Dual input clutchless power-shifting transmission for hybrid vehicles. This project studies a newly proposed clutchless power-shifting transmission (CPT) for hybrid and electric vehicle applications. It aims to design new methods and actuators for power-on gear change to realise the best possible performance of the CPT, and through simulation and experimentation evaluate the system performance and response under both steady state and transient conditions. The proposed transmission is expected to ....Dual input clutchless power-shifting transmission for hybrid vehicles. This project studies a newly proposed clutchless power-shifting transmission (CPT) for hybrid and electric vehicle applications. It aims to design new methods and actuators for power-on gear change to realise the best possible performance of the CPT, and through simulation and experimentation evaluate the system performance and response under both steady state and transient conditions. The proposed transmission is expected to significantly reduce the efficiency losses present in modern vehicles and establish new techniques for achieving gear and mode changes that do not rely on friction clutches. It is anticipated that these novel technologies will provide new direction for developing the next generation of very high efficiency automotive power train technologies.Read moreRead less
Renewable energy generation from flow-induced vibration. Much engineering effort has been expended to eliminate vibration of marine structures. This project seeks to provide the basis for the development of tidal energy harnessing, by deliberately amplifying and harnessing vibration. This technology offers the promise of capturing clean, zero-emissions energy, while presenting no risk to marine life.
Magnetorheological Elastomer Based Tuned Mass Damper. This project aims to protect buildings utilising an advanced tuned mass damper (TMD) which has characteristics of adaptability, is energy and sensor free and has negative stiffness via the integration of magnetorheological elastomers, a self-sensing self-powered element and negative stiffness technologies. This project expects to theoretically and experimentally study the performance of the TMD on structural protection from wind loads and ear ....Magnetorheological Elastomer Based Tuned Mass Damper. This project aims to protect buildings utilising an advanced tuned mass damper (TMD) which has characteristics of adaptability, is energy and sensor free and has negative stiffness via the integration of magnetorheological elastomers, a self-sensing self-powered element and negative stiffness technologies. This project expects to theoretically and experimentally study the performance of the TMD on structural protection from wind loads and earthquakes. The expected outcomes of this project will advance TMD practice and structural protection technology, and benefit the building protection industry, both domestically and globally. This will provide significant benefits to the working efficiency and safety of building occupants.Read moreRead less
Electromagnetically Interconnected Suspension for Electrified Vehicles . This project aims to develop an innovative, electromagnetically interconnected suspension system to enhance vehicle ride comfort, stability and handling dynamics, and thus safety of electrified vehicles. Specifically, the project integrates a set of novel electromagnetic shock absorbers to form an effective electrical network so as to realise an electromagnetically interconnected suspension system. Advanced integrated con ....Electromagnetically Interconnected Suspension for Electrified Vehicles . This project aims to develop an innovative, electromagnetically interconnected suspension system to enhance vehicle ride comfort, stability and handling dynamics, and thus safety of electrified vehicles. Specifically, the project integrates a set of novel electromagnetic shock absorbers to form an effective electrical network so as to realise an electromagnetically interconnected suspension system. Advanced integrated control techniques can then be applied to improve vehicle performance and dynamics in three planes. The project will assist the rapid development of transportation electrification. The outcomes from this project will lead to tangible improvements in vehicle comfort and safety.Read moreRead less
Machine Learning and Shape Optimisation of Fluid-Structure Interactions. This project aims to address vibrations of solid structures by utilising a combination of advanced experimental and computational methods. This project expects to generate new knowledge in the area of flow-induced vibrations utilising the new techniques of machine learning and evolutionary shape optimisation. Expected outcomes of this project include greatly accelerated discovery of mechanisms leading to structural vibratio ....Machine Learning and Shape Optimisation of Fluid-Structure Interactions. This project aims to address vibrations of solid structures by utilising a combination of advanced experimental and computational methods. This project expects to generate new knowledge in the area of flow-induced vibrations utilising the new techniques of machine learning and evolutionary shape optimisation. Expected outcomes of this project include greatly accelerated discovery of mechanisms leading to structural vibrations and optimising structure geometries to either enhance or suppress the vibrations. This should provide significant benefits, such as the design strategies for improved energy harvesters, such as current oscillators, or more stable structures, such as platforms for offshore wind turbines.
