTs, and GO nanosheets were further coated on the petal surface. Such a configuration ensured high enzyme loading between the GO sheets and good mass transfer efficiency between immobilized enzyme and substrate, which was confirmed by the kinetics test. We further deposited the immobilized enzyme onto electrodes and observed significantly improved direct electron transfer efficiency. Furthermore, higher dye removal efficiency was observed with the immobilized enzyme. The highly efficient enzyme immobilization strategy provides significant opportunity for its application in bioelectronics and wastewater treatment.
Publisher: Elsevier BV
Date: 11-2017
Publisher: Elsevier BV
Date: 2021
Publisher: Wiley
Date: 25-09-2019
Publisher: Elsevier BV
Date: 02-2017
Publisher: IOP Publishing
Date: 08-07-2016
DOI: 10.1088/1748-3190/11/4/041001
Abstract: Water scarcity is now one of the major global crises, which has affected many aspects of human health, industrial development and ecosystem stability. To overcome this issue, water desalination has been employed. It is a process to remove salt and other minerals from saline water, and it covers a variety of approaches from traditional distillation to the well-established reverse osmosis. Although current water desalination methods can effectively provide fresh water, they are becoming increasingly controversial due to their adverse environmental impacts including high energy intensity and highly concentrated brine waste. For millions of years, microorganisms, the masters of adaptation, have survived on Earth without the excessive use of energy and resources or compromising their ambient environment. This has encouraged scientists to study the possibility of using biological processes for seawater desalination and the field has been exponentially growing ever since. Here, the term biodesalination is offered to cover all of the techniques which have their roots in biology for producing fresh water from saline solution. In addition to reviewing and categorizing biodesalination processes for the first time, this review also reveals unexplored research areas in biodesalination having potential to be used in water treatment.
Publisher: Elsevier BV
Date: 10-2017
DOI: 10.1016/J.JENVMAN.2017.06.014
Abstract: White-rot fungi (WRF) and their ligninolytic enzymes have been investigated for the removal of a broad spectrum of trace organic contaminants (TrOCs) mostly from synthetic wastewater in lab-scale experiments. Only a few studies have reported the efficiency of such systems for the removal of TrOCs from real wastewater. Wastewater derived organic and inorganic compounds can inhibit: (i) WRF growth and their enzyme production capacity (ii) enzymatic activity of ligninolytic enzymes and (iii) catalytic efficiency of both WRF and enzymes. It is observed that essential metals such as Cu, Mn and Co at trace concertation (up to 1 mM) can improve the growth of WRF species, whereas non-essential metal such as Pb, Cd and Hg at 1 mM concentration can inhibit WRF growth and their enzyme production. In the case of purified enzymes, most of the tested metals at 1-5 mM concentration do not significantly inhibit the activity of laccases. Organic interfering compounds such as oxalic acid and ethylenediaminetetraacetic acid (EDTA) at 1 mM concentration are potent inhibitors of WRF and their extracellular enzymes. However, inhibitory effects induced by interfering compounds are strongly influenced by the type of WRF species as well as experimental conditions (e.g., incubation time and TrOC type). In this review, mechanisms and factors governing the interactions of interfering compounds with WRF and their ligninolytic enzymes are reviewed and elucidated. In addition, the performance of WRF and their ligninolytic enzymes for the removal of TrOCs from synthetic and real wastewater is critically summarized.
Publisher: American Chemical Society (ACS)
Date: 11-06-2021
Publisher: Royal Society of Chemistry (RSC)
Date: 2022
DOI: 10.1039/D2TA03216C
Abstract: Metal–organic frameworks (MOFs), sometimes also known as coordination polymers, are a very versatile group of materials consisting of metal nodes and organic linkers forming a tunable porous structure that can exist in different structural phases.
Publisher: Royal Society of Chemistry (RSC)
Date: 2023
DOI: 10.1039/D3YA00306J
Abstract: New opportunities and challenges associated with amorphous MOFs for energy storage.
