ORCID Profile
0000-0003-2123-2356
Current Organisation
University of Nottingham Malaysia
Does something not look right? The information on this page has been harvested from data sources that may not be up to date. We continue to work with information providers to improve coverage and quality. To report an issue, use the Feedback Form.
Publisher: Elsevier BV
Date: 05-2023
Publisher: MDPI AG
Date: 02-11-2019
DOI: 10.3390/PR7110794
Abstract: In the present study, amorphous mesoporous silicon oxycarbide materials (SiOC) were successfully synthesized via a low-cost facile method by using potassium hydroxide activation, high temperature carbonization, and acid treatment. The precursors were obtained from floating plants (floating moss, water cabbage, and water caltrops). X-ray diffraction (XRD) results confirmed the amorphous Si–O–C structure and Raman spectra revealed the graphitized carbon phase. Floating moss s le resulted in a rather rough surface with irregular patches and water caltrops s le resulted in a highly porous network structure. The rough surface of the floating moss s le with greater particle size is caused by the high carbon/oxygen ratio (1: 0.29) and low amount of hydroxyl group compared to the other two s les. The pore volumes of these floating moss, water cabbage, and water caltrops s les were 0.4, 0.49, and 0.63 cm3 g−1, respectively, resulting in thermal conductivities of 6.55, 2.46, and 1.14 Wm−1 K−1, respectively. Floating plants, or more specifically, floating moss, are thus a potential material for SiOC production.
Publisher: MDPI AG
Date: 2020
DOI: 10.3390/PR8010039
Abstract: Anaerobic digestion has been widely employed in waste treatment for its ability to capture methane gas released as a product during the digestion. Certain wastes, however, cannot be easily digested due to their low nutrient level insufficient for anaerobic digestion, thus co-digestion is a viable option. Numerous studies have shown that using co-substrates in anaerobic digestion systems improve methane yields as positive synergisms are established in the digestion medium, and the supply of missing nutrients are introduced by the co-substrates. Nevertheless, large-scale implementation of co-digestion technology is limited by inherent process limitations and operational concerns. This review summarizes the results from numerous laboratory, pilot, and full-scale anaerobic co-digestion (ACD) studies of wastewater sludge with the co-substrates of organic fraction of municipal solid waste, food waste, crude glycerol, agricultural waste, and fat, oil and grease. The critical factors that influence the ACD operation are also discussed. The ultimate aim of this review is to identify the best potential co-substrate for wastewater sludge anaerobic co-digestion and provide a recommendation for future reference. By adding co-substrates, a gain ranging from 13 to 176% in the methane yield was accomplished compared to the mono-digestions.
Publisher: Springer Science and Business Media LLC
Date: 16-10-2019
Publisher: Elsevier BV
Date: 04-2020
DOI: 10.1016/J.SCITOTENV.2019.136373
Abstract: Oil and grease, carbohydrate, protein, and lignin are the main constituents of high strength wastewaters such as dairy wastewater, cheese whey wastewater, distillery wastewater, pulp and paper mill wastewater, and slaughterhouse wastewaters. These constituents have contributed to various operational problems faced by the high-rate anaerobic bioreactor (HRAB). During the hydrolysis stage of anaerobic digestion (AD), these constituents can be hydrolyzed. Since hydrolysis is known to be the rate-limiting step of AD, the overall AD can be enhanced by improving the hydrolysis stage. This can be done by introducing pretreatment that targets the degradation of these constituents. This review mainly focuses on the biological pretreatment on various high-strength wastewaters by using different types of enzymes namely lipase, amylase, protease, and ligninolytic enzymes which are responsible for catalyzing the degradation of oil and grease, carbohydrate, protein, and lignin respectively. This review provides a summary of enzymatic systems involved in enhancing the hydrolysis stage and consequently improve biogas production. The results show that the use of enzymes improves the biogas production in the range of 7 to 76%. Though these improvements are highly dependent on the operating conditions of pretreatment and the types of substrates. Therefore, the critical parameters that would affect the effectiveness of pretreatment are also discussed. This review paper will serve as a useful piece of information to those industries that face difficulties in treating their high-strength wastewaters for the appropriate process, equipment selection, and design of an anaerobic enzymatic system. However, more intensive studies on the optimum operating conditions of pretreatment in a larger-scale and synergistic effects between enzymes are necessary to make the enzymatic pretreatment economically feasible.