Read moreRead less
Development of novel inerter-based damper for platform vibration control. This project aims to develop a novel inerter-based damper to mitigate the excessive vibrations of offshore floating platforms (OFP), which are widely used in the offshore industry for oil exploration. Harsh environmental loads such as wind and waves can induce excessive vibrations to OFPs and endanger their safety and stability. This project aims to develop a novel inerter-based damper that can produce a considerable appar ....Development of novel inerter-based damper for platform vibration control. This project aims to develop a novel inerter-based damper to mitigate the excessive vibrations of offshore floating platforms (OFP), which are widely used in the offshore industry for oil exploration. Harsh environmental loads such as wind and waves can induce excessive vibrations to OFPs and endanger their safety and stability. This project aims to develop a novel inerter-based damper that can produce a considerable apparent mass that is much larger than its physical mass through an amplifying mechanism by translating the linear motion into high-speed rotational motion, which can significantly reduce the mass and cost of the damper. Benefits of the project include more economical and safer OFP designs, which are expected to improve the competitiveness of Australian pillar oil and gas industries.Read moreRead less
A new role for vibration analysis in gear wear modelling and prediction. This project aims to improve prediction of the remaining useful life of gears. Gears are widely used in industry and transport. This project aims to integrate the two main methods of gear condition monitoring, vibration and oil analysis, and perform model-based wear prediction with the tribology and dynamic models continually updated on the basis of measured wear debris and vibration. New signal processing tools should allo ....A new role for vibration analysis in gear wear modelling and prediction. This project aims to improve prediction of the remaining useful life of gears. Gears are widely used in industry and transport. This project aims to integrate the two main methods of gear condition monitoring, vibration and oil analysis, and perform model-based wear prediction with the tribology and dynamic models continually updated on the basis of measured wear debris and vibration. New signal processing tools should allow estimation of relatively weak friction forces, previously neglected, as an important prognostic tool. This would allow detailed root cause analysis and prediction of remaining useful life. Improvements in gear prognosis would have safety and economic benefits by eliminating unforeseen catastrophic failures and optimising maintenance schedules.Read moreRead less
Flow-induced vibration of slender structures and its control. This project aims to expand substantially the state of knowledge on the flow-induced vibrations of bluff, slender structures such as cylinders, beams, and cables. A framework is expected to be developed that describes the flow-induced vibration of these structures systematically, adding new data and drawing links between previously disparate areas of research. The significance of such a framework is great, as not only is flow-induced ....Flow-induced vibration of slender structures and its control. This project aims to expand substantially the state of knowledge on the flow-induced vibrations of bluff, slender structures such as cylinders, beams, and cables. A framework is expected to be developed that describes the flow-induced vibration of these structures systematically, adding new data and drawing links between previously disparate areas of research. The significance of such a framework is great, as not only is flow-induced vibration a problem in many engineering applications (such as marine oil risers, chimneys, and bridges) it can also be exploited for renewable energy generation. Control mechanisms are also expected to be developed to maximise the energy generation potential.Read moreRead less
Fluid-Structure Interactions in Flows through Flexible-Walled Channels. This project seeks to deliver a definitive understanding of the behaviour of steady and pulsating fluid flow through compliant-walled channels and pipes. Novel theoretical stability-analyses and experimental investigations, complemented by targeted numerical simulations, will be developed and used to identify and categorise fluid- and wall-based wave-disturbances and their interactions. This can underpin the development of t ....Fluid-Structure Interactions in Flows through Flexible-Walled Channels. This project seeks to deliver a definitive understanding of the behaviour of steady and pulsating fluid flow through compliant-walled channels and pipes. Novel theoretical stability-analyses and experimental investigations, complemented by targeted numerical simulations, will be developed and used to identify and categorise fluid- and wall-based wave-disturbances and their interactions. This can underpin the development of technologies that control these flows to advantage in both engineered fluid-flow and biologically occurring systems. Robust design guidelines will emerge to safeguard and enhance the use of compliant liners and flexible panels for drag and noise reductions, or to protect surfaces exposed to fluid flows. Read moreRead less
Ultra-high spectral purity lasers for tests of relativity and atomic clocks. Measurement precision is the key to advancement of a technological society. This project aims to build the most precise measurement tool ever developed: one capable of delivering 17 digits of precision in just 1 second. In conjunction with German and French colleagues this too will be used to test the foundation theories of physics.