Publisher: American Chemical Society (ACS)
Date: 22-05-2017
DOI: 10.1021/ACS.LANGMUIR.7B00537
Abstract: This study is an attempt to make a step forward to implement the very immature concept of pumpless transportation of liquid into a real miniaturized device or lab-on-chip (LOC) on a plastic substrate. "Inert" plastic materials such as polypropylene (PP) are used in a variety of biomedical applications but their surface engineering is very challenging. Here, it was demonstrated that with a facile innovative wettability patterning route using fluorosilanized UV-independent TiO
Publisher: Elsevier BV
Date: 11-2014
Publisher: American Chemical Society (ACS)
Date: 13-02-2018
Abstract: Blends containing ionic liquid (IL) 1-ethyl-3-methyimidazolium tetrafluoroborate [emim][BF
Publisher: Wiley
Date: 25-11-2021
Abstract: The melting behaviour of metal–organic frameworks (MOFs) has aroused significant research interest in the areas of materials science, condensed matter physics and chemical engineering. This work first introduces a novel method to fabricate a bimetallic MOF glass, through melt‐quenching of the cobalt‐based zeolitic imidazolate framework (ZIF) [ZIF‐62(Co)] with an adsorbed ferric coordination complex. The high‐temperature chemically reactive ZIF‐62(Co) liquid facilitates the formation of coordinative bonds between Fe and imidazolate ligands, incorporating Fe nodes into the framework after quenching. The resultant Co–Fe bimetallic MOF glass therefore shows a significantly enhanced oxygen evolution reaction performance. The novel bimetallic MOF glass, when combined with the facile and scalable mechanochemical synthesis technique for both discrete powders and surface coatings on flexible substrates, enables significant opportunities for catalytic device assembly.
Publisher: Royal Society of Chemistry (RSC)
Date: 2016
DOI: 10.1039/C6TA03205B
Abstract: Capsaicin-mimic materials are promising candidates for antifouling membrane fabrication.
Publisher: Springer Science and Business Media LLC
Date: 02-07-2020
Publisher: American Chemical Society (ACS)
Date: 12-12-2016
Abstract: Organized arrays of halloysite clay nanotubes have great potential in molecular separation, absorption, and biomedical applications. A highly oriented layer of halloysite on polyacrylonitrile porous membrane was prepared via a facile evaporation-induced method. Scanning electronic microscopy, surface attenuated total reflection Fourier transform infrared spectroscopy, and energy dispersive X-ray spectroscopy mapping indicated formation of the nanoarchitecture-controlled membrane. The well-ordered nanotube coating allowed for the excellent dye rejection (97.7% for reactive black 5) with high salt permeation (86.5% for aqueous NaCl), and thus these membranes were suitable for dye purification or concentration. These well-aligned nanotubes' composite membranes also showed very good fouling resistance against dye accumulation and bovine serum albumin adsorption as compared to the pristine polyacrylonitrile or membrane coated with disordered halloysite layer.
Publisher: Elsevier BV
Date: 06-2022
Publisher: Elsevier BV
Date: 2012
Publisher: Royal Society of Chemistry (RSC)
Date: 2022
DOI: 10.1039/D2NR01998A
Abstract: Management of antibiotic-resistant bacteria-induced skin infections for rapid healing remains a critical clinical challenge.
Publisher: Royal Society of Chemistry (RSC)
Date: 2016
DOI: 10.1039/C6TA02844F
Abstract: This review provides a comprehensive understanding of the surfaces and interfaces in fabrication, regulation and applications of organic–inorganic composite membranes.
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C7TA07512J
Abstract: Pebax-based composite hollow fiber membranes are fabricated with functionalized MOFs, and the effect of MOF rigidity is discussed.
Publisher: Royal Society of Chemistry (RSC)
Date: 2019
DOI: 10.1039/C9TA02299F
Abstract: Fabrication of MOF functionalized PA membranes with crumpled fishnet-like structures used for nanofiltration with rapid water transport and superior mono/ alent salt selectivity.
Publisher: Elsevier BV
Date: 12-2015
Publisher: Elsevier BV
Date: 06-2019
Publisher: Elsevier BV
Date: 04-2020
Publisher: American Chemical Society (ACS)
Date: 19-10-2017
Abstract: In this work, spatial patterning of a thin, dense, zeolitic imidazolate framework (ZIF-8) pattern was generated using photolithography and nanoscale (60 nm) dopamine coating. A bioinspired, unique, reversible, two-color iridescent pattern can be easily obtained for potential applications in sensing and photonics.
Publisher: American Chemical Society (ACS)
Date: 30-08-2023
Publisher: Royal Society of Chemistry (RSC)
Date: 2020
DOI: 10.1039/D0CC00664E
Abstract: In situ vitrification of MOF within polymer can rigidify the polymer chains and remove interfacial defects, leading to a significantly enhanced membrane selectivity.
Publisher: Royal Society of Chemistry (RSC)
Date: 2020
DOI: 10.1039/C9SC04961D
Abstract: This perspective links the synthesis of MOF Gels to the formation of MOF-monoliths and their resultant properties and application.