Publisher: Elsevier BV
Date: 12-2021
Publisher: MDPI AG
Date: 03-06-2021
DOI: 10.3390/PR9060985
Abstract: Microbial fuel cell (MFC) technology has attracted a great amount of attention due to its potential for organic and inorganic waste treatment concomitant with power generation. It is thus seen as a clean energy alternative. Modifications and innovations have been conducted on standalone and hybrid/coupled MFC systems to improve the power output to meet the end goal, namely, commercialization and implementation into existing wastewater treatment plants. As the energy generated is inversely proportional to the size of the reactor, the stacking method has been proven to boost the power output from MFC. In recent years, stacked or scale-up MFCs have also been used as a power source to provide off-grid energy, as well as for in situ assessments. These scale-up studies, however, encountered various challenges, such as cell voltage reversal. This review paper explores recent scale-up studies, identifies trends and challenges, and provides a framework for current and future research.
Publisher: MDPI AG
Date: 14-03-2020
DOI: 10.3390/PR8030337
Abstract: Recently, worldwide researchers have been focusing on exploiting of black soldier fly larval (BSFL) biomass to serve as the feed mediums for farmed animals, including aquaculture farming, in order to assuage the rising demands for protein sources. In this study, yeast was introduced into coconut endosperm waste (CEW) whilst serving as the feeding medium to rear BSFL in simultaneously performed in situ fermentation. It was found that at a 2.5 wt% yeast concentration, the total biomass gained, growth rate and rearing time were improved to 1.145 g, 0.085 g/day and 13.5 days, respectively. In terms of solid waste reduction, the inoculation of yeast over 0.5 wt% in CEW was able to achieve more than 50% overall degradation, with the waste reduction indexes (WRIs) ranging from 0.038 to 0.040 g/day. Disregarding the concentration of yeast introduced, the protein productivity from 20 BSFL was enhanced from only 0.018 g/day (the control) to 0.025 g/day with the presence of yeast at arbitrary concentrations. On the other hand, the larval protein yield was fortified from the control (28%) to a highest value of 35% with the presence of a mere 0.02 wt% yeast concentration. To summarize, the inclusion of a minimal amount of yeast into CEW for in situ fermentation ultimately enhanced the growth of BSFL, as well as its protein yield and productivity.
Publisher: MDPI AG
Date: 28-06-2021
DOI: 10.3390/PR9071124
Abstract: This study highlights an innovative piece of hybrid technology, whereby the combination of anaerobic and aerobic processes into a single reactor, namely, the integrated anaerobic–aerobic bioreactor (IAAB) can surpass the limits of conventional methods treating palm oil mill effluent (POME). Optimisation of IAAB using SuperPro Designer V9 simulator for maximum biogas yield while addressing its economic and environmental trade-offs was conducted for the first time. Parameters such as hydraulic retention time (HRT) and organic loading rate (OLR) were optimised in the anaerobic compartment from 10 days and 6.2 g COD/L day to 9 days and 6.9 g COD/L day, respectively. Furthermore, sludge recycle ratio was optimised from 20% to 50% in the aerobic compartment. The optimisation was successful where the biogas yield increased from 0.24 to 0.29 L CH4/g CODremoved with excellent Chemical Oxygen Demand (COD), and Biological Oxygen Demand (BOD) removal efficiencies up to 99% with 5.8% lower net expenditure. This simulation results were comparable against the pre-commercialized IAAB with 11.4% increase in methane yield after optimisation. Economic analysis had proven the optimised process to be feasible, resulting in return on investment (ROI), payback time, and internal rate of return (IRR) of 24.5%, 4.1 years, and 17.9%, respectively.
No related grants have been discovered for Yi Jing Chan.