ORCID Profile
0000-0001-7021-6147
Current Organisation
Tohoku University
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Wiley
Date: 07-02-2017
Abstract: Controlling the microstructure of biomass-derived carbon is of essential importance for directing its use. Herein, a hollow spherical carbon (HSC) was prepared from corncob lignin through spray drying and subsequent heat treatment. The HSC, which is characterized by its hierarchically porous structure, delivers high rate capability when it is directly used as electrode material for supercapacitors. This strategy that uses lignin as the precursor avoids the intrinsic difficulty in tuning the microstructure of the biomass-derived carbons and is suitable for mass production for practical use.
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7TA06135H
Abstract: A highly flexible paper electrode with large areal capacitance and superior rate capability was prepared.
Publisher: MyJove Corporation
Date: 24-05-2018
DOI: 10.3791/57144
Publisher: Elsevier BV
Date: 04-2017
Publisher: Royal Society of Chemistry (RSC)
Date: 2017
DOI: 10.1039/C7TA03939E
Abstract: MOF-derived heteroatom (Ni and N)-doped Co/CoO/carbon hybrid with superior sodium storage performance for sodium-ion batteries have been fabricated from bimetallic Ni–Co-ZIF particles through annealing under argon atmosphere at 500 °C.
Publisher: Wiley
Date: 19-04-2018
Abstract: Lithium‐sulfur (Li‐S) batteries are considered as one of the most promising energy storage systems for next‐generation electric vehicles because of their high‐energy density. However, the poor cyclic stability, especially at a high sulfur loading, is the major obstacles retarding their practical use. Inspired by the nacre structure of an abalone, a similar configuration consisting of layered carbon nanotube (CNT) matrix and compactly embedded sulfur is designed as the cathode for Li‐S batteries, which are realized by a well‐designed unidirectional freeze‐drying approach. The compact and lamellar configuration with closely contacted neighboring CNT layers and the strong interaction between the highly conductive network and polysulfides have realized a high sulfur loading with significantly restrained polysulfide shuttling, resulting in a superior cyclic stability and an excellent rate performance for the produced Li‐S batteries. Typically, with a sulfur loading of 5 mg cm −2 , the assembled batteries demonstrate discharge capacities of 1236 mAh g −1 at 0.1 C, 498 mAh g −1 at 2 C and moreover, when the sulfur loading is further increased to 10 mg cm −2 coupling with a carbon‐coated separator, a superhigh areal capacity of 11.0 mAh cm −2 is achieved.
Publisher: Wiley
Date: 30-08-2016
Abstract: Breathable and wearable energy storage is achieved based on an innovative design solution. Carbon nanotube/MnO
No related grants have been discovered for Zheng-Ze Pan.