Publisher: Elsevier BV
Date: 05-2017
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C5TA01756D
Abstract: A novel Janus membrane concept was proposed. The immobilized CA was located near the gas–liquid interface, therefore maximizing its efficiency.
Publisher: Elsevier BV
Date: 03-2018
Publisher: Frontiers Media SA
Date: 24-03-2021
Publisher: IOP Publishing
Date: 11-2019
DOI: 10.1088/1757-899X/703/1/012029
Abstract: Novel porous materials like metal organic frameworks have shown good promise in catalysis, separation, sensing and adsorption. Compared with the conventional polymeric membranes, metal organic framework membranes usually exhibit higher separation efficiency. However, there are still many challenges which need to be addressed, like the interfacial compatibility within the mixed matrix membrane, defective engineering and stability of the framework stability. We will discuss our strategies to solve these problems towards better membranes. On top of the conventional separation membranes, metal organic framework materials can be applied to construct the artificial cellular membranes for bioentities and even living cells. The porous crystal provides exoskeleton to protect the soft biomolecules and their combination can enable a series bioapplications like catalysis, drug delivery and drug release.
Publisher: Elsevier BV
Date: 08-2019
Publisher: American Chemical Society (ACS)
Date: 10-09-2018
DOI: 10.26434/CHEMRXIV.7058033.V1
Abstract: Recent demonstrations of melting in the metal-organic framework (MOF) family have createdinterest in the interfacial domain between inorganic glasses and amorphous organic polymers. Thechemical and physical behaviour of porous hybrid liquids and glasses is of particular interest,though opportunities are limited by the inaccessible melting temperatures of many MOFs. Here,we show that the synthetic processing technique of flux melting, ‘borrowed’ from the inorganicdomain, may be applied to MOFs in order to melt materials which do not possess an accessibleliquid state in their pure form. We employ the high-temperature liquid state of one MOF as a solventfor a secondary, non-melting MOF component. Differential scanning calorimetry, small- and wideangleX-ray scattering, electron microscopy and X-ray total scattering techniques are used to showthe flux melting of the crystalline component within the liquid. Gas adsorption and positronannihilation lifetime spectroscopy measurements show that this results in enhanced, accessibleporosity to a range of guest molecules, in the resultant flux melted MOF glass.
Publisher: Elsevier BV
Date: 10-2020
Publisher: American Chemical Society (ACS)
Date: 17-07-2020
DOI: 10.26434/CHEMRXIV.8921765.V1
Abstract: Metal-organic framework crystal-glass composites (MOF-CGCs) are materials in which a crystalline MOF is dispersed within a MOF glass. In this work, we explore the room temperature stabilisation of the open-pore form of MIL-53(Al), usually observed at high-temperature, which occurs upon encapsulation within a ZIF-62(Zn) MOF glass matrix. A series of MOF-CGCs containing different loadings of MIL-53 were synthesised and characterised using X-ray diffraction and nuclear magnetic resonance spectroscopy. An upper limit of MIL-53 that can be stabilised in the composite was determined. The nanostructure of the composites was probed using pair distribution function analysis and scanning transmission electron microscopy. The distribution and integrity of the crystalline component was determined, and these findings related to the MOF-CGC gas adsorption capacity in order to identify the optimal loading necessary for maximum CO 2 sorption capacity.
Publisher: Wiley
Date: 12-07-2017
Abstract: Herein, we demonstrate that the intramolecular electron transfer within a single enzyme molecule is an important alternative pathway that can be harnessed to generate electricity. By decoupling the redox reactions within a single type of enzyme (for ex le, Trametes versicolor laccase), we harvested electricity efficiently from unconventional fuels including recalcitrant pollutants (for ex le, bisphenol A and hydroquinone) in a single-laccase biofuel cell. The intramolecular electron-harnessing concept was further demonstrated with other enzymes, including power generation during CO
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C8TA05687K
Abstract: Filtration-assisted preparation of high-performance nanofilm composite membranes used for nanofiltration with fast water transport and excellent mono/ alent salt selectivity.
Publisher: Elsevier BV
Date: 10-2017
Publisher: American Chemical Society (ACS)
Date: 18-09-2018
DOI: 10.26434/CHEMRXIV.7093862.V1
Abstract: The majority of research into metal-organic frameworks (MOFs) focuses on their crystalline nature. However, in recent research the vitrification of a number of MOFs has been revealed. We propose that the solid-liquid phase transitions involved in MOF-glass formation can provide unique opportunities for the creation of a new class of functional, stable and porous composite materials. Described herein is the design, synthesis, and characterisation of novel metal-organic framework (MOF) crystal-glass composites, formed by dispersing crystalline MOFs within a MOF-glass matrix. We demonstrate using structural characterisation and analytical electron tomography, that the coordinative bonding and chemical structure of a MIL-53 crystalline phase are preserved within the ZIF-62 glass matrix. Whilst separated phases, the microdomains of each lie close to one another and possess interfacial interactions which improve the mechanical properties of the composite glass. More significantly, the high temperature open pore phase of MIL-53, which spontaneously transforms to a narrow pore upon cooling, is stabilized at room temperature in the crystal-glass composite. This leads to a significantly higher gas adsorption capacity for the crystal-glass composite than for either constituent phase.
Publisher: Elsevier BV
Date: 02-2014
Publisher: Elsevier BV
Date: 12-2017
Publisher: American Chemical Society (ACS)
Date: 18-04-2019
DOI: 10.26434/CHEMRXIV.7093862.V2
Abstract: The majority of research into metal-organic frameworks (MOFs) focuses on their crystalline nature. However, in recent research the vitrification of a number of MOFs has been revealed. We propose that the solid-liquid phase transitions involved in MOF-glass formation can provide unique opportunities for the creation of a new class of functional, stable and porous composite materials. Described herein is the design, synthesis, and characterisation of novel metal-organic framework (MOF) crystal-glass composites, formed by dispersing crystalline MOFs within a MOF-glass matrix. We demonstrate using structural characterisation and analytical electron tomography, that the coordinative bonding and chemical structure of a MIL-53 crystalline phase are preserved within the ZIF-62 glass matrix. Whilst separated phases, the microdomains of each lie close to one another and possess interfacial interactions which improve the mechanical properties of the composite glass. More significantly, the high temperature open pore phase of MIL-53, which spontaneously transforms to a narrow pore upon cooling, is stabilized at room temperature in the crystal-glass composite. This leads to a significant improvement of CO 2 adsorption capacity.
Publisher: American Chemical Society (ACS)
Date: 05-03-2021
DOI: 10.26434/CHEMRXIV.14156732
Abstract: The development of adsorbents into structured and robust forms remains a challenge for emerging porous materials. In the context of porous boron nitride (BN), studies point to a tradeoff between mechanical stability, porosity, density, and adsorption kinetics. Approaches towards shaping and densification of porous BN have been mostly empirical since a detailed understanding of its formation mechanism, and how it impacts mechanical strength and porosity, is lacking. Here, we demonstrate a synthesis method that can directly produce a mechanically robust monolithic porous BN (mpBN) from an easily scalable polymeric precursor, which results in the highest volumetric surface area among porous BN s les to date. mpBN exhibits a high bulk density, 50% higher than BN powders and over ten times higher than the structured BN aerogels, while maintaining fast sorption kinetics. mpBN presents good mechanical strength, with hardness of 66.4 ± 4.5 MPa, i i.e. /i one to two orders of magnitude higher than structured aerogels. We propose a mpBN formation mechanism which reveals that the crosslinked intermediates are responsible for the high mechanical strength of the final material. Our approach produces a form of BN that addresses the limitations of other adsorbents, and facilitate their application in gas separation and storage technologies. br
Publisher: Royal Society of Chemistry (RSC)
Date: 2016
DOI: 10.1039/C5TA08024J
Abstract: Surface zwitterionization of graphene oxide (GO) was firstly conducted by grafting poly(sulfobetaine methacrylate) (PSBMA) onto the GO surface via reverse atom transfer radical polymerization (RATRP).
Publisher: Royal Society of Chemistry (RSC)
Date: 2021
DOI: 10.1039/D1TA02001C
Abstract: The development of adsorbents into structured and robust forms remains a challenge for emerging porous materials. Here, we address this challenge via a bottom-up approach to produce structured porous boron nitride.
Publisher: American Chemical Society (ACS)
Date: 06-01-2017
Abstract: Metal-organic frameworks (MOFs) are studied for the design of advanced nanocomposite membranes, primarily due to their ultrahigh surface area, regular and highly tunable pore structures, and favorable polymer affinity. However, the development of engineered MOF-based membranes for water treatment lags behind. Here, thin-film nanocomposite (TFN) membranes containing poly(sodium 4-styrenesulfonate) (PSS) modified ZIF-8 (mZIF) in a polyamide (PA) layer were constructed via a facile interfacial polymerization (IP) method. The modified hydrophilic mZIF nanoparticles were evenly dispersed into an aqueous solution comprising piperazine (PIP) monomers, followed by polymerizing with trimesoyl chloride (TMC) to form a composite PA film. FT-IR spectroscopy and XPS analyses confirm the presence of mZIF nanoparticles on the top layer of the membranes. SEM and AFM images evince a retiform morphology of the TFN-mZIF membrane surface, which is intimately linked to the hydrophilicity and adsorption capacity of mZIF nanoparticles. Furthermore, the effect of different ZIF-8 loadings on the overall membrane performance was studied. Introducing the hydrophilizing mZIF nanoparticles not only furnishes the PA layer with a better surface hydrophilicity and more negative charge but also more than doubles the original water permeability, while maintaining a high retention of Na
Publisher: Royal Society of Chemistry (RSC)
Date: 2015
DOI: 10.1039/C4TA05760K
Abstract: Novel TiO 2 based biocatalytic nanoparticles and membranes were prepared, which could be used for CO 2 conversion in gas–liquid membrane contactors.
Publisher: Wiley
Date: 10-02-2020
DOI: 10.1002/AIC.16935
Publisher: American Chemical Society (ACS)
Date: 30-08-2018
Abstract: An ultrastretchable iono-elastomer with resistance sensitive to both elongation strain and temperature has been developed by hierarchical self-assembly of an end functionalized triblock copolymer in a protic ionic liquid (ethylammonium nitrate) followed by cross-linking. Small-angle X-ray scattering experiments in situ with uniaxial elongation reveal a nanoscale microstructural transition of the hierarchically self-assembled cross-linked micelles that is responsible for the material's remarkable mechanical and ionic conductivity responses. The results show that the intermicelle distance extends along the deformation direction while the micelles organize into a long-range ordered face-centered-cubic structure during the uniaxial elongation. Besides good cyclability and resistance to selected physical damage, the iono-elastomer simultaneously achieves an unprecedented combination of high stretchability (340%), highly linear resistance vs elongation strain ( R
Publisher: Elsevier BV
Date: 2021
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7TA00009J
Abstract: Graphene-based nanocomposites have been increasingly used for the design of antimicrobial polymeric membranes due to enhanced antibacterial properties.
Publisher: Royal Society of Chemistry (RSC)
Date: 2018
DOI: 10.1039/C7TA10438C
Abstract: An interfacial strategy is developed to fabricate and composite sub-15 nm nanofilms directly on macro-porous substrates for molecular and ionic sieving.
Publisher: Elsevier BV
Date: 08-2016
Publisher: Elsevier BV
Date: 08-2010
Publisher: Royal Society of Chemistry (RSC)
Date: 2023
DOI: 10.1039/D2ME00211F
Abstract: This review summarizes the unique advantages and opportunities offered by the mechanochemical process to generate MOF composites.
Publisher: American Chemical Society (ACS)
Date: 15-10-2021
Publisher: Wiley
Date: 30-06-2016
Abstract: Janus membranes are an emerging class of materials having opposing properties at an interface. This structure results in selective and often novel transport characteristics. In this Minireview, a definition of the Janus membrane, beyond merely asymmetric materials, is introduced and common fabrication strategies are outlined. Also presented are current and potential applications in directional transport, switchable permeation, and performance optimization with detailed mechanisms.
Publisher: Royal Society of Chemistry (RSC)
Date: 2022
DOI: 10.1039/D2CC04054A
Abstract: MOF crystal phase control is made possible through a mechanochemical process.
Location: United Kingdom of Great Britain and Northern Ireland
Start Date: 08-2023
End Date: 08-2026
Amount: $644,398.00
Funder: Australian Research Council
View Funded ActivityStart Date: 12-2023
End Date: 12-2026
Amount: $510,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 04-2019
End Date: 04-2022
Amount: $418,956.00
Funder: Australian Research Council
View Funded ActivityStart Date: 04-2022
End Date: 04-2026
Amount: $772,206.00
Funder: Australian Research Council
View Funded ActivityStart Date: 2023
End Date: 12-2027
Amount: $5,000,000.00
Funder: Australian Research Council
View Funded ActivityStart Date: 10-2023
End Date: 10-2024
Amount: $740,700.00
Funder: Australian Research Council
View Funded ActivityStart Date: 12-2023
End Date: 12-2030
Amount: $34,956,464.00
Funder: Australian Research Council
View Funded Activity